So, I have some code for a Rect variable mageSection:
And I'd like to copy the same code for a different variable warriorSection. To achieve this:
So I'd like to know if there is a visual studio shortcut for allow you to change variable name in multiple line in visual studio without refactoring the whole variable name.i.e. I don't have to manually change those names from mageSection to warriorSectionfor these 4 lines.
It is a question about shortcut in visual studio rather than writing functions, as I'd like to know the shortcut for this. Many thanks!
Copy and paste the section of code.
Now select the pasted code and hit Ctrl-H to bring up the Quick Replace dialog.
In the top box, type "mageSection".
In the bottom box, type "warriorSection".
Hit Enter and it will find the first occurrence and replace it.
Hit Enter three more times...done.
If I'm understanding your question correctly you should be able to hold down alt while clicking into multiple lines and change them all at once. Then hit ESC to exit multiline editing.
I have been developing in zend studio and there is a feature I miss a lot in Xcode. When you are reading code in a main function and you want to go in a specific function to read something, you can click in the left area of your current line of code were your are, and a flag-mark appears in that line of code, so you can go anywere else in the code and it will be very easy to come back to that line of code you were before because there is a flag and you only have to click on it and you automatically go back. Does Anybody know a similar way to do this in Xcode?
Unfortunately, this feature was present in earlier versions of Xcode (up to Xcode3 IIRC) and was called "Bookmarks", but it was removed since then.
You can use breakpoints (and disable them) as a workaround, even if it's not perfect. I personally prefer using other tricks, like "Open Quickly" and named tabs.
Alternate trick 1 : "Open Quickly"
One trick is to use Command+Shift+O (or "File" menu > "Open Quickly") to quickly open a file. In the field that appears, you can type:
The name or parts of the name of a file.
Typing "MainViewController" will propose to jump to the MainViewController.h or MainViewController.m file.
Typing "MainVC" will work too, as well as "MainViewCtrl", as long as the order of the letters you type is the same as the full name.
Very handy to just type "ContTVCell" to open the ContactsTableViewCell.h file that is hidden deep in subgroups of my project for example
Similarly, you may also type the name or parts of the name of a symbol, especially a method name.
For example, typing tvcellforrow will list you all the definitions of -tableView:cellForRowAtIndexPath: it could find in your project and let to jump to the one you want
When typing (parts of) the name of a file, adding : followed by a number at the end will allow you to directly jump at the corresponding line
For example, typing mvc:50 will propose you to jump to line 50 of MainViewController.h or MainViewController.m
Another trick : using (named) tabs
Don't forget that you can open tabs in Xcode, which can be very handy in this kind of situation.
When you are editing a file at some interesting position, you can create a new tab to browse elsewhere and go at any other place… and then go back to your first tab to find the code where you left it at the time you switched to the other tab.
Don't forget that you can name your tabs (simply double-click on their title) to give them a more explicit title. You may then quite think of them as "named bookmarks" somehow
Likewise, don't forget that you can detach tabs in separate windows too, if you prefer (for example to keep them around and visible on your secondary screen while you edit another part of your code)
You can even combine this with the "Open Quickly" trick presented above: once you made the "Open Quickly" field appear and typed something into it, instead of just validating using the enter key:
use Alt+Shift+enter to let Xcode present you a small widget that let you choose where you want the file to open (in the current tab, in another tab, in the assistant editor, in a dedicated window…)
use Alt+enter to open the file using the alternate navigation defined in Xcode preferences (Xcode > Preferences > Navigation > Optional Navigation). By default, the behavior when opening a file while using the Alt key is to open the file in the Assistant Editor. Personally I changed that in my Xcode preferences as I prefer to make Xcode open the file in a separate tab instead, which makes Alt+clic much more useful.
Sure, all those tricks with "Open Quickly…" and "Tabs" do not replace the bookmarks feature that you are missing. But they are still nice alternate ways to jump quickly to any position in your code, even any specific line of any specific file in your project, wherever you are in Xcode (even without having to have the Project Navigator visible on the left part of your window), and let you have multiple editors in different tabs to go quickly back to a part of interest in your code
its on top of your editor i have added two pics just check them.
When you navigate to another place in Xcode, say, open a different file, or Command-click and jump to definition, you can go forward and back by swiping right or left on the trackpad with two fingers.
You can also use keyboard shortcuts: Ctrl+⌘+→ to go forward, or Ctrl+⌘+← to go back.
Finally, you can click triangular buttons at the top left in your edit area.
There is a go back button at the top left of the editor!
If that is not good enough, whar I do is misuse breakpoints to set flags in my code. The breakpoint navigator thus becomes a table of flags. It isn't much but there you are.
I'm in VS2010, on a breakpoint. How can I cause a datatip to be displayed for a given variable/expression w/o using my mouse to hover it?
