I wrote the following bash script named /home/pi/test.sh (that uses the ruby gem "tumblr-rb"):
#!/bin/bash
echo "starting script"
/usr/local/bin/tumblr post /home/pi/test.jpg --host=myhost.tumblr.com --credentials=/home/pi/.tumblr
echo "end of script"
If I run it from the command line, I get:
starting script
Post was successfully created! Post ID: 82238814640
end of script
And my picture gets posted to Tumblr. Then if I put the bash script in my pi user's crontab with * * * * * /home/pi/test.sh, I get the following cron output e-mailed to me:
starting script
end of script
And nothing gets posted to Tumblr. Why does nothing happen?
Cron passes a minimal set of environment variables to your jobs.
You can use a simple shell to check the environment crontab provided:
* * * * * env > /home/pi/cron_env.dat
Try to add the full path of your ruby binary to execute the ruby script.
You can also set the PATH variable in the crontab file, which will apply to all cron jobs. e.g.
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
* * * * * bash -c /home/pi/test.sh
Related
I'm trying to get cron to call in the correct PATHs. When I run a Python script from shell the script runs fine as it uses the PATHs set in bashrc but when I use cron all the PATHs are not used from bashrc. Is there a file I can enter the PATHs into for cron like bashrc or a way to call the PATHs from bashrc?
Sorry I don't think I worded this correctly, I can get the correct script to run (meaning the PATH to the script in crontab is not the problem here), it's just when that script is running I run a build and this uses the PATHs set in .bashrc. When I run the script when I'm logged in, the .bashrc PATHs are pulled in. Since cron doesn't run in a shell per say it does not pull in .bashrc. Is there a way of pulling this in without having to write a bash script wrapper?
I used /etc/crontab. I used vi and entered in the PATHs I needed into this file and ran it as root. The normal crontab overwrites PATHs that you have set up. A good tutorial on how to do this.
The systemwide cron file looks like this:
This has the username field, as used by /etc/crontab.
# /etc/crontab: system-wide crontab
# Unlike any other crontab you don't have to run the `crontab'
# command to install the new version when you edit this file.
# This file also has a username field, that none of the other crontabs do.
SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
# m h dom mon dow user command
42 6 * * * root run-parts --report /etc/cron.daily
47 6 * * 7 root run-parts --report /etc/cron.weekly
52 6 1 * * root run-parts --report /etc/cron.monthly
01 01 * * 1-5 root python /path/to/file.py
Most likely, cron is running in a very sparse environment. Check the environment variables cron is using by appending a dummy job which dumps env to a file like this:
* * * * * env > env_dump.txt
Compare that with the output of env in a normal shell session.
You can prepend your own environment variables to the local crontab by defining them at the top of your crontab.
Here's a quick fix to prepend $PATH to the current crontab:
# echo PATH=$PATH > tmp.cron
# echo >> tmp.cron
# crontab -l >> tmp.cron
# crontab tmp.cron
The resulting crontab will look similar to chrissygormley's answer, with PATH defined before the crontab rules.
You should put full paths in your crontab. That's the safest option.
If you don't want to do that you can put a wrapper script around your programs, and set the PATH in there.
e.g.
01 01 * * * command
becomes:
01 01 * * * /full/path/to/command
Also anything called from cron should be be very careful about the programs it runs, and probably set its own choice for the PATH variable.
EDIT:
If you don't know where the command is that you want execute which <command> from your shell and it'll tell you the path.
EDIT2:
So once your program is running, the first thing it should do is set PATH and any other required variable (e.g. LD_LIBRARY_PATH) to the values that are required for the script to run.
Basically instead of thinking how to modify the cron environment to make it more suitable for your program/script - make your script handle the environment it's given, by setting an appropriate one when it starts.
Adding a PATH definition into the user crontab with correct values will help...
I've filled mine with this line on top (after comments, and before cron jobs):
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
And it's enough to get all my scripts working... Include any custom path there if you need to.
