I am trying to use pcregrep -M to search for a multiline string.
This is the line in my script:
lineNumber=$(pcregrep -Mn '$firstLine.*\n.*$secondLine.*' $myFile)
myFile contains multiple lines of the form:
firstLine\n
secondLine(with other characters here that I don't need to match)
I get an empty string for lineNumber and that's all.
What am I doing wrong?
What should I expect for the return value? Shouldn't -n give me the line number? And if so, which line number, first or second?
Should I use awk or sed instead and if so how?
First, a working regex is needed. If I correctly understand what you asking for, this will work:
pcregrep -Mn '^firstLine.*\n^secondLine' myFile
Note, that this prints more than just the line numbers. As per the pcregrep man page, it also prints the the matching lines.
If you want to print just the starting line numbers, try:
sed -n '/^firstLine/=' myFile
the regex /^firstLine/ selects the first line and the command = tells sed to print the line number.
To print just the ending line numbers:
sed -n '/^secondLine/=' myFile
To get both and any line in between:
sed -n '/^firstLine/,/^secondLine/=' myFile
awk can also be used. The line selection is similar. The command to print the line number differs. For example:
awk '/^firstLine/ {print NR}' myFile
Capturing the line numbers into a variable
The line numbers can be captured into a variable with command substitution:
lineNumber=$(awk '/^firstLine/ {print NR}' myFile)
However, if there are more two or more line numbers, that may not be useful to you. In that event, if you are using a shell that supports arrays, such as bash, you may prefer to capture the line numbers into an array as follows:
lineNumbers=($(awk '/^firstLine/ {print NR}' myFile))
If you are unfamiliar with arrays, note that statements such as echo $lineNumbers will not display the entire array, only its first element. To see the whole array, run:
declare -p lineNumbers
Related
I want to assign the first value of
grep -E --line-number --with-filename '^$' filename
to a variable. This command will return the line number of every empty line in my data file, which occur at the same interval as the first empty line like:
filename:122:
filename:244:
filename:366:
Is there a way to only return the line number of the first empty line - i.e. 122?
That'd be easier with AWK.
awk '! NF { print NR; exit }' file
You can limit the number of matches per file using -m.
Therefore, to generate a list of files and line numbers of their first empty lines use
grep -E --line-number --with-filename -m1 '^$' list of files
or equivalent but shorter
grep -EnHm1 '^$' list of files
A fairly concise sed one-liner:
sed '/./d;=;q' file
You can specify the -n option if the extra newline isn't desired.
Notes:The title and text in the question are not consistent. The empty line is not equivalent to the blank line. The sed command above will print the line number of the first empty line. If printing the first blank line is intended, the . should be replaced with [^[:blank:]].
I have a question on Bash:
Like the title says, I require bash to output a certain word, depending on where it is in the file. In my explicit example I have a simple .txt file.
I already found out that you can count the number of words within a file with the command:
wc -w < myFile.txt
An output example would be:
78501
There certainly is also a way to make "cat" to only show word number x. Something like:
cat myFile.txt | wordno. 3125
desired-word
Notice, that I will welcome any command, that gets this done, not only cat.
Alternatively or in addition, I would be happy to know how you can make certain characters in a file show, based on their place in it. Something like:
cat myFile.txt | characterno. 2342
desired-character
I already know how you can achieve this with a variable:
a="hello, how are you"
echo ${a:9:1}
w
Only problem is a variable can only be so long. Is it as long as a whole .txt file, it won't work.
I look forward to your answers!
You could use awkfor this job it splits the string at spaces and prints the $wordnumber stringpart and tr is used to remove newlines
cat myFile.txt | tr -d '\n' | awk -v wordnumber=5 '{ print $wordnumber }'
And if you want the for example 5th. character you could do this like so
head -c 5 myFile.txt | tail -c 1
Since you have NOT shown samples of Input_file or expected output so couldn't test it. You could simply do this with awk as follows could be an example.
awk 'FNR==1{print substr($0,2342,1);next}' Input_file
Where we are telling awk to look for 1st line FNR==1 and in substr where we tell awk to take character 2342 and next 1 means from that position take only 1 character you could increase its value or keep it as per your need too.
With gawk:
awk 'BEGIN{RS="[[:space:]]+"} NR==12345' file
or
gawk 'NR==12345' RS="[[:space:]]+" file
I'm setting the record separator to a sequences of spaces which includes newlines and then print the 12345th record.
To improve the average performance you can exit the script once the match is found:
gawk 'BEGIN{RS="[[:space:]]+"}NR==12345{print;exit}' file
I am trying to do this:
I have a file with content like below;
file:
abcdefgh
I am looking for a way to do this;
file:
aBCdefgh
So,make the 2nd and 3rd letter "capital/uppercase" in the file itself, because I have to do multiple conversions at different positions in a string in the file. Can someone please help me to know how to do this?
