When I show any of my solutions' properties and navigate to Common Properties -> Debug Source Files, all I see is the list of projects and their configurations, the same as the Configuration Properties -> Configuration settings. According to #HansPassant below, this is the Configuration Manager that's showing up in both places. As I change back and forth between the two settings, all that changes is the three controls (Configuration, Platform, "Configuration Manager...") at the top of the window are disabled when I'm in "Debug Source Files". I've provided screenshots at the bottom of the question.
I restarted Visual Studio, removed my old and new .suo files, and confirmed that a teammate sees the same behavior for an entirely different solution. These solutions all worked fine under 2013 and earlier. How can I get this back? It's preventing me from setting breakpoints on external code.
Update
I did a repair of Visual Studio 2015, and the required system restart, and it didn't make a difference.
Update 2
I did a complete uninstall (which took multiple attempts, and eventually uninstalling from a system account), and reinstall, as well as installing all important (and most optional) Windows updates. There is still no difference.
After working with Microsoft support, we landed on the solution (which I asked them to pass along as a bug): you need to install the Common Tools for Visual C++ 2015. You can modify your installation to add this, and (for me) it didn't require a machine restart.
I'm running Visual Studio 2013 Pro (RTM version) on my formatted PC (Windows 8.1 fresh install).
I don't know why, but Visual Studio 2013 Pro is very very slow! Slow for building, debugging, navigating in the IDE... my hard disk drive LED is not lighting up at all!
I'm on a little MFC (C++) project using the Boost library.
Any ideas?
It is something concerned with the graphics drivers. If you update them you will be fine.
Or you can disable the hardware graphics acceleration in Visual Studio according to these steps:
In Visual Studio, click "Tools", and then click "Options".
In the Options dialog box, navigate to the "Environment > General" section and clear the "Automatically adjust visual experience based on client performance" check box. (Refer to the following screen shot for this step.)
Clear the "Use hardware graphics acceleration if available" check box to prevent the use of hardware graphics acceleration.
Select or clear the "Enable rich client visual experience" check box to make sure that rich visuals are always on or off, respectively. When this check box is selected, rich visuals are used independent of the computer environment. For example, rich visuals are used when you run Visual Studio locally on a rich client and over remote desktop.
References:
You experience performance issues, product crashes, or rendering issues in Visual Studio 2013
Try to set Current source control plug-in to None (menu Tools → Options → Source Control), if you are using the Microsoft Git provider, which seems to slow Visual Studio 2013 down more and more the larger the repository gets.
I had the whole Dojo Toolkit framework under source control using the Microsoft Git provider, and it got to the point where there were delays from the time I hit a key to the time the glyph would appear on the screen. That bad.
When/if you need Git again, you can switch to the TortoiseGit provider or Git-Extensions, both will work without slowdown. I like Git-Extensions, personally.
I too have struggled a bit with bad performance in Visual Studio 2013 (Premium). Pretty much the same issues as TS had. Slow navigation, scrolling, building... just about everything. Luckily I have manage to solve my own problem by disabling Synchronized Settings in Visual Studio.
Go to menu Tools → Options → Environment-Synchronized Settings and remove this option by unchecking the checkbox.
In the case of web applications, another cause of slow building and debugging (but not IDE navigation) could be the Browser Link feature.
I found that with this switched on, building would take 4 times longer and debugging was painful - after every postback, web pages would freeze for a few seconds before you could interact with them.
I was using a solution upgraded from Visual Studio 2012. Visual Studio 2013 also upgraded the .suo file. Deleting the solution's .suo file (it's next to the .sln file), closing and re-opening Visual Studio fixed the problem for me. My .suo file went from 91KB to 27KB.
I had the same problem and the only solution that worked for me was to follow the three steps presented below:
Clean the WebSiteCache folder (you may find it at
C:\Users\%USERNAME%\AppData\Local\Microsoft\WebSiteCache)
Clean the "Temporary ASP.NET Files" folder (find it at
C:\Users\%USERNAME%\AppData\Local\Temp\Temporary ASP.NET Files)
Restart Visual Studio
What fixed it for me was disabling Git by setting Current source control plug-in to None in Visual Studio, menu Options → Source Control:
This issue seems to be because of uninstalling the SQL Server Compact edition (4.0).
I was having this issue, and it got fixed after installing the SQL Server Compact edition 4.0.
On closing Visual Studio 2013, I was getting a message to install SQL Server Compact edition as a C++ project needed some thing... can't put finger on anything.
