I've created a valid Joomla translation file, but when I switch on the language debug, the file is listed as "not loaded"
Contents of language file:
; Joomla! Project
; Copyright (C) 2005 - 2014 Open Source Matters. All rights reserved.
; License GNU General Public License version 2 or later; see LICENSE.txt, see LICENSE.php
; Note : All ini files need to be saved as UTF-8 - No BOM
CATEGORIZED_IN="Categorized In"
Just simple ini file stuff. Dont think there are any errors.
Here's the debug output:
Turns out the name of the language file in the template.xml was different! Thanks #Laoneo for pointing out my stupidity. Must have happened during the Joomla 2.5 -> 3.2 update when the template name was automatically changed.
In my case, the language file had a few <<<<<<< HEAD and ====== due to a botched conflict resolution and subsequent merge, so please make sure the language file doesn't have any such issue otherwise it will just silently be ignored.
Related
I want to be able to scan SSRS report definition (.rdl) files and alter them programmatically. I am following a Microsoft tutorial (albeit a little out-of-date but can't find an up-to-date version).
The tutorial is here: https://learn.microsoft.com/en-us/previous-versions/sql/sql-server-2005/aa337455(v%3dsql.90)
I have downloaded the XML Schema File from the Microsoft website - ReportDefinition.xsd - and am now following the steps 4 to 6 that say to open the Visual Studio Command Prompt and run the utility XSD to generate the ReportDefinition.vb file that contains the classes for the RDL schema.
However, when I run the command as per the instructions:
xsd /c /l:VB /n:SampleRDLSchema ReportDefinition.xsd
... I simply get the error message:
Error: '.', hexadecimal value 0x00, is an invalid character. Line 2, position 1.
This is the first few lines of the file; I can't see the characters 0x00 the error message refers to:
<?xml version="1.0" encoding="utf-8"?>
<!-- Copyright (c) Microsoft. All rights reserved. -->
<xsd:schema targetNamespace="http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.microsoft.com/sqlserver/reporting/2010/01/reportdefinition"
elementFormDefault="qualified">
<xsd:annotation>
<xsd:documentation>
The following schema describes the structure of the
Report Definition Language (RDL) for Microsoft SQL Server 2008 R2.
Given this is a Microsoft written set of instructions to use a Microsoft utility running against a Microsoft supplied file, I'm a bit baffled as to why there should be an error in it.
Can anyone help? Thanks.
The issue being reported at the start of line 2 could indicate that this is an encoding issue. The attribute encoding="utf-8" on the first line indicates that the file should be interpreted as having a a UTF-8 encoding. So after the first line, the xsd utitlity would try to read the file as UTF-8. If the file actually uses a different encoding, then an error would be produced like the one you have encountered.
To test this, remove encoding="utf-8" from the first line & run the command again.
For me, it was another issue. My file contained some includes like :
<xs:include schemaLocation="XMLFILE.xsd"/>
So the error meaning is "it cannot find the XMLFILE.xsd". Make sure you have all related xml files from all includes in all files. You know it when you right clicking on the file in visual studio and do "View Code (F7)". If the include is underlined in red, the file is missing or something in the "XMLFile.xsd" is missing.
Please Microsoft's crew, showing a clear error message can save us a ton of hours of works... Don't you?
I’m having an issue with ftp.SyncLocalDir when I have an open file on the local directory.
I’m using the example from http://www.example-code.com/vbnet/ftp_syncLocalTree.asp with a few minor changes. It has been working fine for a few days and then has stopped working.
I’ve found that one of the files is open on the local directory. Looking through the http://chilkatforum.com/ forum I see that one of the answers stated that
“Chilkat will detect errors that are likely permission/access errors and will continue with the remainder of the download.”
This is not happening for me. Looking at the last error text it states that the file is used by another process. Not other files get synchronized.
Is the something else I need to add to the code to force it to continue after the error?
Below is the last error text.
