I'm facing a typical Microsoft bug whereby I am unable to install Windows Azure Active Directory Module Found here Windows Azure AD for Powershell
Background:
I am Running Windows 7 with Service Pack 1.
Powershell 4.0 is currently installed.
Microsoft.Net Framework 3.5.1 is checked under programs and Features
Microsoft Online Services Sign-in Assistant Both Beta and non Beta versions were installed..PC rebooted and no luck with either of them.
I have read many posts online and none of them appeared to have helped.
Does anyone know how to overcome this annoying bug.
http://blogs.technet.com/b/tune_in_to_windows_intune/archive/2013/11/09/error-when-trying-to-install-windows-azure-active-directory-module-for-windows-powershell.aspx
http://social.msdn.microsoft.com/Forums/windowsazure/en-US/aef5669a-bc46-4c7a-9cbd-d0ed781e5190/waad-wont-install-says-signin-assistant-needs-to-be-installed-but-it-already-is?forum=WindowsAzureAD
I finally found a solution to this from Erik who posted on this site.
http://blogs.technet.com/b/tune_in_to_windows_intune/archive/2013/11/09/error-when-trying-to-install-windows-azure-active-directory-module-for-windows-powershell.aspx
Run the command prompt as an administrator by holding shift + right click on the command prompt icon, then Run as administrator.
At the command prompt
Change directories to where you AdministrationConfig-En.msi is installed.
In the command prompt type: msiexec /i AdministrationConfig-EN.msi
It will now install without the powershell warning.
Erik's commentary is that the powershell settings are only readable when privileges are elevated.
The beta version of the sign-in assistant which also needs to be installed prior to the Administrationconfig didn't help me but have helped others.
It was definitely a long and painful process.
There is a new beta version for the sign in assistant. Look up the new beta version and it will work. Just went through this about a week ago.
A String Value is "missing" in the registry. There are two potential locations in the Windows registry where PowerShell versions are stored, depending on what version or versions you have installed or possibly installed in the past.
Older version location, including Version 1.0 and 2.0:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\1
Later versions location, including 5.0 and others:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\PowerShell\3
Each location has a sub-key called PowerShellEngine that contains a string value called PowerShellVersion.
If this value is missing in the first key mentioned above, you will receive the installation error because the installer does not look the in the second key mentioned above for the PS version.
If the value is missing, simply add it with the data of 2.0
Now installation of the AADRM will work assuming you have PS 2.0 or later installed and assuming you are using the installer version 2.50 or later of the AADRM, which does not require the sign-in assistant to be installed.
Related
Attempting to launch the SQL Server Management Studio set-up exe leads to an icon briefly appearing in the taskbar, before disappearing without any further screen showing up. The task manager does not show any running instance for the installer either.
I have tried various versions of the SSMS installer executables posted on Microsoft's official documentation for SSMS, including version 18.8, 18.7.1, and 17.9.1.
Also tried updating the .NET framework, as suggested here (Why the SSMS-setup-ENU for version 17.8.1 isn't running?), but the latest version is already showed as having been installed.
I did a soft and hard reboot both, without success.
Confused as to how to proceed and install the software now. Any help would be appreciated.
I have installed the Google Cloud SDK in Windows 7 as instructed in the Google Cloud SDK document. And its installed in C:\Program Files\Google\Cloud SDK.
But I haven't seen any option to completely uninstall this SDK in windows control panel.
On the latest SDK, Under "C:\Program Files (x86)\Google\Cloud SDK" you should find an uninstaller (uninstaller.exe). Just execute it.
I have also been struggling with this.
As far as I can tell, the Google App Engine SDK Windows installer installs a whole bunch of binaries into C:\Program Files\Google\Cloud SDK, installs Python 2 (2.7.6 as of this post's writing), creates a CLOUDSDK_PYTHON environment variable, and updates your PATH variable to reference the Python and Cloud SDK locations.
The Cloud SDK Core Command Line Tools (gcloud) can assist you with removing most of the binaries. It's been suggested elsewhere that these binaries can just be deleted, but I uninstalled them one-by-one, just to be safe. To do this (taken from L.H's post here), launch the Google Cloud SDK Shell from your Start menu, and run gcloud components list to see all the SDK components. Each can be removed by running gcloud components remove [COMPONENT_ID]. I removed all of the Individual Components before removing the Cloud SDK Core Command Line Tools Package.
