I've started using Vim to develop Perl scripts and am starting to find it very powerful.
One thing I like is to be able to open multiple files at once with:
vi main.pl maintenance.pl
and then hop between them with:
:n
:prev
and see which file are open with:
:args
And to add a file, I can say:
:n test.pl
which I expect would then be added to my list of files, but instead it wipes out my current file list and when I type :args I only have test.pl open.
So how can I add and remove files in my args list?
Why not use tabs (introduced in Vim 7)?
You can switch between tabs with :tabn and :tabp,
With :tabe <filepath> you can add a new tab; and with a regular :q or :wq you close a tab.
If you map :tabn and :tabp to your F7/F8 keys you can easily switch between files.
If there are not that many files or you don't have Vim 7 you can also split your screen in multiple files: :sp <filepath>. Then you can switch between splitscreens with Ctrl+W and then an arrow key in the direction you want to move (or instead of arrow keys, w for next and W for previous splitscreen)
Listing
To see a list of current buffers, I use:
:ls
Opening
To open a new file, I use
:e ../myFile.pl
with enhanced tab completion (put set wildmenu in your .vimrc).
Note: you can also use :find which will search a set of paths for you, but you need to customize those paths first.
Switching
To switch between all open files, I use
:b myfile
with enhanced tab completion (still set wildmenu).
Note: :b# chooses the last visited file, so you can use it to switch quickly between two files.
Using windows
Ctrl-W s and Ctrl-W v to split the current window horizontally and vertically. You can also use :split and :vertical split (:sp and :vs)
Ctrl-W w to switch between open windows, and Ctrl-W h (or j or k or l) to navigate through open windows.
Ctrl-W c to close the current window, and Ctrl-W o to close all windows except the current one.
Starting vim with a -o or -O flag opens each file in its own split.
With all these I don't need tabs in Vim, and my fingers find my buffers, not my eyes.
Note: if you want all files to go to the same instance of Vim, start Vim with the --remote-silent option.
:ls
for list of open buffers
:bp previous buffer
:bn next buffer
:bn (n a number) move to n'th buffer
:b <filename-part> with tab-key providing auto-completion (awesome !!)
In some versions of vim, bn and bp are actually bnext and bprevious respectively. Tab auto-complete is helpful in this case.
Or when you are in normal mode, use ^ to switch to the last file you were working on.
Plus, you can save sessions of vim
:mksession! ~/today.ses
The above command saves the current open file buffers and settings to ~/today.ses. You can load that session by using
vim -S ~/today.ses
No hassle remembering where you left off yesterday. ;)
To add to the args list:
:argadd
To delete from the args list:
:argdelete
In your example, you could use :argedit test.pl to add test.pl to the args list and edit the file in one step.
:help args gives much more detail and advanced usage
I use buffer commands - :bn (next buffer), :bp (previous buffer) :buffers (list open buffers) :b<n> (open buffer n) :bd (delete buffer). :e <filename> will just open into a new buffer.
I think you may be using the wrong command for looking at the list of files that you have open.
Try doing an :ls to see the list of files that you have open and you'll see:
1 %a "./checkin.pl" line 1
2 # "./grabakamailogs.pl" line 1
3 "./grabwmlogs.pl" line 0
etc.
You can then bounce through the files by referring to them by the numbers listed, e.g.
:3b
or you can split your screen by entering the number but using sb instead of just b.
As an aside % refers to the file currently visible and # refers to the alternate file.
You can easily toggle between these two files by pressing Ctrl Shift 6
Edit: like :ls you can use :reg to see the current contents of your registers including the 0-9 registers that contain what you've deleted. This is especially useful if you want to reuse some text that you've previously deleted.
Vim (but not the original Vi!) has tabs which I find (in many contexts) superior to buffers. You can say :tabe [filename] to open a file in a new tab. Cycling between tabs is done by clicking on the tab or by the key combinations [n]gt and gT. Graphical Vim even has graphical tabs.
