I did this script
#!/bin/bash
liste=`ls -l`
for i in $liste
do
echo $i
done
The problem is I want the script displays each result line by line, but it displays word by word :
I have :
my_name
etud
4096
Oct
8
10:13
and I want to have :
my_name etud 4096 Oct 8 10:13
The final aim of the script is to analyze each line ; it is the reason I want to be able to recover the entire line. Maybe the list is not the best solution but I don't know how to recover the lines.
To start, we'll assume that none of your filenames ever contain newlines:
ls -l | IFS= while read -r line; do
echo "$line"
# Do whatever else you want with $line
done
If your filenames could contain newlines, things get tricky. In this case, it's better (although slower) to use stat to retrieve the desired metadata from each file individually. Consult man stat for details about how your local variety of stat works, as it is unfortunately not very standardized.
for f in *; do
line=$(stat -c "%U %n %s %y" "$f") # One possibility
# Work with $line as if it came from ls -l
done
You can replace
echo $i
with
echo -n "$i "
echo -n outputs to console without newline.
Another to do it with a while loop and without a pipe:
#!/bin/bash
while read line
do
echo "line: $line"
done < <(ls -l)
First, I hope that you aren't genuinely using ls in your real code, but only using it as an example. If you want a list of files, ls is the wrong tool; see http://mywiki.wooledge.org/ParsingLs for details.
Second, modern versions of bash have a builtin called readarray.
Try this:
readarray -t my_array < <(ls -l)
for entry in "${my_array[#]}"; do
read -a pieces <<<"$entry"
printf '<%s> ' "${pieces[#]}"; echo
done
First, it creates an array (called my_array) with all the output from the command being run.
Then, for each line in that output, it creates an array called pieces, and emits each piece with arrow brackets around them.
If you want to read a line at a time, rather than reading the entire file at once, see http://mywiki.wooledge.org/BashFAQ/001 ("How can I read a file (data stream, variable) line-by-line (and/or field-by-field)?")
Joinning the previous answers with the need to store the list of files in a variable. You can do this
echo -n "$list"|while read -r lin
do
echo $lin
done
Related
Hi guys I got this bash one line that i wish to make a script
for i in 'ls *.fastq.gz'; do echo $(zcat ${i} | wc -l)/4|bc; done
I would like to make it as a script to read from a data dir and print out the result with the name of the file.
I tried to put the dir in front of the 'data/*.fastq.gz' but got am error No such dir exist...
I would like some like this:
name1.fastq.gz 1898516
name2.fastq.gz 2467421
namen.fastq.gz 1234532
I am not experienced in bash.
Could you guys give a help?
Thanks
Take the dir as an argument, but default to the current dir if it's not set.
dir="${1-.}"
Then put it in the glob: "$dir"/*.fastq.gz
As well:
Quote variables and command expansions.
Don't parse ls.
Don't trust echo with arbitrary data (filenames). Use printf instead.
Use an end-of-options flag -- when giving filenames to commands.
I prefer to not have any inline command expansions, but that's just personal preference
Putting it together:
#!/bin/bash
dir="${1-.}"
for file in "$dir"/*.fastq.gz; do
printf '%s ' "$file"
lines="$(zcat -- "$file" | wc -l)"
bc <<< "$lines/4" # Using a here-string (Bash feature)
done
There is no need to escape to bc for integer math (divide by 4), or to use 'ls' to enumerate the files. The original version will do with minor changes:
#!/bin/bash
dir="${1-.}"
for i in "$dir"/*.fastq.gz; do
lines=$(zcat "${i}" | wc -l)
printf '%s %d\n' "$i" "$((lines/4))"
done
A script takes a URL, parses it for the required fields, and redirects its output to be saved in a file, file.txt. The output is saved on a new line each time a field has been found.
file.txt
A Cat
A Dog
A Mouse
etc...
I want to take file.txt and create an array from it in a new script, where every line gets to be its own string variable in the array. So far I have tried:
#!/bin/bash
filename=file.txt
declare -a myArray
myArray=(`cat "$filename"`)
for (( i = 0 ; i < 9 ; i++))
do
echo "Element [$i]: ${myArray[$i]}"
done
When I run this script, whitespace results in words getting split and instead of getting
Desired output
Element [0]: A Cat
Element [1]: A Dog
etc...
I end up getting this:
Actual output
Element [0]: A
Element [1]: Cat
Element [2]: A
Element [3]: Dog
etc...
How can I adjust the loop below such that the entire string on each line will correspond one-to-one with each variable in the array?