Setting PATH right before the command line in my crontab worked for me:
* * * * * PATH=$PATH:/usr/local/bin:/path/to/some/thing
Make your variables work for you, this will allow access t
Define your PATH in /etc/profile.d/*.sh
System-wide environment variables
Files with the .sh extension in the /etc/profile.d directory get executed whenever a bash login shell is entered (e.g. when logging in from the console or over ssh), as well as by the DisplayManager when the desktop session loads.
You can for instance create the file /etc/profile.d/myenvvars.sh and set variables like this:
export JAVA_HOME=/usr/lib/jvm/jdk1.7.0
export PATH=$PATH:$JAVA_HOME/bin
Execute crontab with login option!
CRONTAB run script or command with Environment Variables
0 9 * * * cd /var/www/vhosts/foo/crons/; bash -l -c 'php -f ./download.php'
0 9 * * * cd /var/www/vhosts/foo/crons/; bash -l -c download.sh
Problem
Your script works when you run it from the console but fails in cron.
Cause
Your crontab doesn't have the right path variables (and possibly shell)
Solution
Add your current shell and path the crontab
Script to do it for you
#!/bin/bash
#
# Date: August 22, 2013
# Author: Steve Stonebraker
# File: add_current_shell_and_path_to_crontab.sh
# Description: Add current user's shell and path to crontab
# Source: http://brakertech.com/add-current-path-to-crontab
# Github: hhttps://github.com/ssstonebraker/braker-scripts/blob/master/working-scripts/add_current_shell_and_path_to_crontab.sh
# function that is called when the script exits (cleans up our tmp.cron file)
function finish { [ -e "tmp.cron" ] && rm tmp.cron; }
#whenver the script exits call the function "finish"
trap finish EXIT
########################################
# pretty printing functions
function print_status { echo -e "\x1B[01;34m[*]\x1B[0m $1"; }
function print_good { echo -e "\x1B[01;32m[*]\x1B[0m $1"; }
function print_error { echo -e "\x1B[01;31m[*]\x1B[0m $1"; }
function print_notification { echo -e "\x1B[01;33m[*]\x1B[0m $1"; }
function printline {
hr=-------------------------------------------------------------------------------------------------------------------------------
printf '%s\n' "${hr:0:${COLUMNS:-$(tput cols)}}"
}
####################################
# print message and exit program
function die { print_error "$1"; exit 1; }
####################################
# user must have at least one job in their crontab
function require_gt1_user_crontab_job {
crontab -l &> /dev/null
[ $? -ne 0 ] && die "Script requires you have at least one user crontab job!"
}
####################################
# Add current shell and path to user's crontab
function add_shell_path_to_crontab {
#print info about what's being added
print_notification "Current SHELL: ${SHELL}"
print_notification "Current PATH: ${PATH}"
#Add current shell and path to crontab
print_status "Adding current SHELL and PATH to crontab \nold crontab:"
printline; crontab -l; printline
#keep old comments but start new crontab file
crontab -l | grep "^#" > tmp.cron
#Add our current shell and path to the new crontab file
echo -e "SHELL=${SHELL}\nPATH=${PATH}\n" >> tmp.cron
#Add old crontab entries but ignore comments or any shell or path statements
crontab -l | grep -v "^#" | grep -v "SHELL" | grep -v "PATH" >> tmp.cron
#load up the new crontab we just created
crontab tmp.cron
#Display new crontab
print_good "New crontab:"
printline; crontab -l; printline
}
require_gt1_user_crontab_job
add_shell_path_to_crontab
Source
https://github.com/ssstonebraker/braker-scripts/blob/master/working-scripts/add_current_shell_and_path_to_crontab.sh
Sample Output
The simplest workaround I've found looks like this:
* * * * * root su -l -c command
This example invokes su as root user and starts the shell with the user's full environment, including $PATH, set as if they were logged in. It works the same on different distros, is more reliable than sourcing .bashrc (which hasn't worked for me) and avoids hardcoding specific paths which can be a problem if you're providing an example or setup tool and don't know what distro or file layout on the user's system.
You can also specify the username after su if you want a different user than root, but you should probably leave the root parameter before su command since this ensures su has sufficient privileges to switch to any user you specify.