Things like :e and :badd will only accept ONE argument, therefore the following will fail
:e foo.txt bar.txt
:e /foo/bar/*.txt
:badd /foo/bar/*
If you want to add multiple files from within vim, use arga[dd]
:arga foo.txt bar.txt
:arga /foo/bar/*.txt
:argadd /foo/bar/*
Many answers here! What I use without reinventing the wheel - the most famous plugins (that are not going to die any time soon and are used by many people) to be ultra fast and geeky.
ctrlpvim/ctrlp.vim - to find file by name fuzzy search by its location or just its name
jlanzarotta/bufexplorer - to browse opened buffers (when you do not remember how many files you opened and modified recently and you do not remember where they are, probably because you searched for them with Ag)
rking/ag.vim to search the files with respect to gitignore
scrooloose/nerdtree to see the directory structure, lookaround, add/delete/modify files
EDIT: Recently I have been using dyng/ctrlsf.vim to search with contextual view (like Sublime search) and I switched the engine from ag to ripgrep. The performance is outstanding.
EDIT2: Along with CtrlSF you can use mg979/vim-visual-multi, make changes to multiple files at once and then at the end save them in one go.
Some answers in this thread suggest using tabs and others suggest using buffer to accomplish the same thing. Tabs and Buffers are different. I strongly suggest you read this article "Vim Tab madness - Buffers vs Tabs".
Here's a nice summary I pulled from the article:
Summary:
A buffer is the in-memory text of a file.
A window is a viewport on a buffer.
A tab page is a collection of windows.
To change all buffers to tab view.
:tab sball
will open all the buffers to tab view. Then we can use any tab related commands
gt or :tabn " go to next tab
gT or :tabp or :tabN " go to previous tab
details at :help tab-page-commands.
We can instruct vim to open ,as tab view, multiple files by vim -p file1 file2.
alias vim='vim -p' will be useful.
The same thing can also be achieved by having following autocommand in ~/.vimrc
au VimEnter * if !&diff | tab all | tabfirst | endif
Anyway to answer the question:
To add to arg list: arga file,
To delete from arg list: argd pattern
More at :help arglist
When using multiple files in vim, I use these commands mostly (with ~350 files open):
:b <partial filename><tab> (jump to a buffer)
:bw (buffer wipe, remove a buffer)
:e <file path> (edit, open a new buffer>
pltags - enable jumping to subroutine/method definitions
You may want to use Vim global marks.
This way you can quickly bounce between files, and even to the marked location in the file. Also, the key commands are short:
'C takes me to the code I'm working with,
'T takes me to the unit test I'm working with.
When you change places, resetting the marks is quick too:
mC marks the new code spot,
mT marks the new test spot.
If using only vim built-in commands, the best one that I ever saw to switch among multiple buffers is this:
nnoremap <Leader>f :set nomore<Bar>:ls<Bar>:set more<CR>:b<Space>
It perfectly combines both :ls and :b commands -- listing all opened buffers and waiting for you to input the command to switch buffer.
Given above mapping in vimrc, once you type <Leader>f,
All opened buffers are displayed
You can:
Type 23 to go to buffer 23,
Type # to go to the alternative/MRU buffer,
Type partial name of file, then type <Tab>, or <C-i> to autocomplete,
Or just <CR> or <Esc> to stay on current buffer
A snapshot of output for the above key mapping is:
:set nomore|:ls|:set more
1 h "script.py" line 1
2 #h + "file1.txt" line 6 -- '#' for alternative buffer
3 %a "README.md" line 17 -- '%' for current buffer
4 "file3.txt" line 0 -- line 0 for hasn't switched to
5 + "/etc/passwd" line 42 -- '+' for modified
:b '<Cursor> here'
In the above snapshot:
Second column: %a for current, h for hidden, # for previous, empty for hasn't been switched to.
