I am running into an issue where my web code is invoking an ajax call to another endpoint on the same server that is not completing. I can see in the server logs that the request is processed and the response is sent, but the network tool shows the response as not finished (stalled) even after several minutes.
I am looking for more details on what is happening in the proxy (perhaps it is waiting on more data from the server, etc). But I cannot find any logging from the proxy to assist in debugging.
EDIT:
I have noticed this happens on all proxy requests with isXhr set.
OK, so to answer the original question regarding verbose logging, there isn't any. I had to sprinkle logging through the hammerhead code to get anything more meaningful than testcafe timing out on a selector.
Regarding the underlying issue (which would have been obvious long ago with decent proxy logging), I finally uncovered a node.js http module "Parse Error". While the browsers are more forgiving, node's http module will barf on a Content-Length header along with 'Transfer-Encoding : chunked'. Chunked encoding creats additional overhead and the Content-Length does not match the payload size any longer.
This would normally not have happened, but in our server implementation, the API calls are proxied and the far end headers were being passed on to the response leading to a collision in the headers.
Hopefully this will be useful for someone else.
You need to inspect the RequestPipeline module. It controls the procedures of sending the request, processing the response, and sending the modified response to the client.
I am trying to optimise Magento for SEO. I have it included in Google Webmaster Tools, and I have noticed that there are a lot of pages that are labelled withing GWT as server errors, that is, mostly http 500 errors.
So I did some looking into it, and the URLS that google says are HTTP 500 errors, well, I dont think they are supposed to be. Reason I say this is because Magento is calling the 404.phtml template of “Whoops...."… but Google is right, the header sent is http 500.
How do I go about debugging this? Any ideas?
Many thanks for your help!
Ben
Try visiting the offending pages with a browser that can emulate Googlebot headers (e.g. Firefox with User Agent switcher). This will ensure that the site is responding with the same response that Google is seeing. Also, you will need to enable developer mode and enable error reporting, which you may want to do conditionally based on your IP - this can all be done in index.php.
Ensure that you are reviewing the server logs.
I'm developing an iOS app that makes frequent requests to a web server, and I'm using AFNetworking (which I very much like). However, I'm running into a problem with authorization that I just can't solve.
The server requires me to provide an authorization header in order to get the response that I want. Specifically, the authorization headers should be like so:
Authorization = "ApiKey some-user-name:someNumericalApiKey"
I'm using AFNetworking throughout the project, and everything works fine, except for this authorization issue. I'm using the following code:
[myClient setDefaultHeader:#"Authorization" value:#"ApiKey some-user-name:someNumericalApiKey"];
where myClient points to an AFHTTPClient object. Strange enough, when I log the request in XCode using AFHTTPRequestOperationLogger, the logger claims that I have the correct headers set. However, the authorization header does not seem to reach the server - I can't see it in the server log.
To isolate the problem, I've tried to make the exact same request using good old NSURLRequest, as well as curl, and the requests library in Python - all of these work fine, i.e. the authorization header is sent & received (i.e. I can see it in the server log), and the server response is what it should be.
If anyone has run into the same problem (and has found a solution) I would very much appreciate to hear from you.
Thanks.
Sometimes (especially with Django) this is caused by redirection stripping of header parameters. For instance, /Object redirects to /Object/ in the background and removes the necessary auth parameter during the switch.
If you're using AFNetworkActivityLogger with level AFLoggerLevelDebug then you should be able to check this out in the console. If you see a POST request with /Object and the response with /Object/ then this might indicate redirection stripping is taking place.
If you construct your operation manually then the defaultHeaders are not applied, that might be the cause of your problem.
I've just come across a problem relating to IE that there seems to be virtually no documentation about on the 'Net - only a few people asking similar questions.
When I use jQuery (1.4.2) to send a POST request to my server (to which the server responds by sending JSON data), I occasionally get XHR 408 errors (meaning that the server timed out while waiting for the client to finish its request), and (less frequently), XHR 12152 errors (I don't know what these signify). There does not seem to be a pattern to this.
This only occurs in IE (version 8 - I haven't tried other versions, though I can confirm that the problem occurs on two different installations). Safari and Opera seem fine.
