I created a script that was using
cut -d',' -f- --output-delimiter=$'\n'
to add a newline for each command separated value in RHEL 5, for e.g.
[root]# var="hi,hello how,are you,doing"
[root]# echo $var
hi,hello how,are you,doing
[root]# echo $var|cut -d',' -f- --output-delimiter=$'\n'
hi
hello how
are you
doing
But unfortunately when I run the same command in Solaris 10, it doesn't work at all :( !
bash-3.00# var="hi,hello how,are you,doing"
bash-3.00# echo $var
hi,hello how,are you,doing
bash-3.00# echo $var|cut -d',' -f- --output-delimiter=$'\n'
cut: illegal option -- output-delimiter=
usage: cut -b list [-n] [filename ...]
cut -c list [filename ...]
cut -f list [-d delim] [-s] [filename]
I checked the man page for 'cut' and alas there is no ' --output-delimiter ' in there !
So how do I achieve this in Solaris 10 (bash)? I guess awk would be a solution, but I'm unable to frame up the options properly.
Note: The comma separated variables might have " " space in them.
What about using tr for this?
$ tr ',' '\n' <<< "$var"
hi
hello how
are you
doing
or
$ echo $var | tr ',' '\n'
hi
hello how
are you
doing
With sed:
$ sed 's/,/\n/g' <<< "$var"
hi
hello how
are you
doing
Or with awk:
$ awk '1' RS=, <<< "$var"
hi
hello how
are you
doing
Perhaps do it in bash itself?
var="hi,hello how,are you,doing"
printf "$var" | (IFS=, read -r -a arr; printf "%s\n" "${arr[#]}")
hi
hello how
are you
doing
Related
I have a variable having following format
bundle="chn-pro-X.Y-Z.el8.x86_64"
X,Y,Z are numbers having any number of digits
Ex:
1.0-2 # X=1 Y=0 Z=2
12.45-9874 # X=12 Y=45 Z=9874
How can I grab X.Y and store it in another variable?
EDIT:
I wasn't right with my wording, but
I want to store X.Y into new variable not individual X & Y's
I'm looking to finally have a variable version which has X.Y grabbed from bundle:
version="X.Y"
I would use awk:
bundle="chn-pro-12.45-9874.el8.x86_64"
echo "$bundle" | awk -F "[.-]" '{print $3,$4,$5}'
12 45 9874
Now if you want to assign to x, y, z use read and process substitution:
read -r x y z < <(echo "$bundle" | awk -F "[.-]" '{print $3,$4,$5}')
echo "x=$x, y=$y, z=$z"
x=12, y=45, z=9874
If you just want the value of X.Y as a single value this is still great use for awk:
bundle="chn-pro-12.45-9874.el8.x86_64"
echo "$bundle" | awk -F "[-]" '{print $3}'
12.45
And if you then want to put that into a variable:
x_y=$(echo "$bundle" | awk -F "[-]" '{print $3}')
echo "x_y=$x_y"
x_y=12.45
Or you can use cut in this case to get the third field:
echo "$bundle" | cut -d- -f3
12.45
Like that:
$ bundle="chn-pro-1.0-2.el8.x86_64"
$ X="$(echo "$bundle" | cut -d . -f1 | cut -d- -f3)"
$ Y="$(echo "$bundle" | cut -d . -f2 | cut -d- -f1)"
$ Z="$(echo "$bundle" | cut -d . -f2 | cut -d- -f2)"
$ echo "$X"
1
$ echo "$Y"
0
$ echo "$Z"
2
You can merge X and Y into a single variable:
$ XY="$X.$Y"
$ echo $XY
1.0
Use regex to separate numbers:
numbers=$(echo $bundle | grep -Eo '([0-9]+\.[0-9]+\-[0-9]+)' | sed 's/\./\t/g;s/\-/\t/g')
