In kernel 3.11.0, in the struct perf_event_attr, there are three members named exclude_hv/exclude_host/exclude_guest.
I know the exclude_host field is to exclude events generated by the host when running kvm. But what is the meaning of exclude_hv? Is it used in the Xen?
What is the mechanism in hardware that supports the function of exclude_host? As far as I know, in the performance monitoring select registers, there are no such bits that control the event counter to exclude events generated by the host.
This is a bit old but for those looking at the answer, as me:
exclude_hv: do not count events that occur in the hypervisor.
The distinction between events occurred in user space, kernel, hypervisor, host, etc is done in software. The kernel and/or hypervisor will retire and replace the event count and configuration on each change of context.
Here is an excellent description of perf_events, which is the kernel module that handles the performance counters.
Related
I would like to establish a milestone roadmap for Linux initialization for me to easily understand. (For an embedded system) Here is what I got:
Bootloader loads kernel to RAM and starts it
Linux kernel enters head.o, starts start_kernel()
CPU architecture is found, MMU is started.
setup_arch() is called, setting CPU up.
Kernel subsystems are loaded.
do_initcalls() is called and modules with *_initcall() and module_init() functions are started.
Then /sbin/init (or alike) is run.
I don't know when exactly devicetree is processed here. Is it when do_initcall() functions are beings processed or is it something prior to that?
In general when devicetree is parsed, and when tree nodes are processed?
Thank you very much in advance.
Any correction to my thoughts are highly appreciated.
It's a good question.
Firstly, I think you already know that the kernel will use data in the DT to identify the specific machine, in case of general use across different platform or hardware, we need it to establish in the early boot so that it has the opportunity to run machine-specific fixups.
Here is some information I digest from linux kernel documents.
In the majority of cases, the machine identity is irrelevant, and the kernel will instead select setup code based on the machine’s core CPU or SoC. On ARM for example, setup_arch() in arch/arm/kernel/setup.c will call setup_machine_fdt() in arch/arm/kernel/devtree.c which searches through the machine_desc table and selects the machine_desc which best matches the device tree data. It determines the best match by looking at the ‘compatible’ property in the root device tree node, and comparing it with the dt_compat list in struct machine_desc (which is defined in arch/arm/include/asm/mach/arch.h if you’re curious).
As for the Linux Initialization, I think there are something we can add in the list.
Put on START button, reset signal trigger
CS:IP fix to the BIOS 0XFFFF0 address
Jump to the start of BIOS
Self-check, start of hardware device like keyboard, real mode IDT & GDT
Load Bootloader like grub2 or syslinux.
Bootloader loads kernel to RAM and starts it (boot.img->core.img).
A20 Open, call setup.s, switch into protected mode
Linux kernel enters head.o, IDT & GDT refresh, decompress_kernel(), starts start_kernel()
INIT_TASK(init_task) create
trap_init()
CPU architecture is found, MMU is started (mmu_init()).
setup_arch() is called, setting CPU up.
Kernel subsystems are loaded.
do_initcalls() is called and modules with *_initcall() and module_init() functions are started.
rest_init() will create process 1 & 2, in other word, /sbin/init (or alike) and kthreadd is run.
I have a general question about linux device driver. More often I get confused which actions are allowed or not allowed to perform in a linux device driver?
Is there any rules or kind of lookup list to follow?
for instance with the following examples, which are not allowable?
msleep(1000);
al = kmallock(sizeof(val));
printk(KERN_ALERT "faild to print\n";
ret = adc_get_val()*0.001;
In linux device driver programming it depends in which context you are. There are two contexts that need to be distinguished:
process context
IRQ context.
Sleeping can only be done while in process context or you schedule the work for later execution (there are several mechanism available to do that). This is a complex topic that cannot be described in a paragraph.
Allocating memory can sleep, it depends with which parameters/flags kmalloc is invoked.
print can always be called (once the kernel has been invoked), otherwise use early_printk.
I don't know what the function add_get_val does. It is not part of the linux kernel. And as has already been commented, float values cannot be easily used in the kernel.
I have managed to create a virtual IOPCIDevice which attaches to IOResources and basically does nothing. I'm able to get existing drivers to register and match to it.
However when it comes to IO handling, I have some trouble. IO access by functions (e.g. configRead, ioRead, configWrite, ioWrite) that are described in IOPCIDevice class can be handled by my own code. But drivers that use memory mapping and IODMACommand are the problem.
There seems to be two things that I need to manage: IODeviceMemory(described in the IOPCIDevice) and DMA transfer.
How could I create a IODeviceMemory that ultimately points to memory/RAM, so that when driver tries to communicate to PCI device, it ultimately does nothing or just moves the data to RAM, so my userspace client can handle this data and act as an emulated PCI device?
And then could DMA commands be directed also to my userspace client without interfering to existing drivers' source code that use IODMACommand.
Thanks!
Trapping memory accesses
So in theory, to achieve what you want, you would need to allocate a memory region, set its protection bits to read-only (or possibly neither read nor write if a read in the device you're simulating has side effects), and then trap any writes into your own handler function where you'd then simulate device register writes.
As far as I'm aware, you can do this sort of thing in macOS userspace, using Mach exception handling. You'd need to set things up that page protection fault exceptions from the process you're controlling get sent to a Mach port you control. In that port's message handler, you'd:
check where the access was going to
if it's the device memory, you'd suspend all the threads of the process
switch the thread where the write is coming from to single-step, temporarily allow writes to the memory region
resume the writer thread
trap the single-step message. Your "device memory" now contains the written value.
