In a nutshell, after deleting then recreating new global ssh keys on a managed host as part of an ansible play, the shared ssh keys between the controller and the host break. I would like to know a superior method to "fix" this issue and regain the original ssh key trust using ansible itself. Unfortunately this will require some explanation.
Basically as a start, right now, I don't have ansible set up when a new image is deployed. To remedy that, I have created a bash script, utilizing expect which nicely and neatly does 2 things on that new managed host:
Creates an ansible account with appropriate sudo permissions
Creates an ssh key pair between the controller and the controller and the managed host.
That's it, and that's all, however it does require manual input at this time as to the IP of the host to be run on. We now have a desired state from which ansible works well via ssh. However it seems cumbersome at 328 lines of code to check and do this procedure, more on this later.
The issue starts, due to the fact that the host/server is deployed from an image, there is a need to recreate the global keys on each so that they do not have the same set. The fix for this part of that issue is a simple 2 steps:
Find and delete all ^ssh_host_. files in the directory /etc/ssh/
Run the command: /usr/bin/ssh-keygen -A to generate new global ssh keys.
We however now have a problem, once the current ssh connection is broken to the managed host, we can no longer connect to our managed hosts as our known_hosts file on the controller now have keys that don't match. If you do nothing else, you get a prompt again to verify the remote key as it has "changed" and you can't continue until you do. (Stopping all playbooks from functioning) OR if you try to clear the IP out of the known_hosts file on the controller and put it back in, you get the lovely below message:
"changed": false,
"msg": "Failed to connect to the host via ssh: ###########################################################\r\n# WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! ***SNIP*** You can use following command to remove the offending key:\r\nssh-keygen -R 10.200.5.4 -f /home/ansible/.ssh/known_hosts\r\nECDSA host key for 10.200.5.4 has changed and you have requested strict checking.\r\nHost key verification failed.",
"unreachable": true
So now I have an issue, and there must be a few commands which I can utilize with ssh-keygen, and/or ssh-keyscan to fix this mess cleanly. However for the life of me I can't figure it out. My only recourse now is to re-run the bash script which initially sets this all up, and replace everything on the controller/host sshkey wise. This seems like overkill, I can't possibly believe that is necessary.
My only hope now is that someone else has an idea how to solve this cleanly and permanently without manual intervention. Otherwise, the only thing I can do is set the ansible_ssh_common_args: "-o StrictHostKeyChecking=no"fact and run the commands my script does but only in playbook form. I can't believe there aren't any modules which can accomplish this. I tried the known_host module, but either I don't know how to use it properly, or it doesn't have this functionality. (Also it has the annoying property of changing my known_hosts file to root ownership, which I must then change back.)
If anyone can help that would be fantastic! Thanks in advance!
The below is not strictly needed as it's extra text clogging up the works, but it does illustrate how the bash script fixes this issue and maybe give some insight on a better solution:
In short, it generates an ssh public and private key, attaches the hostname to them, creates an ssh config identity file using a heredocs population method, puts them in the proper spots, and then copies the public key over to mangaged host in question.
The code snipits are below to show how this is accomplished. This is not the entire script just relevant parts:
#HOMEDIR is /home/ansible This host is the IP of managed host in the run.
#THISHOST is the IP of the managed host in question. Yes, we ONLY use IP's, there is no DNS.
cd "$HOMEDIR"
rm -f $HOMEDIR/.ssh/id_rsa
ssh-keygen -t rsa -f "$HOMEDIR"/.ssh/id_rsa -q -P ""
sudo mkdir -p "$HOMEDIR"/.ssh/rsa_inventory && sudo chown ansible:users "$HOMEDIR"/.ssh/rsa_inventory
cp -p "$HOMEDIR"/.ssh/id_rsa "$HOMEDIR"/.ssh/rsa_inventory/$THISHOST-id_rsa
cp -p "$HOMEDIR"/.ssh/id_rsa.pub "$HOMEDIR"/.ssh/rsa_inventory/$THISHOST-id_rsa.pub
#Heredocs implementation of the ssh config identity file:
cat <<EOT >> /home/ansible/.ssh/config
Host $THISHOST $THISHOST
HostName $THISHOST
IdentityFile ~/.ssh/rsa_inventory/${THISHOST}-id_rsa
User ansible
EOT
#Define the variable earlier before the expect script is run so it makes sense in next snipit:
ssh_key=$( cat "$HOMEDIR"/.ssh/id_rsa.pub )
#Snipit in except script where it echos over the public ssh key to the managed host from the controller.
