I write a application use notifycation on winphone 8. My application require send URI continuous to server every 30 seconds. My problem, i used reminder of winphone, but it can't use webbrowser call request in reminder.
My code:
public MainPage()
{
InitializeComponent();
var reminder = new Reminder("MyReminder")
{
Content = "Sending uri to server...",
BeginTime = DateTime.Now.AddSeconds(30),
webBrowser1.Navigate(new Uri("http://nhomxe.vn/device_register?uri="http://...", UriKind.Absolute));
};
ScheduledActionService.Add(reminder);
}
I think you're misunderstanding what the Reminder class is for and how to use it.
The Reminder class will display a prompt to the user with a piece of shell UI and allow them to tap on it to open your app. (Similar to an Alarm which also displays UI and allows you to customize the sound that is played but doesn't support a direct link to the app.)
The code you have written doesn't compile because you are writing the code to execute inside the object initializer which won't work. You also appear to have a string concatenation issue but this may just be a spurious quote(").
If you just want to make a request to a URL endpoint you also don't need to load it in a browser.
Assuming that you're wanting to send a message to your server every 30 seconds while the app is running then you could just do this with a Timer.
Like this:
var timer = new Timer(
state => new WebClient().DownloadStringAsync(new Uri("http://blah.blah/")),
null,
TimeSpan.FromSeconds(30),
TimeSpan.FromSeconds(30));
Obviously add error handling, etc.
It is not possible to have your code run every 30 seconds when your app is not running. If you want to do something when your app is not in the foreground then you need to look at using Background Agents.
You can use periodic task if you want to fetch information every 30 mins.
Related
I'm trying to integrate the schedule component from Syncfusion. The component has a URL adaptor to connect to the controller; GetData() and Batch() for Crud Operations. Batch has a payload indicating what actions to perform. At the end, the Batch method would requery the database and send data identical to GetData() back.
Unfortunately, there is no built-in method to notify clients of anything going wrong - whether there is an exception, server-side validation kicks in or similar.
What I'd like to do is to add a placeholder outside the compentent to receive and display server messages (be it a notification popup, a or whatever.
Since I can't influence the Ajax call itself, I was wondering if I had to get started with SignalR (still in beta for .Net Core 2 as far as I know), or if I may have missed something more obvious? I have read a lot about push notifications etc - but these are not quite what I'm after, it'd be slightly over the top I think.
To summarise, let's say I have
<div id="messages"></div>
<div id="component">HereGoesTheScheduleWhichICantDoMuchWith</div>
Now in the Batch() method, it would be great to call a SendMessage("Sorry,you can't do this") - the text of which would ideally then appear in the messages-div.
How would you go about this?
I have now solved this, using SignalR (currently 1.0.0-alpha2-final) and for a nice view on the Client, PNotify.
Presently, it only works if the client is authenticated, if it needs to work anonymously you'd need to figure out a way to track SignalR's connection id.
On the page with the Syncfusion Schedule component, I connect to SignalR.
let connection = new signalR.HubConnection("/signalr", { transport: signalR.TransportType.ServerSentEvents });
connection.on("Notify",
(title, message) => {
new PNotify({
title: title,
text: message
});
});
connection.start();
The Hub (SignalRHub : Hub) creates a notification group for the user connecting:
public override Task OnConnectedAsync()
{
Groups.AddAsync(Context.ConnectionId, Context.User.Identity.Name);
return base.OnConnectedAsync();
}
The associated controller gets IHubContext<SignalRHub> signalRHub injected.
Now in the Batch-Method for the Syncfusion component, which returns Json and can't itself carry messages or notifications, you can notify the user:
_signalRHub.Clients.Group(User.Identity.Name).InvokeAsync("Notify", "A title", "A message");
In my particular case, I'm sending over an object to control layout, animation and popup duration for PNotify (e.g. longer for an exception to allow copy/paste etc) - as you please. Returning an object could be done using:
_signalRHub.Clients.Group(User.Identity.Name).InvokeAsync("Notify", JsonConvert.SerializeObject(new { title = "Some Title", message = "notification", type = "notice"}););
Obviously, connection.on("Notify"... needs to be changed accordingly.
I hope this is clear enough and might help someone else.
I would like to start a service that once in awhile on all platforms has checked is there a notification to appear or not. Is there any nuget to connect all platforms or some examples?
You can use the Device.StartTimer(TimeSpan minutes) method to start a background task that will repeat after the given time span. Here is a code example:
var minutes = TimeSpan.FromMinutes (3);
Device.StartTimer (minutes, () => {
// call your method to check for notifications here
// Returning true means you want to repeat this timer
return true;
});
This is included with Xamarin Forms, so you don't need any platform specific logic.
http://iosapi.xamarin.com/index.aspx?link=M%3AXamarin.Forms.Device.StartTimer(System.TimeSpan%2CSystem.Func%7BSystem.Boolean%7D)
I think that the best that you can do is following:
Unfortunately, the way that these two platforms have evolved to handle executing background code is completely different. As such, there is no way that we can abstract the backgrounding feature into the Xamarin.Forms library. Instead, we going to continue to rely on the native APIs to execute our shared background task.
Further information for this topic can be found here:
https://robgibbens.com/backgrounding-with-xamarin-forms/
We have a ASP.Net application that has been given a 20 minute sliding expiry for the session (and cookie).
However, we have some AJAX that is polling the server for new information. The downside of this of course is that the session will continue indefinitely, as it is being kept alive by the polling calls causing the expiry time to be refreshed. Is there a way of preventing this - i.e. to only allow the session to be refreshed on non-ajax calls?