Python includes an actual Windows uninstaller with its installation, you you can just remove it as normal via Add/Remove Programs.
Then, you can just Remove the Google Cloud SDK-related Environment Variables and the references in your PATH variable.
To get Cloud SDK Uninstalled manually on WINDOWS(7 for me) :
Delete following two folders from your windows machine:
Cloud SDK Installation folder
* mostly found at standard installation folder- C:\Program Files (x86)\Google *
or custom location if you chose one during installation
Cloud SDK configuration folder in case you configured it after installation
* Default location is user-level AppData\Roaming\gcloud *
C:\Users{USERNAME}\AppData\Roaming\gcloud
Apart from this, I found entry of (Google) Cloud SDK in CONTROL PANEL-->Uninstall Programs too. Use this option to uninstall as well. It may throw alert if already deleted.
Last but not least:
Check your system environment variable "PATH". Remove any path that points to Cloud SDK locations.
Hope this would help windows user :)
I'm trying to install Visual Studio 2005 on a Windows 7 box but am repeatedly getting the same error. When I run the installer it starts to run then pops up with a message saying:
"A problem has been encountered while loading the setup components. Canceling setup."
Various suggestions has said that maybe the install is corrupted so I downloaded a fresh copy of the ISO from MSDN today, same issue. Another suggestion is that installing from the ISO may be the issue so I extracted the contents of the ISO to a folder on my HDD, same issue. I have also tried running the files as administrator and in XP compatability mode, same issue.
Searching for this issue the most common responses I've found have been about installing SP1, however I cannot get the base product to install and therefore cannot apply SP1.
Does anyone have any further suggestions as to what I can do to fix this issue and get VS2005 installed? If anyone wants any log files of any variety I am happy to supply so long as you tell me where to look as I'm not sure.
As for why I am using VS2005 and not a newer product, it is required for the ongoing support and maintenance of some older applications we manage. These cannot be easily migrated to a newer version of Visual Studio without some considerable investment of time and that would probably be longer than the time it will take to develop newer, replacement applications (which is currently in progress). Until the new applications are available though we need to maintain an environment to use.
Did you try running setup.exe in compatibility mode with Windows XP? Some discussion here on how to do this.
Another alternative since you alluded to having an MSDN subscription. Download Windows XP and install it into a VM. (If HyperV isn't already in installed with your Win7, you can add it from Control Panel->Programs&Features->Turn Windows Features on/off). Then install VS2005 from there.
We have an installer package authored with InstallShield 2009, targeting Windows Installer 3.1.
Recently, we started to notice that sometime, when installing on some Windows 2003 R2 x86 based hosts, the installation fails, and the installer log report a 1603 error code (which by the way, doesn't really help much, as it means ERROR_INSTALL_FAILURE, that is a very generic "A fatal error occurred during installation.").
As the installation is still working on some other hosts on that very same platform, after further investigation we found out it was happening on hosts where Sql Server 2008 R2 was already installed, which leaded us to find out the issue is really with Windows Installer 4.5.
Whenever Windows Installer 4.5 was installed by an installer package, our installer package is failing with 1603. So far, we found as a work around: if we manually uninstall Windows Installer 4.5 (running something like "C:\WINDOWS\$NtUninstallKB942288-v4$\spuninst\spuninst.exe"), we can then run our installer package successfully, but this has various drawbacks:
the user who uninstall Windows Installer 4.5 is prompted with a dialog listing all the various software products installed using that, and effectively the link between those products and Windows Installer 4.5 is lost after uninstalling that, even if we reinstall it after successfully installing our application;
as Microsoft released various version of Windows Installer 4.5, the location of the utility to uninstall that is not strictly the one given above;
It is awkward to ask customers to perform such a work around.
I suppose upgrading the installer package to target Windows Installer 5 may solve the issue, but if possibile I would like to avoid it, and continuing to use InstallShield 2009 to author this specific package.
I have scoured the Microsoft and Flexera Knowledge Bases (and I am continuing my investigation), with no avail so far.
