I have the following makefile but it just executes the 1st command where it builds me the .o files and not the .so files. What am I doing wrong?
Thanks,
SHELL = /bin/sh
CC = gcc
CFLAGS = -g -Wall
LDFLAGS = -shared
TARGET = Stepper.so
SOURCES = $(shell echo ./*.c)
HEADERS = $(shell echo ./*.h)
OBJECTS = $(SOURCES:.c=.o)
LIBS = liblua523.a
PREFIX = $(DESTDIR)/usr/local
BINDIR = $(PREFIX)/bin
$(OBJECTS): $(SOURCES) $(HEADERS)
$(CC) $(CFLAGS) -c $(SOURCES) -o $(OBJECTS)
$(TARGET): $(OBJECTS)
$(CC) $(LDFLAGS) -o $(TARGET) $(OBJECTS) $(LIBS)
clean:
rm $(OBJECTS)
Unless you specify a different target on the command line, make always builds the first real target found in the makefile. In this case, the first real target is the first object file, so that's all that's built.
This is why you typically see makefiles with a first target of all or similar, which just depends on the various other targets you want built during a standard invocation of "make" with no arguments.
However, your makefile is really not right, in a number of ways. The fact that it's running it all means you actually only have one source file. As soon as you have >1 it will fail.
This:
SOURCES = $(shell echo ./*.c)
is not very efficient; you should use wildcard here:
SOURCES = $(wildcard ./*.c)
This rule:
$(OBJECTS): $(SOURCES) $(HEADERS)
$(CC) $(CFLAGS) -c $(SOURCES) -o $(OBJECTS)
Tells make, "for every object file, if any source file or any header file has changed, recompile it". Basically, it means that if you change ANYTHING in the directory, EVERYTHING will rebuild. If you want that you might as well write a shell script and not bother with make at all.
Further, the compiler will fail when you have >1 source file, as it will try to run:
gcc -g -Wall -c foo.c bar.c -o foo.o bar.o
which is not right.
You don't need to define this rule at all; make has a built-in rule which knows how to build an object file from a source file. Just replace it with this:
$(OBJECTS): $(HEADERS)
(no recipe) so make knows that the objects depend on the headers as well as the source. Note this is not ideal since all objects rebuild if any header changes but it's fine for a simple program.
I've got a general-purpose makefile that I've successfully used for small (personal) projects before, as below:
#Makefile to compile a folder's contents into a program.
PROGNAME := MyProgram
LIBRARIES :=
CXX := g++ --std=c++11
INCLUDES := -Isrc -Ihdr
VPATH := src:hdr
CPP_FILES := $(wildcard src/*.cpp)
OBJ_FILES := $(patsubst src/%.cpp,obj/%.o,$(CPP_FILES))
$(PROGNAME): $(OBJ_FILES)
$(CXX) $(INCLUDES) $(LIBRARIES) $^ -o $# $(ROOTFLAGS)
#Automatically generate dependencies (-MM), change the target to be the
# object file (-MT) and output it to the dependency file (-MF).
%.d: src/%.cpp
$(CXX) $(INCLUDES) -MM -MT '$(patsubst src/%.cpp,obj/%.o,$<)' $< -MF $#
obj/%.o: src/%.cpp %.d hdr/%.h
echo $#
$(CXX) $(INCLUDES) -o $# -c $< $(ROOTFLAGS)
.PHONY: clean
clean:
rm obj/*.o $(PROGNAME)
This is designed for the following directory structure:
ParentFolder/
Makefile
hdr/
file1.h
...
src/
file1.cpp
...
obj/
I gave the makefile to a colleague and they found it didn't work - after some investigation, the cause of the problem seems to be that they had a source file called main.cpp in src/, which when running make would give the following error:
make: *** No rule to make target `obj/main.o', needed by `MyProgram'. Stop.
If I rename main.cpp to something else (e.g. test.cpp) then the makefile works as expected.