Use the mapfile command:
mapfile -t myArray < file.txt
The error is using for -- the idiomatic way to loop over lines of a file is:
while IFS= read -r line; do echo ">>$line<<"; done < file.txt
See BashFAQ/005 for more details.
mapfile and readarray (which are synonymous) are available in Bash version 4 and above. If you have an older version of Bash, you can use a loop to read the file into an array:
arr=()
while IFS= read -r line; do
arr+=("$line")
done < file
In case the file has an incomplete (missing newline) last line, you could use this alternative:
arr=()
while IFS= read -r line || [[ "$line" ]]; do
arr+=("$line")
done < file
Related:
Need alternative to readarray/mapfile for script on older version of Bash
You can do this too:
oldIFS="$IFS"
IFS=$'\n' arr=($(<file))
IFS="$oldIFS"
echo "${arr[1]}" # It will print `A Dog`.
Note:
Filename expansion still occurs. For example, if there's a line with a literal * it will expand to all the files in current folder. So use it only if your file is free of this kind of scenario.
Use mapfile or read -a
Always check your code using shellcheck. It will often give you the correct answer. In this case SC2207 covers reading a file that either has space separated or newline separated values into an array.
Don't do this
array=( $(mycommand) )
Files with values separated by newlines
mapfile -t array < <(mycommand)
Files with values separated by spaces
IFS=" " read -r -a array <<< "$(mycommand)"
The shellcheck page will give you the rationale why this is considered best practice.
You can simply read each line from the file and assign it to an array.
#!/bin/bash
i=0
while read line
do
arr[$i]="$line"
i=$((i+1))
done < file.txt
This answer says to use
mapfile -t myArray < file.txt
I made a shim for mapfile if you want to use mapfile on bash < 4.x for whatever reason. It uses the existing mapfile command if you are on bash >= 4.x
Currently, only options -d and -t work. But that should be enough for that command above. I've only tested on macOS. On macOS Sierra 10.12.6, the system bash is 3.2.57(1)-release. So the shim can come in handy. You can also just update your bash with homebrew, build bash yourself, etc.
It uses this technique to set variables up one call stack.
Make sure set the Internal File Separator (IFS)
variable to $'\n' so that it does not put each word
into a new array entry.
#!/bin/bash
# move all 2020 - 2022 movies to /backup/movies
# put list into file 1 line per dir
# dirs are "movie name (year)/"
ls | egrep 202[0-2] > 2020_movies.txt
OLDIFS=${IFS}
IFS=$'\n' #fix separator
declare -a MOVIES # array for dir names
MOVIES=( $( cat "${1}" ) ) // load into array
for M in ${MOVIES[#]} ; do
echo "[${M}]"
if [ -d "${M}" ] ; then # if dir name
mv -v "$M" /backup/movies/
fi
done
IFS=${OLDIFS} # restore standard separators
# not essential as IFS reverts when script ends
#END
A script takes a URL, parses it for the required fields, and redirects its output to be saved in a file, file.txt. The output is saved on a new line each time a field has been found.
file.txt
A Cat
A Dog
A Mouse
etc...
I want to take file.txt and create an array from it in a new script, where every line gets to be its own string variable in the array. So far I have tried:
#!/bin/bash
filename=file.txt
declare -a myArray
myArray=(`cat "$filename"`)
for (( i = 0 ; i < 9 ; i++))
do
echo "Element [$i]: ${myArray[$i]}"
done
When I run this script, whitespace results in words getting split and instead of getting
Desired output
Element [0]: A Cat
Element [1]: A Dog
etc...
I end up getting this:
Actual output
Element [0]: A
Element [1]: Cat
Element [2]: A
Element [3]: Dog
etc...
How can I adjust the loop below such that the entire string on each line will correspond one-to-one with each variable in the array?
Use the mapfile command:
mapfile -t myArray < file.txt
The error is using for -- the idiomatic way to loop over lines of a file is:
while IFS= read -r line; do echo ">>$line<<"; done < file.txt
See BashFAQ/005 for more details.
mapfile and readarray (which are synonymous) are available in Bash version 4 and above. If you have an older version of Bash, you can use a loop to read the file into an array:
arr=()
while IFS= read -r line; do
arr+=("$line")
done < file
In case the file has an incomplete (missing newline) last line, you could use this alternative:
arr=()
while IFS= read -r line || [[ "$line" ]]; do
arr+=("$line")
done < file
Related:
Need alternative to readarray/mapfile for script on older version of Bash
You can do this too:
oldIFS="$IFS"
IFS=$'\n' arr=($(<file))
IFS="$oldIFS"
echo "${arr[1]}" # It will print `A Dog`.
