i can not include websockets module in kamailio there no websockets.os in kamailio source in/usr/local/src/kamailio-4.0/kamailio/modules/websockets/or
/usr/local/src/kamailio-4.0/kamailio/modules_k/websockets/
i try to install kamailio-4.0 from git i follow this link
http://www.kamailio.org/wiki/install/4.0.x/gitenter link description here
Be sure you added websocket module to be compiled. It depends on libunistring and because of that it is not compiled by default.
To compile it, do:
make include_modules="websocket" cfg
make all
make install
If you need other extra module, add it to include_modules value. For example, to compile db_mysql and websocket, use:
make include_modules="db_mysql websocket" cfg
The alternative is to edit the file modules.lst and add the extra modules to "include_modules" variable. If you don't have the file modules.lst, do:
make cfg
After editing the file, do the usual "make all; make install".
Related
I have an autotools project which successfully builds and tests an app (https://github.com/goglecm/AutoBrightnessCam). The app is installed in the bin directory (preceded by any prefix the user specifies). That's pretty straightforward. I now need to make a systemd service to start it at boot time. I've created the service file and ran it manually and it works fine.
The last bit is to tell configure.ac and Makefile.am to patch a *.service.in file with the correct path for the app (just like config.h is created from config.h.in).
Will using AC_CONFIG_HEADERS be appropriate to patch *.service.in into *.service? Is there another macro used for "non-headers" perhaps?
Also, how do I specify that the service file should land (i.e. installed) in /etc/systemd/system?
Is there perhaps a better way of starting this app at boot time without systemd?
How do I specify that the service file should land (i.e. installed) in /etc/systemd/system?
According to Systemd's daemon man page:
<BEGINQUOTE>
Installing systemd Service Files
At the build installation time (e.g. make install during package build), packages are recommended to install their systemd unit files in the directory returned by pkg-config systemd --variable=systemdsystemunitdir (for system services) or pkg-config systemd --variable=systemduserunitdir (for user services). This will make the services available in the system on explicit request but not activate them automatically during boot. Optionally, during package installation (e.g. rpm -i by the administrator), symlinks should be created in the systemd configuration directories via the enable command of the systemctl(1) tool to activate them automatically on boot.
Packages using autoconf(1) are recommended to use a configure script excerpt like the following to determine the unit installation path during source configuration:
PKG_PROG_PKG_CONFIG
AC_ARG_WITH([systemdsystemunitdir],
[AS_HELP_STRING([--with-systemdsystemunitdir=DIR], [Directory for systemd service files])],,
[with_systemdsystemunitdir=auto])
AS_IF([test "x$with_systemdsystemunitdir" = "xyes" -o "x$with_systemdsystemunitdir" = "xauto"], [
def_systemdsystemunitdir=$($PKG_CONFIG --variable=systemdsystemunitdir systemd)
AS_IF([test "x$def_systemdsystemunitdir" = "x"],
[AS_IF([test "x$with_systemdsystemunitdir" = "xyes"],
[AC_MSG_ERROR([systemd support requested but pkg-config unable to query systemd package])])
with_systemdsystemunitdir=no],
[with_systemdsystemunitdir="$def_systemdsystemunitdir"])])
AS_IF([test "x$with_systemdsystemunitdir" != "xno"],
[AC_SUBST([systemdsystemunitdir], [$with_systemdsystemunitdir])])
AM_CONDITIONAL([HAVE_SYSTEMD], [test "x$with_systemdsystemunitdir" != "xno"])
This snippet allows automatic installation of the unit files on systemd machines, and optionally allows their installation even on machines lacking systemd. (Modification of this snippet for the user unit directory is left as an exercise for the reader.)
Additionally, to ensure that make distcheck continues to work, it is recommended to add the following to the top-level Makefile.am file in automake(1)-based projects:
AM_DISTCHECK_CONFIGURE_FLAGS = \
--with-systemdsystemunitdir=$$dc_install_base/$(systemdsystemunitdir)
Finally, unit files should be installed in the system with an automake excerpt like the following:
if HAVE_SYSTEMD
systemdsystemunit_DATA = \
foobar.socket \
foobar.service
endif
...
</ENDQUOTE>
So it appears you should use systemdsystemunitdir and systemduserunitdir. How well Autotools supports it, well...
A quick grep on Fedora 31 using grep systemdsystemunitdir /bin/autoconf and grep -IR systemdsystemunitdir /usr/share shows no Autotools support yet. 7 years and counting...
Is there perhaps a better way of starting this app at boot time without systemd?
Systemd should be OK to start your app. Simply use systemctl(1) to enable and start them as you normally would.
Based on your GitHub and autobrightnesscam.service.in, I would not dick around with Autotools for this. You can waste copious amounts of time working around Autotols short comings (speaking from experience).