I came to know something like this below, but it does only for a single first character of the string in the file:
sed -i 's/^./\U&/' file
output:
Abcdefgh
Thanks much!
Change your sed approach to the following:
sed -i 's/\(.\)\(..\)/\1\U\2/' file
$ cat file
aBCdefgh
matching section:
\(.\) - match the 1st char of the string into the 1st captured group
\(..\) - match the next 2 chars placing into the 2nd captured group
replacement section:
\1 - points to the 1st parenthesized group \1 i.e. the 1st char
\U\2 - uppercase the characters from the 2nd captured group \2
Bonus approach for I want to capitalize "105th & 106th" characters:
sed -Ei 's/(.{104})(..)/\1\U\2/' file
awk on duty.
echo "abcdefgh" | awk '{print substr($0,1,1) toupper(substr($0,2,2)) substr($0,4)}'
Output will be as follows.
aBCdefgh
In case you have a Input_file and you want to save the edits into same Input_file.
awk '{print substr($0,1,1) toupper(substr($0,2,2)) substr($0,4)}' Input_file > temp_file && mv temp_file Input_file
Explanation: Please run above code as this is only for explanation purposes.
echo "abcdefgh" ##using echo command to print a string on the standard output.
| ##Pipe(|) is used for taking a command's standard output to pass as a standard input to another command(in this case echo is passing it's standard output to awk).
awk '{ ##Starting awk here.
##Print command in awk is being used to print anything variable, string etc etc.
##substring is awk's in-built utility which will allow us to get the specific parts of the line, variable. So it's syntax is substr(line/variable,starting point of the line/number,number of characters you need from the strating point mentioned), in case you haven't mentioned any number of characters it will take all the characters from starting point to till the end of the line.
##toupper, so it is also a awk's in-built utility which will covert any text to UPPER CASE passed to it, so in this case I am passing 2nd and 3rd character to it as per OP's request.
print substr($0,1,1) toupper(substr($0,2,2)) substr($0,4)}'
I have a file with about 1000 lines. I want the part of my file after the line which matches my grep statement.
That is:
cat file | grep 'TERMINATE' # It is found on line 534
So, I want the file from line 535 to line 1000 for further processing.
How can I do that?
The following will print the line matching TERMINATE till the end of the file:
sed -n -e '/TERMINATE/,$p'
Explained: -n disables default behavior of sed of printing each line after executing its script on it, -e indicated a script to sed, /TERMINATE/,$ is an address (line) range selection meaning the first line matching the TERMINATE regular expression (like grep) to the end of the file ($), and p is the print command which prints the current line.
This will print from the line that follows the line matching TERMINATE till the end of the file:
(from AFTER the matching line to EOF, NOT including the matching line)
sed -e '1,/TERMINATE/d'
Explained: 1,/TERMINATE/ is an address (line) range selection meaning the first line for the input to the 1st line matching the TERMINATE regular expression, and d is the delete command which delete the current line and skip to the next line. As sed default behavior is to print the lines, it will print the lines after TERMINATE to the end of input.
If you want the lines before TERMINATE:
sed -e '/TERMINATE/,$d'
And if you want both lines before and after TERMINATE in two different files in a single pass:
sed -e '1,/TERMINATE/w before
/TERMINATE/,$w after' file
The before and after files will contain the line with terminate, so to process each you need to use:
head -n -1 before
tail -n +2 after
IF you do not want to hard code the filenames in the sed script, you can:
before=before.txt
after=after.txt
sed -e "1,/TERMINATE/w $before
/TERMINATE/,\$w $after" file
But then you have to escape the $ meaning the last line so the shell will not try to expand the $w variable (note that we now use double quotes around the script instead of single quotes).
I forgot to tell that the new line is important after the filenames in the script so that sed knows that the filenames end.
How would you replace the hardcoded TERMINATE by a variable?
You would make a variable for the matching text and then do it the same way as the previous example:
matchtext=TERMINATE
before=before.txt
after=after.txt
sed -e "1,/$matchtext/w $before
/$matchtext/,\$w $after" file
to use a variable for the matching text with the previous examples:
## Print the line containing the matching text, till the end of the file:
## (from the matching line to EOF, including the matching line)
matchtext=TERMINATE
sed -n -e "/$matchtext/,\$p"
## Print from the line that follows the line containing the
## matching text, till the end of the file:
## (from AFTER the matching line to EOF, NOT including the matching line)
matchtext=TERMINATE
sed -e "1,/$matchtext/d"
## Print all the lines before the line containing the matching text:
## (from line-1 to BEFORE the matching line, NOT including the matching line)
matchtext=TERMINATE
sed -e "/$matchtext/,\$d"
The important points about replacing text with variables in these cases are:
Variables ($variablename) enclosed in single quotes ['] won't "expand" but variables inside double quotes ["] will. So, you have to change all the single quotes to double quotes if they contain text you want to replace with a variable.
