I installed the latest version of libusb and now I'm trying to install usbmuxd.
However, it gives this error:
configure: error: Package requirements (libusb-1.0 >= 1.0.3) were not met:
No package 'libusb-1.0' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
In the installation log of libusb it says
libtool: install: /usr/bin/install -c .libs/libusb-1.0.0.dylib /usr/local/lib/libusb-1.0.0.dylib
It looks like the wrong version of the library is getting installed.
How can I solve this?
You should consider installing macports, which has usbmuxd v1.0.7 available, and then:
$ sudo port selfupdate
$ sudo port install usbmuxd
(you should de-install the libusb package you installed yourself, before doing this probably).
Related
I have visited many forums, tried diffrent methods like brew, pip, port and many more but still am facing the same error.
View this Image for more detail
src/_portaudiomodule.c:29:10: fatal error: 'portaudio.h' file not found
#include "portaudio.h"
^~~~~~~~~~~~~
1 error generated.
error: command '/usr/bin/gcc' failed with exit code 1
Can anyone help?
These steps worked on M1 Pro chips
Install portaudio
brew install portaudio
Link portaudio
brew link portaudio
Copy the path where portaudio was installed (use it in the next step)
brew --prefix portaudio
Create .pydistutils.cfg in your home directory
sudo nano $HOME/.pydistutils.cfg
then paste the following
[build_ext]
include_dirs=<PATH FROM STEP 3>/include/
library_dirs=<PATH FROM STEP 3>/lib/
Install pyaudio
pip install pyaudio
or
pip3 install pyaudio
For me it was:
brew install portaudio
python -m pip install --global-option='build_ext' --global-option='-I/opt/homebrew/Cellar/portaudio/19.7.0/include' --global-option='-L/opt/homebrew/Cellar/portaudio/19.7.0/lib' pyaudio
This Solution is tested on M1 Macs[Please do check with other].
After the installation of HomeBrew on your system, perform the installation of PortAudio. Next follow the steps mentioned below:
Use the command to install PortAudio
sudo brew install portaudio
After successful installation of PortAudio, enter the following command.
sudo nano $HOME/.pydistutils.cfg
Next, enter the following lines in the opened window
[build_ext]
include_dirs=/Users/<enter-your-system-username>/homebrew/Cellar/portaudio/19.20140130/include/
include_dirs=/Users/<enter-your-system-username>/homebrew/Cellar/portaudio/19.20140130/lib/
Note: PortAudio location may be different for you and also don't forget to replace your PC username.
Finally run the command
pip install pyaudio
or
pip3 install pyaudio
The main challenge we're encountering here is that pyaudio doesn't know where to find the portaudio libraries since, according to the source, it only looks in these locations for darwin platform installations:
include_dirs += ['/usr/local/include', '/usr/include']
external_libraries_path += ['/usr/local/lib', '/usr/lib']
This won't do if you're using a homebrew installation of portaudio, particularly so with Apple Silicon since there isn't a pre-built wheel in PyPi. This means setuptools/pip will need to build the package from source.
There are a few ways of configuring setuptools to use additional paths, including passing arguments, using a .pydistutils.cfg file, among others, but the second option worked for me given I'm installing pyaudio to a few Python environments.
Building off of some of the answers above, you can copy the following below to install pyaudio in one go.
# Install portaudio, will print list of paths where it's been installed if already done
brew list portaudio || brew install portaudio
# Link portaudio, will print a warning if already linked
brew link portaudio
# Create a pydistutils config file with the portaudio lib paths set correctly (no copying/pasting paths required)
cat <<EOF >> .pydistutils.cfg
[build_ext]
include_dirs=`brew --prefix portaudio`/include/
library_dirs=`brew --prefix portaudio`/lib/
EOF
# install (build) package with pip
python -m pip install pyaudio
All we're doing is telling setuptools to also look for C/C++ headers where portaudio has been installed by homebrew.
vkshah has an error in his second line. It should ready library_dirs instead of include_dirs:
include_dirs=/Users/<enter-your-system-username>/homebrew/Cellar/portaudio/19.20140130/include/
library_dirs=/Users/<enter-your-system-username>/homebrew/Cellar/portaudio/19.20140130/lib/```
For me, I am running Big Sur on an M1 Mac. I followed all the instructions mentioned in other threads to:
install portaudio
arch -arm64 brew install portaudio
start a venv
python3 -m venv env
source env/bin/activate
install pyaudio
arch -arm64 pip install --no-cache-dir --global-option='build_ext' --global-option='-I/opt/homebrew/include' --global-option='-L/opt/homebrew/lib' pyaudio==0.2.11
TIP #1
If you see error on portaudio.h file not found, the solution is specifying the pyaudio version at the end. Because it kept trying to install version '0.2.12' which failed. I specify the version of pyaudio to '0.2.11' (see above).