Then assign them to variables with using awk or tr or cut, whatever you want:
X=$(echo $numbers| awk '{print $1}')
Y=$(echo $numbers| awk '{print $2}')
Z=$(echo $numbers| awk '{print $3}')
EDIT
For storing x.y into single version variable you can simply ignore pervios commands:
version=$(echo $bundle | grep -Eo '([0-9]+\.[0-9]+\-[0-9]+)' | grep -Eo '([0-9]+\.[0-9]+)')
Given this input:
$ bundle="chn-pro-12.45-9874.el8.x86_64"
using GNU or BSD sed for -E:
$ foo=$(echo "$bundle" | sed -E 's/.*-([0-9]+\.[0-9]+)-[0-9].*/\1/')
$ echo "$foo"
12.45
or with any sed:
$ foo=$(echo "$bundle" | sed 's/.*-\([0-9][0-9]*\.[0-9][0-9]*\)-[0-9].*/\1/')
$ echo "$foo"
12.45
Assumptions:
the input string will always contain (at least) 3 hyphens
the desired version string will always reside between the 2nd and 3rd hyphens of the input string
we need to maintain the input string (ie, don't clobber/overwrite the variable containing the input string)
We can eliminate the subprocess calls (necessary for echo/sed/grep/awk/sed) by using some parameter expansions:
$ bundle="chn-pro-X.Y-Z.el8.x86_64"
$ temp="${bundle#*-}" # strip off 1st hyphen delimited string
$ echo "${temp}"
pro-X.Y-Z.el8.x86_64
$ temp="${temp#*-}" # strip off 2nd hyphen delimited string
$ echo "${temp}"
X.Y-Z.el8.x86_64
$ version="${temp%%-*}" # save 3rd hyphen delimited string (aka our version)
$ echo "${version}"
X.Y
NOTE: We can eliminate the temp variable by replacing all occurrences of temp with version with the understanding version does not contain what we want until after the 3rd parameter expansion has occurred, eg:
$ bundle="chn-pro-X.Y-Z.el8.x86_64"
$ version="${bundle#*-}"
$ version="${version#*-}"
$ version="${version%%-*}"
$ echo "${version}"
X.Y
I need to read a json file and take value like 99XXXXXXXXXXXX0 and cccs and write in csv which having column BASE_No and Schedule.
Input file: classedFFDCD_5666_4888_45_2018_02112018012106.021.json
"bfgft":"99XXXXXXXXXXXX0","fp":"XXXXXX","cur_gt":225XXXXXXXX0,"cccs"
"bfgft":"21XXXXXXXXXXXX0","fp":"XXXXXX","cur_gt":225XXXXXXXX0,"nncs"
"bfgft":"56XXXXXXXXXXXX0","fp":"XXXXXX","cur_gt":225XXXXXXXX0,"fgbs"
"bfgft":"44XXXXXXXXXXXX0","fp":"XXXXXX","cur_gt":225XXXXXXXX0,"ddss"
"bfgft":"94XXXXXXXXXXXX0","fp":"XXXXXX","cur_gt":225XXXXXXXX0,"jjjs"
Expected output:
BASE_No,Schedule
99XXXXXXXXXXXX0,cccs
21XXXXXXXXXXXX0,nncs
56XXXXXXXXXXXX0,fgbs
44XXXXXXXXXXXX0,ddss
94XXXXXXXXXXXX0,jjjs
I am using below code for reading file name and date, but unable to read file for BASE_No,Schedule.
SAVEIFS=$IFS
IFS=$(echo -en "\n\b")
for line in `ls -lrt *.json`; do
date=$(echo $line |awk -F ' ' '{print $6" "$7}');
file=$(echo $line |awk -F ' ' '{print $9}');
echo ''$file','$(date "+%Y/%m/%d %H.%M.%S")'' >> $File_Tracker`
Assuming the structure of the json doesnt change for every line, the sample code checks through line by line to retrieve the particular value and concatenates using printf. The output is then stored as new output.txt file.
