I have written this query on oracle
SELECT itemcode,itemname from hmis.shopitemcode order by dbms_random.value
Its working fine and I got random record but my question is I just want only 5 random record not all the record from database table
when I try to use this query
SELECT itemcode,itemname from hmis.shopitemcode where ROWNUM <= 5 order by dbms_random.value
this query randomize top 5 record not get 5 random record from whole database table
hope this helps!
select * from (
SELECT itemcode,itemname from hmis.shopitemcode order by dbms_random.value
)
where rownum <= 5;
Related
How to get top 10 record group wise in oracle database?
In my query I am getting output from joining multiple table.
select *
from (
select some_column_you_didnt_tell_us,
other_column_you_didnt_tell_us,
row_number() over (partition by group_column_you_didnt_tell_us) as rn
from the_table_you_didnt_tell_us
) t
where rn <= 10;
I need to write one procedure to pick the record for given rows
for example
procedure test1
(
start_ind number,
end_ind number,
p_out ref cursor
)
begin
opecn p_out for
select * from test where rownum between start_ind and end_ind;
end;
when we pass start_ind 1 and end_ind 10 its working.But when we change start_ind to 5
then query looks like
select * from test where rownum between 5 and 10;
and its fails and not shows the output.
Please assist how to fix this issue.Thanks!
The rownum is assigned and then the where condition evaluated. Since you'll never have a rownum 1-4 in your result set, you never get to rownum 5. You need something like this:
SELECT * FROM (
SELECT rownum AS rn, t.*
FROM (
SELECT t.*
FROM test t
ORDER BY t.whatever
)
WHERE ROWNUM <= 10
)
WHERE rn >= 5
You'll also want an order by clause in the inner select, or which rows you get will be undefined.
This article by Tom Kyte pretty much tells you everything you need to know: http://www.oracle.com/technetwork/issue-archive/2006/06-sep/o56asktom-086197.html
SELECT *
from (SELECT rownum AS rn, t.*
FROM MyTable t
WHERE ROWNUM <= 10
ORDER BY t.NOT-Whatever
-- (its highly important to use primary or unique key of MyTable)
WHERE rn > 5
As a hint, :
Typically we use store-procedures for data validation, access control, extensive or complex processing that requires execution of several SQL statements. Stored procedures may return result sets, i.e. the results of a SELECT statement. Such result sets can be processed using cursors, by other stored procedures, by associating a result set locator, or by applications
I think you are going to use the ruw-number to fetch paged queries.
Try to create a generic select query based on the idea mentioned above.
Two possibilities:
1) Your table is an index-organized table. So its data is sorted. You would select those first rows you want to avoid and based on that get the next rows you are looking for:
create or replace procedure get_records
(
vi_start_ind integer,
vi_end_ind integer,
vo_cursor out sys_refcursor
) as
begin
open vo_cursor for
select *
from test
where rownum <= vi_end_ind - vi_start_ind + 1
and rowid not in
(
select rowid
from test
where rownum < vi_start_ind
)
;
end;
2) Your table is not index-organized, which is normally the case. Then its records are not sorted. To get records m to n, you would have to tell the system what order you have in mind:
create or replace procedure get_records
(
vi_start_ind number,
vi_end_ind number,
vo_cursor out sys_refcursor
) as
begin
open vo_cursor for
select *
from test
where rownum <= vi_end_ind - vi_start_ind + 1
and rowid not in
(
select rowid from
(
select rowid
from test
order by somthing
)
where rownum < vi_start_ind
)
order by something
;
end;
All this said, think it over what you want to achieve. If you want to use this procedure to read your table block for block, keep in mind that it will read the same data again and again. To know what rows 1,000,001 to 1,000,100 are, the dbms must read through one million rows first.
Problem: I need write stored procedure(s) that will return result set of a single page of rows and the number of total rows.
Solution A: I create two stored procedures, one that returns a results set of a single page and another that returns a scalar -- total rows. The Explain Plan says the first sproc has a cost of 9 and the second has a cost of 3.
SELECT *
FROM ( SELECT ROW_NUMBER() OVER ( ORDER BY D.ID DESC ) AS RowNum, ...
) AS PageResult
WHERE RowNum >= #from
AND RowNum < #to
ORDER BY RowNum
SELECT COUNT(*)
FROM ...
Solution B: I put everything in a single sproc, by adding the same TotalRows number to every row in the result set. This solution feel hackish, but has a cost of 9 and only one sproc, so I'm inclined to use this solution.
SELECT *
FROM ( SELECT ROW_NUMBER() OVER ( ORDER BY D.ID DESC ) RowNum, COUNT(*) OVER () TotalRows,
WHERE RowNum >= from
AND RowNum < to
ORDER BY RowNum;
Is there a best-practice for pagination in Oracle? Which of the aforementioned solutions is most used in practice? Is any of them considered just plain wrong? Note that my DB is and will stay relatively small (less than 10GB).
I'm using Oracle 11g and the latest ODP.NET with VS2010 SP1 and Entity Framework 4.4. I need the final solution to work within the EF 4.4. I'm sure there are probably better methods out there for pagination in general, but I need them working with EF.
If you're already using analytics (ROW_NUMBER() OVER ...) then adding another analytic function on the same partitioning will add a negligible cost to the query.
On the other hand, there are many other ways to do pagination, one of them using rownum:
SELECT *
FROM (SELECT A.*, rownum rn
FROM (SELECT *
FROM your_table
ORDER BY col) A
WHERE rownum <= :Y)
WHERE rn >= :X
This method will be superior if you have an appropriate index on the ordering column. In this case, it might be more efficient to use two queries (one for the total number of rows, one for the result).
