my Firefox addon shall add a search engine, that
provides suggestions
gets its search template URL specified on runtime (i.e.: template URL depends on the preferences of the user)
And I don't see a way to do both at the same time.
I see two options to add a search engine:
addEngineWithDetails
addEngine
addEngineWithDetails() allows me to add a search engine with the template URL. But it does (apparently?) not allow to provide a suggestions URL.
addEngine() allows me to add a search engine that is specified in an XML file. But if have that file saved locally in my addon directory (e.g. chrome://example-engine/content/search.xml), how can I change the template URL on runtime? And using an online XML is an unsafe options since the internet connection could be broken or bad during the addon install.
First fo all, you're right, addEngineWithDetails does not support suggestions.
The way to go would be to use addEngine (and removeEngine).
As for the "dynamic" part of your question: While I didn't test it, the implementation seems to happily accept data: URIs. So you could:
Construct a data URI using whatever methods you like (even constructing a full XML DOM and serializing it).
Call addEngine with the data URI.
When the user changes a pref, remove the old engine, and construct a new one.
Related
I am using gradle 6.8 and MarkLogic version is 10.0-5.2,
My XQuery code is in directory \ml-gradle\src\main\common. When I run the command mlLoadModules to load XQuery into the modules database it loads with default URI /common/test.xqy.
I want to add some prefix to the URIs e.g. /rsc/common/test.xqy. How can I achieve that?
Note: I don't want to create an extra folder in my source for prefix "rsc".
It's not supported, though you could write a custom Gradle task to change the URI to whatever you like.
Why do you not want to create an "rsc" folder above "common"? I think other developers would find it much more intuitive that "rsc/common/test.xqy" becomes "/rsc/common/test.xqy" when loaded, rather than "common/test.xqy" becomes "rsc/common/test.xqy", which begs the question - where is "rsc" coming from? And then that developer would need to understand what property / custom code is adding that "rsc".
I am trying to replace a production js file on a site with a local copy of it so I can set my own event listeners and control the layout of the page as needed. A lot of old stackoverflow answers suggest using fiddler to do that, but apparently the UI has changed since then. I have added the file I want changed to the autoresponder list but it does not have an option to return a file. The closest I've gotten is return a manual response which I have to copy and paste a 50k line javascript file every time. Can I get a more detailed explanation of how to do this in the new UI or was this removed from the free version of Fiddler Everywhere?
You can use the Auto Responder and create a rule that uses an external file. The file could contain the whole mocked response including the references (or the content) of the JS script.
To achieve the above use the last action from the Action drop-down which is named Choose saved response file ... (see more about the actions in this article).
The Google Drive API v2 to v3 migration guide says:
The exportLinks field has been removed from files. To export Google Documents, use the files.export method instead.
I don't want to export (download) the file right away. "files.export" will actually download the file. I want a link to download the file, later. This was possible in v2 by means of the exportLinks.
How can I in v3 accomplish the same? If it is not possible, why was this useful feature removed?
Besides, (similar problem to above) downloadUrl was also removed, and the suggested alternative ("files.get with ?alt=media") downloads the file instead of providing a download link. This means there is no way in v3 to get a public short lived URL for a file?
EDIT:
there is no way in v3 to get a public short lived URL for a file?
For regular files, apparently yes.
This seems to work fine (a public short lived link to the file with its right name and contents):
https://www.googleapis.com/drive/v3/files/ID?alt=media&access_token=TOKEN
For google apps files, no (not even private, as v2 exportLinks used to be).
https://www.googleapis.com/drive/v3/files/ID/exportmimeType=TYPEv&access_token=TOKEN
Similar to regular files, this URL is a short lived link to the file contents, but lacking of its right name.
BTW, I see the API is not behaving consistently: /drive/v3/files/FILEID delivers the right file name, but /drive/v3/files/FILEID/export does not.
I think the API itself should be setting the right Content-Disposition, as it is apparently doing when issuing a /drive/v3/files/FILEID call.
