Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 8 years ago.
Improve this question
I've been banging my head against a wall here and can't seem to get this Exchange Management Console to work. First some stats...
Device: Windows 7 Pro - Service Pack 1 - x64
Software - Exchange Server 2010 Service Pack 1 http://www.microsoft.com/en-us/download/details.aspx?id=21570
I've installed the World Wide Web Publishing Service and it shows as 'running' in the services window.
The error I get when I launch the EMC.
"The world wide web publishing service (W3SVC) isn't running on any exchange server in the site"
Well... I beg to differ WINDOWS... Anyway, I've been searching a solution for this for over an hour now, the majority say that the EMC version needs to match the Windows version. It does. They are both SP1... Any guidance here would be amazing!
Thanks!
OK, Let's being like this, we need to get more precise Error 1 - Windows 7 Pro - Service Pack 1 - x64 Software - Exchange Server 2010 Service Pack 1 IS NOT A DEVICE, it's a SOFTWARE ENVIRONMENT, Just saying, Lets Save Time and Use the info you have already obtained from hours of research, You said Most of it says that the EMC Version NEEDS to match the Windows Version, So.. Let's start with the Error Message, W3SVC is not running, However You have Visually confirmed that the Service is running under Windows, that means that the EMC is not communicating with SERVICES, Now, You said that Most of your research leads to EMC VERSION NEEEDS TO MATCH WINDOWS VERSION, then you stated "it does they are both Service Pack 1" BE ADVISED Service Packs ARE NOT Versions, so let's now Please do some research and get back to me with the EMC version and the Windows Version You can obtain windows version by going to SEARCH and typing winver We already know that your Using Windows 7 Professional 9 i assume 64bit) , so logically, Find out the Version of your EMC and Exchange server and you should be heading in the right direction, my guess is this will most likely fix your issue, Keep in mind, Service Pack 1, is not a version, it's a Service Pac Please do that first and then we can proceed, My guess is that the Versions need to be the same in order to communicate with SERVICES, Sound Logical, get that done and i think you'll have yourself a solution. let me know how you go.
Related
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 5 years ago.
Improve this question
So i have a challenge and question for you. My Windows 10 crashed itself yesterday evening with orange "bluescreen of death"(cursed be the guy or girl that designed cashing in Windows). I don't exactly remember the message but when laptop turned off... there was no longer detectable instance of Windows(cursed be the guy or girl designing boot part of Windows 10, only an idiot could do it like this).
Machine is Lenovo Y700 and Windows 10 x64.
That was the problem description part.
My troubleshoot part begins now. NONE OF THESE WORKED
I tried to check if that was hardware problem but all disks are detectable. Tried to reattach them. They all seem to be working fine.
Tried to change from UEFI boot to Legacy boot.
I created bootable repair USB and tried to chkdsk /r c:, nothing was corrupted there
Tried BOOTREC /SCANOS, BOOTREC /FIXMBR, BOOTREC /FIXBOOT, BOOTREC /REBUILDBCD.
Tried to automatic repair system. I knew it would not work as Windows troubleshoot tools are made by "dumb people" and they never work on Windows 10 but ok.(yes they are, in previous month my Windows 10 corrupted thanks to dumb system update cutting me from every program as they could not launch and menu start were frozen)
Tried revert to previous compilation but it cannot detect Windows Bootable Manager most probably, so no luck.
Cannot revert to base version as it does not see Windows at all.
Tried to install new Windows on top of the old one but it does not detect anything about it, so i don't even have the fricking WINDOWS KEY AS IT IS BUILT IN WINDOWS INSTANCE... GRRRRR
Now i need somebody to help me fix detection of Windows instance, so i can do anything about it. Please help.
You could try to remove the harddisk and conect is with an adapter to usb so it acts like an external drive, then install windows on it and place it back.
Or swap the disk in another laptop and do the same thing.
Or you could try to reinstall your bios (wich could cause even more headache)
Or perhaps your harddisk crashed and is not recoverable then replace your disk.
Or try to remove your RAM memory, perhaps that is corrupted..
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 2 years ago.