My configure.ac script (which is just a shell script) would copy autobrightnesscam.service.in to autobrightnesscam.service, and then use sed to copy-in the correct directories and files. Then, I would copy the updated autobrightnesscam.service to its proper location in AC_CONFIG_COMMANDS_POST. Maybe something like:
SERVICE_FILE=autobrightnesscam.service
SYSTEMD_DIR=`pkg-config systemd --variable=systemdsystemunitdir`
# Use default if SYSTEMD_DIR is empty
if test x"$SYSTEMD_DIR" = "x"; then
SYSTEMD_DIR=/etc/systemd/system
fi
AC_CONFIG_COMMANDS_POST([cp "$SERVICE_FILE" "$SYSTEMD_DIR"])
AC_CONFIG_COMMANDS_POST([systemctl enable "$SYSTEMD_DIR/$SERVICE_FILE"])
AC_CONFIG_COMMANDS_POST([systemctl start "$SERVICE_FILE"])
Will using AC_CONFIG_HEADERS be appropriate to patch *.service.in into *.service? Is there another macro used for "non-headers" perhaps?
No. AC_CONFIG_HEADERS is for setting up configuration headers to support your build. It is rarely used for anything other than building a config.h recording the results of certain tests that Autoconf performs, and it is not as flexible as other options in this area.
If you have additional files that you want Autoconf to build from templates then you should tell Autoconf about them via AC_CONFIG_FILES. Example:
AC_CONFIG_FILES([Makefile AutoBrightnessCam.service])
But if some of the data with which you are filling that template are installation directories then Autoconf is probably not the right place to do this at all, because it makes provision for the installation prefix to be changed by arguments to make. You would at least need to work around that, but the best thing to do is to roll with it instead, and build the .service file under make's control. It's not that hard, and there are several technical advantages, some applying even if there aren't any installation directory substitutions to worry about.
You can do it the same way that configure does, by running the very same template you're already using through sed, with an appropriate script. Something like this would appear in your Makefile.am:
SERVICE_SUBS = \
s,[#]VARIABLE_NAME[#],$(VARIABLE_NAME),g; \
s,[#]OTHER_VARIABLE[#],$(OTHER_VARIABLE),g
AutoBrightnessCam.service: AutoBrightnessCam.service.in
$(SED) -e '$(SERVICE_SUBS)' < $< > $#
Also, how do I specify that the service file should land (i.e.
installed) in /etc/systemd/system?
You use Automake's standard mechanism for specifying custom installation locations. Maybe something like this:
sytemdsysdir = $(sysconfdir)/systemd/system
systemdsys_DATA = AutoBrightnessCam.service
Is there perhaps a better way of
starting this app at boot time without systemd?
On a systemd-based machine, systemd is in control of what starts at boot. If you want the machine to start your application automatically at boot, then I think your options are limited to
Configuring systemd to start it
Configuring something in a chain of programs ultimately started by systemd to start it
Hacking the bootloader or kernel to start it
There is room for diverging opinions here, but I think the first of those is cleanest and most future-proof, and I cannot recommend the last.
Using menuconfig for nuttx development.
Was trying to do below for custom board setup:
if ARCH_BOARD_FOO
source "configs/FOO/Kconfig"
endif
Problem here, I would like to have some permission control for FOO directory. So not all users can see it.
However, kconfig language seems will always parse the file no matter the if condition is true or not. Therefore this causing make menuconfig could not open for users do not have permission of FOO directory.
Anyone know solution for that?
Try using a custom board configuration. Then your board directory can lie inside or outside of the NuttX source tree. In either case, it will not be visible to the configuration system. you would configure this like:
CONFIG_ARCH_BOARD_CUSTOM=y
CONFIG_ARCH_BOARD_CUSTOM_NAME="myboard"
CONFIG_ARCH_BOARD_CUSTOM_DIR="/home/users/me/myboard"
... and other options ...
In the above example, the board directory lies outside of the NuttX source tree and is an absolute path. The board configuration could also lie inside of the NuttX and the path may be specified as relative to the top-level directory with:
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
For example:
CONFIG_ARCH_BOARD_CUSTOM_DIR="configs/FOO"
CONFIG_ARCH_BOARD_CUSTOM_DIR_RELPATH=y
Now if CONFIG_ARCH_BOARD_CUSTOM=y is not defined, there is no way to access /home/users/me/myboard or configs/FOO from the configuration system.
This works because the custom board Kconfig file will be linked to configs/dummy/Kconfig in the custom configuration with CONFIG_ARCH_BOARD_CUSTOM=y. Otherwise configs/dummy/Kconfig will be linked to an empty configuration to satisfy the configuration system.
In order to ignore the error, you could use:
if ARCH_BOARD_FOO
-source "configs/FOO/Kconfig"
endif
Introduction
I have a do_install task in a BitBake recipe which I've written for a driver where I execute a custom install script. The task fails because the installation script cannot find kernel source header files within <the image rootfs>/usr/src/kernel. This script runs fine on the generated OS.