This doesn't seem to be a problem with GET requests.
If anyone has any thoughts on the matter, I'd be very grateful.
When you see IE returning things in status that clearly aren't HTTP status codes, they're actually Windows error numbers, typically from WinInet.
12152 ERROR_HTTP_INVALID_SERVER_RESPONSE would seem to confirm the 408's implication that there's a low-level HTTP-syntax problem between your browser and the server. Traditionally this has been a problem with the ActiveX implementation of XMLHttpRequest and keep-alives in HTTPS, but the exact cause is rather murky.
You could perhaps try having the server set Connection: close on XMLHttpRequests that come from IE, see if that helps? This will affect performance, unfortunately.
I solved it by adding "Connection: close" to ajax header also.
There is no need to add "Connection: close" to the response header from the server.
I have tested firing 1,000 requests.
A customer sometimes sends POST requests with Content-Length: 0 when submitting a form (10 to over 40 fields).
We tested it with different browsers and from different locations but couldn't reproduce the error. The customer is using Internet Explorer 7 and a proxy.
We asked them to let their system administrator see into the problem from their side. Running some tests without the proxy, etc..
In the meantime (half a year later and still no answer) I'm curious if somebody else knows of similar problems with a Content-Length: 0 request. Maybe from inside some Windows network with a special proxy for big companies.
Is there a known problem with Internet Explorer 7? With a proxy system? The Windows network itself?
Google only showed something in the context of NTLM (and such) authentication, but we aren't using this in the web application. Maybe it's in the way the proxy operates in the customer's network with Windows logins? (I'm no Windows expert. Just guessing.)
I have no further information about the infrastructure.
UPDATE: In December 2010 it was possible to inform one administrator about this, incl. links from the answers here. Contact was because of another problem which was caused by the proxy, too. No feedback since then. And the error messages are still there. I'm laughing to prevent me from crying.
UPDATE 2: This problem exists since mid 2008. Every few months the customer is annoyed and wants it to be fixed ASAP. We send them all the old e-mails again and ask them to contact their administrators to either fix it or run some further tests. In December 2010 we were able to send some information to 1 administrator. No feedback. Problem isn't fixed and we don't know if they even tried. And in May 2011 the customer writes again and wants this to be fixed. The same person who has all the information since 2008.
Thanks for all the answers. You helped a lot of people, as I can see from some comments here. Too bad the real world is this grotesque for me.
UPDATE 3: May 2012 and I was wondering why we hadn't received another demand to fix this (see UPDATE 2). Looked into the error protocol, which only reports this single error every time it happened (about 15 a day). It stopped end of January 2012. Nobody said anything. They must have done something with their network. Everything is OK now. From summer 2008 to January 2012. Too bad I can't tell you what they have done.
UPDATE 4: September 2015. The website had to collect some data and deliver it to the main website of the customer. There was an API with an account. Whenever there was a problem they contacted us, even if the problem was clearly on the other side. For a few weeks now we can't send them the data. The account isn't available anymore. They had a relaunch and I can't find the pages anymore that used the data of our site. The bug report isn't answered and nobody complaint. I guess they just ended this project.
UPDATE 5: March 2017. The API stopped working in the summer of 2015. The customer seems to continue paying for the site and is still accessing it in February 2017. I'm guessing they use it as an archive. They don't create or update any data anymore so this bug probably won't reemerge after the mysterious fix of January 2012. But this would be someone else's problem. I'm leaving.
Internet Explorer does not send form fields if they are posted from an authenticated site (NTLM) to a non-authenticated site (anonymous).
This is feature for challange-response situations (NTLM- or Kerberos- secured web sites) where IE can expect that the first POST request immediately leads to an HTTP 401 Authentication Required response (which includes a challenge), and only the second POST request (which includes the response to the challange) will actually be accepted. In these situations IE does not upload the possibly large request body with the first request for performance reasons. Thanks to EricLaw for posting that bit of information in the comments.
This behavior occurs every time an HTTP POST is made from a NTLM authenticated (i.e. Intranet) page to a non-authenticated (i.e. Internet) page, or if the non-authenticated page is part of a frameset, where the frameset page is authenticated.
