This is the contents of my /etc/rc.local file. It is supposed to run on login on my raspberry pi, yet it just logs in in (as I'm using auto login) and then does nothing, i.e. it just sits there with pi#raspberrypi ~$_ waiting for a command. I have no idea why it's not working nor any experience with bash scripts.
It should mount a usb then run a file on said usb but it doesn't.
#!/bin/sh -e
#
# rc.local
#
# This script is executed at the end of each multiuser runlevel.
# Make sure that the script will "exit 0" on success or any other
# value on error.
#
# In order to enable or disable this script just change the execution
# bits.
#
# By default this script does nothing.
sudo /bin/mount /dev/sda1 /media/robousb
sudo python media/robousb/Robopython/usercode_old.py
exit 0
I assuming you're running Raspbian, which is pretty much Debian.
rc.local runs as root before login, so you don't need or want sudo; it may be causing an error, hence nothing happening.
User-level commands that run for any user when they log in (unlike rc.local, which runs before login) can be put into /etc/bash.bashrc. That may be more applicable to your situation, at least the second command.
Login commands for the pi user only can be put into /home/pi/.bashrc
I don't know raspberry-pi but you could try to write something into a file to see if the file is running or not. For example :
touch /tmp/test.txt
echo "$(date) => It's running" > /tmp/test.txt
If it doesn't work, I know that on some OS (fedora, rhel, centos for example), the path of that file is /etc/init.d/rc.local. It doesn't cost anything to try this path ;)
I have the exact same problem with RPi3/Jessie.
I suggest you to launch your script in the bashrc by doing
sudo emacs /home/pi/.bashrc
In my case i wrote at the EOF:
bash /home/pi/jarvis/jarvis.sh -b &
And that works well at each startup.
I have the same problem. In Raspbian forum is the solution:
Just change the first row from #!/bin/sh -e to
#!/bin/bash
Ivan X is right. You don´t need sudo command.
Related
I have a WSL Ubuntu distro that I've set up so that when I login 4 services start working, including a web API that I can test via Swagger to verify it is up and working.
I'm at the point where what I want to do now is start WSL via a script - that is, launch my distro, have all of the services start, and do it from Python. The problem is I cannot even figure out the correct syntax to get WSL to start from PowerShell in a manner where my services start.
Side note: "services" != systemctl (or similar) calls, but just executing bash CLI commands from either my .bashrc or .profile at login.
I've put the commands to execute in .profile & .bashrc. I've configured it both for root execution and non-root user execution. I've taken the commands out of those 2 files and put it into a script in the Windows file system that I pass in on the start of wsl. And I've put that shell script in the WSL file system as well. Nothing seems to work, and sometimes the distro starts and then stops after about 30 seconds.
Some of the PS CLI commands I've tried:
Start-Job -ScriptBlock{ wsl -d distro -u root }
Start-Job -ScriptBlock{ wsl -d distro -u root 'bash -i -l -c /root/bin/start.sh'
Start-Job -ScriptBlock{ wsl -d distro -u root 'bash -i -l -c .\start.sh'
wsl -d distro -u root -- bash -i -l -c /root/bin/start.sh
wsl -d distro -u root -- bash -i -l -c .\start.sh
wsl -d distro -u root -- /root/bin/start.sh
Permutations of the above that I've tried: replace root with my default login, and turning all of the Start-Job bash options into a comma-separated list of single-quoted strings (Ex: 'bash', '-i', '-l', ... ). Nothing I launch from the CLI will allow me access to the web API that is supposed to be hosted on my distro.
Any advice on what to try next?
Not necessarily an answer here as much as troubleshooting tips which will hopefully lead to an answer:
First, most of the forms that you are using seem to be correct. The only ones that absolutely shouldn't work are those that attempt to run the script from the Windows filesystem.
Make sure that you have a shebang line starting your script. I'm assuming you do, but other readers may come across this as well. For the moment, try this form:
#!/usr/bin/env -S bash -li
That's going to have the same effect as the bash -li you tried -- It will source both both interactive startup files such as ~/.bashrc as well as login profiles such as ~/.bash_profile (and /etc/profile.d/*, etc.).
Note that preferably, you won't need the -li. Best practice would be to move anything necessary for the services over from the startup scripts to your start.sh script, and avoid parsing the profile and rc. I need to go update some of my answers, since I just realized I've been guilty of giving some potentially bad advice ...
Specifically, though, I'm wondering if your interactive Bash config has something truly, well, "interactive" in it that might be preventing the automatic running of the script itself. Again, best practice would be for ~/.bashrc to only hold configuration that is needed for interactive shell sessions.
Make sure the script is set as executable (chmod +x start.sh). Again, I'm assuming this is the case for you.
With a shebang line and an executable script, use something like:
wsl -d distro -u root -e /root/bin/start.sh
The -e tells WSL to launch the script directly. Since it has a shebang line, it will be parsed by Bash. Most of the other forms you use above actually run Bash twice - Once when launching WSL and another when it finds the shebang line in the script.