Both methods are appropriate but in general if you want both the number of rows and a pagination set then using analytics is more efficient because you only query the rows once.
In Oracle 12C you can use limit LIMIT and OFFSET for the pagination.
Example -
Suppose you have Table tab from which data needs to be fetched on the basis of DATE datatype column dt in descending order using pagination.
page_size:=5
select * from tab
order by dt desc
OFFSET nvl(page_no-1,1)*page_size ROWS FETCH NEXT page_size ROWS ONLY;
Explanation:
page_no=1
page_size=5
OFFSET 0 ROWS FETCH NEXT 5 ROWS ONLY - Fetch 1st 5 rows only
page_no=2
page_size=5
OFFSET 5 ROWS FETCH NEXT 5 ROWS ONLY - Fetch next 5 rows
and so on.
Refrence Pages -
https://dba-presents.com/index.php/databases/oracle/31-new-pagination-method-in-oracle-12c-offset-fetch
https://oracle-base.com/articles/12c/row-limiting-clause-for-top-n-queries-12cr1#paging
This may help:
SELECT * FROM
( SELECT deptno, ename, sal, ROW_NUMBER() OVER (ORDER BY ename) Row_Num FROM emp)
WHERE Row_Num BETWEEN 5 and 10;
A clean way to organize your SQL code could be trough WITH statement.
The reduced version implements also total number of results and total pages count.
For example
WITH SELECTION AS (
SELECT FIELDA, FIELDB, FIELDC FROM TABLE),
NUMBERED AS (
SELECT
ROW_NUMBER() OVER (ORDER BY FIELDA) RN,
SELECTION.*
FROM SELECTION)
SELECT
(SELECT COUNT(*) FROM NUMBERED) TOTAL_ROWS,
NUMBERED.*
FROM NUMBERED
WHERE
RN BETWEEN ((:page_size*:page_number)-:page_size+1) AND (:page_size*:page_number)
This code gives you a paged resultset with two more fields:
TOTAL_ROWS with the total rows of your full SELECTION
RN the row number of the record
It requires 2 parameter: :page_size and :page_number to slice your SELECTION
Reduced Version
Selection implements already ROW_NUMBER() field
WITH SELECTION AS (
SELECT
ROW_NUMBER() OVER (ORDER BY FIELDA) RN,
FIELDA,
FIELDB,
FIELDC
FROM TABLE)
SELECT
:page_number PAGE_NUMBER,
CEIL((SELECT COUNT(*) FROM SELECTION ) / :page_size) TOTAL_PAGES,
:page_size PAGE_SIZE,
(SELECT COUNT(*) FROM SELECTION ) TOTAL_ROWS,
SELECTION.*
FROM SELECTION
WHERE
RN BETWEEN ((:page_size*:page_number)-:page_size+1) AND (:page_size*:page_number)
Try this:
select * from ( select * from "table" order by "column" desc ) where ROWNUM > 0 and ROWNUM <= 5;
I also faced a similar issue. I tried all the above solutions and none gave me a better performance. I have a table with millions of records and I need to display them on screen in pages of 20. I have done the below to solve the issue.
Add a new column ROW_NUMBER in the table.
Make the column as primary key or add a unique index on it.
Use the population program (in my case, Informatica), to populate the column with rownum.
Fetch Records from the table using between statement. (SELECT * FROM TABLE WHERE ROW_NUMBER BETWEEN LOWER_RANGE AND UPPER_RANGE).
This method is effective if we need to do an unconditional pagination fetch on a huge table.
Sorry, this one works with sorting:
SELECT * FROM (SELECT ROWNUM rnum,a.* FROM (SELECT * FROM "tabla" order by "column" asc) a) WHERE rnum BETWEEN "firstrange" AND "lastrange";
This question already has answers here:
Closed 10 years ago.
Possible Duplicate:
Paging with Oracle
I try to select data starting from 11 row. and i used
select e_name from copy where rownum>10;
this will not display's anything..
please help me to select 11th row to 15th row in my table
You cannot use rownum like that, you need to wrap everything into a derived table:
select *
from (
select *,
rownum as rn
form your_table
order by some_column
)
where rn between 11 and 15
You should use an order by in the inner query because otherwise you will not get consistent results over time. Rows in a relational table do not have any ordering so the database is free to return the rows in any order it feels approriate.
Please read the manual for more details. The reason your query isn't working is documented there with examples.
http://docs.oracle.com/cd/E11882_01/server.112/e26088/pseudocolumns009.htm#i1006297
You have to use like
select e_name
from (select e_name,rownum rno from copy)
where rno > 10 and rno < 16
Sample Example
you could use analytic function row_number() as well. Please consider http://docs.oracle.com/cd/B19306_01/server.102/b14200/functions137.htm
First write the query which will select all the rows like this:-
select ename from employee
Now add a rownum column to your query, rownum will help you to identify the number of row in your query result
select rownum r,ename from employee
Now make your query as a sub query and apply the range on 'r' (rownum)
select * from (selecr rownum r, ename from employee) subq where subq.r between 11 and 15
I want to separete my Oracle table into 5 parts, these parts records will be selected randomly from the original table. Parts can contain the same results, it is not a problem.
How can I do that?
You could use ORDER BY dbms_random.value and then work out the number of total records and divide by 5 and use this to limit the number of row returned:
SELECT * FROM
( SELECT * FROM mytable
ORDER BY dbms_random.value
)
WHERE rownum <= (SELECT count(*)/5 from mytable)