Third column: + for modified.
Also, I strongly suggest set hidden. See :help 'hidden'.
I use the same .vimrc file for gVim and the command line Vim. I tend to use tabs in gVim and buffers in the command line Vim, so I have my .vimrc set up to make working with both of them easier:
" Movement between tabs OR buffers
nnoremap L :call MyNext()<CR>
nnoremap H :call MyPrev()<CR>
" MyNext() and MyPrev(): Movement between tabs OR buffers
function! MyNext()
if exists( '*tabpagenr' ) && tabpagenr('$') != 1
" Tab support && tabs open
normal gt
else
" No tab support, or no tabs open
execute ":bnext"
endif
endfunction
function! MyPrev()
if exists( '*tabpagenr' ) && tabpagenr('$') != '1'
" Tab support && tabs open
normal gT
else
" No tab support, or no tabs open
execute ":bprev"
endif
endfunction
This clobbers the existing mappings for H and L, but it makes switching between files extremely fast and easy. Just hit H for next and L for previous; whether you're using tabs or buffers, you'll get the intended results.
If you are going to use multiple buffers, I think the most important thing is to
set hidden
so that it will let you switch buffers even if you have unsaved changes in the one you are leaving.
I use the following, this gives you lots of features that you'd expect to have in other editors such as Sublime Text / Textmate
Use buffers not 'tab pages'. Buffers are the same concept as tabs in almost all other editors.
If you want the same look of having tabs you can use the vim-airline plugin with the following setting in your .vimrc: let g:airline#extensions#tabline#enabled = 1. This automatically displays all the buffers as tab headers when you have no tab pages opened
Use Tim Pope's vim-unimpaired which gives [b and ]b for moving to previous/next buffers respectively (plus a whole host of other goodies)
Have set wildmenu in your .vimrc then when you type :b <file part> + Tab for a buffer you will get a list of possible buffers that you can use left/right arrows to scroll through
Use Tim Pope's vim-obsession plugin to store sessions that play nicely with airline (I had lots of pain with sessions and plugins)
Use Tim Pope's vim-vinegar plugin. This works with the native :Explore but makes it much easier to work with. You just type - to open the explorer, which is the same key as to go up a directory in the explorer. Makes navigating faster (however with fzf I rarely use this)
fzf (which can be installed as a vim plugin) is also a really powerful fuzzy finder that you can use for searching for files (and buffers too). fzf also plays very nicely with fd (a faster version of find)
Use Ripgrep with vim-ripgrep to search through your code base and then you can use :cdo on the results to do search and replace
My way to effectively work with multiple files is to use tmux.
It allows you to split windows vertically and horizontally, as in:
I have it working this way on both my mac and linux machines and I find it better than the native window pane switching mechanism that's provided (on Macs). I find the switching easier and only with tmux have I been able to get the 'new page at the same current directory' working on my mac (despite the fact that there seems to be options to open new panes in the same directory) which is a surprisingly critical piece. An instant new pane at the current location is amazingly useful. A method that does new panes with the same key combos for both OS's is critical for me and a bonus for all for future personal compatibility.
Aside from multiple tmux panes, I've also tried using multiple tabs, e.g. and multiple new windows, e.g. and ultimately I've found that multiple tmux panes to be the most useful for me. I am very 'visual' and like to keep my various contexts right in front of me, connected together as panes.
tmux also support horizontal and vertical panes which the older screen didn't (though mac's iterm2 seems to support it, but again, the current directory setting didn't work for me). tmux 1.8
In my and other many vim users, the best option is to,
Open the file using,
:e file_name.extension
And then just Ctrl + 6 to change to the last buffer. Or, you can always press
:ls to list the buffer and then change the buffer using b followed by the buffer number.
We make a vertical or horizontal split using
:vsp for vertical split
:sp for horizantal split
And then <C-W><C-H/K/L/j> to change the working split.