Improve this question
I'm trying to fill up a form from here . Upon selecting Natural Person from the drop-down menu, a form appears with a button Add Digital Signature. Whenever I click on this button, it gives me this error:
An error occurred when attempting to open certificate list, the error was:
Automation server can't create object
I've tried enabling the Initialize and Script Activex controls not marked as safe for scripting feature from internet option but the same error occurred.
I've tried different versions of Internet Explorer starting from version 6. Can anyone help me ?
1)Download capicom_dc_sdk.msi from
https://www.microsoft.com/en-us/download/details.aspx?id=25281
and install.
2)Locate capicom.dll "e.g. C:\Program Files (x86)\Microsoft CAPICOM 2.1.0.2 SDK\Lib\X86\capicom.dll"
2)Open command prompt with administrator privilege, change directory to directory containing capicom.dll and fire below command
regsvr32 capicom.dll
i was facing same problem. Then I called e-mudhra (I bought dsc from here ) customer care. They took access of my laptop via anydesk, and they performed similar operation i.e.
downloaded capicom.dll.zip.
extracted it.
then copied it (capicom.dll) to : This PC > OS (C:) > Windows > SysWOW64.
then run below command as administrator in cmd :
Microsoft Windows [Version 10.0.18362.836]
(c) 2019 Microsoft Corporation. All rights reserved.
C:\WINDOWS\system32>cd ..
C:\Windows>cd SysWOW64
C:\Windows\SysWOW64>regsvr32 capicom.dll
C:\Windows\SysWOW64>
5. Now try with Internet Explorer. (Mozilla firefox will not work !)
Now I am able to sign up on website ipindiaonline.gov.in
Process is needed each time after you restart your computer.
Please note that running cmd in Administrator mode is necessary.
To people reaching here, I solved it by installing a digital certficate provided by e-patent website. You need to check which class of certificate you want for authentication.
Here's the updated link from where you can download the certificate:
https://ipindiaonline.gov.in/epatentfiling/faqs/index.html
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 7 years ago.
Improve this question
I have a Windows 7 host machine with a VMWARE Workstation 9 based guest operating instance. What I need is that the guest OS to not only run but runs inside the guest in the VMWARE Workstation gui upon a host reboot--say, from a power failure. I have tried all solutions online but so far I am unable to make the GUI to appear--though the guest OS does launch.
Here is my solution so far: I have created a .bat file and setup Windows Task Scheduler to start the .bat program. Here is what's inside the batch file:
cd "C:\Program Files (x86)\VMware\VMware Workstation"
vmrun start "C:\VirtualMachines\WindowsServer2012_std_ArcGISVM2\Windows Server 2012 Std.vmx" gui
Note, I am using 'vmrun' program but using other online solutions which use the VM Ware Workstation's executable doesn't help with the gui part either. And adding or removing the 'gui' flag doesn't seem to make any difference.
Also note, I'd rather not use the Workstation as a Server in a 'shared' virtual machine setup. There should be a simpler way.
Thanks!
[Edited/Detailed Answer Below]
Never mind. I did end up creating a Shared VM per the instructions from another site (whose link is not working anymore!)
Here is how I accomplished this:
Using VMWare Workstation gui, pressed F9 to bring up option to enable Sharing of VMs.
In the Sharing window, right click on your VM ->Manage -> Share the VM; I chose default options.
In the same gui, under 'Shared VMs' tab, click 'Manage Auto Start'
That's all it took! And now I am able to launch the VMWare Workstation GUI after the host system reboots.
PS. I posted the Question here because I was originally using a script to achieve this; I thought there could be more scripts/programming solutions. Also, Expert Exchange maybe a competition but it provided me full solution yesterday without requiring any login; so, being a once paying member there, I had assumed that they have now become a 'free' site. But today their link doesn't work.
Closed. This question does not meet Stack Overflow guidelines. It is not currently accepting answers.
This question does not appear to be about a specific programming problem, a software algorithm, or software tools primarily used by programmers. If you believe the question would be on-topic on another Stack Exchange site, you can leave a comment to explain where the question may be able to be answered.
Closed 9 years ago.