#!/bin/bash
input="/home/kj4458/winhome/Downloads/sample.json"
printf "Base,Schedule \n" > output.txt
while IFS= read -r var
do
printf "`echo "$var" | cut -d':' -f 2 | cut -d',' -f 1`,`echo "$var" | cut -d':' -f 4 | cut -d',' -f 2` \n" | sed 's/"//g' >> output.txt
done < "$input"
awk -F " \" " ' {print $4","$12 }' file
99XXXXXXXXXXXX0,cccs
21XXXXXXXXXXXX0,nncs
56XXXXXXXXXXXX0,fgbs
44XXXXXXXXXXXX0,ddss
94XXXXXXXXXXXX0,jjjs
I got that result!
I have this shell script variable, var. It keeps 3 entries separated by new line. From this variable var, I want to extract 2, and 0.078688. Just these two numbers.
var="USER_ID=2
# 0.078688
Suhas"
These are the code I tried:
echo "$var" | grep -o -P '(?<=\=).*(?=\n)' # For extracting 2
echo "$var" | awk -v FS="(# |\n)" '{print $2}' # For extracting 0.078688
None of the above working. What is the problem here? How to fix this ?
Just use tr alone for retaining the numerical digits, the dot (.) and the white-space and remove everything else.
tr -cd '0-9. ' <<<"$var"
2 0.078688
From the man page, of tr for usage of -c, -d flags,
tr [OPTION]... SET1 [SET2]
-c, -C, --complement
use the complement of SET1
-d, --delete
delete characters in SET1, do not translate
To store it in variables,
IFS=' ' read -r var1 var2 < <(tr -cd '0-9. ' <<<"$var")
printf "%s\n" "$var1"
2
printf "%s\n" "$var2"
2
0.078688
Or in an array as
IFS=' ' read -ra numArray < <(tr -cd '0-9. ' <<<"$var")
printf "%s\n" "${numArray[#]}"
2
0.078688
Note:- The -cd flags in tr are POSIX compliant and will work on any systems that has tr installed.
echo "$var" |grep -oP 'USER_ID=\K.*'
2
echo "$var" |grep -oP '# \K.*'
0.078688
Your solution is near to perfect, you need to chance \n to $ which represent end of line.
echo "$var" |awk -F'# ' '/#/{print $2}'
0.078688
echo "$var" |awk -F'=' '/USER_ID/{print $2}'
2
You can do it with pure bash using a regex:
#!/bin/bash
var="USER_ID=2
# 0.078688
Suhas"
[[ ${var} =~ =([0-9]+).*#[[:space:]]([0-9\.]+) ]] && result1="${BASH_REMATCH[1]}" && result2="${BASH_REMATCH[2]}"
echo "${result1}"
echo "${result2}"
With awk:
First value:
echo "$var" | grep 'USER_ID' | awk -F "=" '{print $2}'
Second value:
echo "$var" | grep '#' | awk '{print $2}'
Assuming this is the format of data as your sample
# For extracting 2
echo "$var" | sed -e '/.*=/!d' -e 's///'
echo "$var" | awk -F '=' 'NR==1{ print $2}'
# For extracting 0.078688
echo "$var" | sed -e '/.*#[[:blank:]]*/!d' -e 's///'
echo "$var" | awk -F '#' 'NR==2{ print $2}'
I am writing a shell script and I would like to have this code
echo $(awk '{print $1}' /proc/uptime) / 3600 | bc
without the newline character at the end.
I wanted to write it using echo -n, but this code
echo -n $(awk '{print $1}' /proc/uptime) / 3600 | bc
results a syntax error:
(standard_in) 1: syntax error
Can you help me with this?
Thank you very much!
echo $(awk '{print $1}' /proc/uptime) / 3600 | bc | tr -d "\n"
Alternatives:
echo -n $(($(cut -d . -f 1 /proc/uptime)/3600))
mapfile A </proc/uptime; echo -n $((${A%%.*}/3600))
A solution using echo -n:
echo -n $(echo $(awk '{print $1}' /proc/uptime) / 3600 | bc)
In general, if foo produces a line of output, you can print the same output without a newline using echo -n $(foo), even if foo is complicated.
