On one server I have setup kannel with opensmppbox and everything works. On another server I have configred a SMSC for the opensmppbox and also a fake smsc. When I try and send message to opensmppbox (curl "http://localhost:13013/cgi-bin/sendsms?smsc=opensmppbox1&username=simple&password=simple123&from=100&to=2121&text=tere") message is sent but it is sent to the fake smsc not the opensmppbox smsc.
If I had to guess my config is flawed but because my experience with kannel is very limited I can't figure out what's wrong.
Here's the config:
group = core
admin-port = 13000
admin-password = test
admin-deny-ip = "*.*.*.*"
admin-allow-ip = "127.0.0.1"
smsbox-port = 13001
box-deny-ip = "*.*.*.*"
box-allow-ip = "127.0.0.1"
dlr-storage = internal
log-file = "/var/log/kannel/mingiinfo.log"
log-level = 0
group = smsbox
smsbox-id = mysmsbox
bearerbox-host = localhost
sendsms-port = 13013
log-file = "/var/log/kannel/mingi2info.log"
log-level = 0
group = sendsms-user
username = simple
password = simple123
group = smsc
smsc = fake
smsc-id = FAKE
port = 10000
log-level = 0
group = smsc
smsc = smpp
smsc-id = opensmppbox1
allowed-prefix = "00"
host = test.server.com
port = 2346
smsc-username = "test"
smsc-password = testpw
system-type = "mysmsbox"
dest-addr-ton = 1
dest-addr-npi = 1
source-addr-ton = 5
source-addr-npi = 1
keepalive = 30
log-file = "/var/log/kannel/smsc_server2.log"
log-level = 0
interface-version = 34
validityperiod = 720
transceiver-mode = true
unified-prefix = "-,00"
group = smsbox-route
smsbox-id = mysmsbox
smsc-id = opensmppbox1
group = sms-service
keyword = default
text = "hi how are you"
accepted-smsc = opensmppbox1
So my question is what do I have to change/fix in order to send a message to my opensmppbox that's running on the other server?
TO force SMSC just add it to your URL API like &smsc=opensmppbox1
Check below link for your case
curl "http://localhost:13013/cgi-bin/sendsms?smsc=opensmppbox1&username=simple&password=simple123&from=100&to=2121&text=tere&smsc=opensmppbox1"
I'm creating an automated Outlook signature that gets data from AD. All's going well, but I keep getting whitespace (looks like padding or something) on table cells.
On Error Resume Next
Set objSysInfo = CreateObject("ADSystemInfo")
strUser = objSysInfo.UserName
Set objUser = GetObject("LDAP://" + strUser)
strName = objUser.givenName
strSurName = objUser.Sn
strFullName = objUser.Fullname
strTitle = objUser.Title
strAdres = objUser.address
strPhone = objUser.TelephoneNumber
strMob = objUser.Mobile
strEmail = objUser.mail
strMarBoo = objUser.StreetAddress
strMarLinkTxt = objUser.postOfficeBox
strMarLink = objUser.l
strDescription = objUser.Description
strIT = ""
Set objWord = CreateObject("Word.Application")
Set objDoc = objWord.Documents.Add()
Set objSelection = objWord.Selection
Set objEmailOptions = objWord.EmailOptions
Set objSignatureObject = objEmailOptions.EmailSignature
Set objSignatureEntries = objSignatureObject.EmailSignatureEntries
objSelection.ParagraphFormat.LineSpacing = 14
objSelection.TypeText "Met vriendelijke groet, "
objSelection.TypeText Chr(11)
objSelection.TypeText Chr(11)
'objSelection.Font.Color = RGB(240,73,6)
objSelection.Font.Bold = True
objSelection.TypeText strFullName
objSelection.Font.Bold = False
objSelection.TypeText Chr(11)
objSelection.Font.Color = RGB(47,84,150)