Improve this question
I was attempting to follow this tutorial in order to test Delphi Xe5 IOS app development using Mac in the Cloud
http://www.youtube.com/watch?v=zORe2voUHIU
I received the following info in email
Your server name is: L108
Your Mac username is: userXXXX
Your Mac password is: pasXXXXX
I also received a remote desktop connection link on my desktop :)
When clicked, the remote Mac machine is launched (says I am connecting to LA204) and my PA server (PA3609) terminal window is available.
No sure why the email says my server is L108 and the remote connection link is connecting me to LA204 (I need a New York Server)
Using the following commands:
? for help
p = port and i = ip address
port = 64270
ip address = 74.80.228.166
Using Delphi Xe5 "connections profile manager"I created my profile Platform OS X, Host: 74.80.228.166, port # 64211 (also tried 64270)
However, Test connection failed
Any help would be greatly appreciated - I am burning up all my test time trying to do this on my own.
For future information for those you seek it, this is what the support team claims has happened (although I dispute the claim :) )
"Sir,
From your previous description, you appear to have received two
accounts:
#1: an account on server LA204 (please review which particular email has this information sent to you)
#2: an account on server L108 and username userXXXX (if you review the email that was sent to you with this login information, there is a
download link right below the login information that you should use
with this particular account)
From your description, you mentioned that "I also received a remote
desktop connection link on my desktop" This only happens through
Embacadero's integrated signup process, which creates a connection
file on your desktop.
If you sign up through our own website, and if you download through
the download link provided in the email, the connection file will be a
zip file in your download folder, no connection file will be
automatically created on your desktop.
Here we attach a screenshot of the email we issued to you, as you may
see in this email, the download link that was provided is "Please
download your MacinCloud connection files from the following link:
http://www.macincloud.com/images/MacinCloud_Lion_L108.zip"
The connection profile that is pointing to LA204 can only come from a
different source. Our best guess is that you have also signed up
through Embarcadero's integrated trial process. It is not uncommon
that this happens and this could be the cause of the confusion."
NOTE: I never signed up from Embarcadero's site or IDE, I only signed up from Mac In the Cloud website. In any case, this is what they claimed happened and as far as I am concerned, as long ad it is working, I am happy.
Closed. This question is off-topic. It is not currently accepting answers.
Want to improve this question? Update the question so it's on-topic for Stack Overflow.
Closed 11 years ago.
Improve this question
Trying to setup an SSH server on Windows Server 2003. What are some good ones? Preferably open source. I plan on using WinSCP as a client so a server which supports the advanced features implemented by that client would be great.
I've been using Bitvise SSH Server and it's really great. From install to administration it does it all through a GUI so you won't be putting together a sshd_config file. Plus if you use their client, Tunnelier, you get some bonus features (like mapping shares, port forwarding setup up server side, etc.) If you don't use their client it will still work with the Open Source SSH clients.
It's not Open Source and it costs $39.95, but I think it's worth it.
UPDATE 2009-05-21 11:10: The pricing has changed. The current price is $99.95 per install for commercial, but now free for non-commercial/personal use. Here is the current pricing.
I agree that cygwin/OpenSSH is the best choice, but its setup can be involved to say the least. Here is a document to get you started though: Installing OpenSSH
I've been using Bitvise SSH Server for a number of years. It is a wonderful product and it is easy to setup and maintain. It gives you great control over how users connect to the server with support for security groups.
copssh - OpenSSH for Windows
http://www.itefix.no/i2/copssh
Packages essential Cygwin binaries.
OpenSSH is a contender. Looks like it hasn't been updated in a while though.
It's the de facto choice in my opinion. And yes, running under Cygwin is really the nicest method.
VanDyke VShell is the best Windows SSH Server I've ever worked with. It is kind of expensive though ($250). If you want a free solution, freeSSHd works okay. The CYGWIN solution is always an option, I've found, however, that it is a lot of work & overhead just to get SSH.
You can run OpenSSH on Cygwin, and even install it as a Windows service.
I once used it this way to easily add backups of a Unix system - it would rsync a bunch of files onto the Windows server, and the Windows server had full tape backups.