What is the cause of this behaviour? I've looked through the GNU Make Manual but did not find anything regarding special treatment of files called main.* (in fact, some of the examples use it).
While trying to fix the problem, I found that defining an explicit rule for main.o meant that it would be found - therefore, I presume it's an interaction with the main name and pattern-based rules, but I have not been able to find what that may be.
The trouble is that this rule:
obj/%.o: src/%.cpp %.d hdr/%.h
echo $#
$(CXX) $(INCLUDES) -o $# -c $< $(ROOTFLAGS)
requires a corresponding header file. I suspect that there is no hdr/main.h, and Make has no way to build one, so when it is searching for a way to build obj/main.o it considers this rule, rejects it, and finds no other.
I suggest you add another pattern rule (after this one) to handle source files without matching header files:
obj/%.o: src/%.cpp %.d
echo $#
$(CXX) $(INCLUDES) -o $# -c $< $(ROOTFLAGS)
(P.S. Your dependency handling is a little odd and appears to be vestigial -- you generate dependency files and never use them. We can help you with that, once you're building main.o correctly.)
I have a trivial problem.. I am trying to modify a working Makefile to link a function I decided to add in my code simpletrial.cpp (The function is IniFile.cpp)
My old working Makefile is:
include Makefile.arch
TESTS := simpletrial.cpp
TESTO := $(TESTS:.C=.o)
TEST := simpletrial
OBJ = $(TESTO)
PROGRAMS = $(TEST)
CXXFLAGS +=
CXXFLAGS +=
GLIBS +=
.SUFFIXES: .$(SrcSuf) .$(ObjSuf) .$(DllSuf)
all: $(PROGRAMS)
$(TEST): $(TESTO)
$(LD) $(LDFLAGS) $^ $(GLIBS) $(OutPutOpt)$#
#echo "$# done"
clean:
#rm -f $(OBJ) $(TESTO) core *~ src/*~ include/*~
.$(SrcSuf).$(ObjSuf):
$(CXX) $(CXXFLAGS) -c $< -o $#
I have tried without success to compile and link IniFile.cpp but I always receive the error "undefined reference to 'IniFile:: etc etc
thanks!
Your link line is the following:
$(LD) $(LDFLAGS) $^ $(GLIBS) $(OutPutOpt)$#
Here you link with $^ which is all of the pre-reqs for the rule, which in this case is $(TESTO) and that is simpletrial.o, you don't appear to have IniFile.cpp in there, so it won't link with it. To fix it just add IniFile.cpp to your TESTS as follows:
TESTS := simpletrial.cpp InFile.cpp
Then it should compile and link both files together and produce simpletrial as a result.
Additionally I think that your TESTO line might need to change as well:
TESTO := $(TESTS:.cpp=.o)
That should take the values in the $(TESTS) variable and change the suffix from .cpp to .o, the current definition will only change .C to .o...
I'm having trouble with trying to use make to place object files in a separate subdirectory, probably a very basic technique. I have tried to use the information in this page:
http://www.gnu.org/software/hello/manual/make/Prerequisite-Types.html#Prerequisite-Types
I get the following output from make:
make: *** No rule to make target `ku.h', needed by `obj/kumain.o'. Stop.
However ku.h is a dependency not a target (although it's obviously #included within the c source files). When I don't try to use a subdirectory for object files (i.e. miss out the OBJDIR parts) it works fine. Why does make think ku.h is a target?