Resolve this issue by installing Microsoft SQL Server Compact 4.0
Microsoft SQL Server Compact 4.0
I can advise an option like this.
CodeLens can be disabled like as at the picture. It gives a lot of performance goodness.
If you are debugging an ASP.NET website using Internet Explorer 10 (and later), make sure to turn off your Internet Explorer 'LastPass' password manager plugin. LastPass will bring your debugging sessions to a crawl and significantly reduce your capacity for patience!
I submitted a support ticket to Lastpass about this and they acknowledged the issue without any intention to fix it, merely saying: "LastPass is not compatible with Visual Studio 2013".
I had the same problem and all the solutions mentioned here didn't work out for me.
After uninstalling the "Productivity Power Tools 2013" extension, the performance was back to normal.
One more thing to check; for me it was Fusion logging.
I'd turned this on a very long time ago and more or less forgotten about it. Getting rid of the 5000+ directories and 1 GB of logged files worked wonders.
There is a good workaround for this solution if you are experiencing slowness in rendering the .cs files and .cshtml files.
Just close all the files opened so that the cache gets cleared and open the required files again.
Visual Studio Community Edition was slow switching between files or opening new files. Everything else (for example, menu items) was otherwise normal.
I tried all the suggestions in the previous answers first and none worked. I then noticed it was occurring only on an ASP.NET MVC 4 Web Application, so I added a new ASP.NET MVC 4 Web Application, and this was fast.
After much trial and error, I discovered the difference was packages.config - If I put the Microsoft references at the top of the file this made everything snappy again.
Move the Microsoft* entries to the top.
It appears you don’t need to move them all - moving say <package id="Microsoft.Web.Infrastructure" has an noticeable effect on my machine.
As an aside
Removing all contents of the file makes it another notch faster too*
Excluding packages.config from Visual Studio does not fix the issue
A friend using Visual Studio 2013 Premium noticed no difference in either of these cases (both were fast)
UPDATE
It appears missing or incomplete NuGet packages locally are the cause. I opened the Package manager and got a warning 'Some NuGet packages are missing from this solution' and choose to Restore them and this sped things up. However I don’t like this as in my repository I only add the actual items required for compilation as I don’t want to bloat my repository, so in the end I just removed the packages.config.
This solution may not suit your needs as I prefer to use NuGet to fetch the packages, not handle updates to packages, so this will break this if you use it for that purpose.
For me, the problem was the Start page -- it was downloading content and causing Visual Studio to hang.
The only solution for me was to:
Kill the DevEnv process from Task Manager
Start Visual Studio in Safe Mode from the command line:devenv.exe /safemode
Go to menu Tools → Options, and select the Environment/Startup options
Choose "Show empty environment" for the startup action
Close Visual Studio
Restart normally
Running unit tests was slow. It was a ReSharper issue.
Menu ReSharper → Options → Environment → General ... Clear Caches
Menu Tools → Options → ReSharper → General ... Suspend Now
Close Visual Studio
Delete the .suo file.
Open Visual Studio again.
Re-enable ReSharper.
I also had an issue with a slow IDE.
In my case I installed
ReSharper
Npgsql (low chance to cause the problem)
Entity Framework Power Tools Beta 4
The following helped me a bit:
Disabled synchronization - menu Tools → Options → Environment-Synchronized Settings
Disabled plug-in selection - menu Tools → Studio → Options → Source Control.
Disabled Entity Framework Power Tools Beta 4 - menu Tools → Extensions and Updates
Uninstalled JetBrain's Resharper - WOW!! I am fast again!!
Change the Fusion Log Value to 0. It solved my issue.
This is the FusionLog key in the registry:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fusion
Check ForceLog value (1 enabled, 0 disabled).
I was also facing this issue for quite long time. Below are the steps that I perform, and it works for me always:
Deleting the solution's .suo file.
Deleting the Temporary ASP.NET Files (You can find it at find it at %WINDOW%\Microsoft.NET\Framework\Temporary ASP.NET Files)
Deleting all breakpoints in the application.
Visual Studio 2013 has a package server running, and it was spending up to 2 million K of memory.
I put it to low priority and affinity with only one CPU, and Visual Studio ran much more smoothly.
Performance Explorer
Have you been using menu Analyze → Performance and Diagnostics? I have! It's awesome! But you may want to clean up.
Open the Performance Explorer. If you collapse all of the items in there, select all, then you can right click and do Delete.
My solution opens faster and is in general running much faster now.
Also you may notice changes to your sln file as shown. For me, this section was deleted from the sln.