What's Happening
Here's the relevant part of my recipe:
SRC_URI += "file://${TOPDIR}/example"
DEPENDS += " virtual/kernel linux-libc-headers "
do_install () {
( cd ${TOPDIR}/example/Install ; ./install )
}
Here's a relevant portion of the install script:
if [ ! -d "/usr/src/kernel/include" ]; then
echo ERROR: Linux kernel source include directory not found.
exit 1
fi
cd /usr/src/kernel
make scripts
...
./install_drv pci ${DRV_ARGS}
I checked changing to if [ ! -d "/usr/src/kernel" ], which also failed. install passes different options to install_drv, which I have a relevant portion of below:
cd ${DRV_PATH}/pci
make NO_SYSFS=${ARG_NO_SYSFS} NO_INSTALL=${ARG_NO_INSTALL} ${ARGS_HWINT}
if [ ${ARG_NO_INSTALL} == 0 ]; then
if [ `/sbin/lsmod | grep -ci "uceipci"` -eq 1 ]; then
./unload_pci
fi
./load_pci DEBUG=${ARG_DEBUG}
fi
The make target build: within ${DRV_PATH}/pci is essentially this:
make -C /usr/src/kernel SUBDIRS=${PWD} modules
My Research
I found these comments within linux-libc-headers.inc relevant:
# You're probably looking here thinking you need to create some new copy
# of linux-libc-headers since you have your own custom kernel. To put
# this simply, you DO NOT.
#
# Why? These headers are used to build the libc. If you customise the
# headers you are customising the libc and the libc becomes machine
# specific. Most people do not add custom libc extensions to the kernel
# and have a machine specific libc.
#
# But you have some kernel headers you need for some driver? That is fine
# but get them from STAGING_KERNEL_DIR where the kernel installs itself.
# This will make the package using them machine specific but this is much
# better than having a machine specific C library. This does mean your
# recipe needs a DEPENDS += "virtual/kernel" but again, that is fine and
# makes total sense.
#
# There can also be a case where your kernel extremely old and you want
# an older libc ABI for that old kernel. The headers installed by this
# recipe should still be a standard mainline kernel, not your own custom
# one.
I'm a bit unclear if I can 'get' the headers from the STAGING_KERNEL_DIR properly since I'm not using make.
Within kernel.bbclass provided in the meta/classes directory, there is this variable assigment:
# Define where the kernel headers are installed on the target as well as where
# they are staged.
KERNEL_SRC_PATH = "/usr/src/kernel"
This path is then packaged later within that .bbclass file here:
PACKAGES = "kernel kernel-base kernel-vmlinux kernel-image kernel-dev kernel-modules"
...
FILES_kernel-dev = "/boot/System.map* /boot/Module.symvers* /boot/config* ${KERNEL_SRC_PATH} /lib/modules/${KERNEL_VERSION}/build"
Update (1/21):
A suggestion on the yocto IRC channel was to use the following line:
do_configure[depends] += "virtual/kernel:do_shared_workdir"
which is corroborated by the Yocto Project Reference Manual, which states that in version 1.8, there was the following change:
The kernel build process was changed to place the source in a common shared work area and to place build artifacts separately in the source code tree. In theory, migration paths have been provided for most common usages in kernel recipes but this might not work in all cases. In particular, users need to ensure that ${S} (source files) and ${B} (build artifacts) are used correctly in functions such as do_configure and do_install. For kernel recipes that do not inherit from kernel-yocto or include linux-yocto.inc, you might wish to refer to the linux.inc file in the meta-oe layer for the kinds of changes you need to make. For reference, here is the commit where the linux.inc file in meta-oewas updated.
Recipes that rely on the kernel source code and do not inherit the module classes might need to add explicit dependencies on the do_shared_workdir kernel task, for example:
do_configure[depends] += "virtual/kernel:do_shared_workdir"
But I'm having difficulties applying this to my recipe. From what I understand, I should be able to change the above line to:
do_install[depends] += "virtual/kernel:do_shared_workdir"
Which would mean that the do_install task now must be run after do_shared_workdir task of the virtual/kernel recipe, which means that I should be able to work with the shared workdir (see Question 3 below), but I still have the same missing kernel header issue.
My Questions
I'm using a custom linux kernel (v3.14) from git.kernel.org. which inherits the kernel class. Here are some of my questions:
Shouldn't the package kernel-dev be a part of any recipe which inherits the kernel class? (this section of the variables glossary)
If I add the virtual/kernel to the DEPENDS variable, wouldn't that mean that the kernel-dev would be brought in?
If kernel-dev is part of the dependencies of my recipe, wouldn't I be able to point to the /usr/src/kernel directory from my recipe? According to this reply on the Yocto mailing list, I think I should.