my makefile is this: (the style is after reading various sources of information)
.SUFFIXES:
.SUFFIXES: .c .o
CC=gcc
CPPFLAGS=-Wall
LDLIBS=-lhpdf
VPATH=%.c src
VPATH=%.h src
VPATH=%.o obj
OBJDIR=obj
objects= $(addprefix $(OBJDIR)/, kumain.o kudlx.o kusolvesk.o kugetpuz.o kuutils.o \
kurand.o kuASCboard.o kuPDFs.o kupuzstrings.o kugensud.o \
kushapes.o )
ku : $(objects)
$(CC) $(CPPFLAGS) -o ku $(objects) $(LDLIBS)
$(objects) : ku.h kudefines.h kuglobals.h kufns.h | $(OBJDIR)
$(OBJDIR):
mkdir $(OBJDIR)
.PHONY: clean
clean :
rm $(objects)
Edit:
I applied the change to use the vpath directive. My version was a bad mixture of VPATH=xxx and vpath %.c xxx. However I now get another problem (which was the original problem before I added the wrong vpath). This is now the output:
gcc -o ku -lhpdf obj/kumain.o obj/kudlx.o obj/kusolvesk.o ..etc
gcc: obj/kumain.o: No such file or directory
gcc: obj/kudlx.o: No such file or directory
gcc: obj/kusolvesk.o: No such file or directory
gcc: obj/kugetpuz.o: No such file or directory
gcc: obj/kuutils.o: No such file or directory
gcc: obj/kurand.o: No such file or directory
gcc: obj/kuASCboard.o: No such file or directory
gcc: obj/kuPDFs.o: No such file or directory
gcc: obj/kupuzstrings.o: No such file or directory
gcc: obj/kugensud.o: No such file or directory
gcc: obj/kushapes.o: No such file or directory
make: *** [ku] Error 1
It appears that make is not applying the implicit rule for an object file although the manual says
"Implicit rules tell make how to use customary techniques so that you do not have to specify them in detail when you want to use them. For example, there is an implicit rule for C compilation. File names determine which implicit rules are run. For example, C compilation typically takes a .c file and makes a .o file. So make applies the implicit rule for C compilation when it sees this combination of file name endings." and also "The search through the directories specified in VPATH or with vpath also happens during consideration of implicit rules (see Using Implicit Rules)."
Again here "For example, when a file foo.o has no explicit rule, make considers implicit rules, such as the built-in rule to compile foo.c if that file exists. If such a file is lacking in the current directory, the appropriate directories are searched for it. If foo.c exists (or is mentioned in the makefile) in any of the directories, the implicit rule for C compilation is applied."
Any assistance in getting implicit rules to work for my makefile would be greatly appreciated.
Edit no 2:
Thanks to Jack Kelly I have made an explicit rule to compile the .c files since I couldn't get anywhere trying to use implicit rules. Also thanks to al_miro for the vpath info.
Here is the working makfile:
.SUFFIXES:
.SUFFIXES: .c .o
CC=gcc
CPPFLAGS=-Wall
LDLIBS=-lhpdf
OBJDIR=obj
vpath %.c src
vpath %.h src
objects = $(addprefix $(OBJDIR)/, kumain.o kudlx.o kusolvesk.o kugetpuz.o kuutils.o \
kurand.o kuASCboard.o kuPDFs.o kupuzstrings.o kugensud.o \
kushapes.o )
ku : $(objects)
$(CC) $(CPPFLAGS) -o ku $(objects) $(LDLIBS)
$(OBJDIR) obj/%.o : %.c ku.h kudefines.h kuglobals.h kufns.h
$(CC) -c $(CPPFLAGS) $< -o $#
.PHONY : clean
clean :
rm $(objects)
Since you're using GNUmake, use a pattern rule for compiling object files:
$(OBJDIR)/%.o: %.c
$(CC) $(CFLAGS) $(CPPFLAGS) -c -o $# $<
This is the makefile that I use for most of my projects,
It permits putting source files, headers and inline files in subfolders, and subfolders of subfolders and so-forth, and will automatically generate a dependency file for each object This means that modification of headers and inline files will trigger recompilation of files which are dependent.
Source files are detected via shell find command, so there is no need to explicitly specify, just keep coding to your hearts content.
It will also copy all files from a 'resources' folder, into the bin folder when the project is compiled, which I find handy most of the time.