The work-around is either to use a GET request as the form method, or to make sure the non-authenticated page is opened in a fresh tab/window (favorite/link target) without a partly authenticated frameset. As soon as the authentication model for the whole window is consistent, IE will start to send form contents again.
Definitely related: http://www.websina.com/bugzero/kb/browser-ie.html
Possibly related: KB923155
Full Explanation: IEInternals Blog – Challenge-Response Authentication and Zero-Length Posts
This is easy to reproduce with MS-IE and an NTLM authentication filter on server side. I have the same issue with JCIFS (1.2.), struts 1. and MS-IE 6/7 on XP-SP2. It was finally fixed. There are several workarounds to make it up.
change form method from POST (struts default setting) to GET.
For most pages with small sized forms, it works well. Unfortunately i have possibly more than 50 records to send in HTTP stream back to server side. IE has a GET URL limit 2038 Bytes (not parameter length, but the whole URL length). So this is a quick workaround but not applicable for me.
send a GET before POST action executing.
This was recommended in MS-KB. My project has many legacy procedures and i would not take the risk at the right time. I have never tried this because it still needs some extra authentication processing when GET is received by filter layer based on my understanding from MS-KB and I would not like to change the behavior with other browsers, e.g. Firefox, Opera.
detecting if POST was sent with zero content-length (you may get it from header properties hash structure with your framework).
If so, trigger an NTLM authentication cycle by get challenge code from DC or cache and expect an NTLM response.
When the NTLM type2 msg is received and the session is still valid, you don't really need to authenticate the user but just forward it to the expected action if POST content-length is not zero. BTW, this would increase the network traffics. So check your cache life time setting and SMB session soTimeOut configuration before applying the change plz.
Or, more simple, you may just send a 401-unauthorized status to MS-IE and the browser shall send back POST request with data in reply.
MS-KB has provided a hot-fix with KB-923155 (I could not post more than one link because of a low reputation number :{ ) , but it seems not working. Would someone post a workable hot-fix here? Thanks :) Here is a link for reference, http://www.websina.com/bugzero/kb/browser-ie.html
We have a customer on our system with exactly the same problem. We've pin pointed it down to the proxy/firewall. Microsoft's IAS. It's stripping the POST body and sending content-length: 0. Not a lot we can do to work around however, and down want to use GET requests as this exposes usernames/passwords etc on the URL string. There's nearly 7,000 users on our system and only one with the problem... also only one using Microsoft IAS, so it has to be this.
There's a good chance the problem is that the proxy server in between implements HTTP 1.0.
In HTTP 1.0 you must use the Content-Length header field: (See section 10.4 here)
A valid Content-Length is required on
all HTTP/1.0 POST requests. An
HTTP/1.0 server should respond with a
400 (bad request) message if it cannot
determine the length of the request
message's content.
The request going into the proxy is HTTP 1.1 and therefore does not need to use the Content-Length header field. The Content-Length header is usually used but not always. See the following excerpt from the HTTP 1.1 RFC S. 14.13.
Applications SHOULD use this field to
indicate the transfer-length of the
message-body, unless this is
prohibited by the rules in section
4.4.
Any Content-Length greater than or
equal to zero is a valid value.
Section 4.4 describes how to determine
the length of a message-body if a
Content-Length is not given.
So the proxy server does not see the Content-Length header, which it assumes is absolutely needed in HTTP 1.0 if there is a body. So it assumes 0 so that the request will eventually reach the server. Remember the proxy doesn't know the rules of the HTTP 1.1 spec, so it doesn't know how to handle the situation when there is no Content-Length header.
Are you 100% sure your request is specifying the Content-Length header? If it is using another means as defined in section 4.4 because it thinks the server is 1.1 (because it doesn't know about the 1.0 proxy in between) then you will have your described problem.
Perhaps you can use HTTP GET instead to bypass the problem.
This is a known problem for Internet explorer 6, but not for 7 that I know of. You can install this fix for the IE6 KB831167 fix.
You can read more about it here.
Some questions for you:
Do you know which type of proxy?