You can ofcourse edit any file in any number of splits.
I use the command line and git a lot, so I have this alias in my bashrc:
alias gvim="gvim --servername \$(git rev-parse --show-toplevel || echo 'default') --remote-tab"
This will open each new file in a new tab on an existing window and will create one window for each git repository.
So if you open two files from repo A, and 3 files from repo B, you will end up with two windows, one for repo A with two tabs and one for repo B with three tabs.
If the file you are opening is not contained in a git repo it will go to a default window.
To jump between tabs I use these mappings:
nmap <C-p> :tabprevious<CR>
nmap <C-n> :tabnext<CR>
To open multiple files at once you should combine this with one of the other solutions.
I use multiple buffers that are set hidden in my ~/.vimrc file.
The mini-buffer explorer script is nice too to get a nice compact listing of your buffers. Then :b1 or :b2... to go to the appropriate buffer or use the mini-buffer explorer and tab through the buffers.
have a try following maps for convenience editing multiple files
" split windows
nmap <leader>sh :leftabove vnew<CR>
nmap <leader>sl :rightbelow vnew<CR>
nmap <leader>sk :leftabove new<CR>
nmap <leader>sj :rightbelow new<CR>
" moving around
nmap <C-j> <C-w>j
nmap <C-k> <C-w>k
nmap <C-l> <C-w>l
nmap <C-h> <C-w>h
I made a very simple video showing the workflow that I use. Basically I use the Ctrl-P Vim plugin, and I mapped the buffer navigation to the Enter key.
In this way I can press Enter in normal mode, look at the list of open files (that shows up in a small new window at the bottom of the screen), select the file I want to edit and press Enter again. To quickly search through multiple open files, just type part of the file name, select the file and press Enter.
I don't have many files open in the video, but it becomes incredibly helpful when you start having a lot of them.
Since the plugin sorts the buffers using a MRU ordering, you can just press Enter twice and jump to the most recent file you were editing.
After the plugin is installed, the only configuration you need is:
nmap <CR> :CtrlPBuffer<CR>
Of course you can map it to a different key, but I find the mapping to enter to be very handy.
I would suggest using the plugin
NERDtree
Here is the github link with instructions.
Nerdtree
I use vim-plug as a plugin manager, but you can use Vundle as well.
vim-plug
Vundle
When I started using VIM I didn't realize that tabs were supposed to be used as different window layouts, and buffer serves the role for multiple file editing / switching between each other. Actually in the beginning tabs are not even there before v7.0 and I just opened one VIM inside a terminal tab (I was using gnome-terminal at the moment), and switch between tabs using alt+numbers, since I thought using commands like :buffers, :bn and :bp were too much for me. When VIM 7.0 was released I find it's easier to manager a lot of files and switched to it, but recently I just realized that buffers should always be the way to go, unless one thing: you need to configure it to make it works right.
So I tried vim-airline and enabled the visual on-top tab-like buffer bar, but graphic was having problem with my iTerm2, so I tried a couple of others and it seems that MBE works the best for me. I also set shift+h/l as shortcuts, since the original ones (moving to the head/tail of the current page) is not very useful to me.
map <S-h> :bprev<Return>
map <S-l> :bnext<Return>
It seems to be even easier than gt and gT, and :e is easier than :tabnew too. I find :bd is not as convenient as :q though (MBE is having some problem with it) but I can live with all files in buffer I think.
Most of the answers in this thread are using plain vim commands which is of course fine but I thought I would provide an extensive answer using a combination of plugins and functions that I find particularly useful (at least some of these tips came from Gary Bernhardt's file navigation tips):
To toggle between the last two file just press <leader> twice. I recommend assigning <leader> to the spacebar:
nnoremap <leader><leader> <c-^>
For quickly moving around a project the answer is a fuzzy matching solution such as CtrlP. I bind it to <leader>a for quick access.