The sed ranges also contain a $ and are immediately followed by a letter like: $p, $d, $w. They will also look like variables to be expanded, so you have to escape those $ characters with a backslash [\] like: \$p, \$d, \$w.
As a simple approximation you could use
grep -A100000 TERMINATE file
which greps for TERMINATE and outputs up to 100,000 lines following that line.
From the man page:
-A NUM, --after-context=NUM
Print NUM lines of trailing context after matching lines.
Places a line containing a group separator (--) between
contiguous groups of matches. With the -o or --only-matching
option, this has no effect and a warning is given.
A tool to use here is AWK:
cat file | awk 'BEGIN{ found=0} /TERMINATE/{found=1} {if (found) print }'
How does this work:
We set the variable 'found' to zero, evaluating false
if a match for 'TERMINATE' is found with the regular expression, we set it to one.
If our 'found' variable evaluates to True, print :)
The other solutions might consume a lot of memory if you use them on very large files.
If I understand your question correctly you do want the lines after TERMINATE, not including the TERMINATE-line. AWK can do this in a simple way:
awk '{if(found) print} /TERMINATE/{found=1}' your_file
Explanation:
Although not best practice, you could rely on the fact that all variables defaults to 0 or the empty string if not defined. So the first expression (if(found) print) will not print anything to start off with.
After the printing is done, we check if this is the starter-line (that should not be included).
This will print all lines after the TERMINATE-line.
Generalization:
You have a file with start- and end-lines and you want the lines between those lines excluding the start- and end-lines.
start- and end-lines could be defined by a regular expression matching the line.
Example:
$ cat ex_file.txt
not this line
second line
START
A good line to include
And this line
Yep
END
Nope more
...
never ever
$ awk '/END/{found=0} {if(found) print} /START/{found=1}' ex_file.txt
A good line to include
And this line
Yep
$
Explanation:
If the end-line is found no printing should be done. Note that this check is done before the actual printing to exclude the end-line from the result.
Print the current line if found is set.
If the start-line is found then set found=1 so that the following lines are printed. Note that this check is done after the actual printing to exclude the start-line from the result.
Notes:
The code rely on the fact that all AWK variables defaults to 0 or the empty string if not defined. This is valid, but it may not be best practice so you could add a BEGIN{found=0} to the start of the AWK expression.
If multiple start-end-blocks are found, they are all printed.
grep -A 10000000 'TERMINATE' file
is much, much faster than sed, especially working on really a big file. It works up to 10M lines (or whatever you put in), so there isn't any harm in making this big enough to handle about anything you hit.
Use Bash parameter expansion like the following:
content=$(cat file)
echo "${content#*TERMINATE}"
There are many ways to do it with sed or awk:
sed -n '/TERMINATE/,$p' file
This looks for TERMINATE in your file and prints from that line up to the end of the file.
awk '/TERMINATE/,0' file
This is exactly the same behaviour as sed.
In case you know the number of the line from which you want to start printing, you can specify it together with NR (number of record, which eventually indicates the number of the line):
awk 'NR>=535' file
Example
$ seq 10 > a #generate a file with one number per line, from 1 to 10
$ sed -n '/7/,$p' a
7
8
9
10
$ awk '/7/,0' a
7
8
9
10
$ awk 'NR>=7' a
7
8
9
10
If for any reason, you want to avoid using sed, the following will print the line matching TERMINATE till the end of the file:
tail -n "+$(grep -n 'TERMINATE' file | head -n 1 | cut -d ":" -f 1)" file
And the following will print from the following line matching TERMINATE till the end of the file:
tail -n "+$(($(grep -n 'TERMINATE' file | head -n 1 | cut -d ":" -f 1)+1))" file
It takes two processes to do what sed can do in one process, and if the file changes between the execution of grep and tail, the result can be incoherent, so I recommend using sed. Moreover, if the file doesn’t not contain TERMINATE, the first command fails.