Does anyone knows if Microsoft or Flexera, or any other third party, have published an hotfix, or some further info, about this issue?
Some info about the 1603 error code failure
We got verbose logs for this issue, from at least 3 different servers, and we have investigated that in depth, to not avail so far. Most actions return 1, some 0 (specifically IsolateComponents, MigrateFeatureStates, IsolateComponents, SetODBCFolders, MigrateFeatureStates, UnpublishComponents, UnregisterComPlus, UnregisterTypeLibraries, UnregisterMIMEInfo, RemoveShortcuts, RemoveFiles, CreateShortcuts, RegisterMIMEInfo, InstallODBC, RegisterTypeLibraries, RegisterComPlus and PublishComponents, but nothing has yet came out investigating those), the installer package seems actually to be almost able to install (perform all the sequence down to "INSTALL. Return value 1.", it even prints "Product: [Our Product] -- Installation operation completed successfully."), only then it starts to rollback everything, and as there are various errors on the rollback, I think some of those will cause the 1603 (probably some 1607 returned by MsiProvideAssembly on ISChainPackagesCleanup), but the point is that it shouldn't rollback, and with Windows Installer 3.1 (or 5.x for that matter) it doesn't, it does rollback only when there is Windows Installer 4.5 installed on a Windows 2003 x86 environment.
Most likely your package has an action which fails, either custom or standard. Try creating a verbose log of the installation which fails (it's very important to be verbose). After the failure, open the log with a text editor and search for the error code (1603) to see what triggers it.
As a side note, don't try to blame Windows Installer. There's nothing wrong with version 4.5 and there are no hotfixes or something like that. The problem is in your package. It does something which is either incorrect or unsupported.
EDIT:
From your post update it looks like a failed chained installation. No errors are shown in the log because the error occurs in a different installer process.
If you are not using chained packages, try looking for errors in the Event Viewer.
If you are using chained packages, you can try enabling the Windows Installer logging policy and check for logs generated by them. Most likely one of the packages is encountering a problem.
I'm having a problem on my TeamCity CI build server where during compilation I get the following error:
C:\WINDOWS\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets(2342, 9): error MSB3086: Task could not find "AL.exe" using the SdkToolsPath "" or the registry key "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SDKs\Windows\v7.0A". Make sure the SdkToolsPath is set and the tool exists in the correct processor specific location under the SdkToolsPath and that the Microsoft Windows SDK is installed
I've found similar reports from a year ago when people were upgrading to .NET 3.5, for example this one. In that case, installing the latest SDK solved the issue, however I have already installed the latest SDK (Microsoft Windows SDK for Windows 7 and .NET Framework 4) on my build server. The MSBuild tools are all there on the server, in a folder called
C:\WINDOWS\Microsoft.NET\Framework\v4.0.30319
and AL.exe exists in
C:\Program Files\Microsoft SDKs\Windows\v7.1\Bin\NETFX 4.0 Tools
However the registry key mentioned in the error message does not exist. So, it seems like there is something wrong with the installation/configuration of MSBuild. This error only happens for projects that have embedded resources, which require AL.exe.
As you have install the latest SDK (I'm assuming that's v7.1)
Go to "Microsoft Windows SDK v7.1" from the Start menu
Select "Windows SDK 7.1 Command Prompt" and enter
cd Setup
WindowsSdkVer -version:v7.1
This will tell msbuild to use that version of the tools without needing to do any scary registry editing.
Even though the question is quite old but it still appears in the top of google search results so I decided to post my solution as well. I have trapped into same issue while during TeamCity setup on Windows Server 2016 and Windows 10 Pro.
I have installed Microsoft Build Tools 2015 and Windows 10 SDK (Only tools for .NET 4.6.2) and got the error from question.
The missing puzzle was to set environment variable: TargetFrameworkSDKToolsDirectory=C:\Program Files (x86)\Microsoft SDKs\Windows\v10.0A\bin\NETFX 4.6.2 Tools.
After setting environment variable MSBuild was able to resolve all needed tools including AL.exe and build succeeded.
Please let me know if same can be achieved by setting values in registry, but otherwise environment variables also works very well in this case and no installation of VS is needed.
