I am trying to install Octave on Mac 10.8.5 using Homebrew.
I ran the following commands in the terminal to install that after installing Xquartz.
brew tap homebrew/science
brew update && brew upgrade
brew install octave
After doing this it successfully installed all the dependencies and finally reached at the last option of installing octave as shown below. But while installing Octave it gave the following error:
==> Installing octave
==> Using Homebrew-provided fortran compiler.
This may be changed by setting the FC environment variable.
==> Downloading http://ftpmirror.gnu.org/octave/octave-3.6.4.tar.bz2
######################################################################## 100.0%
==> Downloading patches
######################################################################## 100.0%
==> Patching
patching file configure.ac
Hunk #1 succeeded at 1605 (offset 2 lines).
==> autoreconf -ivf
==> ./configure --prefix=/usr/local/Cellar/octave/3.6.4 --with-blas=-Wl,-framewo
==> make all
==> make install
./plot.texi:3957: warning: node `Multiple Plot Windows' is prev for `Printing and Saving Plots' in menu but not in sectioning
make[3]: *** [octave.info] Error 1
make[2]: *** [install-recursive] Error 1
make[1]: *** [install-recursive] Error 1
make: *** [install] Error 2
READ THIS: https://github.com/mxcl/homebrew/wiki/troubleshooting
If reporting this issue please do so at (not mxcl/homebrew):
https://github.com/homebrew/homebrew-science/issues
Kindly note that all the dependencies which gets installed when you run brew install octave didn't throw and error and after that only it started installing octave.
Please take a look at this link
https://github.com/Homebrew/homebrew-science/issues/444
use --enable-docs=no option. It will work on mountain lion.
I too had the same issue; fixed by adding the option.
Related
As the title states, when I try install Ruby version 2.7.0 with rvm install ruby-2.7.0, I get the following output:
Ruby Version Failure 2.7.0: Error: Permission denied # apply2files - /usr/local/share/Library/Caches/Yarn/v6/npm-micromatch-3.1.10-70859bc95c9840952f359a068a3fc49f9ecfac23-integrity/node_modules/micromatch/lib/.DS_Stor
The full output is below:
==> Upgrading 3 outdated packages:
libtool 2.4.6_1 -> 2.4.6_2
libyaml 0.2.2 -> 0.2.5
pkg-config 0.29.2_2 -> 0.29.2_3
==> Upgrading libtool 2.4.6_1 -> 2.4.6_2
==> Downloading https://homebrew.bintray.com/bottles/libtool-2.4.6_2.catalina.bottle.tar.gz
==> Downloading from https://d29vzk4ow07wi7.cloudfront.net/af317b35d0a394b7ef55fba4950735b0392d9f31bececebf9c412261c23a01fc?response-content-disposition=attachment%3Bfilename%3D%22libtool-2.4.6_2.catalina.b
######################################################################## 100.0%
==> Pouring libtool-2.4.6_2.catalina.bottle.tar.gz
==> Caveats
In order to prevent conflicts with Apple's own libtool we have prepended a "g"
so, you have instead: glibtool and glibtoolize.
==> Summary
🍺 /usr/local/Cellar/libtool/2.4.6_2: 71 files, 3.7MB
==> `brew cleanup` has not been run in 30 days, running now...
Removing: /usr/local/Cellar/libtool/2.4.6_1... (71 files, 3.7MB)
Error: Permission denied # apply2files - /usr/local/share/Library/Caches/Yarn/v6/npm-micromatch-3.1.10-70859bc95c9840952f359a068a3fc49f9ecfac23-integrity/node_modules/micromatch/lib/.DS_Store
This is unrelated to rvm itself. To install required dependencies for your ruby, rvm used your installed homebrew. However, during cleanup of your installed bottles, homebrew encounters an error, possible because you one installed things with sudo previously.
Try brew doctor and follow its advice to fix your homebrew setup.
I'm trying to install wine on Mac OS X 10.9.5, but I'm getting some kind of error.
Here is output after
brew install wine
==> Installing dependencies for wine: fontconfig, libtiff, gd, libgphoto2, little-cms2, jasper, libicns, makedepend, openssl, sane-backends
==> Installing wine dependency: fontconfig
==> Downloading http://fontconfig.org/release/fontconfig-2.11.1.tar.bz2
Already downloaded: /Library/Caches/Homebrew/fontconfig-2.11.1.tar.bz2
==> Patching
patching file fc-cache/fc-cache.c
patching file fontconfig/fontconfig.h
patching file src/fccache.c
patching file src/fcdir.c
patching file src/fcfs.c
patching file src/fcint.h
patching file src/fcpat.c
==> ./configure --disable-silent-rules --with-add-fonts=/System/Library/Fonts,/Library/Fonts,~/Library/Fonts --prefix=/usr/local/Cellar/fontconfig/2.11.1 --localstatedir=/usr/local/var --sysconfdir=/usr/local/etc
==> make install RUN_FC_CACHE_TEST=false
make[2]: *** [install-data-local] Error 1
make[2]: *** Waiting for unfinished jobs....
/usr/bin/install -c -m 644 fonts.dtd '/usr/local/Cellar/fontconfig/2.11.1/share/xml/fontconfig'
make[1]: *** [install-am] Error 2
make: *** [install-recursive] Error 1
Warning: It appears you have MacPorts or Fink installed.
Software installed with other package managers causes known problems for
Homebrew. If a formula fails to build, uninstall MacPorts/Fink and try again.