send "sudo echo '"$ssh_key"' >> /home/ansible/.ssh/authorized_keys\n"
expect -re {:~> *$}
send "sudo chmod 644 /home/ansible/.ssh/authorized_keys\n"
expect -re {:~> *$}
#etc etc, so on and so forth properly setting attributes on this file. ```
Now things work with passwordless ssh as they should. Until they are re-ruined by the global ssh key replacement.
I have to write a shell script which ssh to another server with other username without actually asking for a password from the user?
Due to constraints I cannot use key based authentication.
let,
Source Server -- abc.efg.com
Source UserName -- tom
Source Password -- tom123
Destination Server -- xyz.efc.com
Destination UserName -- bob
destination Password -- bob123
I have to place the bash script in source server.
Please let me know if something could be done using expect tool and/or sshpass.
It is okay for me to hardcode the password for destination server in the bash script but I cannot bear an interactive session, simply when I run he script, I want to see the destination server logged in with another username.
Thanks in Advance.
You want to use key-authentication http://ornellas.apanela.com/dokuwiki/pub:ssh_key_auth
Generate your keys ssh-keygen
Copy the keys to your new box ssh-copy-id -i ~/.ssh/id_rsa.pub me#otherhost.com
ssh to other host without password ssh me#otherhost.com
You can use expect to wrap ssh, but it's pretty hectic, and fails easily when there are network errors, so test it well or use a script specifically designed for wrapping ssh passwords. Key based authentication is better.
You can prevent interactive sessions by redirecting standard input from the null device, ie.
ssh me#destination destination-command < /dev/null
About placing the script in the source server, if the script you are running is local, rather than remote, then you can pass the script on standard input, rather than the command line:
cat bashscript.sh | ssh me#destination
You can install the sshpass program, which lets you write a script like
#!/bin/bash
sshpass -p bob123 ssh UserName#xyz.efc.com
The answer is that you can't as OpenSSH actively prevent headless password-based authentication. Use key-based authentication.
You may be able to fork the OpenSSH client code and patch it, but I think that is a bit excessive.
my machine setup is as follows:
windows 7, Git for windows,Git Bash, openSSH 1.6 installed via cygwin.
I followed the instructions on https://help.github.com/articles/generating-ssh-keys
But I still have to login in everytime I push something.
I guess my setup is messed up... any help is very much appreciated.
To be able to use key-based authentication (instead of HTTP basic-auth), you have to use the SSH-Protocol. On Github, the URLs look like this:
git#github.com:username/repository.git
Once you use key authentication, you can use the common SSH tools to manage the connections. One of these tools is the SSH agent which will decrypt your private key once after loading and keep it in main memory while it is running. This allows new SSH sessions to use this key without having to bother you with a password-question.
You can add a private key to the current SSH agent session by running
ssh-add /path/to/key
If you want to remove the passphrase and it annoys you then enter:
ssh-keygen -p
enter the old passphrase and when asks for the new one, just leave it empty.
I now got it working kinda...
At first I uninstalled the ssh package from cygwin since git for windows ships with ssh.
like Holger said I had to add the key to the ssh-agent but from the git bash I was not able to add it. It worked like this:
eval 'ssh-agen.exe'
ssh-add ~/.ssh/id_rsa
After this I was able to push without entering a passphrase.
The only problem got left is that I have to add the key after every system reboot...
ANy ideas how to fix this?
These instructions are for Windows 7 and above.
Create a filename named .bashrc in your home directory (so full file path is C:\Users\XYZ\.bashrc where XYZ is your windows user name
In the file add these two lines. Note: change location of private key file if not at ~/.ssh/id_rsa
eval `ssh-agent`
ssh-add ~/.ssh/id_rsa
Open Git Bash application and you should be prompted with asking for your key's password
Is there a way to save the password of a ssh-connection inside an uri-link. AFAIK a uri can look like this username:password#domain/path. But the following example doesn't work on ubuntu:
ssh user:pass#domain/path
I always receive a "please enter password"-question. I know that it is not a quite secure way to save the password in plain text inside a link, but I have to work with other developers and what should I say... they are ex-Windows user, they don't like terminals and therefore I want to write a tiny shell script. this script should clone a remote git repo and create some specific stuff.