Alternatives to the excellent sed answer by jfg956, and which don't include the matching line:
awk '/TERMINATE/ {y=1;next} y' (Hai Vu's answer to 'grep +A': print everything after a match)
awk '/TERMINATE/ ? c++ : c' (Steven Penny's answer to 'grep +A': print everything after a match)
perl -ne 'print unless 1 .. /TERMINATE/' (tchrist's answer to 'grep +A': print everything after a match)
This could be one way of doing it. If you know in what line of the file you have your grep word and how many lines you have in your file:
grep -A466 'TERMINATE' file
sed is a much better tool for the job:
sed -n '/re/,$p' file
where re is a regular expression.
Another option is grep's --after-context flag. You need to pass in a number to end at, using wc on the file should give the right value to stop at. Combine this with -n and your match expression.
This will print all lines from the last found line "TERMINATE" till the end of the file:
LINE_NUMBER=`grep -o -n TERMINATE $OSCAM_LOG | tail -n 1 | sed "s/:/ \\'/g" | awk -F" " '{print $1}'`
tail -n +$LINE_NUMBER $YOUR_FILE_NAME
I would like ignore all lines which occur before a match in bash (also ignoring the matched line. Example of input could be
R1-01.sql
R1-02.sql
R1-03.sql
R1-04.sql
R2-01.sql
R2-02.sql
R2-03.sql
and if I match R2-01.sql in this already sorted input I would like to get
R2-02.sql
R2-03.sql
Many ways possible. For example: assuming that your input is in list.txt
PATTERN="R2-01.sql"
sed "0,/$PATTERN/d" <list.txt
because, the 0,/pattern/ works only on GNU sed, (e.g. doesn't works on OS X), here is an tampered solution. ;)
PATTERN="R2-01.sql"
(echo "dummy-line-to-the-start" ; cat - ) < list.txt | sed "1,/$PATTERN/d"
This will add one dummy line to the start, so the real pattern must be on line the 1 or higher, so the 1,/pattern/ will works - deleting everything from the line 1 (dummy one) up to the pattern.
Or you can print lines after the pattern and delete the 1st, like:
sed -n '/pattern/,$p' < list.txt | sed '1d'
with awk, e.g.:
awk '/pattern/,0{if (!/pattern/)print}' < list.txt
or, my favorite use the next perl command:
perl -ne 'print unless 1../pattern/' < list.txt
deletes the 1.st line when the pattern is on 1st line...
another solution is reverse-delete-reverse
tail -r < list.txt | sed '/pattern/,$d' | tail -r
if you have the tac command use it instead of tail -r The interesant thing is than the /pattern/,$d' works on the last line but the1,/pattern/d` doesn't on the first.
How to ignore all lines before a match occurs in bash?
The question headline and your example don't quite match up.
Print all lines from "R2-01.sql" in sed:
sed -n '/R2-01.sql/,$p' input_file.txt
Where:
-n suppresses printing the pattern space to stdout
/ starts and ends the pattern to match (regular expression)
, separates the start of the range from the end
$ addresses the last line in the input
p echoes the pattern space in that range to stdout
input_file.txt is the input file
Print all lines after "R2-01.sql" in sed:
sed '1,/R2-01.sql/d' input_file.txt
1 addresses the first line of the input
, separates the start of the range from the end
/ starts and ends the pattern to match (regular expression)
$ addresses the last line in the input
d deletes the pattern space in that range
input_file.txt is the input file
Everything not deleted is echoed to stdout.
This is a little hacky, but it's easy to remember for quickly getting the output you need:
$ grep -A99999 $match $file
Obviously you need to pick a value for -A that's large enough to match all contents; if you use a too-small value the output will be silently truncated.
To ensure you get all output you can do:
$ grep -A$(wc -l $file) $match $file
Of course at that point you might be better off with the sed solutions, since they don't require two reads of the file.
And if you don't want the matching line itself, you can simply pipe this command into tail -n+1 to skip the first line of output.
awk -v pattern=R2-01.sql '
print_it {print}
$0 ~ pattern {print_it = 1}
'
you can do with this,but i think jomo666's answer was better.
sed -nr '/R2-01.sql/,${/R2-01/d;p}' <<END
R1-01.sql
R1-02.sql
R1-03.sql
R1-04.sql
R2-01.sql
R2-02.sql
R2-03.sql
END
Perl is another option:
perl -ne 'if ($f){print} elsif (/R2-01\.sql/){$f++}' sql
To pass in the regex as an argument, use -s to enable a simple argument parser
perl -sne 'if ($f){print} elsif (/$r/){$f++}' -- -r=R2-01\\.sql file
This can be accomplished with grep, by printing a large enough context following the $match. This example will output the first matching line followed by 999,999 lines of "context".
grep -A999999 $match $file
For added safety (in case the $match begins with a hyphen, say) you should use -e to force $match to be used as an expression.
grep -A999999 -e '$match' $file