I used to get to the bottom of a webpage by pressing CMD+Keydown. Did they remove this shortcut or is it just me?
I know this used to work not too long ago and it's not working since one of the newer versions... (currently Version 31.0.1650.57)
CMD+Keyup still works just fine.
So I finally got around the problem:
An extension I was using got some automatic update, in this it used CMD+Keydown as a shortcut for the extension, which overwrote the default behavior.
The problem hereby was, that the programmer was not done, so he "seized" the shortcut, but was not using it for anything.
Now after more than 2 months, after an other automatic update, the shortcut triggered something in this extension, so I could find out what was causing the shortcut not to work.
Then I just disabled that shortcut for said extension. All working now :D
Related
When I click on a line to set a break point, the break point line gets highlighted, then the break point highlight disappears.
Other than that, Firefox developer debug has been working fine.
This might help people in the future without having to modify any js file:
Have you clicked the Deactivate breakpoints button? Pressing this will toggle breakpoints on/off.
If the icon is in blue, it means the breakpoints will be de-activated.
Note: I have noticed that in some sessions the toggle is activated although not blue, a refresh of the page solved this.
This just happened to me in Firefox 60.3.0. The tip about removing the Mozilla folder led me to a better solution, which is to edit the prefs.js file in the Mozilla profile folder. (In my system this was in C:\Users\xxx\AppData\Roaming\Mozilla\Firefox\Profiles\xxx.default)
I deleted all of the lines in prefs.js that began with
user_pref("devtools.
e.g.
user_pref("devtools.toolsidebar-height.inspector", 350);
user_pref("devtools.toolsidebar-width.inspector", 350);
This fixed the problem while preserving all my bookmarks, saved passwords, etc. The lines in prefs.js were recreated when I next ran the debugger.
I my case I have mistakenly enabled 'Blackbox source' on a file (in right click menu). When I disabled it then the breakponts works again.
I just encountered the same problem - Firefox Quantum 60 on Ubuntu.
Solution for me was to delete the ~/.mozilla folder for my account. Lost all my bookmarks, history, settings, etc., but can now set breakpoints again.
In my case it was 2 check-boxes to check:
I ran into this problem, or a variant of it as well. For me, it was because webpack was defaulting to setting devtool to "eval". This broke stopping at breakpoints in Firefox for me. Changing that setting to "source-map" resolved the issue, though I suspect most other non-eval options would work fine as well.
I noticed this because I looked in the generated JS file and noticed everything was put into eval() calls.
Also, check the console for errors. I've experienced this issue (can't set a breakpoint) when there is an error elsewhere in the page..
I just stumbled across a similar problem. In my case, it was the eye on the lower left of the debugger window.
The breakpoint vanishes after clicking the eye:
Update:
And another way to blackbox a source:
while having used Java and PHP most of the time in my programming "carreer", I am now trying to learn C++ more in-depth. For that, I am using CLion as my IDE - mostly because I am very familiar with phpStorm and IntelliJ IDEA and I don't want to "learn" a new IDE in addition to learning a new language.
Now, I have hit the problem, that CLion does not take my current Clipboard content when pressing Ctrl + V. The snippet was copied from the Browser (Firefox 41.0.1) and it neither works with code copied by Ctrl + C nor with code copied by rightclicking and then selecting Copy.
It seems like the IDE has problems with getting the Clipboard content from the outside, because when copying and pasting inside the IDE, it works perfectly fine. Only when trying to paste something from another program, it ignores it and pastes something that I copied inside the IDE before.
Do you have any clues on how to fix that? Is it a bug or did I mess up something in my settings or somewhere else?
Clearing "Paste from History" (Ctrl + Shift + V) worked for me.
Same issue with Chrome version 47.0.2526.106.
It seems like that the problem happens when more then one Clion project window is open. After resetting the clion clipboard the problem will not occur during the session again. But after starting a new Clion session the bug is back in place.
Added on 27th december: It also happens when you are only working with one window and stored 5 values in the clion clipboard.
For me works only using middle mouse button for paste.
There sometimes is a notification when you try to use several shortcuts that this is already taken by some VIM Commands and if you want to disable this. Selecting yes didn't change a thing for me.
But using that hint, going to File>Settings>Plugins, disabling IdeaVIM and than restarting did the job.
Fabrizios answered on the duplicate item something, that was partly helpful for me: Ctrl+Shift+V brings up the clipboard history)
This still left me with the actual problem (Ctrl+C, Ctrl+V and more not working).