Thanks,
Steve
ChilkatLog:
SyncLocalDir:
DllDate: Dec 5 2014
ChilkatVersion: 9.5.0.46
UnlockPrefix: *********
Username: *********
Architecture: Little Endian; 32-bit
Language: .NET 4.0
VerboseLogging: 0
commandCharset: ansi
dirListingCharset: ansi
localDirPath: Q:\TEST
mode: 2
ProgressMonitoring:
enabled: yes
heartbeatMs: 0
sendBufferSize: 65536
--ProgressMonitoring
downloadDir:
getFile2:
localFilename: Q:\TEST/LINE_6 _13.csv
Replacing existing local file
openForReadWriteWin32:
Failed to open file (2)
localFilePath: Q:\TEST\LINE_6 _13.csv
currentWorkingDirectory: H:\Code In Progress\LLS\Gen 3 Test And Crimp
w-network\VB Code\trunk\FTP Syncronize\bin\Debug
osErrorInfo: The process cannot access the file because it is being us
ed by another process.
localWindowsFilePath: Q:\TEST\Line 6\LINE_6 _13.csv
--openForReadWriteWin32
--getFile2
Failed to download file
failedFilename: /LINE_6 _13.csv
--downloadDir
Failed.
--SyncLocalDir
--ChilkatLog
Please try this new build for the .NET 4.0 Framework:
32-bit Download: http://www.chilkatsoft.com/download/preRelease/ChilkatDotNet4-9.5.0-win32.zip
64-bit Download: http://www.chilkatsoft.com/download/preRelease/ChilkatDotNet4-9.5.0-x64.zip
The feature for continuing past permission/access issues had to do with issues on the remote server as opposed to the local filesystem. This new build should now also do the same for local permission errors. It will be noted in the release notes for Chilkat version 9.5.0.47 when released (soon).
If you have trouble, please post the LastErrorText using this new build.
command:
radiusd -X
output:
radiusd: FreeRADIUS Version 3.0.1, for host i686-pc-linux-gnu, built on Sep 23 2014 at 00:27:30
Copyright (C) 1999-2014 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/local/etc/raddb/dictionary
including configuration file /usr/local/etc/raddb/radiusd.conf
Configuration file /usr/local/etc/raddb/radiusd.conf is globally writable.Refusing to start due to insecure configuration.
Errors reading or parsing /usr/local/etc/raddb/radiusd.conf
the output states that insecure configuration by observing output.could anyone know,why it is happend, please give me your remedies.
You've changed the permissions of radiusd.conf using something like chmod g+w. chmod g-w /usr/local/etc/raddb/radiusd.conf to fix it.
So I downloaded and installed Microsoft Accelerator v2 to use ParallelArrays. I have referenced it in my project but when I try and execute the code from the module in a script file I get:
"The namespace 'ParallelArrays' is not defined
I have followed the instructions on this post:
Microsoft Accelerator library with Visual Studio F#
I've added a reference to the managed version "Microsoft.Accelerator.dll" to my F# project and then added the native "Accelerator.dll" as an item in my solution and set it's 'Copy To Output Directory' to Copy Always.
Still getting the FSI error and inline error in my script file on the '#load ...' line, however the solution builds fine, and no error in the module file.
Any ideas on what I'm missing? I'm sure it's something stupid.
Thanks,
Justin
UPDATE
I tried mydogisbox's advice, which got rid of the error above, but now when I run the code in the .fsx file I get this error instead:
--> Referenced 'F:\Work\GitHub\qf-sharp\qf-sharp\bin\Debug\Microsoft.Accelerator.dll' (file may be locked by F# Interactive process)
[Loading F:\Work\GitHub\qf-sharp\qf-sharp\MonteCarloGPU.fs]
error FS0192: internal error: F:\Work\GitHub\qf-sharp\qf-sharp\Accelerator.dll: bad cli header, rva 0
UPDATE 2
So the bad header error has dissapeared, but now I get this instead:
Microsoft.ParallelArrays.AcceleratorException: Failure to create a DirectX 9 device.
at Microsoft.ParallelArrays.ParallelArrays.ThrowNativeAcceleratorException()
at Microsoft.ParallelArrays.DX9Target..ctor()
at <StartupCode$FSI_0002>.$FSI_0002_MonteCarloGPU.main#() in F:\Work\GitHub\qf- sharp\qf-sharp\MonteCarloGPU.fs:line 14
Stopped due to error
I found this thread on MSDN however the answers proposed as fixes on that thread barely even relate to the question.
http://social.msdn.microsoft.com/Forums/vstudio/en-US/98600646-0345-4f62-a6c5-f03ac9c77179/ms-accelerator?forum=csharpgeneral
My Direct X version is 11, and I imagine that will suffice, however I tried installing DX9 however, it tells me that a newer version is detected therefore cant install.