The default environment for cron jobs is very sparse and may be very different from the environment you develop your python scripts in. For a script that might be run in cron, any environment that you depend on should be set explicitly. In the cron file itself, include full paths to python executables and to your python scripts.
On my AIX cron picks up it's environmental variables from /etc/environment ignoring what is set in the .profile.
Edit: I also checked out a couple of Linux boxes of various ages and these appear to have this file as well, so this is likely not AIX specific.
I checked this using joemaller's cron suggestion and checking the output before and after editing the PATH variable in /etc/environment.
If you don't want to have to make the same edits in various places, then roughly do this:
* * * * * . /home/username/.bashrc && yourcommand all of your args
The . space and then the path to .bashrc and the && command are the magic there to get your environment changes into the running bash shell. Too, if you really want the shell to be bash, it is a good idea to have a line in your crontab:
SHELL=/bin/bash
Hope it helps someone!
#Trevino: your answer helped me solve my problem. However, for a beginner, trying to give a step by step approach.
Get your current installation of java via $ echo $JAVA_HOME
$ crontab -e
* * * * * echo $PATH - this lets you understand whats the PATH value being used by crontab at present. Run crontab and grab $PATH value used by crontab.
Now edit crontab again to set your desired java bin path: a) crontab -e; b) PATH=<value of $JAVA_HOME>/bin:/usr/bin:/bin (its a sample path); c) now your scheduled job/script like */10 * * * * sh runMyJob.sh &; d) remove echo $PATH from crontab as its not needed now.
Set the required PATH in your cron
crontab -e
Edit: Press i
PATH=/usr/local/bin:/usr/local/:or_whatever
10 * * * * your_command
Save and exit :wq
I know this has been answered already, but I thought that his would be useful to some. I had a similar issue that I recently solved (found here) and here are the highlights of the steps I took to answer this question:
make sure that you have the variables you need in PYTHONPATH (found here and here and for more info here) inside the .profile or .bash_profile for any shell you want to test your script in to make sure it works.
edit your crontab to include the directories needed to run your script in a cron job (found here and here)
a) be sure to include the root directory in the PATH variable (.) as explained here (basically if you are running an executable with your command it needs to be able to find root or the directory where the executable is stored) and probably these (/sbin:/bin:/usr/sbin:/usr/bin)
in your crontab file, create a cronjob that will change directory to the directory where you have successfully ran the script before (i.e. Users/user/Documents/foo)
a) This will look like the following:
* * * * cd /Users/user/Documents/foo; bar -l doSomething -v
Should you use webmin then these are the steps how to set the PATH value:
System
-> Scheduled Cron Jobs
-> Create a new environment variable
-> For user: <Select the user name>
-> Variable name: PATH
-> Value: /usr/bin:/bin:<your personal path>
-> Add environment variable: Before all Cron jobs for user
I'm trying to get cron to call in the correct PATHs. When I run a Python script from shell the script runs fine as it uses the PATHs set in bashrc but when I use cron all the PATHs are not used from bashrc. Is there a file I can enter the PATHs into for cron like bashrc or a way to call the PATHs from bashrc?
Sorry I don't think I worded this correctly, I can get the correct script to run (meaning the PATH to the script in crontab is not the problem here), it's just when that script is running I run a build and this uses the PATHs set in .bashrc. When I run the script when I'm logged in, the .bashrc PATHs are pulled in. Since cron doesn't run in a shell per say it does not pull in .bashrc. Is there a way of pulling this in without having to write a bash script wrapper?
I used /etc/crontab. I used vi and entered in the PATHs I needed into this file and ran it as root. The normal crontab overwrites PATHs that you have set up. A good tutorial on how to do this.
The systemwide cron file looks like this:
This has the username field, as used by /etc/crontab.
# /etc/crontab: system-wide crontab
# Unlike any other crontab you don't have to run the `crontab'
# command to install the new version when you edit this file.
# This file also has a username field, that none of the other crontabs do.
SHELL=/bin/sh
PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin
# m h dom mon dow user command
42 6 * * * root run-parts --report /etc/cron.daily
47 6 * * 7 root run-parts --report /etc/cron.weekly
52 6 1 * * root run-parts --report /etc/cron.monthly
01 01 * * 1-5 root python /path/to/file.py
Most likely, cron is running in a very sparse environment. Check the environment variables cron is using by appending a dummy job which dumps env to a file like this:
* * * * * env > env_dump.txt
Compare that with the output of env in a normal shell session.