objSelection.Font.Size = 11
objSelection.TypeText strTitle + Chr(11)
objSelection.Font.Size = 11
objSelection.Font.Color = RGB(47,84,150)
Set objRange = objSelection.Range
objDoc.Tables.Add objRange, 3, 5
Set objTable1 = objDoc.Tables(1)
objTable1.TopPadding = PixelsToPoints(10, True)
objTable1.BottomPadding = PixelsToPoints(10, True)
'Merge cells in col 1
objTable1.Columns(1).Cells.Merge
objTable1.Columns(1).PreferredWidth = 90
objTable1.Columns(2).PreferredWidth = 100
objTable1.Columns(3).PreferredWidth = 150
objTable1.Columns(4).PreferredWidth = 100
objTable1.Columns(5).PreferredWidth = 200
'----------------KOLOM 1------------------------------
objTable1.Cell(1,1).Range.InlineShapes.AddPicture "\\int-vm- pdc\NETLOGON\logo_rondje_oranje_small.png"
'----------------KOLOM 2------------------------------
objTable1.Cell(1,2).Range.Font.Bold = True
objTable1.Cell(1,2).Range.Font.Color = RGB(240,73,6)
objTable1.Cell(2,2).Range.Font.Bold = True
objTable1.Cell(2,2).Range.Font.Color = RGB(240,73,6)
objTable1.Cell(3,2).Range.Font.Bold = True
objTable1.Cell(3,2).Range.Font.Color = RGB(240,73,6)
objTable1.Cell(1,2).Range.Text = "Bezoekadres"
objTable1.Cell(2,2).Range.Text = "Hoofdnummer"
objTable1.Cell(3,2).Range.Text = "Rechtstreeks"
'----------------KOLOM 3------------------------------
objTable1.Cell(1,3).Range.Text = strAdres
objTable1.Cell(2,3).Range.Text = strPhone
objTable1.Cell(3,3).Range.Text = strMob
'----------------KOLOM 4------------------------------
objTable1.Cell(1,4).Range.Font.Bold = True
objTable1.Cell(1,4).Range.Font.Color = RGB(240,73,6)
objTable1.Cell(2,4).Range.Font.Bold = True
objTable1.Cell(2,4).Range.Font.Color = RGB(240,73,6)
objTable1.Cell(3,4).Range.Font.Bold = True
objTable1.Cell(3,4).Range.Font.Color = RGB(240,73,6)
objTable1.Cell(1,4).Range.Text = "Emailadres"
objTable1.Cell(2,4).Range.Text = "Website"
'----------------KOLOM 5------------------------------
Set objCell = objTable1.Cell(1,5).Range
Set objLink = objSelection.Hyperlinks.Add(objCell, "mailto:"&strEmail, , ,strEmail)
Set objCell = objTable1.Cell(2,5).Range
Set objLink = objSelection.Hyperlinks.Add(objCell, "https://www.company.com", , ,"https://www.company.com")
objTable1.Cell(3,5).Range.Text = strDescription
objSelection.EndKey 6
With Selection.ParagraphFormat
.SpaceBefore = 0
.SpaceBeforeAuto = False
.SpaceAfter = 0
.SpaceAfterAuto = False
.LineSpacingRule = wdLineSpaceSingle
End With
Set objSelection = objDoc.Range()
objSignatureEntries.Add "Handtekening_2018_extended", objSelection
objSignatureObject.NewMessageSignature = "Handtekening_2018_extended"
objSignatureObject.ReplyMessageSignature = "Handtekening_2018_extended"
objDoc.Saved = True
objWord.Quit
See image for a screenshot of the result:
Already tried setting Font.LineHeight, objTable1.Rows(1).Height, but nothing seems to work.
Anyone knows how to solve this?
Maybe there is some more detailed documentation that I cannot find about styling?
I have setup Jmeter with InfluxDB and Grafana, and adding "JMeter-InfluxDB-Writer 1.1" as mentioned in the documentation link "https://grafana.net/dashboards/1152".
With this, I am seeing some of the samples are missing (shows 8/10 samples for some of the api's) when queried in the InfluxDB although Jmeter Summary report shows 10/10 samples run for all the api's.
