I am using Windows 7
How can i run an input file (text file of commands) in an exe progam in CMD please.
Using other questions on the site, i have tried:
CMD /c ""C:/Program Files/Mplus/Mpluswin.exe" "C:/Users/jj/Desktop/mplus/test_mplus.inp""
which opens the input file in the program but does not run it
and this, which opens the program, but not the script
CMD /c "C:/Program Files/Mplus/Mpluswin.exe" < "C:/Users/jj/Desktop/mplus/test_mplus.inp"
Does this depend on the exe program?
Edit:
At present, the first command above launches the exe program and opens the text file within it (this is a file of program specific commands that will read in data, run calculations and output automatically). I can then run the commands in the exe program that has been opened (by selecting run in a menu) . But, I would like to pass the file to the exe program and it to be run automatically, ideally in the background. I am not sure of the correct terminology to use, so sorry if my description is unclear.
I've just noticed that you enclosed the entire term in an extra set of double quotes, and used linux forward slashes - try this batch file and also see if there is any error message on the console.
#echo off
cd /d "%userprofile%\Desktop\mplus"
"C:\Program Files\Mplus\Mpluswin.exe" "test_mplus.inp"
echo mplus was launched
pause
Related
I am a streamer and I need a few programs to stream. It's annoying to open all of them so I tried putting them in a batch file. I looked up the process and followed it,but every time I run the batch file it comes back invalid.
This is what my batch file looks like:
#echo off
cd C:\Program Files "(x86)\obs-studio\bin\64bit"
start obs64.exe
#echo off
cd "C:\Program Files\HexChat"
start hexchat.exe
#echo off
cd "C:\Program Files (x86)\Nightbot"
start nightbot.exe
exit
Cmd gives me an error saying it cannot find the file. When I put this into cmd by itself it opens the program.
Also is there a way to add applications from chrome to the file?
Open a command prompt window and run from within this window start /? which outputs the help for this command and explaining all options.
Following batch file most likely works:
#echo off
start "" "%ProgramFiles(x86)%\obs-studio\bin\64bit\obs64.exe"
start "" "%ProgramFiles%\HexChat\hexchat.exe"
start "" "%ProgramFiles(x86)%\Nightbot\nightbot.exe"
This batch file starts the three applications with current directory on execution of the batch file being also the current directory for the 3 started applications.
But the following batch file should be used if it is really necessary that each application is started with the application's directory as current directory:
#echo off
start "" /D"%ProgramFiles(x86)%\obs-studio\bin\64bit" obs64.exe
start "" /D"%ProgramFiles%\HexChat" hexchat.exe
start "" /D"%ProgramFiles(x86)%\Nightbot" nightbot.exe
With parameter /D and path of application's folder the Start In directory is set first like when using command CD. So for example hexchat.exe is started with current directory being C:\Program Files\HexChat for this application.
The two double quotes after command START are necessary as this command interprets first double quoted string as title for the process. By using "" an empty title string is explicitly specified resulting in rest of command line being correct interpreted as expected. I suppose those three applications are all GUI applications and not console applications and therefore a real title string being useful on running a console application in an new command process for the console window is not really necessary.
%ProgramFiles% references the predefined environment variable ProgramFiles containing path to standard program files folder for 64-bit applications on 64-bit Windows when batch file is started with 64-bit cmd.exe as default on 64-bit Windows and is replaced by Windows command interpreter before execution of the command line on your Windows computer by C:\Program Files.
%ProgramFiles(x86)% references the predefined environment variable ProgramFiles(x86) containing always path to standard program files folder for 32-bit applications on 64-bit Windows and is replaced by Windows command interpreter before execution of the command line on your Windows computer by C:\Program Files (x86).
It is of course also possible to use the real paths in your computer instead of the environment variable references if this batch file is never shared with other people.
Extra hint:
Run in a command prompt window the command you want to use with /? as parameter to get displayed the help for this command. Other sources for help on commands and predefined environment variables displayed all on running in a command prompt window set are:
SS64.com - A-Z index of the Windows CMD command line
Microsoft's command-line reference
Windows Environment Variables and WOW64 Implementation Details
For my work I have to run a string in "run".
I want to make this in a bat file but the arguments are not used but without them the program will not run.
This is the string:
"C:\Program files (x86)\MicroTouch\MT7\TwUI.exe" TwUICP.dll CPMain
Can someone help me with this problem?
You can simply put the same line of code into your bat file:
"C:\Program files (x86)\MicroTouch\MT7\TwUI.exe" TwUICP.dll CPMain
There are some options you can use. For example if you want the program to run hidden in background you can add start /b before the line. start /w will make the cmd window stay open and wait for your program to finish. You can even definde which CPU cores the program should use. For more information open the console and type start /? or check out http://ss64.com/nt/start.html.
Have the same problem, same software i think...
"C:\Program Files (x86)\MicroTouch\MT 7\TwUI.exe" twuicp.dll CPMain
Running that line through task manager -> new task will open a tool to configure touch-screen options, calibrate, etc...
Well same line doesnt work in a bat or cmd file. If i try to launch this tool through cmd.exe it doesnt work either.