One click and I should do some magic!
You should use a ssh-key generated with ssh-keygen (man ssh-keygen). This is also available on the windows platform within the putty environment.
eval $(ssh-agent)
ssh-add ssh./yourkeyfilewithoutpassphrase
ssh user#sshserver "your remote command"
Befor you can use your ssh-key in the remotehost, you must insert the public key to the authorized_keys file. A convenient way is the command
ssh-copy-id -i ssh./yourkeyfilewithoutpassphrase.pub user#sshserver
or, if the key is already loaded by the ssh-agent
ssh-copy-id user#sshserver
After this point, you dont need any password for ssh connection to established remote hosts. You should use per user a different ssh-key, so you are able to enable and disable keys without bothering the other users.
You can't login with input password using ssh.
Another alternate way is setup a pair of ssh-keys, and login using ssh-key.
I follow the guide here: http://www.softwareprojects.com/resources/programming/t-ssh-no-password-without-any-private-keys-its-magi-1880.html
AFAIK, the commands ssh or scp do not have/take a password parameter. Otherwise I could keep the password in a shell variable and probably get rid of the enter password prompt. If I write an scp command in my shell script, it prompts the user to input the password. I have multiple ssh and scp commands in my script and I do not want the user to enter the password every time. I would prefer to save the password in a shell variable in the beginning (by asking password once), then use it for every ssh or scp.
I read about "public key identification" in this question. Is it related to the solution I am looking for?
Update
I read in How to use ssh command in shell script? why it is unsafe to specify passwords on the commandline. Does using expect also store the password and is world visible (using ps aux)? Is that the security issue with using expect?
Further Explanation
To further make it clear, I am writing this shell script to automate code and database backup, do code upload, run necessary database queries, do all the things that are needed for a new version release of a LAMP project from a developer system to a remote live server. My shell script will be there inside the main codebase of the project in every developer instance.
Requirement
I want all developers (all may be working from different remote systems) knowing the SSH/FTP password to be able to use the shell by entering the ssh/ftp password same only at run-time once. I would prefer the password to be the ssh/ftp password
Note - I do not want other developers who don't know the SSH password to be able to use it (So I guess public key authentication will not work because it stores the passwords in the systems).
I do not want any command line solution which stores the password in some log in the system and can be world visible using ps aux or something.
Opening Bounty
From all the answers so far and my anaylsis of those solutions, it looks like other than public key authentication all others are insecure. I am not yet sure if using expect is insecure. I think it is otherwise the correct solution for me. In that case, I am getting command not found errors while trying to do that as already commented on one of the answers.
From http://www.debianadmin.com/sshpass-non-interactive-ssh-password-authentication.html -
First and foremost, users of sshpass
should realize that ssh’s insistance
on only getting the password
interactively is not without reason.
It is close to be impossible to
securely store the password, and users
of sshpass should consider whether
ssh’s public key authentication
provides the same end-user experience,
while involving less hassle and being
more secure.
So, is it not possible to securely run multiple ssh, scp commands by entering the ssh/ftp password (if only once at runtime? Please read my Requirement section again.
Also, can anyone explain this -
In particular, people writing programs
that satisfies are meant to
communicate the above points)password
programatically are encouraged to use
an anonymous pipe and pass the pipe’s
reading end to sshpass using the -d
option.
Does this mean anything is possible?
Indeed, you'll definitely want to look into setting up ssh keys, over saving a password in a bash script. If the key is passwordless, then no user input will be required to ssh/scp. You just set it up to use the key on both ends and voila, secured communication.
However, I'll get downvoted to hell if I don't say this. Many consider passwordless ssh keys to be a Bad Idea(TM). If anybody gets their hands on the keys, the have full access. This means that you are relying on other security measures such as file permissions to keep your password safe.