That can't be done, exactly, but you can get the same result by selecting the variable you want to watch (using ReSharper's Ctrl + Alt + →/← can speed this up), and pressing Shift + F9, which will raise "QuickWatch" modal window with the datatip contained within.
If you prefer, you can also go into Options->Keyboard and bind the Debug.AddWatch to a different keyboard shortcut, and use that instead of Shift + F9, and then your variable data will persist in the Watch window so you can come back to it later (as suggested here)
You can also do this by opening the command window (Ctrl + Alt + A) and typing Debug.AddWatch variable_name.
While you can pin multiple windows in VS it will be a somewhat cumbersome experience and you will have to over it.
I personally use visual studio plugin called Oz Code, that automatically annotates all the local variables and intermediate results so I don't have to chose which variables to pinpoint.
The results looks something like this:
Will adding a watch not be suitable? When you hit your breakpoint the relevant details of the variable will be shown in the watch window.
Perhaps I have misunderstood what you're trying to achieve here!
You can click the 'pin' icon to force any datatip to stay open, and it will update to the current contents when you hit the breakpoint.
I don't know of a way to open a specified tip without pinning it, however.
The Locals and Autos windows might be helpful as they show all local variables, (they even show the return value of called functions!).
Note however that they show directly only variables in scope, so if you need a detail property that it is not yet menotioned in the code you can drilldown using the →/← keys, however if it is already mentioned in the code in the current scope then you should be able to see it directly in the Autos window.
Locked. This question and its answers are locked because the question is off-topic but has historical significance. It is not currently accepting new answers or interactions.
Visual Studio is such a massively big product that even after years of working with it I sometimes stumble upon a new/better way to do things or things I didn't even know were possible.
For instance-
Crtl + R, Ctrl + W to show white spaces. Essential for editing Python build scripts.
Under "HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\8.0\Text Editor"
Create a String called Guides with the value "RGB(255,0,0), 80" to have a red line at column 80 in the text editor.
What other hidden features have you stumbled upon?
Make a selection with ALT pressed - selects a square of text instead of whole lines.
Tracepoints!
Put a breakpoint on a line of code. Bring up the Breakpoints Window and right click on the new breakpoint. Select 'When Hit...'. By ticking the 'Print a message' check box Visual Studio will print out a message to the Debug Output every time the line of code is executed, rather than (or as well as) breaking on it. You can also get it to execute a macro as it passes the line.
You can drag code to the ToolBox. Try it!
Click an identifier (class name, variable, etc) then hit F12 for "Go To Definition". I'm always amazed how many people I watch code use the slower right-click -> "Go To Definition" method.
EDIT: Then you can use Ctrl+- to jump back to where you were.
CTRL+SHIFT+V will cycle through your clipboard, Visual Studio keeps a history of copies.
Sara Ford covers lots of lovely tips: http://blogs.msdn.com/saraford/archive/tags/Visual+Studio+2008+Tip+of+the+Day/default.aspx
But some of my favourites are Code Snippets, Ctrl + . to add a using <Namespace> or generate a method stub.
I can't live without that.
Check out a great list in the Visual Studio 2008 C# Keybinding poster: http://www.microsoft.com/downloadS/details.aspx?familyid=E5F902A8-5BB5-4CC6-907E-472809749973&displaylang=en
CTRL-K, CTRL-D
Reformat Document!
This is under the VB keybindings, not sure about C#
How many times do you debug an array in a quickwatch or a watch window and only have visual studio show you the first element? Add ",N" to the end of the definition to make studio show you the next N items as well. IE "this->m_myArray" becomes "this->m_array,5".
Incremental search: While having a source document open hit (CTRL + I) and type the word you are searching for you can hit (CTRL + I) again to see words matching your input.
You can use the following codes in the watch window.
#err - display last error
#err,hr - display last error as an HRESULT
#exception - display current exception
Ctrl-K, Ctrl-C to comment a block of text with // at the start
Ctrl-K, Ctrl-U to uncomment a block of text with // at the start
Can't live without it! :)
Stopping the debugger from stepping into trivial functions.
When you’re stepping through code in the debugger, you can spend a lot of time stepping in and out of functions you’re not particularly interested in, with names such as GetID(), or std::vector<>(), to pick a C++ example. You can use the registry to make the debugger ignore these.
For Visual Studio 2005, you have to go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\VisualStudio \8.0\NativeDE\StepOver and add string values containing regular expressions for each function or set of functions you wish to exclude; e.g.
std::vector.*::.*
TextBox::GetID
You can also override these for individual exceptions. For instance, suppose you did want to step into the vector class’s destructor:
std::vector.*::\~.*=StepInto
You can find details for other versions of Visual Studio at http://blogs.msdn.com/andypennell/archive/2004/02/06/69004.aspx
Ctrl-F10: run to cursor during debugging. Took me ages to find this, and I use it all the time;
Ctrl-E, Ctrl-D: apply standard formatting (which you can define).