The answer is always the same:
USAGE: twui <DLL name> <UI symbol name>
This works, but same line in cmd.exe dont
In windows,I use the Notepad++ to write tex file, in the "run..." dialog,I input that:
cmd /k D:\CTEX\MiKTeX\miktex\bin\xelatex $(FULL_CURRENT_PATH)
then run it,however the result shows that 'xdvipdfmx' is not an executable file. But I am sure that I have add its path to the system environment variable,and when I direct run it in the terminal, it's ok.
So,I want to know what I should do to run it in the notepad++ correctly.
Try these improvements:
enclose paths into quotes to avoid problems with spaces
add .exe to executable file name
test the full command in command prompt to see if it works (replace $(FULL_CURRENT_PATH)) with actual file name
please let me know the result
Your example after changes:
cmd /k "D:\CTEX\MiKTeX\miktex\bin\xelatex.exe" "$(FULL_CURRENT_PATH)"
Test it in command prompt like:
cmd /k "D:\CTEX\MiKTeX\miktex\bin\xelatex.exe" "D:\Data\MyDoc1.tex"
[Context: I'm trying to create a shortcut to a .bat file with a relative "Start in" path as roughly described here and here.]
cmd.exe supports the /c switch. According to the documentation, this should cause it to "carry out the command and then terminate."
But the switch seems to be ignored when the command is a .bat file.
For example, if you create a shortcut with the following Target (to a normal, non-bat command):
C:\Windows\System32\cmd.exe /c "START /d C:\temp\ notepad.exe test.txt"
Everything works as expected: Notepad opens and the console (shell) disappears. But if you replace the command above with a .bat file instead, like so:
C:\Windows\System32\cmd.exe /c "START /d C:\temp\ C:\test.bat"
(where test.bat contains only "notepad.exe test.txt") Notepad opens as before but the console sticks around like an unwanted friend. Why? And more to the point, How do I make it go away?
UPDATE: I know I can use wscript, as in this solution, but then I lose the option of having a custom icon (I'm stuck with the default .vbs icon).
The start command begins a new process for the batch file. The original cmd.exe then terminates, but leaves the new process, which hangs around because it's waiting for notepad.exe to terminate.
Change your bat file contents to:
start "" notepad.exe test.txt
Then your batch file will not wait for notepad to exit before continuing execution.
Another thing to try:
C:\Windows\System32\cmd.exe /c "START /d C:\temp\ C:\test.bat & exit"
The nuclear option would be to write a small program in the (compiled) language of your choice that launches the .bat file and then exits. Then you can give it a custom icon, and make it do whatever you like.
You might also take a look at Autoit from http://autoitscript.com as an alternative to batch. - the Run() command can do this kind of thing with better predictability. Since it makes an executable you can link this from a shortcut directly. You can also do a whole lot more of course, like run as a different user, insert delays or handle errors, that are hard to do with batch.
You don't need the full kit, just the Aut2EXE folder from the download will do.
BTW, build your exes without UPX compression as that leads to AV false positives.
I'm a little late but here is the answer.
The documentation for start states:
Syntax
START "title" [/D path] [options] "command" [parameters]
If command is an internal cmd command or a batch file then the command
processor is run with the /K switch to cmd.exe. This means that the
window will remain after the command has been run.
If start is used to execute a batch file, the opened cmd instance wont close.
You could also use call instead.
call C:\test.bat
Newbie to windows scripting. I need help running the .bat file on the command line so I can test it.
I used Text Document as my editor to create the file (opens up also as Notepad).
I performed file "save as" (ALL FILES). If I open up cmd, I can see the file has a .txt extension (myfile.bat.txt). So if I just type in cmd myfile.bat.txt the editor opens. I am not sure how to execute this correctly.
As for the logic in my batch script, I am basically logging into a remote directory (already created the net mount) and now I want to:
run an executeable file
rename some files.
With some research, I written this so far. I have saved it as a .bat file
# echo off
echo This is a batch file to run an executable and rename some files
pause
--run executable file here, just don't know how to do it
x:
cd x:
rename fileA fileB
Any help, good tips/practice would be great. Thanks.
Type in this command in cmd window:
rename myfile.bat.txt myfile.bat
Now you can run the script by simply invoking:
myfile.bat
or
myfile
(provided there's no myfile.exe or myfile.com in the same directory).
If you need to edit the script further, you can either right click it in Explorer and choose Edit or call the editor from the command window:
notepad myfile.bat
To call a program from the script, simply add its name, if it's in the current directory:
someprogram.exe
or the name with the path, if it's somewhere else:
directory\program.exe
or
d:\directory\program.exe
If the name or the path contain spaces, be sure to enclose the entire name & path string in double quotes:
"d:\directory\program name.exe"
you can just type the full name of the program
eg
"c:\program dir\program.exe"
or you can add the program directory to your path environment variable
set PATH=%PATH%;"c:\program dir"
and just type the program name
program
you can also edit your PATH variable in windows http://support.microsoft.com/kb/310519
NOTE: When you save the file in notepad, you want to save it as filename.BAT and select All Files from the second dropdown. If you don't it still gets saved as a .TXT.
A couple of command to consider:
CSCRIPT cscript /? in CMD
START http://ss64.com/nt/start.html
If you're doing say a VBSCRIPT use CSCRIPT to start it. If you're trying to execute another BATCH script or an EXE, use START