To provide credit where it is due, the auto-dependencies feature was based largely off Scott McPeak's page that can be found HERE, with some additional modifications / tweaks for my needs.
Example Makefile
#Compiler and Linker
CC := g++-mp-4.7
#The Target Binary Program
TARGET := program
#The Directories, Source, Includes, Objects, Binary and Resources
SRCDIR := src
INCDIR := inc
BUILDDIR := obj
TARGETDIR := bin
RESDIR := res
SRCEXT := cpp
DEPEXT := d
OBJEXT := o
#Flags, Libraries and Includes
CFLAGS := -fopenmp -Wall -O3 -g
LIB := -fopenmp -lm -larmadillo
INC := -I$(INCDIR) -I/usr/local/include
INCDEP := -I$(INCDIR)
#---------------------------------------------------------------------------------
#DO NOT EDIT BELOW THIS LINE
#---------------------------------------------------------------------------------
SOURCES := $(shell find $(SRCDIR) -type f -name *.$(SRCEXT))
OBJECTS := $(patsubst $(SRCDIR)/%,$(BUILDDIR)/%,$(SOURCES:.$(SRCEXT)=.$(OBJEXT)))
#Defauilt Make
all: resources $(TARGET)
#Remake
remake: cleaner all
#Copy Resources from Resources Directory to Target Directory
resources: directories
#cp $(RESDIR)/* $(TARGETDIR)/
#Make the Directories
directories:
#mkdir -p $(TARGETDIR)
#mkdir -p $(BUILDDIR)
#Clean only Objecst
clean:
#$(RM) -rf $(BUILDDIR)
#Full Clean, Objects and Binaries
cleaner: clean
#$(RM) -rf $(TARGETDIR)
#Pull in dependency info for *existing* .o files
-include $(OBJECTS:.$(OBJEXT)=.$(DEPEXT))
#Link
$(TARGET): $(OBJECTS)
$(CC) -o $(TARGETDIR)/$(TARGET) $^ $(LIB)
#Compile
$(BUILDDIR)/%.$(OBJEXT): $(SRCDIR)/%.$(SRCEXT)
#mkdir -p $(dir $#)
$(CC) $(CFLAGS) $(INC) -c -o $# $<
#$(CC) $(CFLAGS) $(INCDEP) -MM $(SRCDIR)/$*.$(SRCEXT) > $(BUILDDIR)/$*.$(DEPEXT)
#cp -f $(BUILDDIR)/$*.$(DEPEXT) $(BUILDDIR)/$*.$(DEPEXT).tmp
#sed -e 's|.*:|$(BUILDDIR)/$*.$(OBJEXT):|' < $(BUILDDIR)/$*.$(DEPEXT).tmp > $(BUILDDIR)/$*.$(DEPEXT)
#sed -e 's/.*://' -e 's/\\$$//' < $(BUILDDIR)/$*.$(DEPEXT).tmp | fmt -1 | sed -e 's/^ *//' -e 's/$$/:/' >> $(BUILDDIR)/$*.$(DEPEXT)
#rm -f $(BUILDDIR)/$*.$(DEPEXT).tmp
#Non-File Targets
.PHONY: all remake clean cleaner resources
The VPATH lines are wrong, they should be
vpath %.c src
vpath %.h src
i.e. not capital and without the = . As it is now, it doesn't find the .h file and thinks it is a target to be made.
In general, you either have to specify $(OBJDIR) on the left hand side of all the rules that place files in $(OBJDIR), or you can run make from $(OBJDIR).
VPATH is for sources, not for objects.