Also, look into ssh-agent. It allows you to set it up so that you have a password protected ssh-key, but you only need to type it in once and it will manage the password for the key for you and use it when necessary. On my linux box at home, I have ssh-agent set up to run in my .xinitrc file so that it prompts me once and then starts X. YMMV.
UPDATE:
With regards to your requirements, password protected public key authentication + ssh-agent still seems to fit. Only the developers privy to the SSH/FTP password could start up ssh-agent, type in the password and ssh-agent would manage the passwords for the public keys for the rest of the session, never requiring interaction again.
Of course, how it stores it is another matter entirely. IANASE, but for more information on security concerns of using ssh-agent, I found symantec's article to be pretty informative: http://www.symantec.com/connect/articles/ssh-and-ssh-agent
"The ssh-agent creates a unix domain
socket, and then listens for
connections from /usr/bin/ssh on this
socket. It relies on simple unix
permissions to prevent access to this
socket, which means that any keys you
put into your agent are available to
anyone who can connect to this socket.
[ie. root]" ...
"however, [..] they are only usable
while the agent is running -- root
could use your agent to authenticate
to your accounts on other systems, but
it doesn't provide direct access to
the keys themselves. This means that
the keys can't be taken off the
machine and used from other locations
indefinitely."
Hopefully you're not in a situation where you're trying to use an untrusted root's system.
The right way to do that is as follows:
Ensure that all your users are using ssh-agent (nowadays this is the default for most Linux systems). You can check it running the following command:
echo $SSH_AUTH_SOCK
If that variable is not empty, it means that the user is using ssh-agent.
Create a pair of authentication keys for every user ensuring they are protected by a non empty passphrase.
Install the public part of the authentication keys on the remote host so that users can log there.
You are done!
Now, the first time an user wants to log into the remote machine from some session it will have to enter the passphrase for its private key.
In later logins from the same session ssh-agent will provide the unlocked key for authentication in behalf of the user that will not be required to introduce the passphrase again.
Ugh. I hit the man pages hard for this. Here's what I got:
Use this code near the beginning of the script to silently get the ssh password:
read -p "Password: " -s SSHPASS # *MUST* be SSHPASS
export SSHPASS
And then use sshpass for ssh like so:
sshpass -e ssh username#hostname
Hope that helps.
You can Using expect to pass a password to ssh do this or as said already use public key authentication instead if that's a viable option.
For password authentication, as you mentioned in you description, you can use "sshpass". On Ubuntu, you can install as "sudo apt-get install sshpass".
For public/private key-pair base authentication,
First generate keys using, "ssh-keygen"
Then copy your key to the remote machine, using "ssh-copy-id username#remote-machine"
Once copied, the subsequent logins should not ask for password.
Expect is insecure
It drives an interactive session. If you were to pass a password via expect it would be no different from you typing a password on the command line except that the expect script would have retrieve the password from somewhere. It's typically insecure because people will put the password in the script, or in a config file.
It's also notoriously brittle because it waits on particular output as the event mechanism for input.
ssh-agent
ssh-agent is a fine solution if this is script that will always be driven manually. If there is someone who will be logged in to drive the execution of the script than an agent is a good way to go. It is not a good solution for automation because an agent implies a session. You usually don't initiate a session to automatically kick of a script (ie. cron).
ssh command keys
Ssh command keys is your best bet for an automated solution. It doesn't require a session, and the command key restricts what runs on the server to only the command specified in the authorized_keys. They are also typically setup without passwords. This can be a difficult solution to manage if you have thousands of servers. If you only have a few then it's pretty easy to setup and manage.
service ssh accounts
I've also seen setups with password-less service accounts. Instead of the command entry in tehh authorized_keys file, and alternative mechanism is used to restrict access/commands. These solutions often use sudo or restricted shells. However, I think these are more complicated to manage correctly, and therefore tend to be more insecure.
host to host automatic authentication
You can also setup host 2 host automatic authentication, but there are alot of things to get write to do this correctly. From setting up your network properly, using a bastion host for host key dissemination, proper ssh server configuration, etc. As a result this is not a solution a recommend unless you know what your doing and have the capacity and ability to set everything up correctly and maintain it as such.