You can prepend your own environment variables to the local crontab by defining them at the top of your crontab.
Here's a quick fix to prepend $PATH to the current crontab:
# echo PATH=$PATH > tmp.cron
# echo >> tmp.cron
# crontab -l >> tmp.cron
# crontab tmp.cron
The resulting crontab will look similar to chrissygormley's answer, with PATH defined before the crontab rules.
You should put full paths in your crontab. That's the safest option.
If you don't want to do that you can put a wrapper script around your programs, and set the PATH in there.
e.g.
01 01 * * * command
becomes:
01 01 * * * /full/path/to/command
Also anything called from cron should be be very careful about the programs it runs, and probably set its own choice for the PATH variable.
EDIT:
If you don't know where the command is that you want execute which <command> from your shell and it'll tell you the path.
EDIT2:
So once your program is running, the first thing it should do is set PATH and any other required variable (e.g. LD_LIBRARY_PATH) to the values that are required for the script to run.
Basically instead of thinking how to modify the cron environment to make it more suitable for your program/script - make your script handle the environment it's given, by setting an appropriate one when it starts.
Adding a PATH definition into the user crontab with correct values will help...
I've filled mine with this line on top (after comments, and before cron jobs):
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
And it's enough to get all my scripts working... Include any custom path there if you need to.
Setting PATH right before the command line in my crontab worked for me:
* * * * * PATH=$PATH:/usr/local/bin:/path/to/some/thing
Make your variables work for you, this will allow access t
Define your PATH in /etc/profile.d/*.sh
System-wide environment variables
Files with the .sh extension in the /etc/profile.d directory get executed whenever a bash login shell is entered (e.g. when logging in from the console or over ssh), as well as by the DisplayManager when the desktop session loads.
You can for instance create the file /etc/profile.d/myenvvars.sh and set variables like this:
export JAVA_HOME=/usr/lib/jvm/jdk1.7.0
export PATH=$PATH:$JAVA_HOME/bin
Execute crontab with login option!
CRONTAB run script or command with Environment Variables
0 9 * * * cd /var/www/vhosts/foo/crons/; bash -l -c 'php -f ./download.php'
0 9 * * * cd /var/www/vhosts/foo/crons/; bash -l -c download.sh
Problem
Your script works when you run it from the console but fails in cron.
Cause
Your crontab doesn't have the right path variables (and possibly shell)
Solution
Add your current shell and path the crontab
Script to do it for you
#!/bin/bash
#
# Date: August 22, 2013
# Author: Steve Stonebraker
# File: add_current_shell_and_path_to_crontab.sh
# Description: Add current user's shell and path to crontab
# Source: http://brakertech.com/add-current-path-to-crontab
# Github: hhttps://github.com/ssstonebraker/braker-scripts/blob/master/working-scripts/add_current_shell_and_path_to_crontab.sh
# function that is called when the script exits (cleans up our tmp.cron file)
function finish { [ -e "tmp.cron" ] && rm tmp.cron; }
#whenver the script exits call the function "finish"
trap finish EXIT
########################################
# pretty printing functions
function print_status { echo -e "\x1B[01;34m[*]\x1B[0m $1"; }
function print_good { echo -e "\x1B[01;32m[*]\x1B[0m $1"; }
function print_error { echo -e "\x1B[01;31m[*]\x1B[0m $1"; }
function print_notification { echo -e "\x1B[01;33m[*]\x1B[0m $1"; }
function printline {
hr=-------------------------------------------------------------------------------------------------------------------------------
printf '%s\n' "${hr:0:${COLUMNS:-$(tput cols)}}"
}
####################################
# print message and exit program
function die { print_error "$1"; exit 1; }
####################################
# user must have at least one job in their crontab
function require_gt1_user_crontab_job {
crontab -l &> /dev/null
[ $? -ne 0 ] && die "Script requires you have at least one user crontab job!"
