In VS2013 I want to view the same cshtml file in 2 windows side by side (i.e. vertical split). I know how to do a horizontal split but that's not what I'm after here.
The usual approach is to duplicate the tab (WINDOW, New Window) for the file and then create a new vertical tab group.
However, I cannot find a way to duplicate a cshtml tab, since the New Window menu item is disabled for that file type.
It works fine for .cs and even .js files.
I tried to assign a key combo for Window.NewWindow, but it still won't work for cshtml files.
Any suggestions?
To enable "New Window" for cshtml you can change "Single Code Window Only" from 1 to 0 in the registry key HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\12.0_Config\Languages\Language Services\HTMLX.
It was probably disabled for a reason and changing 12.0_Config is prone to overwrites on next VS update, but you can try how it works.
Related
The top of the form container is "up" under the toolbar. I can't find out how to get it down so that I can move the form to different areas on the screen. Using VB6.
Just remove -or rename- the (.vbw) file, that would reset window size & location.. Good luck :)
Edit:
You can also open the file with any text editor and change the form container position (in case you want to maintain the other settings
Click the form then Alt+- (hyphen) to open the MDI child forms default menu, hit M for the Move item and you can use the arrow keys (or mouse iirc) to move it around.
I am unable to perform multi-file text search and replace (in Visual Studio).
In the past, when I opened the "Replace in Files" dialog, there were 4 buttons in the lower right. One of the bottom two buttons allowed me to "Replace All".
The two lower buttons (including "Replace All") are no longer present.
I believe this occurred after I changed some Windows settings so that I could use menus without the Magnifier.
It is not just a matter of the buttons being off-screen because the window is too large (although it is too large - they would be off-screen, if they were present).
I can drag the window and see the bottom, even though the top is then off-screen (I use AltWindowDrag, allowing me to hold the ALT key, and drag by any part of the window, not just the title bar).
The two lower buttons are not present. I'm unable to resize the window - when I try, nothing happens, or the window repositions so that I can see the title bar, but can no longer see the bottom.
The two buttons that are still present (Find Next and Replace) don't have keyboard shortcuts, so I presume that Replace All doesn't either. Nor can I select either of those two buttons using Tab, so probably can't select an "invisible" "Replace All" button that way.
Any help appreciated.
You can use Find and Replace by pressing Ctrl+H and to Replace All just use Alt+A.
I have been developing in zend studio and there is a feature I miss a lot in Xcode. When you are reading code in a main function and you want to go in a specific function to read something, you can click in the left area of your current line of code were your are, and a flag-mark appears in that line of code, so you can go anywere else in the code and it will be very easy to come back to that line of code you were before because there is a flag and you only have to click on it and you automatically go back. Does Anybody know a similar way to do this in Xcode?
Unfortunately, this feature was present in earlier versions of Xcode (up to Xcode3 IIRC) and was called "Bookmarks", but it was removed since then.
You can use breakpoints (and disable them) as a workaround, even if it's not perfect. I personally prefer using other tricks, like "Open Quickly" and named tabs.
Alternate trick 1 : "Open Quickly"
One trick is to use Command+Shift+O (or "File" menu > "Open Quickly") to quickly open a file. In the field that appears, you can type:
The name or parts of the name of a file.
Typing "MainViewController" will propose to jump to the MainViewController.h or MainViewController.m file.
Typing "MainVC" will work too, as well as "MainViewCtrl", as long as the order of the letters you type is the same as the full name.
Very handy to just type "ContTVCell" to open the ContactsTableViewCell.h file that is hidden deep in subgroups of my project for example
Similarly, you may also type the name or parts of the name of a symbol, especially a method name.
For example, typing tvcellforrow will list you all the definitions of -tableView:cellForRowAtIndexPath: it could find in your project and let to jump to the one you want
When typing (parts of) the name of a file, adding : followed by a number at the end will allow you to directly jump at the corresponding line
For example, typing mvc:50 will propose you to jump to line 50 of MainViewController.h or MainViewController.m
Another trick : using (named) tabs
Don't forget that you can open tabs in Xcode, which can be very handy in this kind of situation.
When you are editing a file at some interesting position, you can create a new tab to browse elsewhere and go at any other place… and then go back to your first tab to find the code where you left it at the time you switched to the other tab.