In the case I want to see a visual representation of the currently open buffers I use the BufExplorer plugin. Simple but effective.
If I want to browse around the file system I would use the command line or an external utility (Quicklsilver, Afred etc.) but to look at the current project structure NERD Tree is a classic. Do not use this though in the place of 2 as your main file finding method. It will really slow you down. I use the binding <leader>ff.
These should be enough for finding and opening files. From there of course use horizontal and vertical splits. Concerning splits I find these functions particularly useful:
Open new splits in smaller areas when there is not enough room and expand them on navigation. Refer here for comments on what these do exactly:
set winwidth=84
set winheight=5
set winminheight=5
set winheight=999
nnoremap <C-w>v :111vs<CR>
nnoremap <C-w>s :rightbelow split<CR>
set splitright
Move from split to split easily:
nnoremap <C-J> <C-W><C-J>
nnoremap <C-K> <C-W><C-K>
nnoremap <C-L> <C-W><C-L>
nnoremap <C-H> <C-W><C-H>
if you're on osx and want to be able to click on your tabs, use MouseTerm and SIMBL (taken from here). Also, check out this related discussion.
You can be an absolute madman and alias vim to vim -p by adding in your .bashrc:
alias vim="vim -p"
This will result in opening multiple files from the shell in tabs, without having to invoke :tab ball from within vim afterwards.
To open 2 or more files with vim type: vim -p file1 file2
After that command to go threw that files you can use CTRL+Shift+↑ or ↓ , it will change your files in vim.
If u want to add one more file vim and work on it use: :tabnew file3
Also u can use which will not create a new tab and will open file on screen slicing your screen: :new file3
If u want to use a plugin that will help u work with directories
and files i suggest u NERDTree.
To download it u need to have vim-plug so to download other plugins also NERDTree to type this commands in your ~/.vimrc.
let data_dir = has('nvim') ? stdpath('data') . '/site' : '~/.vim'
if empty(glob(data_dir . '/autoload/plug.vim'))
silent execute '!curl -fLo '.data_dir.'/autoload/plug.vim --create-dirs
https://raw.githubusercontent.com/junegunn/vim-plug/master/plug.vim'
autocmd VimEnter * PlugInstall --sync | source $MYVIMRC
endif
call plug#begin('~/.vim/plugged')
Plug 'scrooloose/nerdtree'
call plug#end()
Then save .vimrc via command :wq , get back to it and type: :PlugInstall
After that the plugins will be installed and u could use your NERDTree with other plugins.
I wrote the following command to search Vim's help files:
command! -n=1 -complete=help SearchHelp \
help | execute "grep! -i <args> $VIMRUNTIME/doc/ -r" | botright copen
Now, for example, when I have forgotten the key to increment the number under the cursor, I can do:
:SearchHelp increment
to search through the help files. (The answer turned out to be <Ctrl-A>.)
The problem is ... I have a few windows open, and I want quickfix to leave them alone. When I hit <Enter> in the quickfix list, I want it to open the result in that help window which I split open at the beginning of the command.
But it doesn't do this. It seems to prefer to always open the result in the bottom-most of all my editing windows, regardless of which window I was focused on, and with complete disinterest for the help window I opened. Obviously this moves away from whatever file I happened to be editing in that window (yes I have :set hidden), requiring an arbitrary number of <Ctrl-O> keys to get back to the file when I have finished browsing the help files.
So how can I get quickfix to open in the previously focused window (ideally that help window that was split open)?
(Incidentally, I sometimes use a patched version of Yegappan Lakshmanan's old grep.vim plugin, and somehow this does open :cope results in the window that had focus before I ran :Grep. I am not sure what's different in the two situations.)
The behavior (among others like :sbuffer) is controlled by the 'switchbuf' option. With a value of useopen, you can make it re-use a window if it already displays that help page. If you need more control than what is offered by that option, you do need to use a custom command / mapping.