}
####################################
# Add current shell and path to user's crontab
function add_shell_path_to_crontab {
#print info about what's being added
print_notification "Current SHELL: ${SHELL}"
print_notification "Current PATH: ${PATH}"
#Add current shell and path to crontab
print_status "Adding current SHELL and PATH to crontab \nold crontab:"
printline; crontab -l; printline
#keep old comments but start new crontab file
crontab -l | grep "^#" > tmp.cron
#Add our current shell and path to the new crontab file
echo -e "SHELL=${SHELL}\nPATH=${PATH}\n" >> tmp.cron
#Add old crontab entries but ignore comments or any shell or path statements
crontab -l | grep -v "^#" | grep -v "SHELL" | grep -v "PATH" >> tmp.cron
#load up the new crontab we just created
crontab tmp.cron
#Display new crontab
print_good "New crontab:"
printline; crontab -l; printline
}
require_gt1_user_crontab_job
add_shell_path_to_crontab
Source
https://github.com/ssstonebraker/braker-scripts/blob/master/working-scripts/add_current_shell_and_path_to_crontab.sh
Sample Output
The simplest workaround I've found looks like this:
* * * * * root su -l -c command
This example invokes su as root user and starts the shell with the user's full environment, including $PATH, set as if they were logged in. It works the same on different distros, is more reliable than sourcing .bashrc (which hasn't worked for me) and avoids hardcoding specific paths which can be a problem if you're providing an example or setup tool and don't know what distro or file layout on the user's system.
You can also specify the username after su if you want a different user than root, but you should probably leave the root parameter before su command since this ensures su has sufficient privileges to switch to any user you specify.
The default environment for cron jobs is very sparse and may be very different from the environment you develop your python scripts in. For a script that might be run in cron, any environment that you depend on should be set explicitly. In the cron file itself, include full paths to python executables and to your python scripts.
On my AIX cron picks up it's environmental variables from /etc/environment ignoring what is set in the .profile.
Edit: I also checked out a couple of Linux boxes of various ages and these appear to have this file as well, so this is likely not AIX specific.
I checked this using joemaller's cron suggestion and checking the output before and after editing the PATH variable in /etc/environment.
If you don't want to have to make the same edits in various places, then roughly do this:
* * * * * . /home/username/.bashrc && yourcommand all of your args
The . space and then the path to .bashrc and the && command are the magic there to get your environment changes into the running bash shell. Too, if you really want the shell to be bash, it is a good idea to have a line in your crontab:
SHELL=/bin/bash
Hope it helps someone!
#Trevino: your answer helped me solve my problem. However, for a beginner, trying to give a step by step approach.
Get your current installation of java via $ echo $JAVA_HOME
$ crontab -e
* * * * * echo $PATH - this lets you understand whats the PATH value being used by crontab at present. Run crontab and grab $PATH value used by crontab.
Now edit crontab again to set your desired java bin path: a) crontab -e; b) PATH=<value of $JAVA_HOME>/bin:/usr/bin:/bin (its a sample path); c) now your scheduled job/script like */10 * * * * sh runMyJob.sh &; d) remove echo $PATH from crontab as its not needed now.
Set the required PATH in your cron
crontab -e
Edit: Press i
PATH=/usr/local/bin:/usr/local/:or_whatever
10 * * * * your_command
Save and exit :wq
I know this has been answered already, but I thought that his would be useful to some. I had a similar issue that I recently solved (found here) and here are the highlights of the steps I took to answer this question:
make sure that you have the variables you need in PYTHONPATH (found here and here and for more info here) inside the .profile or .bash_profile for any shell you want to test your script in to make sure it works.
edit your crontab to include the directories needed to run your script in a cron job (found here and here)
a) be sure to include the root directory in the PATH variable (.) as explained here (basically if you are running an executable with your command it needs to be able to find root or the directory where the executable is stored) and probably these (/sbin:/bin:/usr/sbin:/usr/bin)
in your crontab file, create a cronjob that will change directory to the directory where you have successfully ran the script before (i.e. Users/user/Documents/foo)
a) This will look like the following:
* * * * cd /Users/user/Documents/foo; bar -l doSomething -v
Should you use webmin then these are the steps how to set the PATH value:
System
-> Scheduled Cron Jobs
-> Create a new environment variable
-> For user: <Select the user name>
-> Variable name: PATH
-> Value: /usr/bin:/bin:<your personal path>
-> Add environment variable: Before all Cron jobs for user
I am having difficulty running the below simple script from crontab:
#!/bin/bash
notify-send "battery.sh working"
The permissions of the file are rwxr-xr-x and its running fine with either of the commands bash battery.sh and sh battery.sh.