Note:
Filename expansion still occurs. For example, if there's a line with a literal * it will expand to all the files in current folder. So use it only if your file is free of this kind of scenario.
Use mapfile or read -a
Always check your code using shellcheck. It will often give you the correct answer. In this case SC2207 covers reading a file that either has space separated or newline separated values into an array.
Don't do this
array=( $(mycommand) )
Files with values separated by newlines
mapfile -t array < <(mycommand)
Files with values separated by spaces
IFS=" " read -r -a array <<< "$(mycommand)"
The shellcheck page will give you the rationale why this is considered best practice.
You can simply read each line from the file and assign it to an array.
#!/bin/bash
i=0
while read line
do
arr[$i]="$line"
i=$((i+1))
done < file.txt
This answer says to use
mapfile -t myArray < file.txt
I made a shim for mapfile if you want to use mapfile on bash < 4.x for whatever reason. It uses the existing mapfile command if you are on bash >= 4.x
Currently, only options -d and -t work. But that should be enough for that command above. I've only tested on macOS. On macOS Sierra 10.12.6, the system bash is 3.2.57(1)-release. So the shim can come in handy. You can also just update your bash with homebrew, build bash yourself, etc.
It uses this technique to set variables up one call stack.
Make sure set the Internal File Separator (IFS)
variable to $'\n' so that it does not put each word
into a new array entry.
#!/bin/bash
# move all 2020 - 2022 movies to /backup/movies
# put list into file 1 line per dir
# dirs are "movie name (year)/"
ls | egrep 202[0-2] > 2020_movies.txt
OLDIFS=${IFS}
IFS=$'\n' #fix separator
declare -a MOVIES # array for dir names
MOVIES=( $( cat "${1}" ) ) // load into array
for M in ${MOVIES[#]} ; do
echo "[${M}]"
if [ -d "${M}" ] ; then # if dir name
mv -v "$M" /backup/movies/
fi
done
IFS=${OLDIFS} # restore standard separators
# not essential as IFS reverts when script ends
#END
I have that sample script:
#!/bin/sh
while read ll </dev/fd/4; do
echo "1 "$ll
while read line; do
echo $line
read input </dev/fd/3
echo "$input"
done 3<&0 <notify-finished
done 4<output_file
Currently The first loop do not iterate just stays on line 1. How do I fix that without bashisms because it has to be highly portable. Thanks.
Your code already has bashisms. Here, I'm taking them out (and simplifying the FD handling for better readability):
#!/bin/sh
while read ll <&4; do # read from output_file
printf '%s\n' "1 $ll"
while read line <&3; do # read from notify-finished
printf '%s\n' "$line"
read input # read from stdin
printf '%s\n' "$input"
done 3<notify-finished
done 4<output_file
Run the script as follows:
echo "output_file" >output_file
echo "notify-finished" >notify-finished
echo "stdout" | ./yourscript
...and it correctly exits with the following output:
1 output_file
notify-finished
stdout
Notes:
echo's behavior is wildly nonportable across POSIX platforms. See the APPLICATION USAGE section of the POSIX spec for echo, which advises using printf instead.
/dev/fd/## is not specified by POSIX; it is an extension made available both by Linux distributions (creating a symlink to /proc/self/fd -- /proc being itself an unspecified extension) and by bash itself. Use <&4 in place of </dev/fd/4.
You probably want to use the -r argument to read -- which is POSIX-specified, and prevents the default behavior of treating backslashes as escape sequences for newlines and characters in IFS. Without it, foo\bar is read as foobar, thus not reading your data as it truly exists in its input sources.
This question already has answers here:
Closed 11 years ago.
Possible Duplicate:
Unix for loop help please?
I am trying to list the names of all the files in a directory separated by a blank line. I was using a for loop but after trying a few examples, none really work by adding blank lines in between. Any ideas?
Is there any command which outputs only the first line of a file in unix? How could I only display the first line?
for i in ls
do
echo "\n" && ls -l
done
for i in ls
do
echo "\n"
ls
done
Use head or sed 1q to display only the first line of a file. But in this case, if I'm understanding you correctly, you want to capture and modify the output of ls.
ls -l | while read f; do
printf '%s\n\n' "$f"
# alternately
echo "$f"; echo
done
IFS="
"
for i in $(ls /dir/name/here/or/not)
do
echo -e "$i\n"
done
To see the first part of a file use head and for the end of a file use tail (of course). The command head -n 1 filename will display the first line. Use man head to get more options. (I know how that sounds).
Use shell expansion instead of ls to list files.
for file in *
do
echo "$file"
echo
if [ -f "$file" ];then
read firstline < "$file"
echo "$firstline" # read first line
fi
done