TIP #2
After successfully installing pyaudio, you may see error PyAudio C module _portaudio, that is due to pip built it(_portaudio.cpython-36m-darwin.so) in x86_64 architecture. It's not compatible with arm64 portaudio, in this case, make sure to include arch -arm64 in front of pip to build the correct binary.
TIP #3
Use an older version of python, I personally used version 3.6.
Oh, and make sure the single quote is actually ' if you copied the command from a text editor.
Hope this helps!
first you need to download portaudio using homebrew
brew install portaudio
Then try to install pyaudio directly
pip install pyaudio
if you are getting error while installing follow below step
Or
if you are facing any error mentioned bellow you can follow these steps
error 1
option 'include_dirs' in section 'build_ext' already exists
error 2
Could not build wheels for pyaudio, which is required to install pyproject.toml-based projects
error 3
#include "portaudio.h"
^~~~~~~~~~~~~
1 error generated.
error: command '/usr/bin/clang' failed with exit code 1
solution start here
after installing homebrew you have to link it
brew link portaudio
in some cases it will say that it has been already linked then simply ignore
we need path of portaudio where it is exactly installed
brew --prefix portaudio
it will gives you path of portaudio
then you have to check if pydistutils.cfg file exists or not
sudo cat $HOME/.pydistutils.cfg
if file exists then it will open else create it will below command
sudo cat $HOME/.pydistutils.cfg
so in these file we have to define proper path here
[build_ext]
include_dirs=/--PATH--/include/
library_dirs=/--PATH--/lib/
you can get that path by running below command
brew --prefix portaudio
if that path is not working then try below path
[build_ext]
include_dirs=/Users/<username>/homebrew/Cellar/portaudio/19.20140130/include/
library_dirs=/Users/<username>/homebrew/Cellar/portaudio/19.20140130/lib/
If you use mac os
Install Homebrew (insert link into the terminal:
/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/HEAD/install.sh)" )
Insert command into the terminal:
brew install portaudio
Insert command into the terminal:
pip install pyaudio
p.s. sometimes you need upgrade your pip installer
These actions solved my problem (mac os Mojave 10.14.4)
I have installed through brew pygobject3 and it is
/usr/local/Cellar/pygobject3/3.36.1
I have tried to export to the right path but while trying to install PyGTK I am still getting:
configure: error: Package requirements (pygobject-2.0 >= 2.21.3) were not met:
No package 'pygobject-2.0' found
Consider adjusting the PKG_CONFIG_PATH environment variable if you
installed software in a non-standard prefix.
Alternatively, you may set the environment variables PYGOBJECT_CFLAGS
and PYGOBJECT_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
First make sure you have PyGObject fully installed:
$ brew install python3 gobject-introspection gtk+3 adwaita-icon-theme
If you are still getting errors, I have seen issues with the homebrew version of libffi available, which isn't linked automatically:
$ libffi_path="$(brew ls libffi | grep pkgconfig | xargs dirname)"
$ export PKG_CONFIG_PATH="${libffi_path}:${PKG_CONFIG_PATH:-}"
when I'm typing the command
brew install pygobject3 --with-python#2 gtk+3
I'm always getting the error message
invalid option --with-python#2
I'm getting the same error message when I want to run the gtk+3 under mac os 10.15
Namespace Gtk not available
Maybe the Version of 10.15 of MacOS the problem....
gtk+3 version 3.24.12 and pygobject3 Version 3.34.0 are installed.
Installation of homebrew for MacOS
gtk+3 version 3.24.12 and pygobject3 Version 3.34.0 are installed.
Python3.7 is installed
File "...anaconda3/envs/python37/lib/python3.7/site-packages/gi/__init__.py", line 129, in require_version
raise ValueError('Namespace %s not available' % namespace)
ValueError: Namespace Gtk not available
I would like to run the program DemonEditor on MacOS 10.15 (Catalina)
to make some settings of my engima2 satellite receiver, for this I need the requirements "GTK+ >= 3.16 with PyGObject bindings".
Maybe some of the experts can help me.
Thanks very much
Since I am the author of this program, I am forced to report that since the program is designed for Linux, it will not work on MacOS without minor changes to the program itself. But still it’s possible.
DemonEditor
Тo resolve dependencies, it is enough to install as follows:
brew install gtk+3 pygobject3 adwaita-icon-theme
pip3 install requests
Upd.
I created an experimental brunch and added small changes to the program for the possibility of testing the launch in the MacOS. Perhaps not all the functionality will work (I have not tested it), but the program should start.
Gud luck!