So far what I have come up with is to replace that help command with:
99wincmd j | wincmd s
This splits whatever window happens to be at the bottom of the screen, so that when the quickfix clobbers the bottom one, I still have a window that keeps the file visible.
This solution is workable, but not quite as neat as my preferred result, which is to open results in the help window which was split just above the window I was focused on when I ran the command.
I've got emacs in front of me.
I've run a find-grep, and it's got many hits, which are displayed in a window. The file names are displayed in green as hyperlinks.
I make that the only window, with C-x 1.
If I click on a file name, the window splits vertically, and the file with the found text is displayed in the other window.
If I click on further filenames, then the new file replaces the old file, which is what I want to happen.
So far, so good...
However if I resize the windows, then emacs will periodically (when I click) split one of the two windows again, rendering the display difficult to read. It will then cycle opening new files between the two new windows. Occasionally it will open more windows and make the situation worse. If I close any of these new windows they just get reopened again.
In fact sometimes this perverse behaviour happens even if I don't resize anything. It just seems to happen more often if I do.
I would like emacs to stop buggering around and just have one find-grep window and one 'display' window, and always replace the display window with the new file. I would also like to be able to set these windows to the sizes that seem most convenient.
Is there any way to achieve this?
Or can anyone point me to an essay on how the whole (replace the contents of this window/replace the contents of a different window/create another window by splitting) thing works, so I can go and hack it sane.
Short fix:
Try doing this
(setq split-height-threshold nil
split-width-threshold nil)
This will prevent Emacs from splitting windows automatically (horizontally or vertically). This might be undesirable in other situations, but this should do the job. Try it for a week or so and see if it disrupts your flow.
Also, I found that if the point was in one of the windows, and I clicked on a link, the file opened up in the next window (if any).
So, if you want to make the file open in the right window (when you have more than one window), you can ensure that the point is in the window before the window you want.
Longer answer:
OK. I was able to reproduce the problem. The thing is the window showing the files is pretty big (wide or tall) because you resized it and Emacs sees that the width or height is greater than the respective threshold and splits it likewise. So, we have to either make the threshold higher or disallow the behaviour completely.
And, just to answer the last few questions:
To get current window - (selected-window)
To get next window - (next-window)
To select a window - (select-window foo-window)
To get the buffer of the current window - (current-buffer)
To get the buffer of some window - (window-buffer foo-window)
To set a buffer for a window - (set-window-buffer foo-window bar-buffer)
I'm sure you can hack together decent window/buffer management functions using these functions.
You can use C-h f to get more details on each of these functions.
Also check out the Elisp manual - http://www.chemie.fu-berlin.de/chemnet/use/info/elisp/elisp_26.html
For example, let's say I have three tabs open in vim:
1: nice_program.c
2: something_fun.h
3: super_script.sh
So if I hit some magic modifier key, and then type 'n' and hit enter I change tab to tab 1. Likewise, typing 'su' instead will navigate me to tab 3 instead.
Is such behavior possible? There are so many vim extensions, and I dont really get the whole vim extension lingo.
BTW, I am using gVim on XP and MacVim on OS X. Preferably the solution will work on both...
EDIT:
Note that I only want the incremental search to search across the names of the open tabs. That is, it's not supposed to actually search inside the tabs themselves.
Also, I never use buffers, it's tabs that I want this working for.
From the wording of the question it seems that you take the idea of tabs in
Vim not the way it is supposed to be taken by design of this feature. A Vim
tab page is not a form of a buffer or a window, it is a window layout
container, instead. No wonder there is no built-in way for switching to a tab
by the name of a buffer that is active (or the only one in its tab page, or
special in some other way). Semantically, that is switching to a buffer, not
a tab (but tab could be switched in order to show a buffer, if it is
necessary).
To switch to a buffer by its name use the :sbuffer command (:sb, for
short). It is not necessary to type the whole buffer name each time, since
the command has auto-completion. Usually one have to type only few letters of
a name to uniquely identify a buffer (the same way as you described
incremental search in the question).