Don't forget that you can name your tabs (simply double-click on their title) to give them a more explicit title. You may then quite think of them as "named bookmarks" somehow
Likewise, don't forget that you can detach tabs in separate windows too, if you prefer (for example to keep them around and visible on your secondary screen while you edit another part of your code)
You can even combine this with the "Open Quickly" trick presented above: once you made the "Open Quickly" field appear and typed something into it, instead of just validating using the enter key:
use Alt+Shift+enter to let Xcode present you a small widget that let you choose where you want the file to open (in the current tab, in another tab, in the assistant editor, in a dedicated window…)
use Alt+enter to open the file using the alternate navigation defined in Xcode preferences (Xcode > Preferences > Navigation > Optional Navigation). By default, the behavior when opening a file while using the Alt key is to open the file in the Assistant Editor. Personally I changed that in my Xcode preferences as I prefer to make Xcode open the file in a separate tab instead, which makes Alt+clic much more useful.
Sure, all those tricks with "Open Quickly…" and "Tabs" do not replace the bookmarks feature that you are missing. But they are still nice alternate ways to jump quickly to any position in your code, even any specific line of any specific file in your project, wherever you are in Xcode (even without having to have the Project Navigator visible on the left part of your window), and let you have multiple editors in different tabs to go quickly back to a part of interest in your code
its on top of your editor i have added two pics just check them.
When you navigate to another place in Xcode, say, open a different file, or Command-click and jump to definition, you can go forward and back by swiping right or left on the trackpad with two fingers.
You can also use keyboard shortcuts: Ctrl+⌘+→ to go forward, or Ctrl+⌘+← to go back.
Finally, you can click triangular buttons at the top left in your edit area.
There is a go back button at the top left of the editor!
If that is not good enough, whar I do is misuse breakpoints to set flags in my code. The breakpoint navigator thus becomes a table of flags. It isn't much but there you are.
After interacting with the Project Navigator, or Search Navigator (The "folder" and "magnifying glass" tabs in the vertical pane on the left), is there a way to send keyboard focus to the code window-pane without clicking in the pane? Clicking has the side-effect of de-selecting selected text and moving the cursor position which in some cases is undesirable. The usual tab-stop mechanism doesn't seem to include the code pane in Xcode.
This is most frustrating when clicking project-wide search-results (which opens the file and selects the matching text for you, but doesn't put keyboard focus there) or clicking on files to temporarily look at a different file. In the latter case I may wish to preserve my cursor position and any already selected text in each file.
I want to be able to edit one method while looking at another method in the same file, as reference.
Can this be done?
You can open the file in another tab (Window -> New Window).
Doing so you have two copies of the same file. Then you can right-click the tab bar and select New Vertical Tab Group (or New Horizontal Tab Group, the one you like more).
Hope I understood you question..
Be on the tab you want to duplicate,then click in the menu bar at the top onWindow > New Window
Finally drag & drop the second window to the the left or right side to show both views next to each other.
Et voila, there you have it :)
EDIT
It seems that this function is not implemented in all version of VS.
In my case (V 15.4.2 (2017), V 15.9.7 (2017) & V 16.2.5 (2019)) it just works fine.
Only vertically that I'm aware. When looking at the code, right above the vertical scroll bar is a small rectangle, drag it down to get a split view of the file.
You simply use the small drag arrows icon at the top right corner of your file window as depicted in the following screenshots:
1) View the same document side-by-side (with a fix for Visual Studio 2017)
It is possible to do this using New Window and New Vertical Tab Group, however, in my Visual Studio 2017 the New Window command was missing from the Window menu. To use it, first you must add the command to a menu or assign a shortcut to it.
To add New Window to your Window menu follow this sequence, starting with the Tools menu:
Tools > Customize > Commands > Menu Bar > Window > Add Command > Window > New Window
FYI In the Commands step you decide where to put the New Window command. The sequence I gave above puts it unceremoniously at the top of the Window menu.
To view the same document side-by-side
Open the document you want to view side-by-side
Select your recently added New Window command (perhaps it's in Window > New Window)
Right click the new tab and select New Vertical Tab Group or select that command from the Window menu
2) View the same document above-one-another
If you wish to view the same document in two views on top of each other use the Window > Split command or click-and-drag the double-arrow at the top of the scroll bar for any window.
3) Get creative
FYI You can even combine the two view options to have three, four or even more views of the same document on a particularly wide monitor. On mine (2560 x 1080) I can comfortably get three side-by-side views going and split them vertically, if desired.
One can install VsVim extension and :sp :vsp does the trick.
In Visual Studio 15 you can just click inside the document and then "Window → Split"