GlobalSection(Performance) = preSolution
HasPerformanceSessions = true
EndGlobalSection
In Visual Studio 2015 Community edition, I've experienced a very (very) slow IDE after changing the "Environment Font" on menu Tools → Options... → Fonts and Colors.
Reverting this options back to the default value ("automatic") solved it immediately.
I had similar problems when moving from Visual Studio 2012 → Visual Studio 2013. The IDE would lock up after almost every click or save, and building would take several times longer. None of the solutions listed here helped.
What finally did help was moving my projects to a local drive. Visual Studio 2012 had no problems storing my projects on a network share, but Visual Studio 2013 for some reason couldn't handle it.
I had a Visual Studio 2013 installed, and it was running smoothly. At some point it started to get sluggish and decided to install Visual Studio 2015. After install, nothing changed and both versions were building the solution very slow (around 10 minutes for 18 projects in solution).
Then I have started thinking of recently installed extensions - the most recent installed was PHP tools for Visual Studio (had it on Visual Studio 2013 only). I am not sure how can an extension affect other versions of Visual Studio, but uninstalling it helped me to solve the problem.
I hope this will help others to realize that it is not always Visual Studio's fault.
I added "devenv.exe" as an exclusion to Windows Defender. This solved my problem completely. People can try this as their first try.
I have the same problem, but it just gets slow when trying to stop debugging in Visual Studio 2013, and I try this:
Close Visual Studio, then
Find the work project folder
Delete .suo file
Delete /obj folder
Open Visual Studio
Rebuild
None of the suggestions worked for me, but I did solve my problem. I had tried most of the other recommendations before coming to the following solution.
My Scenario/Problem:
Using Visual Studio 2017 with ReSharper Ultimate. Keyboard input in the IDE got super slow as others have described. The last change I made to my solution was to add a new web site project, so I looked into that. After trying a lot of things, I tried adding a second web site project, so I could try to replace the first one, and Visual Studio just tanked after that. It wouldn't even load the solution anymore.
My Solution:
I forced Visual Studio closed and then I removed the newly added web site project(s) from the .sln file using Notepad. After saving and starting Visual Studio, my solution loaded quickly and everything seemed to be back to normal. I added a new Web Site with a slightly different configuration (see the thinking below), and the problem did not present itself again.
My Thinking:
I think the problem stemmed from creating the new web site project and using a file system path to a network share that is hosted in Azure. I'm working over VPN which tends to slow things down, and I occasionally experience various routing problems with some services, so my problem/solution might be a bit of a snowflake. I changed the file system path to be a local repository and will publish the files as needed which seems like a much better way to go.
I had a Visual Studio behavior where the typing was slow for my HTML files. Previously when I installed, I guessed that because my HTML files were generic HTML that the need to install any web development tools from the workload component of the installer was unnecessary. I went back and installed this bit and Visual Studio behavior became as I expected it.
This already has a bunch of answers here, but a general way to easily boost Visual Studio is to clear your temp files.
Press the Windows Key and R, and enter 'temp'. Press enter, and provide any administrator permission if you need to. Then press Control A to select all, and hit the Del key. Remember to provide any administrator permissions, and if 'the item is already in use' then just press skip.
After this, Press Windows Key and R again, but this time type '%temp%'. Repeat the previous steps in the new directory.
Finally, empty the recycle bin.
This might not help a ton, but it should boost general performance.
I have a machine on which I had to use VS2010 for a project. I installed the project's VS settings (color scheme, formatting etc.) so that I'd be using the same environment as the other developers on the project.
I subsequently installed VS2012 for my own use - it picked up the settings (color, formatting) from the VS2010 install.
I then installed ReSharper into both.
I now want to remove the project's settings from my VS2012, while leaving them in the VS2010 install - I am still working on their project.
I was going to reset VS2012 to its default settings but I don't want to lose the changes that ReSharper makes.
Is there a way to do this, or do I have to uninstall ReSharper from VS2012 (or both if need be), reset the VS default settings, then resinstall ReSharper?
It's a hard question, since ReSharper is storing its keyboard shortcuts and fonts/colors settings among VS ones, though all other settings are stored separately (ReSharper | Manage Options...)
You may back up all R# settings in 'Manage options...' dialog. However, if you are going to import/export VS keyboard and fonts settings, VS won't allow you to select only resharper- prefixed options.
Hope this info helps, however I'm not sure if it suitable for you or not...
Thanks.
Alex Berezoutsky,
Senior Support Engineer,
JetBrains, Inc.
"Develop with pleasure!"