Do you know if there is an actual body sent in the request?
Does it happen consistently every time? Or only sometimes?
Is there any binary data sent in the request? Maybe the data starts with a \0 and the proxy has a bug with binary data.
If the user is going through an ISA proxy that uses NTLM authentication, then it sounds like this issue, which has a solution provided (a patch to the ISA proxy)
http://support.microsoft.com/kb/942638POST requests that do not have a POST body may be sent to a Web server that is published in ISA Server 2006
I also had a problem where requests from a customer's IE 11 browser had Content-Length: 0 and did not include the expected POST content. When the customer used Firefox, or Chrome the expected content was included in the request.
I worked out the cause was the customer was using a HTTP URL instead of a HTTPS URL (e.g. http://..., not https://...) and our application uses HSTS. It seems there might be a bug in IE 11 that when a request gets upgraded to HTTPS due to HSTS the request content gets lost.
Getting the customer to correct the URL to https://... resulted in the content being included in the POST request and resolved the problem.
I haven't investigated whether it is actually a bug in IE 11 any further at this stage.
Are you sure these requests are coming from a "customer"?
I've had this issue with bots before; they sometimes probe sites for "contact us" forms by sending blank POST requests based on the action URI in FORM tags they discover during crawling.
Presence and possible values of the ContentLength header in HTTP are described in the HTTP ( I assume 1/1) RFC:
http://www.w3.org/Protocols/rfc2616/rfc2616-sec14.html#sec14.13
In HTTP, it SHOULD be sent whenever the message's length can be determined prior to being transferred
See also:
If a message is received with both a
Transfer-Encoding header field and a Content-Length header field,
the latter MUST be ignored.
http://www.w3.org/Protocols/rfc2616/rfc2616-sec4.html#sec4.4
Maybe your message is carrying a Transfer-Encoding header?
Later edit: also please note "SHOULD" as used in the RFC is very important and not equivalent to "MUST":
3. SHOULD This word, or the adjective "RECOMMENDED", mean that there
may exist valid reasons in particular circumstances to ignore a
particular item, but the full implications must be understood and
carefully weighed before choosing a different course.
Ref: http://www.ietf.org/rfc/rfc2119.txt
We had a customer using same website in anonymous and NTLM mode (on different ports). We found out that in our case the 401 was related to Riverbed Steelhead application used for http optimization. The first signal pointing us into that direction was a X-RBT-Optimized-By header. The issue was the Gratuitous 401 feature:
This feature can be used with both per-request and per-connection
authentication but it‘s most effective when used with per-request
authentication. With per-request authentication, every request must be
authenticated against the server before the server would serve the
object to the client. However, most browsers do not cache the server‘s
response requiring authentication and hence it will waste one
round-trip for every GET request. With Gratuitous 401, the client-side
Steelhead appliance will cache the server response and when the client
sends the GET request without any authentication headers, it will
locally respond with a ―401 Unauthorized‖ message and therefore saving
a round trip. Note that the HTTP module does not participate in the
actual authentication itself. What the HTTP module does is to inform
the client that the server requires authentication without requiring
it to waste one round trip.
Google also shows this as an IE (some versions, anyway) bug after an https connection hits the keepalive timeout and reconnects to the server. The solution seems to be configuring the server to not use keepalive for IE under https.
Microsoft's hotfix for KB821814 can set Content-Length to 0:
The hotfix that this article describes implements a code change in Wininet.dll to:
Detect the RESET condition on a POST request.
Save the data that is to be posted.
Retry the POST request with the content length set to 0. This prevents the reset from occurring and permits the authentication process to complete.
Retry the original POST request.
curl sends PUT/POST requests with Content-Length: 0 when configured to use HTTP proxy. It's trick to overcome required buffering in case of first unauthorized PUT/POST request to proxy. In case of GET/HEAD requests curl simply repeats the query. The scheme for PUT/POST is like:
Send first PUT/POST request with Content-Length set to 0.
Get answer. HTTP status code of 407 means we have to use proxy
authorization. Prepare headers for proxy authentication for send request.
Send request again with filled headers for proxy authentication and real data to POST/PUT.