In my crontab, I have tried running it with both bash and sh, with absolute as well as local path. My current crontab looks as follows:
* * * * * /home/marpangal/battery.sh
* * * * * sh battery.sh
* * * * * bash battery.sh
* * * * * sh /home/marpangal/battery.sh
* * * * * bash /home/marpangal/battery.sh
However the cron does not execute the script and I get no message from notify-send.
notify-send needs the DBUS_SESSION_BUS_ADDRESS environment variable in order to communicate with the current desktop session. Since cron runs with an almost empty environment, this variable is not available.
But you can set it directly in your battery.sh script:
export $(egrep -z DBUS_SESSION_BUS_ADDRESS /proc/$(pgrep -u $LOGNAME gnome-session)/environ)
notify-send "Message from cron"
This looks up the process id of your gnome-session and extracts the DBUS_SESSION_BUS_ADDRESS (along with its value) from then gnome-sessions' environment.
Now notify-send is able to display notifications in your desktop session.
Flopps’s answer gives me a -bash: warning: command substitution: ignored null byte in input – so i tried something different:
export DBUS_SESSION_BUS_ADDRESS=unix:path=/run/user/$(id -u)/bus
notify-send "Message from cron"
i assume this is not as flexible as the original export but it works for me in my user crontab.
I'm trying to execute a particular script located in /logann/myFile through crontab file.
I've already tried a lot of ways but no one makes any results.
I add in crontab file this line to call my script
26 10 * * * root cd /logann && ./apagar_temp_tomcat
(The time I change to test)
And my script is
#!/bin/sh
rm /tmp/tomcat7-tomcat7-tmp/*.tmp
rm /tmp/tomcat7-tomcat7-tmp/*.xml
I just want to execute this script. This script will delete every .tmp/.xml files in the folder tomcat7-tomcat7-tmp.
Any ideas?
Thank you guys!
cron jobs will run in their own shell. So you can't expect to see tedvs on your console.
Try to write something in file, for example
* * * * * echo tedvs > file_in_your_directory.txt
Just make one function in file and call that file or function in cron as per your time interval.
I did this in PHP
shell_exec(\'(crontab -l ; echo "* * * * * curl www-data http://localhost/sp/delete.php") | crontab -\');
I'm trying to qsub a script within crontab. Within a crontab txt file, I tried:
0 1 * * * qsub /script.sh
The error I get is "/bin/sh: qsub: command not found."
I've tried a bunch of similar iterations and looked around online without success. I'd appreciate any help.
Programs executed under cron run with a limited set of environment variables. In particular, since it doesn't read your shell startup files (.bashrc, .profile, .cshrc, whatever), it won't have your $PATH settings; $PATH is likely to be something simple like /usr/bin:/bin.
You can set the PATH for a single command like this:
0 1 * * * PATH=/directory/containing/qsub:/usr/bin:/bin qsub /script.sh
You can also set environment variables globally; such settings will apply to all commands executed from your crontab:
PATH=/directory/containing/qsub:/usr/bin:/bin
0 1 * * * qsub /script.sh
man 5 crontab, or see here, for more information on writing crontabs.
If you want to see just what the environment for a cron job looks like, you can temporarily add this line to your crontab:
* * * * * printenv > cron-env
Wait until the top of the next minute, then cat ~/cron-env -- and then remove that line from your crontab so it doesn't keep executing.
(Is your script really in the root directory? Why isn't it under your home directory?)
The method works for me is that I first source the sge.sh under /etc/profile.d/sge.sh
Then the crontab will get the correct environment variable and able to run the qsub under crontab.