You also need to apply the following registry fix to update msbuild to point to the V7.1 sdk values.
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSBuild\ToolsVersions\4.0]
"MSBuildToolsPath"="C:\\WINDOWS\\Microsoft.NET\\Framework\\v4.0.30319\\"
"MSBuildToolsRoot"="C:\\WINDOWS\\Microsoft.NET\\Framework\\"
"FrameworkSDKRoot"="$(Registry:HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Microsoft SDKs\\Windows\\v7.1#InstallationFolder)"
"MSBuildRuntimeVersion"="4.0.30319"
"SDK40ToolsPath"="$(Registry:HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Microsoft SDKs\\Windows\\v7.1\\WinSDK-NetFx40Tools-x86#InstallationFolder)"
"SDK35ToolsPath"="$(Registry:HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\Microsoft SDKs\\Windows\\v7.1\\WinSDKNetFx35Tools#InstallationFolder)"
"MSBuildToolsPath32"="$(Registry:HKEY_LOCAL_MACHINE\\SOFTWARE\\Microsoft\\MSBuild\\ToolsVersions\\4.0#MSBuildToolsPath)"
I had the same problem there, here's my simple answer to this.
After you have installed the Microsoft Windows SDK 7.1 on the TeamCity Server.
In Regedit Change this key
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\MSBuild\ToolsVersions\4.0\SDK40ToolsPath
to
$(Registry:HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SDKs\Windows\v7.1\WinSDK-NetFx40Tools-x86#InstallationFolder)
Follow the below steps. This worked perfectly to me. Saved my time.
1- Right-click the My Computer icon and choose Properties, or in Windows Control Panel, choose System.
2- Choose Advanced system settings.
3- On the Advanced tab, click Environment Variables.
4- Click New to create a new environment variable under User variable section.
5- Variable name: TargetFrameworkSDKToolsDirectory
6- Variable value: TargetFrameworkSDKToolsDirectory=C:\Program Files (x86)\Microsoft SDKs\Windows\v10.0A\bin\NETFX 4.6.2 Tools
Variable value depends on your SDK installation path.
7- Click OK and Save all windows.
8- Restart Visual Studio.
I have a simple, effective fix.
The problem seems to be that the tools version delivered with Visual Studio is version 7.0A, while the version delivered with the Windows SDK is version 7.1. That's all very well, but MSBuild.exe is still looking for the version 7.0A registry keys, which don't exist. This has to be a bug!
Looking in my registry, all the information for V6.0 and V7.1 is present and correct. So my solution is simple. I created a registry link that makes an alias of the 7.1 keys.
It's not possible to create registry links using the built-in tools, so I downloaded a little utility called 'regln' from here.
C:>regln-x86.exe "\Registry\Machine\SOFTWARE\Microsoft\Microsoft SDKs\Windows\v7.0A" "\Registry
\Machine\SOFTWARE\Microsoft\Microsoft SDKs\Windows\v7.1"
Job done. MSBuild now works perfectly on the TeamCity server.
Add a system env variable TargetFrameworkSDKToolsDirectory
like this:
TargetFrameworkSDKToolsDirectory=C:\Program Files (x86)\Microsoft SDKs\Windows\v10.0A\bin\NETFX 4.6.2 Tools
restart VS
Ran into the same issue setting up a new build server on Windows 10.
Found and installed the latest (at the time) Microsoft Windows SDK for Windows 7 and .NET Framework 4 and that solved the problem.
We recently had this problem trying to get our .Net 4.0 builds working. We found that the location of al.exe had changed between where the original MSBuild that came with .Net 4.0 looks, and the Visual Studio SDK for .Net 4.0 (which was released later).
Since the only standalone installation of the SDK tools available is the one we had already installed without success (the one you mentioned), the only solution we could think of was to install Visual Studio on the build agents. We put Visual Studio 2010 Express (to keep the installation as lightweight as possible) on there and the problem went away. Not a pretty solution, but it did work - installing VS2010 also installs the SDK tools of the specific version that MSBuild appears to be looking for.
This is a problem that really shouldn't happen, but there didn't seem to be a way of making MSBuild look in the correct place for the tools, even hacking around in the registry.