Also attaching my infuxDB.conf for any inputs. Please help
infuxDB.conf -
reporting-disabled = false
bind-address = ":8088"
[meta]
dir = "C:\\Users\\Administrator\\.influxdb\\meta"
retention-autocreate = true
logging-enabled = true
[data]
dir = "C:\\Users\\Administrator\\.influxdb\\data"
wal-dir = "C:\\Users\\Administrator\\.influxdb\\wal"
query-log-enabled = true
cache-max-memory-size = 1073741824
cache-snapshot-memory-size = 26214400
cache-snapshot-write-cold-duration = "10m0s"
compact-full-write-cold-duration = "4h0m0s"
max-series-per-database = 1000000
max-values-per-tag = 100000
trace-logging-enabled = false
[coordinator]
write-timeout = "10s"
max-concurrent-queries = 0
query-timeout = "0s"
log-queries-after = "0s"
max-select-point = 0
max-select-series = 0
max-select-buckets = 0
[retention]
enabled = true
check-interval = "30m0s"
[shard-precreation]
enabled = true
check-interval = "10m0s"
advance-period = "30m0s"
[admin]
enabled = true
bind-address = ":8083"
https-enabled = false
https-certificate = "/etc/ssl/influxdb.pem"
[monitor]
store-enabled = true
store-database = "_internal"
store-interval = "10s"
[subscriber]
enabled = true
http-timeout = "60s"
insecure-skip-verify = false
ca-certs = ""
write-concurrency = 40
write-buffer-size = 1000
[http]
enabled = true
bind-address = ":443"
auth-enabled = false
log-enabled = true
write-tracing = false
pprof-enabled = true
https-enabled = false
https-certificate = "/etc/ssl/influxdb.pem"
https-private-key = ""
max-row-limit = 10000
max-connection-limit = 0
shared-secret = ""
realm = "InfluxDB"
unix-socket-enabled = false
bind-socket = "/var/run/influxdb.sock"
[[graphite]]
enabled = true
bind-address = ":2003"
database = "jmeter"
retention-policy = ""
protocol = "tcp"
batch-size = 5000
batch-pending = 100
batch-timeout = "60s"
consistency-level = "one"
separator = "."
udp-read-buffer = 0
[[collectd]]
enabled = false
bind-address = ":25826"
database = "collectd"
retention-policy = ""
batch-size = 5000
batch-pending = 10
batch-timeout = "10s"
read-buffer = 0
typesdb = "/usr/share/collectd/types.db"
security-level = "none"
auth-file = "/etc/collectd/auth_file"
[[opentsdb]]
enabled = false
bind-address = ":4242"
database = "opentsdb"
retention-policy = ""
consistency-level = "one"
tls-enabled = false
certificate = "/etc/ssl/influxdb.pem"
batch-size = 1000
batch-pending = 5
batch-timeout = "1s"
log-point-errors = truea
[[udp]]
enabled = false
bind-address = ":8089"
database = "udp"
retention-policy = ""
batch-size = 5000
batch-pending = 10
read-buffer = 0
batch-timeout = "1s"
precision = ""
[continuous_queries]
log-enabled = true
enabled = true
run-interval = "1s"
It seems there is a pagination and its probably set up to show only 8 lines in a page. The other two sample data could be in the page 2.
Sending an email with a text file attached, this works (test email is received):
Set emailObj = CreateObject("CDO.Message")
emailObj.From = "sender#domain.tld"
emailObj.To = "recipient#domain.tld"
emailObj.Subject = "File attached"
emailObj.TextBody = "Please have a look at the attached file. Thanks."
emailObj.AddAttachment "d:\temp\test.txt"
Set emailConfig = emailObj.Configuration
emailConfig.Fields("http://schemas.microsoft.com/cdo/configuration/smtpserver") = "server.webhost.com"
emailConfig.Fields("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = 465
emailConfig.Fields("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
emailConfig.Fields("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1
emailConfig.Fields("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = true
emailConfig.Fields("http://schemas.microsoft.com/cdo/configuration/sendusername") = "sender#domain.tld"
emailConfig.Fields("http://schemas.microsoft.com/cdo/configuration/sendpassword") = "top_secret"
emailConfig.Fields.Update
emailObj.Send
If err.number = 0 then Msgbox "Your file has been sent. Someone will respond as soon as possible."