Take a look at these two links for more explanation, and a "clever" workaround.
http://mad-scientist.net/make/vpath.html
http://mad-scientist.net/make/multi-arch.html
Build from the output directory
Instead of building from the top-level directory, build from the output directory. You can access the source directories by setting the vpath. This option has the advantage that the built-in rules can be used.
build.sh
#!/bin/bash
mkdir -p obj
cp Makefile.template obj/Makefile
cd obj
make "$*"
Makefile
.SUFFIXES:
.SUFFIXES: .c .o
CC=gcc
CPPFLAGS=-Wall
LDLIBS=-lhpdf
VPATH=%.c ../src
VPATH=%.h ../src
objects=kumain.o kudlx.o kusolvesk.o kugetpuz.o kuutils.o \
kurand.o kuASCboard.o kuPDFs.o kupuzstrings.o kugensud.o \
kushapes.o
ku : $(objects)
$(objects) : ku.h kudefines.h kuglobals.h kufns.h
.PHONY: clean
clean :
rm $(objects)
The disadvantage is that error messages do not match the CWD. This can be solved by skipping build.sh and directly building from the obj directory.
Another advantage of this approach is that it's somewhat popular. cmake works in a similar fashion.
Create Rule based on output option
The following solution isn't nice in my opinion, as I really love the built-in rules. However, GNU make doesn't support something like vpath for output directories. And the built-in rules cannot match, as the % in %.o would match obj/foo of obj/foo.o, leaving make with a search in vpath %.c src/ for stuff like src/obj/foo.c, but not src/foo.c.
But this is as close to the built-in rules as you can get, and therefore to my best knowledge the nicest solution that's available.
$(OBJDIR)/%.o: %.c
$(COMPILE.c) $(OUTPUT_OPTION) $<
Explanation: $(COMPILE.c) $(OUTPUT_OPTION) $< actually is how .c.o is implemented, see http://git.savannah.gnu.org/cgit/make.git/tree/default.c (and it's even mentioned in the manual)
Besides, if $(OBJDIR) would only ever contain auto-gererated files, you could create it on-the-fly with an order-only prerequisite, making the clean rule slightly simpler:
$(OBJDIR):
mkdir -p $(OBJDIR)
$(OBJDIR)/%.o: %.c | $(OBJDIR)
$(COMPILE.c) $(OUTPUT_OPTION) $<
.PHONY: clean
clean:
$(RM) -r $(OBJDIR)
This requires that the feature order-only is available, which you can check using $(filter order-only, $(.FETAURES)). I've checked on Kubuntu 14.04 GNU make 3.81 and OpenSUSE 13.1 GNU make 3.82. Both were built with order-only enabled, and am now left puzzled why Kubuntu 14.04 comes with an older version of GNU make than OpenSUSE 13.1. Anyways, gonna download make 4.1 now :)
For anyone that is working with a directory style like this:
project
> src
> pkgA
> pkgB
...
> bin
> pkgA
> pkgB
...
The following worked very well for me. I made this myself, using
the GNU make manual as my main reference; this, in particular, was extremely helpful for my last rule, which ended up being the most important one for me.
My Makefile:
PROG := sim
CC := g++
ODIR := bin
SDIR := src
MAIN_OBJ := main.o
MAIN := main.cpp
PKG_DIRS := $(shell ls $(SDIR))
CXXFLAGS = -std=c++11 -Wall $(addprefix -I$(SDIR)/,$(PKG_DIRS)) -I$(BOOST_ROOT)
FIND_SRC_FILES = $(wildcard $(SDIR)/$(pkg)/*.cpp)
SRC_FILES = $(foreach pkg,$(PKG_DIRS),$(FIND_SRC_FILES))
OBJ_FILES = $(patsubst $(SDIR)/%,$(ODIR)/%,\
$(patsubst %.cpp,%.o,$(filter-out $(SDIR)/main/$(MAIN),$(SRC_FILES))))
vpath %.h $(addprefix $(SDIR)/,$(PKG_DIRS))
vpath %.cpp $(addprefix $(SDIR)/,$(PKG_DIRS))
vpath $(MAIN) $(addprefix $(SDIR)/,main)
# main target
#$(PROG) : all
$(PROG) : $(MAIN) $(OBJ_FILES)
$(CC) $(CXXFLAGS) -o $(PROG) $(SDIR)/main/$(MAIN)