I am developing my minor and major project in VS2008. Suddenly tools have started to go missing from my toolbar. I have visited several forums but am not able to solve the problem.
Basically I have silverlight 2.0 installed with SDK, and tools and all.
Now when I need to access the media element control from silverlight it does not display.
Further more on listing all controls I can see those controls but they are disabled.
Please Help Me out.
Regards
Shrey Mishra
try it:
Reset all setting in tools -> Import and Export Setting menu
Or
2 You should update your VS 2008 SP1 with . NET 3.5
Hope this help,
I am not too sure, but it has something to do with the references in the project. I have the same problem with some of my projects when i started adding references to many assemblies.
When you reset the toolbox ,does it work ? On my computer, whenever I reset the toolbox, the icons come back only to disappear some time later after rebuilding the application many times.
Icons should not disappear from anywhere other than your toolbox.
Had the same problem:
Reset all setting in Tools -> Import and Export Setting menu
helped nicely))
It's weird but I was able to solve the problem by simply removing USB Mouse .:)
When i checked this out with some others developing on their laptops it came to me that it happens with very few of us in VS 2008 but still can drive on mad.
I have this problem where I open Visual Studio and the internal windows are scattered all over the place. None of them are docked; some that should be visible have become invisible and vice versa. I then have to spend ages getting the windows back where I like them.
It only seems to happen with some solutions and only appeared recently.
For the life of me I can't fix the problem. Has anyone else been through this?
Sounds like there is definitely a problem with Visual Studio retaining your settings between round-trips and possibly your Visual Studio settings profile in general.
The solution I'd recommend is firstly to reset all settings, secondly customize things to your personal preference and finally take a backup of those customized settings. The idea is that this settings backup file can be used later to automate a quick settings restore to a point you are happy with. The following steps show how to do this and hopefully should sort out even the most confused Visual Studio setting issues:
Close down all instances of Visual Studio.
Go to Start > Programs > Visual Studio 200X > Visual Studio Tools > and choose 'Visual Studio 200X Command Prompt'
Run the sligthly less well known 'devenv.exe /ResetUserData' command. With this command you will lose all of your Visual Studio environment settings and customizations. Because of this, the /ResetUserData switch is not officially supported and Microsoft does not advertise it (the switch is not described in the help for devenv.exe you get when you type devenv.exe /? in a command prompt). Importantly, wait for the resulting devenv.exe process to disappear from Task Manager or even better Process Explorer.
When the process disappears from Task Manager or Process Explorer, run 'devenv.exe /ResetSettings' which will restore the IDE's default settings and eventually start a single instance of Visual Studio.
Now in Visual Studio choose 'Import and Export Settings...' near the bottom of the 'Tools' menu to start the Import and Export Settings Wizard.
Choose 'Reset all settings' radio button and Next > Choose 'No, just reset settings, overwriting my current settings' and Next > Choose your personal 'Settings Collection' preference, I would choose Visual C# Development Settings here (Note: What you choose here has an effect on keyboard shortcuts etc. but you can always repeat this process until happy) and click Finish.
When you get the message that 'Your settings were successfully reset to XXXXXX Development Settings.' click Close then spend a good bit of time adding any personal customizations to Visual Studio such as opening windows you always want open, customizing toolbars and adding any toolbar buttons etc.
When you are finished with your personal customization and completely happy with your setup go again to Tools > 'Import and Export Settings...'
Choose 'Export selected environment settings' radio button and Next > Tick 'All Settings' and Next > Choose a file name and directory and click Finish to store a backup of your current settings in a .vssettings file.
In future if things go haywire again head back to Tools > 'Import and Export Settings...' and this time choose 'Import selected environment settings' radio button and Next > Choose 'No, just import new settings, overwriting my current settings' and Next > Either choose the name of your .vssettings file from the list (usually under the My Settings folder) or Browse.. to where you saved the file and Next > Tick 'All Settings' and click Finish.
Importantly, close the single instance of Visual Studio. Any future instance you open should retain your latest customizations.
Visual Studio corrupts its settings with regular monotony (always has done, I've been suffering from this since the Visual C++ days, and it's still a bugbear in VS2013).
Often this seems to be totally at random, but it's highly probable after a crash.
It will also lose any changes to your settings if Visual Studio doesn't shut down cleanly - for some reason instead of saving back the settings when you OK the dialog, VS seems to wait until it quits to write back your changes, so after changing options I always quit and restart to ensure the changes have been flushed to disk. Similarly you should never change options with 2 or more instances of VS running, as the last one to quit will overwrite the settings.