By default, Vim open the requested buffer displacing one in the current
window. This behavior is governed by the switchbuf option. One of the
choices (called usetab) provided by that option allows to switch to a window
in another tab page if that window contains the buffer to edit. This is
exactly what suits your manner of work with tab pages.
To summarize, change the switching behavior as follows
:set switchbuf=usetab
and use the :sb command to open a buffer by typing a few letters of its name
and using Tab-completion.
I use this snippet I picked up in vim wiki to switch between open buffers (mapped to F5):
" switch between numbered buffers
:nnoremap <F5> :buffers<CR>:buffer<Space>
(put in your .vimrc file or whichever dotfile you use).
As for incremental search across open buffers, whenever I look up something using either /[something] or with */# on current word, it's automagically also highlighted in other buffers/tabs. Then I can switch buffers and hit n or N to move between matches in the currently viewed buffer. That's already baked into Vim.
Hope that helps.
The :set switchbuf=usetab solution given by ib never worked for me for whatever reason (even without loading plugins or my .vimrc) but :tab drop name-of-file works just the way you want (I found it on the Vim wiki).
Make it a custom mapping to save a few keystrokes with nnoremap <leader>t :tab drop.
Also I second ib's comment on the right and wrong way to use tabs in Vim.
I have been reading a lot of the questions here on vim. I can't locate something that I want to do with vim but I am sure its possible.
I like vim(I am still new at it) using tabs and I have adjusted my vimrc so that H & L keys take me back and forth between tabs.
I was hoping to find a way to be able to use tab commands to open up a tab as output, so that if I am writing something in my case Ruby and I want to test it I could run it and flip to a new tab with the output. Or flip a tab to an interactive console to test code. This is possible?
As an aside is it possible to expand tabs to views so if I had two tabs open say script and output I could :spx or similar and have tabs come to split screen.
You can load the ruby output into a vim window in a couple of ways. One way would be to open a new split window and then load output of command:
" vimscript command to open new split window
wincmd n
" run ruby command and insert output at line 1
1,1!ruby foo.rb
alternatively you could get view the output on a new tab with a single window:
tabnew
1,1!ruby foo.rb
I know it's not the answer you want, but use buffers and ditch the tabs. I have a screencast going over how to use splits to manage your window.
http://lococast.net/archives/111
As for the ruby output, that seems like it might be covered here:
https://superuser.com/questions/133886/vim-displaying-code-output-in-a-new-window-a-la-textmate
In answer to your question about opening up a tab as output, I don't think there's any built in way to do this. There's the RunView plugin (see my answers to this question and this one), but I don't think that it supports using a separate tab (it works with a split window: what I think you refer to when you say 'view').
Regarding an interactive console: no, this is not possible. See :help design-not.
As for general use of Vim, try to get used to the idea of buffers and the fact that each 'view' (my term), whether it be a split window, a tab or whatever is just a means of looking at a particular buffer. You can have multiple views on a single buffer, so you can have a source file vertical split with two headers in one tab and the same source file vertically split with another header and a different bit of the same source file in another tab. This is very powerful once you get used to it. The Ctrl-W keyboard shortcuts are your friend (e.g. Ctrl-W, h to go left one window).
As for changing a tab into a split window, I don't think there's a direct way to do this (how would Vim know which tabs you wanted to join?). You can break a split into a tab with Ctrl-W + T, but to go back you'd have to create a couple of mappings. This is off the top of my head but something like this might work:
command! TakeThis let takebufnr = bufnr("")<CR>
command! SplitTaken exe 'split #' . takebufnr<CR>
nmap ,t :TakeThis<CR>
nmap ,s :SplitTaken<CR>
Then press ,t on the buffer you want to grab and ,s on the one you want to split with the 'taken' buffer.