Perform your "device's" side effects.
Turn off single-step in the writer thread.
Resume all threads.
As I said, I believe this can be done in user space processes. It's not easy, and you can cobble together the Mach calls you need to use from various obscure examples across the web. I got something similar working once, but can't seem to find that code anymore, sorry.
… in the kernel
Now, the other problem is you're trying to do this in the kernel. I'm not aware of any public KPIs that let you do anything like what I've described above. You could start looking for hacks in the following places:
You can quite easily make IOMemoryDescriptors backed by system memory. Don't worry about the IODeviceMemory terminology: these are just IOMemoryDescriptor objects; the IODeviceMemory class is a lie. Trapping accesses is another matter entirely. In principle, you can find out what virtual memory mappings of a particular MD exist using the "reference" flag to the createMappingInTask() function, and then call the redirect() method on the returned IOMemoryMap with a NULL backing memory argument. Unfortunately, this will merely suspend any thread attempting to access the mapping. You don't get a callback when this happens.
You could dig into the guts of the Mach VM memory subsystem, which mostly lives in the osfmk/vm/ directory of the xnu source. Perhaps there's a way to set custom fault handlers for a VM region there. You're probably going to have to get dirty with private kernel APIs though.
Why?
Finally, why are you trying to do this? Take a step back: What is it you're ultimately trying to do with this? It doesn't seem like simulating a PCI device in this way is an end to itself, so is this really the only way to do what greater goal you're ultimately trying to achieve? See: XY problem
I have an embedded board with a kernel module of thousands of lines which freeze on random and complexe use case with random time. What are the solution for me to try to debug it ?
I have already try magic System Request but it does not work. I guess that the explanation is that I am in a loop or a deadlock in a code where hardware interrupt is disable ?
Thanks,
Eva.
Typically, embedded boards have a watch dog. You should enable this timer and use the watchdog user process to kick the watch dog hard ware. Use nice on the watchdog process so that higher priority tasks must relinquish the CPU. This gives clues as to the issue. If the device does not reset with a watch dog active, then it maybe that only the network or serial port has stopped communicating. Ie, the kernel has not locked up. The issue is that there is no user visible activity. The watch dog is also useful if/when this type of issue occurs in the field.
For a kernel lockup case, the lockup watchdogs kernel features maybe useful. This will work if you have an infinite loop/deadlock as speculated. However, if this is custom hardware, it is also possible that SDRAM or a peripheral device latches up and causes abnormal bus activity. This will stop the CPU from fetching proper code; obviously, it is tough for Linux to recover from this.
You can combine the watchdog with some fallow memory that is used as a trace buffer. memmap= and mem= can limit the memory used by the kernel. A driver/device using this memory can be written that saves trace points that survive a reboot. The fallow memory's ring buffer is dumped when a watchdog reset is detected on kernel boot.
It is also useful to register thread notifiers that can do a printk on context switches, if the issue is repeatable or to discover how to make the event repeatable. Once you determine a sequence of events that leads to the lockup, you can use the scope or logic analyzer to do some final diagnosis. Or, it maybe evident which peripheral is the issue at this point.
You may also set panic=-1 and reboot=... on the kernel command line. The kdump facilities are useful, if you only have a code problem.
Related: kernel trap (at web archive). This link may no longer be available, but aren't important to this answer.
If I understand correctly, a memory adderss in system space is accesible only from kernel mode. Does it mean when components mapped in system space are executed the processor must be swicthed to kernel mode?
For ex: the virtual memory manager is a frequently used component and is mapped in system space. Whenever the VMM runs in the context of user process (lets say it translated an address), does the processor must be swicthed to kernel mode?
Thanks,
Suresh.
Typically, there's 2 parts involved.The MMU(Memory manage unit) which is a hardware component that does the translation from virtual addresses to physical addresses. And the operating system VM subsystem.
The operating system part needs to run in privileged mode (a.k.a. kernel mode) and will set up/change the mapping in the MMU based on the the user space needs.
E.g. to request more (virtual) memory, or map a file into memory, a transition to kernel mode is needed and the VM subsystem can change the mapping of the process.
Around this there's often a ton of tricks to be made - e-g. map the whole address space of the kernel into the user process virtual space, but change its access so the process can't use that memory - this means whenever you transit to kernel mode you don't need to reload the mapping for the kernel.
Taking your example of the virtual memory manager, it never actually runs in user space. To allocate memory, user mode applications make calls to the Win32 API (NTDLL.DLL as one example) to routines such as VirtualAlloc.
With regards to address translation, here's a summary of how it works (based on the content from Windows Internals 5th Edition).
The VMM uses page tables which the CPU uses to translate virtual addresses to physical addresses. The page tables live in the system space. Each table contains many PTEs (page table entries) which stores the physical address to which a virtual address is mapped. I won't go into too much detail here, but the point is that all of the VMM's work is performed in system space and not in user space.
As for context switching - when a thread running in user space needs to run in the system space, then a context switch will occur. Since the memory manager lives in system space, it's threads never need to make a context switch, since it already lives in the system space.
Apologies for the simplistic explanation, this is quite a complicated topic of discussion in depth. I would highly recommend that you pick up a copy of Windows Internals as this sounds like it would come in handy for you.