I need to debug some JavaScript an' I use Chrome dev tools. I'm a newby in JavaScript (just started to learn a couple of days ago), an' at work I could set breakpoints via the Resources pane. But at home for some reason I can't do this: after the click no breakpoint appeares.
I have Chrome version: 26.0.1410.64 m.
What could be the case?
clicking on the De-Obfuscate Source button (i.e. {}) solved this issue for me.
I'm a fool! haha! breakpoints are set in the Source pane )))
It's been a while, but in version 33.0.1750.146, but my problem was that I was on the Sources pane (I'd call this a tab; it's one of the items at the very top of the window), but I was on the Content scripts tab (on the left hand side). I needed to switch to the Sources tab.
To be clear, there are two sets of Sources tabs; one is within the other.
UPDATE 2016-01-07: Now I'm on 47.0.2526.106. The only thing that worked for me today was to close DevTools and re-open. It was a little finicky. It worked once, then stopped, and I had to close the DevTools and re-open again. I saw #johntrepreneur's answer about closing the browser, but unfortunately I have too many tabs open on too many workspaces, so that's too much of a pain, so I didn't try that, although I have to assume that would work.
Other solutions didn't work for me. Had to close and restart browser to be able to set breakpoints again.
This also happens when there is a JS error in your code.
Some sort of weird built in function in windows 10 i think because I did press a few buttons by accident. Some of my keys even stopped working in certain areas of visual studio. F.e the letter "c" stopped working in the find window.
Mine did this and no solution worked, i pressed alt, windows key and function key a few times and my problem went away.
Fixed as follows: For me, the issue stems from having set up Chrome to interact with operating system files. If you set this up, then the fact is evident from a green dot by the file name. At some point, I could not set a breakpoint in a recently edited file. I fixed this by disconnecting the interaction, as follows: When viewing "sources", above the code, there were some file names listed. Clicking the [x] to make the particular filename go away gave a caution message; I proceeded without saving. After that, I was able to set breakpoints for that file.
I also had this problem. However, once I closed the popup message in my browser, suddenly all my breakpoints that I set in that time appeared. Mental note: Don't set breakpoints while your app is showing a popup.
I couldn't find any direct fix for this problem.
It seems that chrome keeps settings of your site stored somewhere whatever you do to clean it. (I tried removing the folder from workspace, closing et reopening chrome etc... and nothing worked).
A workaround is to change your site's url to make chrome consider it a new site
I've recently upgraded from Xcode 4.3 to 4.4 and I'm about to bash my screen in with frustration.
The problem I'm having is with the code completion. As I type a variable or method name, the completion window pops up with the suggestions like it's supposed to. But if I attempt to use the cursor keys to scroll between the suggestions, the suggestions disappear and the cursor moves in the code, not between the suggestions. If I press enter to accept the default suggestion, it again dismisses the suggestions and inserts a return into the code taking the cursor to the next line.
This doesn't happen every time I attempt code completion, but it does occur more often than not. For a given name I'm trying to complete, it either works or it doesn't (e.g. if I press escape to get the suggestions back, it will disappear just as quickly as the first time it disappeared for that line/name I was trying to complete). When I get to the next line of code, it's a whole new bet whether it will work or not. It seems that the closer to the actual completion of the name I am, the more likely it is to actually work and accept the suggestion or move between the suggestions. Sometimes, if I act quickly enough, I can move the highlighted suggestion one or two lines before the suggestions disappear. I'm aware that if you don't select a suggestion quickly enough that it's supposed to eventually remove the suggestions (on the order of several seconds), but this behavior is not what I'm describing. I'd be VERY happy at this point if I had a single second to actually respond and select a suggestion from the pop-up.
So far I've tried a clean of the project, deleting all of the project's derived data, and restarting xcode. All of which don't seem to affect the behavior. Any ideas? I've searched stackoverflow and google and haven't found any other people reporting this problem ...
Thanks for any ideas,
Will
UPDATE:
After upgrading to the XCode 4.6 release version (and 4.5 somewhere in the middle there), this problem is still present ... and making edits in the left/main editor window is still a work-around.
I am seeing the same with Xcode 4.4.1. It seems to be related to where the completion window pops up. Debugger pane open or closed does not change anything here.
When in the Assistant Editor trying in the right pane the completion windows flickers. Same line of code in the left window works fine. Single editor works, too.