How can I properly reference the kernel source header files, preferably without changing the installation script?
Consider your Environment
Remember that there are different environments within the the build time environment, consisting of:
sysroots
in the case of kernels, a shared work directory
target packages
kernel-dev is a target package, which you'd install into the rootfs of the target system for certain things like kernel symbol maps which are needed by profiling tools like perf/oprofile. It is not present at build time although some of its contents are available in the sysroots or shared workdir.
Point to the Correct Directories
Your do_install runs at build time so this is within the build directory structures of the build system, not the target one. In particular, /usr/src/ won't be correct, it would need to be some path within your build directory. The virtual/kernel do_shared_workdir task populates ${STAGING_DIR_KERNEL} so you would want to change to that directory in your script.
Adding a Task Dependency
The:
do_install[depends] += "virtual/kernel:do_shared_workdir
dependency like looks correct for your use case, assuming nothing in do_configure or do_compile accesses the data there.
Reconsider the module BitBake class
The other answers are correct in the recommendation to look at module.bbclass, since this illustrates how common kernel modules can be built. If you want to use custom functions or make commands, this is fine, you can just override them. If you really don't want to use that class, I would suggest taking inspiration from it though.
Task Dependencies
Adding virtual/kernel to DEPENDS means virtual/kernel:do_populate_sysroot must run before our do_configure task. Since you need a dependency for do_shared_workdir here, a DEPENDS on virtual/kernel is not enough.
Answer to Question 3
The kernel-dev package would be built, however it would then need to be installed into your target image and used at runtime on a real target. You need this at build time so kernel-dev is not appropriate.
Other Suggestions
You'd likely want the kernel-devsrc package for what you're doing, not the kernel-dev package.
I don't think anyone can properly answer that last question here. You are using a non-standard install method: we can't know how to interact with it...
That said, take a look at what meta/classes/module.bbclass does. It sets several related variables for make: KERNEL_SRC=${STAGING_KERNEL_DIR}, KERNEL_PATH=${STAGING_KERNEL_DIR}, O=${STAGING_KERNEL_BUILDDIR}. Maybe your installer supports some of these environment variables and you could set them in your recipe?
I am doing the build local of Bison(Linux), to provide it to other team to use.
I need to download its source from homepage and build it local, then install etc... but problem is that, after we build it(its lib/bin ..), the user of it need to use it at other pc(rather than the same host than us).
I notice that, at the build/install for Bison, we need to specify the path like datarootdir etc for the .configure, which provides an absolute path into the build and which used later in runtime for binary of Bison. (dir inside 'Share' for instance).
But since this path in build we specified would be different from the people(user)'s host's real dir. (the lib/bin are rsync later to other ppl's pc) Then this path of my local would not work for them.
My question is that, is it possible to specify a relatif path while compile/install Bison,(for example relatif to Bison binary etc). Or while using the binary of Bison, is it possible to customize the datadir etc for it?
So this could be more flexible at the user side later? if else we have to provide the same dir structure exact the runtime onw as the built one.
Thanks folks!
You can override the data path with the following:
BISON_PKGDATADIR=/some/other/path/share/bison
I've encountered a scenario where I'm building a Perl module as part of another Build system on a Windows machine. I use the --install_base option of Module::Build to specify a temporary directory to put module files until the overall build system can use them. Unfortunately, that other Build system has a problem if any of its files that it depends on are read only - it tries to delete any generated files before rebuilding them, and it can't clean any read-only files (it tries to delete it, and it's read only, which gives an error.) By default, Module::Build installs its libraries with the read-only bit enabled.
One option would be to make a new step in the build process that removes the read-only bit from the installed files, but due to the nature of the build tool that will require a second temporary directory...ugh.
Is it possible to configure a Module::Build based installer to NOT enable that read-only bit when the files are installed to the --install_base directory? If so, how?
No, it's not a configurable option. It's done in the copy_if_modified method in Module::Build::Base:
# mode is read-only + (executable if source is executable)
my $mode = oct(444) | ( $self->is_executable($file) ? oct(111) : 0 );
chmod( $mode, $to_path );
If you controlled the Build.PL, you could subclass Module::Build and override copy_if_modified to call the base class and then chmod the file writable. But I get the impression you're just trying to install someone else's module.
Probably the easiest thing to do would be to install a copy of Module::Build in a private directory, then edit it to use oct(666) (or whatever mode you want). Then invoke perl -I /path/to/customized/Module/Build Build.PL. Or, (as you said) just use the standard Module::Build and add a separate step to mark everything writable afterwards.
Update: ysth is right; it's ExtUtils::Install that actually does the final copy. copy_if_modified is for populating blib. But ExtUtils::Install also hardcodes the mode to read-only. You could use a customized version of ExtUtils::Install, but it's probably easier to just have a separate step.