This file naming problem invalidates the workaround to the lack of ExportLinks in v3.
The v2 ExportLinks allowed me to link a file (which is not the same as getting its content right away). Anyone logged in and with the proper permissions was able to access it, and the link didn't needed any access_token, and it wasn't short lived. It was good and useful.
Building a link with a raw API call like /drive/v3/files/FILEID/export (with mandatory access_token) would be an close enough workaround (it is temporary and public, not the same as it was, anyway). However, the naming problem invalidates it.
In v2, regular files have a WebContentLink and google apps files have exportLinks. In v3 exportLinks are gone, and I don't see any suitable alternative to them.
Once you query for your file by id you can use the function getWebContentLink() to get the download link of the file (eg. $file->getWebContentLink() ).
I think you're placing too much emphasis on the word "method".
There is still a link to export a file, it's https://www.googleapis.com/drive/v3/files/fileIdxxxxx/export&mimeType=xxxxx/xxxxx. Make sure you URL encode the mime type.
Eg
https://www.googleapis.com/drive/v3/files/1fGBQ81haNU_nEiC5GITZD3bxT0ppL2LHg-C0ubD4Q_s/export?mimeType=text/csv&access_token=ya29.Gmo0BMvO-pVEPKsiD9j4D-NZVGE91MChRvwOcBSg3cTHt5uAClf-jFxcovQScbO2QQhwHS95eSGW1eQQcK5G1UQ6oI4BFEJJkntEBkgriZ14GbHuvpDL7LT2pKA--WiPuNoDDIuZMm5lWtlr
These links form part of the API, so the expectation is that you've written a client that sends authenticated requests, and deals with the response data. This explains why, if you simply paste the link into a browser without an access_token, it will fail. It also explains why the filename is export, ie. it isn't intended that your client would ever use a filename, but rather it should receive the data as a stream. This SO answer discusses the situation in more detail How to set name of file downloaded from browser?
Is there a way to see TeamCity configurations that override parameter defined in template?
I don't think so. What's worked for me in the past was to search through the project files on the filesystem. If you have many build configs, this will be faster than opening each of them in the GUI.
Search for something like this:
<param name="myParamInheritedFromTemplate" value="myOverrideValue" />
in <TeamCity data directory>/config/projects/**/*.xml. If it's absent in an XML file, that build config just inherits the value. If it's present, it overrides it.
It's hacky but it's quick.
There is a feature request https://youtrack.jetbrains.com/issue/TW-21212, please vote. Current workaround are to either search the raw XML files with the settings stored under TeamCity Data Directory on the server as #sferencik suggested, or use REST API to get settings of all the build configurations and search for the parameter there. Let me know if you need help on any of these.
I'm developing an API Server in Go and the server (at the moment) handles all translations for clients. When an API client fetches particular data it also asks for the translations that are available for the given section.
Ideally I want to have the following folder structure:
/messages
/home.en
/home.fr
/home.sv
/news.en
/news.fr
/news.sv
Where news and home are distinct modules.
Now the question I have for Revel is is it possible to fetch ALL language strings for a given module and given locale? For example pull all home strings for en-US.
EDIT:
I would like the output (something I can return to the client) a key:value string of translations.
Any guidance would be appreciated.
It seems to me that revel uses messaged based translation (just like gettext does), so you need
the original string to get the translation. These strings are stored in Config objects,
which are themselves stored in messages of i18n.go, sorted by language.
As you can see, this mapping is not exported, so you can't access it. The best way
to fix this is to write a function for what you want (getting the config by supplying a language)
or exporting one of the existing functions and create a pull request for revel.
You may workaround this by copying the code of loadMessageFile or by forking your version
of revel and exporting loadMessageFile or parseMessagesFile. This also is a great opportunity
to create a pull request.
Note that the localizations are stored in a INI file format parsed by robfig/config,
so manually parsing is also an option (although not recommended).