TAB key feature.
If you know snippet key name, write and click double Tab. for example:
Write
foreach
and then click tab key twice to
foreach (object var in collection_to_loop)
{
}
2. If you write any event, write here
Button btn = new Button();
btn.Click +=
and then click tab key twice to
private void Form1_Load(object sender, EventArgs e)
{
Button btn = new Button();
btn.Click += new EventHandler(btn_Click);
}
void btn_Click(object sender, EventArgs e)
{
throw new Exception("The method or operation is not implemented.");
}
btn_Click function write automatically
in XAML Editor, Write any event. for example:
MouseLeftButtonDown then click tab
MouseLeftButtonDown="" then click tab again
MouseLeftButtonDown="Button_MouseLeftButtonDown" in the code section Button_MouseLeftButtonDown method created.
Sara Ford has this market cornered.
http://blogs.msdn.com/saraford/default.aspx
More Visual Studio tips and tricks than you can shake a stick at.
Some others:
The Visual Studio 2005 and 2008 3-month trial editions are fully-functional, and can be used indefinitely (forever) by setting the system clock back prior to opening VS. Then, when VS is opened, set the system clock forward again so your datetimes aren't screwed up.
But that's really piracy and I can't recommend it, especially when anybody with a .edu address can get a fully-functional Pro version of VS2008 through Microsoft Dreamspark.
You can use Visual Studio to open 3rd-party executables, and browse embedded resources (dialogs, string tables, images, etc) stored within.
Debugging visualizers are not exactly a "hidden" feature but they are somewhat neglected, and super-useful, since in addition to using the provided visualizers you can roll your own for specific data sets.
Debugger's "Set Instruction Pointer" or "Set Next Statement" command.
Conditional breakpoints (as KiwiBastard noted).
You can use Quickwatch etc. to evaluate not only the value of a variable, but runtime expressions around that variable.
T4 (Text Template Transformation Toolkit). T4 is a code generator built right into Visual Studio
Custom IntelliSense dropdown height, for example displaying 50 items instead of the default which is IMO ridiculously small (8).
(To do that, just resize the dropdown next time you see it, and Visual Studio will remember the size you selected next time it opens a dropdown.)
Discovered today:
Ctrl + .
Brings up the context menu for refactoring (then one that's accessible via the underlined last letter of a class/method/property you've just renamed - mouse over for menu or "Ctrl" + ".")
A lot of people don't know or use the debugger to it's fullest - I.E. just use it to stop code, but right click on the red circle and there are a lot more options such as break on condition, run code on break.
Also you can change variable values at runtime using the debugger which is a great feature - saves rerunning code to fix a silly logic error etc.
Line transpose, Shift-Alt-T
Swaps two line (current and next) and moves cursor to the next line. I'm lovin it. I've even written a macro which changed again position by one line, executed line transpose and changed line position again so it all looking like I swapping current line with previous (Reverse line transpose).
Word transpose, Shift-Ctrl-T
When developing C++, Ctrl-F7 compiles the current file only.
Document Outline in the FormsDesigner (CTRL + ALT + T)
Fast control renaming, ordering and more!
To auto-sync current file with Solution Explorer. So don't have to look where the file lives in the project structure
Tools -> Options -> Projects and Solutions -> "Track Active Item in Solution Explorer"
Edit: If this gets too annoying for you then you can use Dan Vanderboom's macro to invoke this feature on demand through a keystroke.
(Note: Taken from the comment below by Jerry).
I'm not sure if it's "hidden", but not many people know about it -- pseudoregisters. Comes very handy when debugging, I've #ERR, hr in my watch window all the time.
Ctrl-Minus, Ctrl-Plus, navigates back and forward where you've been recently (only open files, though).
I don't use it often, but I do love:
ctrl-alt + mouse select
To select in a rectangular block, to 'block' boundaries.
As noted in comments,
alt + mouse select
Does just a plain rectangular block.
Here's something I learned (for C#):
You can move the cursor to the opening curly brace from the closing curly brace by pressing Control + ].
I learned this on an SO topic that's a dupe of this one:
“Hidden Secrets” of the Visual Studio .NET debugger?
CTRL + Shift + U -> Uppercase highlighted section.
CTRL + U -> Lowercase the highlighted section
Great for getting my SQL Statements looking just right when putting them into string queries.
Also useful for code you've found online where EVERYTHING IS IN CAPS.
Middle Mouse Button Click on the editor tab closes the tab.
To display any chunk of data as an n-byte "array", use the following syntax in Visual Studio's QuickWatch window:
variable, n
For example, to view a variable named foo as a 256-byte array, enter the following expression in the QuickWatch window:
foo, 256
This is particularly useful when viewing strings that aren't null-terminated or data that's only accessible via a pointer. You can use Visual Studio's Memory window to achieve a similar result, but using the QuickWatch window is often more convenient for a quick check.