STRIKE. It works, I can start the DemonEditor-GUI under 10.15. I have remove all packages via the
brew remove --force $(brew list)
installed the three packages again, via
brew install python3 gtk+3 pygobject3 adwaita-icon-theme
BUT. The most important step was to add the "Installation folder" of the brew packages to my python path but execute the comand
export PYTHONPATH=/usr/local/lib/python3.7/site-packages.
My assumption is, that due to fact, that I have installed an own conda-environment for python37, the site-packages have to be added to the path.
Big thanks for the help.
On my test system, I did not set any paths or environment variables! Just installed python 3 with the command:
brew install python3
Then I installed the dependencies as described above.Then I downloaded the archive from here, and in the unpacked folder of the program I simply gave the command:
./start.py
Below is the output of the commands python3 --version and brew list
Compare with your list, perhaps this will somehow help identify the missing components.
python3 --version
Python 3.7.4
brew list
adwaita-icon-theme libepoxy
atk libffi
cairo libpng
fontconfig librsvg
freetype libtiff
fribidi lzo
gdbm openssl#1.1
gdk-pixbuf pango
gettext pcre
glib pixman
gobject-introspection pkg-config
graphite2 py2cairo
gsettings-desktop-schemas py3cairo
gtk+3 pygobject3
harfbuzz python
hicolor-icon-theme python#2
icu4c readline
jpeg sqlite
libcroco xz
Upd. For the experiment, I removed all my packages with the command:
brew remove --force $(brew list)
Then again installed by commands as described above
brew install python3 gtk+3 pygobject3 adwaita-icon-theme
Working!
I bought a new Mac this week and have had big problems getting this gem installed. It was never a problem on my old Mac but seems to be particularly difficult on this one.
I have installed libvirt via Homebrew, Xcode4.4 (with command line tools) and gcc4.2. I have symlinked to make gcc4.2 the default compiler.
gem install ruby-libvirt -v '0.4.0' fails because it cannot find the headers
If I pass in the paths to the headers and libraries, like so:
ruby-libvirt -v '0.4.0' -V -- --with-libvirt-include=/usr/local/Cellar/libvirt/0.9.11.3/include/ --with-libvirt-lib=/usr/local/Cellar/libvirt/0.9.11.3/lib/
, it compiles just fine but fails when linking with the following errors:
linking shared-object _libvirt.bundle
ld: library not found for -lruby.1.9.1
collect2: ld returned 1 exit status
make: *** [_libvirt.bundle] Error 1
I have installed Ruby 1.9.3 via RVM and haven't had any troubles installing other native extensions, so I cannot see why it fails to find the ruby libraries in this case.
Does anyone have any ideas? Help would be much appreciated.
I built ruby-libvirt-0.4.0/ext/libvirt by proving external libvirt installed using brew.
Here is what I did to successfully install libvirt.
brew install libvirt
ruby extconf.rb --with-libvirt-include=/usr/local/include/libvirt --with-libvirt-lib=/usr/local/lib/libvirt
gem install ruby-libvirt -v '0.4.0' -V -- --with-libvirt-include=/usr/local/Cellar/libvirt/1.1.4/include/libvirt --with-libvirt-lib=/usr/local/Cellar/libvirt/1.1.4/lib
Hope this helps.
To install the gem you need to install the libvirt libraries. Using 'Homebrew' (a package manager for mac) :
brew install libvirt
bundle install
The exact error you got might have been:
An error occurred while installing ruby-libvirt (0.4.0)
I have finally solved this. It turns out that the command line tools were not properly installed. The following line needs to be added to your .zshrc file (or whatever applies to your choice of shell):
export PATH=/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin:/Applications/Xcode.app/Contents/Developer/usr/bin:$PATH
You need only to install libvirt, before the bundle install.
brew install libvirt
My environment is Mac OS X 10.6. I have installed Autoconfig using MacPorts:
sudo port -v selfupdate
sudo port install autoconf
But the autoconf installed is 2.6.1.
My question is how can I upgrade it to 2.6.2?
The program I am trying to compile need autoconf 2.6.2
configure.ac:14: error: Autoconf version 2.62 or higher is required
/opt/local/share/aclocal-1.11/init.m4:110: AM_INIT_AUTOMAKE is expanded from...
configure.ac:14: the top level
autom4te: /Developer/usr/bin/gm4 failed with exit status: 63
aclocal-1.11: autom4te failed with exit status: 63
make[1]: *** [libmpeg2] Error 63
I usually do not bother installing any of the autotools on the system, but install them in $HOME instead. Just grab the autoconf tarball from http://ftp.gnu.org/gnu/autoconf/, unpack it and run:
./configure --prefix=$HOME
make
make install
Make sure $HOME/bin is in your PATH before the system dir, or uninstall autoconf from the system.