READ THIS: https://git.io/brew-troubleshooting
Now I'm not much familiar with brew but if someone can point me on the right track I would appreciate it very much.
Btw, the single reason I'm trying to install wine is so that I can play Civilization3 on OSX.
In the end I installed wine via wineskin.
Trying to install PostgreSQL on my OSX 10.6.8:
$ brew install postgresql
Output (Try 1):
==> Installing dependencies for postgresql: ossp-uuid
==> Installing postgresql dependency: ossp-uuid
==> Downloading ftp://ftp.ossp.org/pkg/lib/uuid/uuid-1.6.2.tar.gz
curl: (7) couldn't connect to host
Trying a mirror...
==> Downloading http://gnome-build-stage-1.googlecode.com/files/uuid-1.6.2.tar.gz
######################################################################## 100.0%
==> ./configure --prefix=/usr/local/Cellar/ossp-uuid/1.6.2 --without-perl --without-php --without-pgsql
==> make
make: *** [uuid_sha1.lo] Error 1
make: *** Waiting for unfinished jobs....
make: *** [uuid_md5.lo] Error 1
make: *** [uuid.lo] Error 1
make: *** [uuid_prng.lo] Error 1
READ THIS: https://github.com/mxcl/homebrew/wiki/troubleshooting
Output (Try 2):
==> Installing dependencies for postgresql: ossp-uuid
==> Installing postgresql dependency: ossp-uuid
==> Downloading ftp://ftp.ossp.org/pkg/lib/uuid/uuid-1.6.2.tar.gz
Already downloaded: /Library/Caches/Homebrew/ossp-uuid-1.6.2.tar.gz
==> ./configure --prefix=/usr/local/Cellar/ossp-uuid/1.6.2 --without-perl --without-php --without-pgsql
==> make
i686-apple-darwin10-gcc-4.2.1: vfork: Operation timed out
gcc-4.2: vfork: Operation timed out
make: *** [uuid_prng.lo] Error 1
make: *** [uuid_md5.lo] Error 1
make: *** [uuid.lo] Error 1
READ THIS: https://github.com/mxcl/homebrew/wiki/troubleshooting
No idea what to do with this. The READ THIS link is useless. Anybody?
UPDATE: Tried brew doctor, which didn't give me anything useful AFAIK, just some warnings about where it was looking for Python:
Warning: "config" scripts exist outside your system or Homebrew directories.
`./configure` scripts often look for *-config scripts to determine if
software packages are installed, and what additional flags to use when
compiling and linking.
Having additional scripts in your path can confuse software installed via
Homebrew if the config script overrides a system or Homebrew provided
script of the same name. We found the following "config" scripts:
/Library/Frameworks/Python.framework/Versions/2.7/bin/python-config
/Library/Frameworks/Python.framework/Versions/2.7/bin/python2.7-config
error message is not related to postgresql. Have you tried brew doctor?
try brew doctor and see this link (OS X 10.8 - error trying to exec '/usr/bin/i686-apple-darwin11-gcc-4.2.1' - installing json gem) I think you should focus on vfork operation timed out message
I'm installing gnupg2 using homebrew on mac osx and getting errors intstalling the dependency libusb.
brew install gpg2
....
==> Installing gnupg2 dependency: libusb
==> Downloading http://downloads.sourceforge.net/project/libusb/libusb-1.0/libusb-1.0.9/libusb-1.0.9.tar.bz2
Already downloaded: /Library/Caches/Homebrew/libusb-1.0.9.tar.bz2
==> ./configure --prefix=/usr/local/Cellar/libusb/1.0.9
==> make install
os/darwin_usb.c:1749: error: old-style parameter declarations in prototyped function definition
os/darwin_usb.c:1749: error: expected '{' at end of input
make[1]: *** [libusb_1_0_la-darwin_usb.lo] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [install-recursive] Error 1
Any ideas how to fix this?
Thanks
Had the same problem, fixed it by installing the XCode command line tools (previously was using gcc standalone package)
I'm trying to do a brew install of fontconfig on OS X 10.8.3 and I'm being thrown with a nasty error. I have XCode 4.6.1 installed.
$ brew install fontconfig
==> Installing fontconfig dependency: pkg-config
==> Downloading https://downloads.sf.net/project/machomebrew/Bottles/pkg-config-0.28.mountain_lion.bottle.tar.gz
######################################################################## 100.0%
==> Pouring pkg-config-0.28.mountain_lion.bottle.tar.gz 🍺 /usr/local/Cellar/pkg-config/0.28: 10 files, 636K
==> Installing fontconfig
==> Downloading http://fontconfig.org/release/fontconfig-2.10.91.tar.gz Already downloaded: /Library/Caches/Homebrew/fontconfig-2.10.91.tar.gz
==> Patching patching file src/fcarch.h
==> ./configure --with-add-fonts=/Library/Fonts,~/Library/Fonts --prefix=/usr/local/Cellar/fontconfig/2.10.91
==> make install
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
make[2]: *** [libfontconfig.la] Error 1
make[1]: *** [install] Error 2
make: *** [install-recursive] Error 1
READ THIS: https://github.com/mxcl/homebrew/wiki/troubleshooting
There seems to be very little information around this issue and it's pretty painful.
*SOLVED*
Turned out I had the DYLD_LIBRARY_PATH env variable set to use with Oracle, and this was causing reference to 32-bit libraries.
Unsetting the DYLD_LIBRARY_PATH env variable fixed this.
Anybody using an Oracle client on their mac should be wary of this!