Try upgrading to Xcode 4.4.1. I used to have this problem, but I don't seem to have it after upgrading.
If this doesn't solve the problem, a crude workaround seems to be to put a lot of blank lines at the bottom of each file - the problem seems to occur from frequently when the file is scrolled all the way to the bottom.
There is a fix (at least Xcode 4.6.3): re-create the affected file by deleting it. Now create a new file and copy the content to it and drag it into the project - done. Fixes the issue here. It seems to be tied to certain files.
I still have to use the VB6 IDE.
Unfortunately every time I start the IDE one of the buttons of the toolbar disappears. Almost always it's the Run button which goes first. Sometimes also items from the menu bar or the context menus are missing.
I have to reset the toolbars almost every time I start the IDE (Which is quite often during a typical work day). Recently I bought an IDE plugin which modifies the menu bar and requires a restart after every reset of the menu bar. (Otherwise it would crash)
I could live with just the resetting, but the restart is really annoying.
Is there something I can do?
To solve this problem:
Unload all add-ins.
Right-click on a toolbar and select the Customize... menu.
For each toolbar click the Reset... button (6 times in total).
Reload the add-ins.
For me action 3 was enough.
cf. MZTools faq (thanks to Andrea Bonafini), but these steps are originally from MSDN
It sounds like you recently bought a bad add-in. Can you get your money back? Every time I've had problems with disappearing controls in the IDE it has been due to a bad add-in. You can find out which one it is by disabling them, one by one, each time using the IDE for a while, then re-enable it and disable the next one, until the problem stops.
I still use one problematic add-in. It exhibits behavior similar to yours in that it makes the run button disappear. I avoid the problem by only loading the add-in when I need it, use it (it formats code), then I immediately unload it. If you don't use the functionality of the add-in that often, this could be an acceptable workaround.
Yea, i have this same problem with one of the add-in. But if you reset it. Shut the IDE down and open it back up again without doing anything, the IDE shouuld be able to retain the previous clean setup.
It's just guest, but:
Each graphical element on IDE (like button) is kind of resource (i.e. GDI handle).
Maybe your VB app doesn't manage these resources good enough and after sometime VB IDE cannot redraw elements like buttons (run is used often).
Also, maybe some IDE add-in is in conflict with some other add-in/application and breaks something -- I have this problem with Clip-X and MZ-Tools.
I had a similar problem when I was setting up the IDE to use for the first time, though it may not be helpful if you've been using the same IDE for a while. When I first started using the IDE, I would modify the toolbars and then close the IDE. When prompted if I wanted to save the open file I always said No, since the file was just a dummy file I was using to open the IDE with. Turns out the IDE was saving the toolbar preferences with that file, so they never got saved.
Try opening a file, customizing the UI, saving the file, then closing without modifying the code. This was the solution for me.
I've tracked down the problem and as suggested it was an add-in.
The problem went away as soon as I disabled the Visual Basic 6 Resource Editor.
How to restore your VB6 IDE without reinstalling:
Run Regedit
Find the entry for Visual Basic 6.0
Export your settings in case things
go wrong
Delete the 'UI' setting
Run VB and you will have your popup
menus back
The 'Find' button disappeared from my VB6 toolbar forcing me to select the Edit menu to use Find. I had two add-ins enabled: vbCodePrint and ResourceEditor; so I did away with both of them, turned VB6 off and back on, then put both add-ins back in and my button returned.
If you're still using the VB6 IDE, and I do amongst others, then this problem is not likely to have gone away. I use VB6 in Windows 10, and the problem is still there. But it doesn't affect me anymore.
I have had this problem a few years into using VB5 and VB6. Today, if I start VB6 directly, it may work fine the first time, but buttons will go missing the second time -- ALWAYS.
My solution, which I developed from day one:
Do whatever needs to be done to restore all your buttons. Save the Visual Basic 6.0 registry settings to a file, as suggested previously, and only keep the UI entry. Sometimes, you have to exit VB6 for it to post changes to the registry. So if this doesn't work the first time, try exiting before saving the settings.
I use my own program to launch VB6, which automatically copies my VB6 registry backup back into the registry -- by calling "RegEdit.exe /S D:\VB\IDE_Fix.reg" -- before I launch the IDE . This works every single time, and requires no action on my part.
If you read this, that means you are a programmer. You can make this work by yourself.
Mike
Reinstall,clean registry and update with SPacks etc....