For those for who setting up a keypair is not an option and absolutely need to perform password authentication, use $SSH_ASKPASS:
SSH_ASKPASS - If ssh needs a passphrase, it will read the passphrase from the current terminal if it was run from a terminal. If ssh does not have a terminal associated with it but DISPLAY and SSH_ASKPASS are set, it will execute the program specified by SSH_ASKPASS and open an X11 window to read the passphrase. This is particularly useful when calling ssh from a .xsession or related script. (Note that on some machines it may be necessary to redirect the input from /dev/null to make this work.)
E.g.:
$ echo <<EOF >password.sh
#!/bin/sh
echo 'password'
EOF
$ chmod 500 password.sh
$ echo $(DISPLAY=bogus SSH_ASKPASS=$(pwd)/password.sh setsid ssh user#host id </dev/null)
See also Tell SSH to use a graphical prompt for key passphrase.
Yes, you want pubkey authentication.
Today, the only way I was able to do this in a bash script via crontab was like that:
eval $(keychain --eval --agents ssh id_rsa id_dsa id_ed25519)
source $HOME/.keychain/$HOSTNAME-sh
This is with the ssh agent already running and to achieve that it was needed the passphrase.
ssh, ssh-keygen, ssh-agent, ssh-add and a correct configuration in /etc/ssh_config on the remote systems are necessary ingredients for securing access to remote systems.
First, a private/public keypair needs to be generated with ssh-keygen. The result of the keygen process are two files: the public key and the private key.
The public key file, usually stored in ~/.ssh/id_dsa.pub (or ~/.ssh/id_rsa.pub, for RSA encryptions) needs to be copied to each remote system that will be granting remote access to the user.
The private key file should remain on the originating system, or on a portable USB ("thumb") drive that is referenced from the sourcing system.
When generating the key pair, a passphrase is used to protect it from usage by non-authenticated users. When establishing an ssh session for the first time, the private key can only be unlocked with the passphrase. Once unlocked, it is possible for the originating system to remember the unlocked private key with ssh-agent. Some systems (e.g., Mac OS X) will automatically start up ssh-agent as part of the login process, and then do an automatic ssh-add -k that unlocks your private ssh keys using a passphrase previously stored in the keychain file.
Connections to remote systems can be direct, or proxied through ssh gateways. In the former case, the remote system only needs to have the public key corresponding to the available unlocked private keys. In the case of using a gateway, the intermediate system must have the public key as well as the eventual target system. In addition, the original ssh command needs to enable agent forwarding, either by configuration in ~/.ssh/config or by command option -A.
For example, to login to remote system "app1" through an ssh gateway system called "gw", the following can be done:
ssh -At gw ssh -A app1
or the following stanzas placed in the ~/.ssh/config file:
Host app1
ForwardAgent = yes
ProxyCommand = ssh -At gw nc %h %p 2>/dev/null
which runs "net cat" (aka nc) on the ssh gateway as a network pipe.
The above setup will allow very simple ssh commands, even through ssh gateways:
ssh app1
Sometimes, even more important than terminal sessions are scp and rsync commands for moving files around securely. For example, I use something like this to synchronize my personal environment to a remote system:
rsync -vaut ~/.env* ~/.bash* app1:
Without the config file and nc proxy command, the rsync would get a little more complicated:
rsync -vaut -e 'ssh -A gw' app1:
None of this will work correctly unless the remote systems' /etc/ssh_config is configured correctly. One such configuration is to remove "root" access via ssh, which improve tracking and accountability when several staff can perform root functions.
In unattended batch scripts, a special ssh key-pair needs to be generated for the non-root userid under which the scripts are run. Just as with ssh session management, the batch user ssh key-pair needs to be deployed similarly, with the public key copied to the remote systems, and the private key residing on the source system.
The private key can be locked with a passphrase or unlocked, as desired by the system managers and/or developers. The way to use the special batch ssh key, even in a script running under root, is to use the "ssh -i ~/.ssh/id_dsa" command options with all remote access commands. For example, to copy a file within a script using the special "batch" user access:
rsync -vaut -e 'ssh -i ~batch/.ssh/id_dsa -A gw' $sourcefiles batch#app2:/Sites/www/
This causes rsync to use a special ssh command as the remote access shell. The special-case ssh command uses the "batch" user's DSA private key as its identity. The rsync command's target remote system will be accessed using the "batch" user.