There are special directives for referencing dlls from fsi. The #load directive loads the .fs file only. You need to use the #r directive to reference the file. You can either use the full path of the file or you can use #I to include the path to the file. More details here. Keep in mind that fsi is completely independent of your project, so all references in your project must be duplicated in fsi for it to access the same types.
I'm trying to resurrect an old (1999 or earlier) project written in Scheme (PLT-Scheme, using the mzscheme interpreter (?) commandline tool). To make the matters worse, I don't know Scheme, or Lisp (in fact, I want to learn, but that's another story).
I have the source code of the project at:
github.com/akavel/sherman
Now, when running the code, it bails out with an error message like below:
Sherman runtime version 0.5
Hosted on MzScheme version 52, Copyright (c) 1995-98 PLT (Matthew Flatt)
reference to undefined identifier: list->block
(I've tried PLT-Scheme versions 52, 53, 103, 103p1. Earlier versions don't allow mzscheme -L option, which is referenced in the sherman.bat script used in the project. Later versions also have some more serious problems with the code or options.)
The difficulty is, that from what I see, list->block actually is defined - see: collects/sherman/BLOCK.SS line 48. So, what is wrong?
To run the code, I perform the following steps:
Download PLT-Scheme v. 103p1 (from the old versions download page - first closing the "PLT Scheme is now Racket" banner) - for Windows, use: mz-103p1-bin-i386-win32.zip.
Unzip (e.g. to directory c:\PLT).
Copy c:\sherman\collects\sherman directory with contents to: c:\PLT\collects\sherman (where c:\sherman contains the contents of the github repository).
Run cmd.exe, then cd c:\sherman.
set PATH=c:\PLT;%PATH%
sherman.bat run trivial.s
this command is in fact, from what I understand, equivalent to:
(require-library "runtime.ss" "sherman")
(parameterize ((current-namespace sherman-namespace)) (load "trivial.s"))
(current-namespace sherman-namespace)
After that, I get the error as described above (MzScheme version would be reported as 103p1 or whatever).
Could you help me solve the problem?
EDIT 2: SOLVED!
To whom it may concern, I've added a fully fledged "How to use this project" instruction on the project page, detailing the solution to the problem thanks to soegaard's help.
In short:
copy trivial.s trivial.rs
rem (the above is workaround for problems with 'r2s.exe < trivial.r > trivial.rs')
sherman.bat compile trivial.rs
sherman.bat run trivial.zo
rem (or: sherman.bat run trivial.ss)
Not an answer, but a few notes too big for a comment.
1. Sanity Check
The error message says list->block is undefined.
Make sure that the code in block.ss is run, by
inserting (display "block.ss is loaded!") in block.ss
just to make sure, the code is run.
2. Random Thoughts
The file blocks.ss begins with:
(require-library "functios.ss")
(require-library "synrule.ss")
(require-library "stream.ss" "sherman")
The file "sherman/stream.ss" is in the repository,
but where is "synrule.ss" and "functios.ss" ?
Ah... This code is old! Here is a description of
how require-library worked. It lists functios.ss
and synrule.ss as part of MzLib.
http://www.informatik.uni-kiel.de/~scheme/doc/mzscheme/node158.htm
Let's check out how require-library worked:
When require-library is used to load a file, the library name and the
resulting value(s) are recored in a table associated with the current
namespace. If require-library is evaluated for a library that is
already registered in the current namespace's load table, then the
library is not loaded again; the result(s) recorded in the load table
is returned, instead.
So when the code in block.ss is run, the names are stored in a namespace. If the current namespace is the wrong one, when the code in block.ss is evaluated, it would explain you error message of list->block being undefined.