Turning off sliding expiry is not really an option as this is an application that business users will be using for most of their day between telephone calls.
Other Stackoverflow discussions on this talk about maintaining 2 separate application (one for authenticated calls, one for unauthenticated. I'm not sure this will be an option as all calls need to be authenticated.
Any ideas?
As this question is old I am assuming it has been resolved or a workaround implemented. However, I wanted to mention that instead of AJAX polling the server to perform an operation we have utilized SignalR which allows both the client to communicate with the server via JQuery and/or the server to notify the client.
Check it out: Learn About ASP.NET SignalR
add below code to your controller action that you are reference for polling.Convert this into an attribute so it can be used everywhere. This line will not extend session timeout
[HttpPost]
public ActionResult Run()
{
Response.Cookies.Remove(FormsAuthentication.FormsCookieName);
return Json("");
}
There is no way to stop the ajax from keeping the session and cookies alive!
However, there is a way to achieve what you want to do. That is if the process I will describe will be ok to you.
I think what you really want to achieve is first to refresh your page with ajax so that some processes will be active and running. Also to know when the user has stopped operating the program.
If that is what you want then there is a simple process to achieve this
You will have your ajax running for the things you want to run.
You will remove the session you want to check if user has stopped operation on the page and manage the session as a variable instead.
The variable can be a global variable or a class variable that will be set to initial value whenever the user clicks an element on the page.
(You will select the click event of an element and set the variable to initial value)
You will increment the variable every given time (say every time your ajax runs)
You will also have a function/method run to check the value of that variable if it is greater than the value you set as limit. This can run every time your ajax runs or every time you want it to run (timed event).
If the value of your variable is greater than the limit set it should invalidate or clear session/log user out.
This way if user stops operating (clicking elements) the system on any page that this is running will eventually log out the current user and stop running the program.
I have done this by creating a hidden page in an i-Frame. Then using JavaScript it posts back every 18 minutes to keep the session alive. This works really well.
This example is from a ASP.NET Forms project but could be tweaked for MVC.
Create a page called KeepSessionAlive page and add a meta refresh tag
meta id="MetaRefresh" http-equiv="refresh" content="21600;url=KeepSessionAlive.aspx"
In the code behind
protected string WindowStatusText = "";
protected void Page_Load(object sender, EventArgs e)
{
//string RefreshValue = Convert.ToString((Session.Timeout * 60) - 60);
string RefreshValue = Convert.ToString((Session.Timeout * 60) - 90);
// Refresh this page 60 seconds before session timeout, effectively resetting the session timeout counter.
MetaRefresh.Attributes["content"] = RefreshValue + ";url=KeepSessionAlive.aspx?q=" + DateTime.Now.Ticks;
WindowStatusText = "Last refresh " + DateTime.Now.ToShortDateString() + " " + DateTime.Now.ToShortTimeString();
}
Add the hidden iFrame in a master page
iframe ID="KeepAliveFrame" src="KeepSessionAlive.aspx" frameBorder="0" width="0" height="0"
Download example
I am new to Windows Phone 8 development and I'm trying to use the GeoCoordinateWatcher class to easily get the latitude and longitude of the user.
My problem is that I want to manage a timeout (the user will be able to customize its value).
I thought the "TryStart(...)" method would help me to do that, but:
tryStart(false, TimeSpan.FromSeconds(10)); => The watcher starts after 10sec
tryStart(false, TimeSpan.FromSeconds(2)); => The watcher starts after 2sec
This method is, for me, pointless as I want the GeoCoordinateWatcher to start immediately (so I'm using the basic method "Start()", but I also want to return an exception like "The timeout has expired" if it takes more than xxx seconds to return coordinates.
Is there an easy way to do that ? Do I have to create a timer or something like that ?
Thanks a lot for your help
If you are using Windows Phone 8, you should use Geolocation API which is a part of Windows Phone Runtime
http://msdn.microsoft.com/en-us/library/windowsphone/develop/windows.devices.geolocation.geolocator.getgeopositionasync.aspx
This provides a simple / easy way to get location without mucking around.
You might want to go through my verbose blog post on possible issues.
http://invokeit.wordpress.com/2013/05/01/geolocator-and-movementthreshold-wpdev-win8dev/
I have a simple viewPart offering some text fields to enter parameters for a selenium test. After filling out these fields the user may start the test which approx. needs 30-45 minutes to run. I want my GUI to be alive during this test giving users the chance to do other things. I need a progress monitor.
I tried to put the selenium test in a job containing Display.getDefault().asyncExec to run it. But my GUI freezes after some seconds giving the busyindicator. The selenium does not update any other view but the progress monitor.
Is there another way to ensure that the job wont block my GUI?
Best,
Mirco
Everything executed in (a)syncExec is using the display thread and therefore blocking your UI until it returns. I suggest you use Eclipse Jobs. This will use the progress indicator that the workbench already offers out of the box.
I would suggest to split your code into code that updates the UI and the code that executes other business. Execute all of it in a separate thread, and when you need to retrieve or set some action to the UI then use the "Display.getDefault().asyncExec".
Thread thread = new Thread("Testing") {
// some shared members
public void run() {
someBusiness();
// or use syncExec if you need your thread
// to wait for the action to finish
Display.getDefault().asyncExec(new Runnable() {
#Override
public void run() {
// UI stuff here
// data retrieval
// values setting
// actions trigging
// but no business
}
});
someBusiness();
};
thread.start();