But when I try to send a binary file, this does NOT work (test email message is not received):
Set emailObj = CreateObject("CDO.Message")
emailObj.From = "sender#domain.tld"
emailObj.To = "recipient#domain.tld"
emailObj.Subject = "File attached"
emailObj.TextBody = "Please have a look at the attached file. Thanks."
emailObj.AddAttachment "d:\temp\test.rtf"
Set emailConfig = emailObj.Configuration
emailConfig.Fields("http://schemas.microsoft.com/cdo/configuration/smtpserver") = "server.webhost.com"
emailConfig.Fields("http://schemas.microsoft.com/cdo/configuration/smtpserverport") = 465
emailConfig.Fields("http://schemas.microsoft.com/cdo/configuration/sendusing") = 2
emailConfig.Fields("http://schemas.microsoft.com/cdo/configuration/smtpauthenticate") = 1
emailConfig.Fields("http://schemas.microsoft.com/cdo/configuration/smtpusessl") = true
emailConfig.Fields("http://schemas.microsoft.com/cdo/configuration/sendusername") = "sender#domain.tld"
emailConfig.Fields("http://schemas.microsoft.com/cdo/configuration/sendpassword") = "top_secret"
emailConfig.Fields.Update
emailObj.Send
If err.number = 0 then Msgbox "Your file has been sent. Someone will respond as soon as possible."
What do I need to add/change to be able to attach a binary file?
System:
Win7 Home,
Open ERP 6.1 all in one
How to set the integrated Webclient Hostname from localhost:8069 to 127.0.0.1:8069 ?
I need to access the machine for development purposes from the internet.
In Version 6.0 I could find the hostname parameter for the webclient in the file openerp-web.cfg.
But in Version 6.1 the webclient is embed in the core and there is no openerp-web.cfg.
openerp-server.conf
[options]
without_demo = False
smtp_port = 25
db_template = template0
db_password = XXXXXX
xmlrpcs = True
xmlrpcs_interface =
syslog = False
logrotate = True
xmlrpcs_port = 8071
test_report_directory = False
list_db = True
timezone = False
xmlrpc_interface =
test_file = False
cache_timeout = 100000
smtp_password = False
secure_pkey_file = server.pkey
xmlrpc_port = 8069
log_level = info
xmlrpc = True
test_disable = False
admin_passwd = XXXXX
assert_exit_level = error
smtp_server = localhost
static_http_url_prefix = None
unaccent = False
test_commit = False
proxy_mode = False
demo = {}
db_host = localhost
login_message = False
import_partial =
pidfile = False
db_maxconn = 64
osv_memory_count_limit = False
reportgz = False
osv_memory_age_limit = 1.0
netrpc_port = 8070
db_port = 5432
virtual_memory_reset = 671088640
db_name = False
debug_mode = False
netrpc = True
secure_cert_file = server.cert
logfile = C:\Program Files (x86)\OpenERP 6.1-1\server\openerp-server.log
csv_internal_sep = ,
virtual_memory_limit = 805306368
pg_path = C:\Program Files (x86)\OpenERP 6.1-1\PostgreSQL\bin
static_http_enable = False
cpu_time_limit = 60
translate_modules = ['all']
smtp_ssl = False
server_wide_modules = None
netrpc_interface =
smtp_user = False
log_handler = [':INFO']
db_user = XXXXX
dbfilter = .*
max_cron_threads = 4
email_from = False
addons_path = C:\Program Files (x86)\OpenERP 6.1-1\server\openerp\addons
static_http_document_root = None
xmlrpc_interface = my_ip
xmlrpc_port = my_port
no need to change anything on openerp :
1- create a dyndns account ( i use no-ip.com) ,if ur router is configurable to use dynamic dns then ok,else u need to install a client for that on the machine that hosts openerp.
once is that done, u can connect to http://xxx.np-ip.org:8069