A more straightforward solution using pure awk (since awk does arithmetic and output formatting, there's not much point in using both awk and bc):
awk '{printf("%d", $1 / 3600)}' /proc/uptime
I have a file containing the string
ipAddress=10.78.90.137;10.78.90.149
I'd like to place these two IP addresses in a bash array. To achieve that I tried the following:
n=$(grep -i ipaddress /opt/ipfile | cut -d'=' -f2 | tr ';' ' ')
This results in extracting the values alright but for some reason the size of the array is returned as 1 and I notice that both the values are identified as the first element in the array. That is
echo ${n[0]}
returns
10.78.90.137 10.78.90.149
How do I fix this?
Thanks for the help!
do you really need an array
bash
$ ipAddress="10.78.90.137;10.78.90.149"
$ IFS=";"
$ set -- $ipAddress
$ echo $1
10.78.90.137
$ echo $2
10.78.90.149
$ unset IFS
$ echo $# #this is "array"
if you want to put into array
$ a=( $# )
$ echo ${a[0]}
10.78.90.137
$ echo ${a[1]}
10.78.90.149
#OP, regarding your method: set your IFS to a space
$ IFS=" "
$ n=( $(grep -i ipaddress file | cut -d'=' -f2 | tr ';' ' ' | sed 's/"//g' ) )
$ echo ${n[1]}
10.78.90.149
$ echo ${n[0]}
10.78.90.137
$ unset IFS
Also, there is no need to use so many tools. you can just use awk, or simply the bash shell
#!/bin/bash
declare -a arr
while IFS="=" read -r caption addresses
do
case "$caption" in
ipAddress*)
addresses=${addresses//[\"]/}
arr=( ${arr[#]} ${addresses//;/ } )
esac
done < "file"
echo ${arr[#]}
output
$ more file
foo
bar
ipAddress="10.78.91.138;10.78.90.150;10.77.1.101"
foo1
ipAddress="10.78.90.137;10.78.90.149"
bar1
$./shell.sh
10.78.91.138 10.78.90.150 10.77.1.101 10.78.90.137 10.78.90.149
gawk
$ n=( $(gawk -F"=" '/ipAddress/{gsub(/\"/,"",$2);gsub(/;/," ",$2) ;printf $2" "}' file) )
$ echo ${n[#]}
10.78.91.138 10.78.90.150 10.77.1.101 10.78.90.137 10.78.90.149
This one works:
n=(`grep -i ipaddress filename | cut -d"=" -f2 | tr ';' ' '`)
EDIT: (improved, nestable version as per Dennis)
n=($(grep -i ipaddress filename | cut -d"=" -f2 | tr ';' ' '))
A variation on a theme:
$ line=$(grep -i ipaddress /opt/ipfile)
$ saveIFS="$IFS" # always save it and put it back to be safe
$ IFS="=;"
$ n=($line)
$ IFS="$saveIFS"
$ echo ${n[0]}
ipAddress
$ echo ${n[1]}
10.78.90.137
$ echo ${n[2]}
10.78.90.149
If the file has no other contents, you may not need the grep and you could read in the whole file.
$ saveIFS="$IFS"
$ IFS="=;"
$ n=$(</opt/ipfile)
$ IFS="$saveIFS"
A Perl solution:
n=($(perl -ne 's/ipAddress=(.*);/$1 / && print' filename))
which tests for and removes the unwanted characters in one operation.
You can do this by using IFS in bash.
First read the first line from file.
Seoncd convert that to an array with = as delimeter.
Third convert the value to an array with ; as delimeter.
Thats it !!!
#!/bin/bash
IFS='\n' read -r lstr < "a.txt"
IFS='=' read -r -a lstr_arr <<< $lstr
IFS=';' read -r -a ip_arr <<< ${lstr_arr[1]}
echo ${ip_arr[0]}
echo ${ip_arr[1]}