In particular, there is an easily reproducible case: If you launch two or more copies at the same time (by which I mean if you start up two or more copies, so they are all initialising at the same time), they seem to fight over the settings file and it becomes corrupted or resets to defaults.
The best two workarounds I've found are:
Never launch more than one instance at a time. If you need to run several instances concurrently, then wait for the first one to finish loading its Solution before you start to launch the next.
Always use Tools > Import and Export Settings to save your settings to a backup file, so that recovering from this corruption only takes a few seconds each time it happens.
Another smaller, but still rather irritating habit is that if VS is minimised when it is quit (e.g. by shutting down), it corrupts its window position information and the next time you run it, it will be maximised.
I had a similar issue when the My Documents folder was stored on a mapped drive. If I opened VS before mapping the drive, VS would act as if it was the first time it had been opened. I solved this issue by storing the environment settings on the local disk.
I just ran into this problem too (seemed to trigger after a windows update) where I kept getting some bogus window layout no matter what I did. The above suggestions didn't work either. But luckily the suggestions in: Why doesn't VS 2008 IDE remember my preferences? of deleting:
%APPDATA%\Application Data\Microsoft\VisualStudio\9.0\windows.prf
worked.
TP
Actually I worked out what the culprit was: previous VS crashes.
If one of my Visual Studio instances crashes for whatever reason - the next time I start up VS, I get a weird batch of settings. The behaviour depends on various factors, like whether or not I had other instances of VS open at the time.
I tried Peter McG's solution, still didn't help.
What ended up working for me was to delete my VS Solution User Options (.sou). Located in the same directory as my solution.
Only bad thing is you have to redo all of your settings. This included my exception changes. Not to much to change, but if you have a lot of customization it could be a real pain.
There must be something in that file messing everything up, but deleting the whole file is quick and easy.
Which solution you're opening shouldn't matter because those settings are not solution-specific. But I wonder do you maybe have Visual Studio 2005 and 2008 installed? If so, opening a solution created in 2005 will open VS 2005 and opening a 2008 solution will open VS 2008. You may have VS 2005 even if you didn't install it. For example, InfoPath 2007 installs a VS 2005 shell.
First I would position the windows where you want them, then do a Tools -> Export Settings and include only the window layouts. That way you at least have something you can revert to.
Then I would check Tools -> Options -> Import Export Settings and make note of where the "Automatically Save My Settings To This File" path is set to. Keep an eye on that file. Do you have any sync software that may be inadvertently overwriting it? Does it point to a non-existing location?
My issue is similar, but the result is the app crashes. The problem was this value
In HKEY_CURRENT_USER\Software\Microsoft\VisualStudio\11.0\MainWindow. It was set to "0 1000 -280 -100 3" probably due to having multiple screens and moving the UI around a lot.
Deleting this value allowed the app to restart successfully. It gets recreated on startup.
I'm facing similar issue. And it also only started recently, like, within the last 30 days or so. The only thing I remember changing in this period was updating Resharper 4.5.
I have experienced something similar. In my case the text editor colors (c# editor for example) are going haywire. The only solution that I tried and works for me is change color theme so something else and then back to what I want.
In my case its not the Window layout being corrupted but Intellisense offering code completion and pop-up help. Never had this issue for the last decade, now it happens 3 times a day at least. Win8.1, Visual Studio 2013, ReSharper 8 and now ReSharper 9 (in hopes the upgrade would fix it).
I now routinely have to
close the solution,
Tools/Import-Export Settings/Reset all settings
Close Visual Studio
Open Visual Studio Import my saved settings
RE-open the solution and continue working
I can then work fine again for quite some time until something goes awry... lets say a stack-overflow while I'm debugging. At that point I just know my settings are screwed and my Intellisense is dead again.
I'm starting to wonder if it isn't something to do with a latest Visual Studio update. There are things in there I never use like the advertising crap and Office development integration. MS Office has its own issues, like Office 64 bit not being seen by any other application such as Quicken as an installed email program. Or maybe its a conflict with ReSharper which wants to overtake and 'extend' the Intellisense feature.
Either way, I'm sure its a different manifestation of the same issue: Visual Studio settings are going sideways during normal use.
I just came across this issue in VS 2012, reset window layout was doing nothing.
I extrapolated
%APPDATA%\Application Data\Microsoft\VisualStudio\9.0\windows.prf
to
%appdata%\Microsoft\VisualStudio\11.0\Windows.index
... deleted it and was back in business!
Make sure you close all instances of VS first!