# debugging
all : ; $(info $$PKG_DIRS is [${PKG_DIRS}])#echo Hello world
%.o : %.cpp
$(CC) $(CXXFLAGS) -c $< -o $#
# This one right here, folks. This is the one.
$(OBJ_FILES) : $(ODIR)/%.o : $(SDIR)/%.h
$(CC) $(CXXFLAGS) -c $< -o $#
# for whatever reason, clean is not being called...
# any ideas why???
.PHONY: clean
clean :
#echo Build done! Cleaning object files...
#rm -r $(ODIR)/*/*.o
By using $(SDIR)/%.h as a prerequisite for $(ODIR)/%.o, this forced make to look in source-package directories for source code instead of looking in the same folder as the object file.
I hope this helps some people. Let me know if you see anything wrong with what I've provided.
BTW: As you may see from my last comment, clean is not being called and I am not sure why. Any ideas?
For all those working with implicit rules (and GNU MAKE). Here is a simple makefile which supports different directories:
#Start of the makefile
VPATH = ./src:./header:./objects
OUTPUT_OPTION = -o objects/$#
CXXFLAGS += -Wall -g -I./header
Target = $(notdir $(CURDIR)).exe
Objects := $(notdir $(patsubst %.cpp,%.o,$(wildcard src/*.cpp)))
all: $(Target)
$(Target): $(Objects)
$(CXX) $(CXXFLAGS) -o $(Target) $(addprefix objects/,$(Objects))
#Beware of -f. It skips any confirmation/errors (e.g. file does not exist)
.PHONY: clean
clean:
rm -f $(addprefix objects/,$(Objects)) $(Target)
Lets have a closer look (I will refer to the current Directory with curdir):
This line is used to get a list of the used .o files which are in curdir/src.
Objects := $(notdir $(patsubst %.cpp,%.o,$(wildcard src/*.cpp)))
#expands to "foo.o myfoo.o otherfoo.o"
Via variable the output is set to a different directory (curdir/objects).
OUTPUT_OPTION = -o objects/$#
#OUTPUT_OPTION will insert the -o flag into the implicit rules
To make sure the compiler finds the objects in the new objects folder, the path is added to the filename.
$(Target): $(Objects)
$(CXX) $(CXXFLAGS) -o $(Target) $(addprefix objects/,$(Objects))
# ^^^^^^^^^^^^^^^^^^^^
This is meant as an example and there is definitly room for improvement.
For additional Information consult:
Make documetation. See chapter 10.2
Or:
Oracle: Programming Utilities Guide
You can specify the -o $# option to your compile command to force the output of the compile command to take on the name of the target. For example, if you have:
sources: cpp/class.cpp and cpp/driver.cpp
headers: headers/class.h
...and you want to place the object files in:
objects: obj/class.o obj/driver.o
...then you can compile cpp/class.cpp and cpp/driver.cpp separately into obj/class.o and obj/driver.o, and then link, with the following Makefile:
CC=c++
FLAGS=-std=gnu++11
INCS=-I./headers
SRC=./cpp
OBJ=./obj
EXE=./exe
${OBJ}/class.o: ${SRC}/class.cpp
${CC} ${FLAGS} ${INCS} -c $< -o $#
${OBJ}/driver.o: ${SRC}/driver.cpp ${SRC}/class.cpp
${CC} ${FLAGS} ${INCS} -c $< -o $#
driver: ${OBJ}/driver.o ${OBJ}/class.o
${CC} ${FLAGS} ${OBJ}/driver.o ${OBJ}/class.o -o ${EXE}/driver
None of these answers seemed simple enough - the crux of the problem is not having to rebuild:
makefile
OBJDIR=out
VPATH=$(OBJDIR)
# make will look in VPATH to see if the target needs to be rebuilt
test: moo
touch $(OBJDIR)/$#
example use
touch moo
# creates out/test
make test
# doesn't update out/test
make test
# will now update test
touch moo
make test
** Question edited **
Here's a typical Makefile template :
TARGET = my_prog # project name
CC = gcc -o
CFLAGS = -Wall
SOURCES := $(wildcard *.c)
INCLUDES := $(wildcard *.h)
OBJECTS := $(SOURCES:.c=*.o)
rm = rm -f
$(TARGET): $(OBJECTS)
#$(CC) $(TARGET) $(CFLAGS) $(SOURCES)
#echo "Compilation complete!"
