When running a test which makes use of the of the Jmeter-Plugins listener Response Times vs Threads or Active Threads Over Time remote running of the test plan produces a results file which contains missing results used to plot the actual graph, however when run locally all results are returned. E.g. when using the Response Times vs Threads:
Example of a local result:
1383659591841,59,Example 1,200,OK,Example 1 1-579,text,true,183,22,22,59
Example of a remote result:
1383659859149,43,Example 1,200,OK,Example 1 1-575,text,true,183,43
Note the last two fields are missing
I would check the script definition of the two server: maybe some configuration for the "Write results to file" controller has been changed.
Take the local jmx service and copy it to the remote server.
Also, look for differences in the "# Results file configuration" section of jmeter.properties file.
Make sure that on all of the slave/remote servers the jmeter.properties file within $JMETER_HOME/bin has the following setting
jmeter.save.saveservice.thread_counts=true
By default this is set to false (and commented out)
For more informtation:
JMeter Plugins Installation
Related
I'm doing some tests using JMeter but it seems that when running the test on GUI mode, some HTTPs requests response statistics can be seen via listeners but, when running the same test on non-GUI mode the same responses aren't saved in the jtl file and thus aren't shown in listeners when loading the jtl file on GUI-mode.
After running the test on GUI mode:
Results after running test
And then, running the same test but on non-GUI mode:
Command:
path/to/jmeter -n -t path/to/test.jmx -l path/to/results.jtl -j path/to/logfile.log -JnumUsers=10 -Jjmeterengine.force.system.exit=true -Dnashorn.args=--no-deprecation-warning
Results after loading the jtl file into a listener
You can see that the /buscarAvaliacaoAluno and /alterarAvaliacaoAluno responses aren't there anymore.
edit with error in log
It seems that it says that it can't find the javascript engine used by a postprocessor
After reading this post I understood that if I'm using java 11 or above, using javascript shouldn't work, but when running java -version I get "openjdk version "1.8.0_292" and echo ${JAVA_HOME} I get /usr/java/jdk1.8.0_91
javax.script.ScriptException: Cannot find engine named: 'javascript', ensure you set language field in JSR223 Test Element: Pega id's questionários
at org.apache.jmeter.util.JSR223TestElement.getScriptEngine(JSR223TestElement.java:101) ~[ApacheJMeter_core.jar:5.3]
at org.apache.jmeter.extractor.JSR223PostProcessor.process(JSR223PostProcessor.java:44) [ApacheJMeter_components.jar:5.3]
at org.apache.jmeter.threads.JMeterThread.runPostProcessors(JMeterThread.java:940) [ApacheJMeter_core.jar:5.3]
at org.apache.jmeter.threads.JMeterThread.executeSamplePackage(JMeterThread.java:572) [ApacheJMeter_core.jar:5.3]
at org.apache.jmeter.threads.JMeterThread.processSampler(JMeterThread.java:489) [ApacheJMeter_core.jar:5.3]
at org.apache.jmeter.threads.JMeterThread.run(JMeterThread.java:256) [ApacheJMeter_core.jar:5.3]
at java.lang.Thread.run(Thread.java:745) [?:1.8.0_91]
We cannot provide a comprehensive response without seeing the test plan, the full listener output and the jmeter.log file
If you don't see a sampler result in the .jtl file most probably it hasn't been executed and there could be various reasons for not executing the sampler.
You're looking into old results. Given you provide number of users as 50 I would expect at least 50 sampler results and you have only 10. Try adding -f command-line argument to your JMeter startup script so it would overwrite the existing .jtl file with the new data
You have logic controllers like If Controller for conditionally executing your /buscarAvaliacaoAluno and /alterarAvaliacaoAluno and the condition is not met
You have "Action to be taken after a Sampler error" other than Continue in Thread Group so your test fails somewhere before these samplers and hence they are not being executed
etc.
I am trying to generate html report using robotframework but getting below error
JMeterLibException: 'No samples were found in a log file.'
Command used :
Run Jmeter ${jmeter} ${jmxPath} ${logPath} -JudvData=${excelData} -Jport=${port} -Jurl=${url} -JSMS.group=1
Analyse Jtl Convert To Html ${logPath}
jtl file is getting generated successfully but facing issue will converting jtl to HTML
Below is the log details ,
If there are no results it means that JMeter script execution has failed somewhere somehow, in this case you can check:
Robot Framework log file
JMeter log file
If you cannot figure out what's wrong from the JMeter log file it is possible to increase logging verbosity either for individual components or for the overall application via log4j2.xml file (lives in "bin" folder of your JMeter installation), see How to Configure JMeter Logging article for more details.
The most common reasons are:
The number of threads (virtual users) or loops (iterations) in Thread Group is 0
Missing data file referenced in CSV Data Set Config
Missing JMeter Plugin
While running recorded simulation in Gatling.
I get an error:
"Resource /recordedsimulation/0004.request.dat"/"Resource
/recordedsimulation/0004.request.json" not found?
You have to open your simulation file, for instance: recordedsimulation.scala and replace all error occurrences of first slash in your file path.
For instance use:
.body(RawFileBody("recordedsimulation/0004.request.json"))
instead of:
.body(RawFileBody("/recordedsimulation/0004.request.json"))
And make sure, your directory recordedsimulation is in your resources directory if you are using gatling version greater than 3.
I read from SO (HTTP Error 503.2 - Service Unavailable. The serverRuntime#appConcurrentRequestLimit setting is being exceeded) and MSDN (http://technet.microsoft.com/en-us/library/dd425294(v=office.13).aspx) that I need to set AppConCurrentRequestLimit to a bigger number if the site is showing appconcurrentlimit exceeded error (which mine is like that).
However upon executing the command provided by MSDN, I got error
c:\Windows\System32\inetsrv>appcmd.exe set config /section:serverRuntime /appCon
currentRequestLimit:100000
ERROR ( message:Unknown attribute "appConcurrentRequestLimit". Replace with -?
for help. )
I try to search in google but seems no one having the same issue as mine.
I try to manually input in ASPNET.Config in XML but whatever I change the site does not seem to restart, even I put random error text in the config, my site still does not show error, is ASPNET.Config configuration being used, why there is no error even the configuration is intentionally made error?
It fails if you have additional sections such as ftpsection.
In order to edit the serverRuntime of the system.webserver section you should run:
cd %windir%\system32\inetsrv
appcmd.exe set config /section:system.webserver/serverRuntime /appConcurrentRequestLimit:100000
I took a test with magento-check.php file and it said that:
"Congratulations! Your server meets
the requirements for Magento."
But installation procedure simply hangs on the last step and throws execution_time exceeded error, despite the fact, that I already rised it up to 3000 secs.
Any place where I can look for the problem?
UPDATE:
The error is:
Fatal error: Maximum execution time of
3000 seconds exceeded in
/magento/www/lib/Zend/Validate/Hostname.php
on line 591
Perhaps it is failing when testing for mod_rewrite. There is an option to disable that test in the installation. If installation then succeeds then you'll need to work on getting mod_rewrite to work or else you won't have SEO friendly URLs.
Setup a FQDN under your hosts file and use it during installation. Up the maximum execution time in PHP, and if all else fails after that try installing via the Command Line Interface.
Place a file in your doc root with <?php phpinfo(); ?> in it, call it mycheck.php and load it up. Read for yourself the php options and settings and make sure that the execution time is not over-written by server defaults. (This should be clear from the two column output of phpinfo().