Try some basic troubleshooting for your script like:
Add set -x to the top (right under the shebang line) to turn on script debugging.
Add a ps -efH at the end to show the processes that are running when the script completes
If needed, resort to quick-and-dirty echo statements to show where things have progressed in the script.
I'm hopeful that the above will at least show you the problem, but if not, add the debugging info that you gain from this to your question, and we can troubleshoot further.
So I am making a script that can run these commands whenever a server boot/reboot:
sudo bash
su - erp
cd frappe-bench/
bench start >/tmp/bench_log &
I found guides here and there about how can I change user in script I came out with the following script:
#! /bin/sh
sudo -u erp bash
cd /home/erp/frappe-bench/
bench start >/tmp/bench_log &
And, I have created a service at /etc/systemd/system/ and set it to run automatically when the server boots up.
The problem is, whenever I run sudo systemctl start erpnextd.service and checked the status, it came up with this
May 24 17:10:05 appbsystem2 systemd[1]: Started ERPNext | Auto Restart.
May 24 17:10:05 appbsystem2 sudo[18814]: root : TTY=unknown ; PWD=/ ; USER=>erp ; COMMAND=/bin/bash
May 24 17:10:05 appbsystem2 systemd[1]: erpnextd.service: Succeeded.
But it still doesn't start up ERPNext.
All I wanted to do is make a script that will start erpnext automatically everytime a server reboot.
Note: I only install frappe-bench on user erp only
Because you are using systemd, you already have all the features from your script available, and better. So you don't even need the script anymore:
[Unit]
Description=...
[Service]
# Run as user erp.
User=erp
# You probably also want to run as group erp, if it exists.
Group=erp
# Change to this directory before executing.
WorkingDirectory=/home/erp/frappe-bench
# Redirect standard output to the given log file.
StandardOutput=file:/tmp/bench_log
# Redirect standard error to the same log file.
StandardError=file:/tmp/bench_log
# Command line for starting the program. Make sure to use an absolute path!
ExecStart=/full/path/to/bench start
[Install]
WantedBy=multi-user.target
Using crontab (the script will start after every reboot/startup)
#crontab -e
#reboot sh /full/path/to/bench start >/tmp/bench_log
The answer provide by Thomas is very helpful.
However, I found another workaround by adding the path of my script file into the bottom of /etc/rc.local file.
Both method works, just a matter of preference ;)
I'm making a small edit to a shell script I use to mask password inputs like so:
#!/bin/bash
printf "Enter login and press [ENTER]\n"
read user
printf "Enter password and press [ENTER]\n"
read -s -p pass
With the read -s -p pass being the updated part. For some reason I'm not seeing the changes when I run it normally by entering script.sh into the command line but I do see the changes when I run sh script.sh. I've tried opening new terminal windows, and have run it in both ITerm and the default Mac terminal. I'm far from a scripting master, does anyone know why I'm not seeing the changes without the prefix?
Use a full or relative path to the script to make sure you're running what you think you're running.
If you are running it as simply script.sh then the shell will PATH environment variable lookup to locate it. To see which script.sh bash would be using in that case, run type script.sh.
Relative Path
./script.sh
Full Path
/path/to/my/script.sh
I have a user, who's a passwordless sudoer. I need to execute shell script file with him, and make him execute one block as sudo. E.g:
su root <<"AS_ROOT"
# do something with my linux
AS_ROOT
But nothing works. I tried:
su - root <<...
sudo -s -- <<...
It barks back at me. I'm on ubuntu 16.04 lts.
Thank you.
As Cyrus points out, su is a different utility to which sudo's configuration doesn't apply.
It sounds like you're looking for something like this:
sudo -s <<'AS_ROOT'
echo "Hi from $USER."
AS_ROOT
This should output Hi from root.
Note that -s is needed to tell sudo to create a shell in order to interpret the commands passed via stdin (the here-doc). That shell is the current user's default shell, as reflected in environment variable $SHELL.
I am trying to have my Ubuntu 12.04 LTS server run a bash script I have to start a Minecraft server on start up, prior to log in but as user minecraft. I can have it run as root by placing the following in /etc/rc.local
bash /path/to/script/script.sh
which runs the script as root, I have tried the following in /etc/rc.local
su -c `bash /path/to/script/script.sh` minecraft
but to no avail. Can anyone tell me what I am doing wrong or should be doing instead? The first line of my script is
#!/bin/bash
in case it is important. Thanks much!
Try
su minecraft -c '/bin/bash /path/to/script/script.sh &'
The user should be the first argument to su.
You should use quotes and not ticks for the command argument (-c)
You may want to consider using su -l minecraft to have the script run in an environment which would be similar to that if the user minecraft logged in directly.
Give this a shot and let me know if it works.