clean:
#$(rm) $(TARGET) $(OBJECTS)
#echo "Cleanup complete!"
Question : why is the line 11 (#S(CC) $(TARGET) ...) still echoing when calling make ?
Answer : Because the problem is in the default rule and line 11 is fine.
** UPDATE **
I now have this Makefile
# project name
TARGET = my_prog
CC = gcc -c
CFLAGS = -Wall -I.
LINKER = gcc -o
LFLAGS = -Wall
SOURCES := $(wildcard *.c)
INCLUDES := $(wildcard *.h)
OBJECTS := $(SOURCES:.c=*.o)
rm = rm -f
$(TARGET): $(OBJECTS)
$(LINKER) $(TARGET) $(LFLAGS) $(OBJECTS)
$(OBJECTS): $(SOURCES) $(INCLUDES)
$(CC) $(CFLAGS) $(SOURCES)
clean:
$(rm) $(TARGET) $(OBJECTS)
Question : Why is $(CC) $(CFLAGS) $(SOURCES) being executed n times, where n is the number of source files ?
** UPDATE 2 **
Would this be a good way to solve this (seems to work...) ?
$(TARGET): obj
$(LINKER) $(TARGET) $(LFLAGS) $(OBJECTS)
obj: $(SOURCES) $(INCLUDES)
$(CC) $(CFLAGS) $(SOURCES)
The command $(CC) $(CFLAGS) $(SOURCES) is executed n times, because the rule is executed n times, because there are n objects to be built, because the $(TARGET) rule has that many objects as prerequisites. If you want the command to be run only once, replace all those prerequisites with a single PHONY prerequisite, whose rule executes the command.
But there's no reason to do it that way. You can just make the command more selective, so that it builds only the one object that was the actual target. That way Make doesn't waste time rebuilding the same objects over and over, and if one or two source files have been changed, Make will rebuild only the relevant objects, not all of them:
$(OBJECTS): %.o : %.c $(INCLUDES)
$(CC) $(CFLAGS) $<
This rule is conservative-- it assumes that every object depends on every header, so it will sometimes rebuild things unnecessarily. You can make it better, either by hand if you know the real dependencies or automatically with a more advanced technique.
EDIT:
Your "update 2" is a decent solution, but I would suggest you add the line
.PHONY: obj
to tell Make that there will be no file called "obj". Otherwise Make will run the obj rule every time, trying to build that file.
This still has the problem that if you change one source file, e.g. foo.c, Make will rebuild all the objects.
The $< I used above is an automatic variable. It means "the first prerequisite". So when Make tries to build foo.o, it will evaluate to foo.c.
EDIT:
Jack Kelly (curse him!) has pointed out that I am wrong about how PHONY targets work: the obj rule will always run, and so will the TARGET rule, whether any source files have changed or not. So the "update 2" method is effective, but crude.
I think the output is coming from generating the .o files, not geverating my_prog
Looks like you don't have a rule for creating the .o files, so make is using the default one.
Try putting this:
#echo "starting compilation"
on the line before your line 11 build command
And you can see that "starting compilation" is output after the gcc line.
Perhaps line 10 should read:
$(TARGET): $(SOURCES)
?