When I use ssh to run command on a remote machine, I will get the output from shell. However, if I add
sudo su - user2
I will get no output. Now, I cannot do
ssh user2#host
Because of some permission issue.
Is there any way to get the output for the following command?
ssh user1#host 'sudo su - user2; wc -l tmp.txt'
Thanks to #laenkeio. Using sudo -u user2 can run some simple programs.
However, when I need to call a python script which needs some enviroment variable for user2, the script was not able to find those default path by using sudo -u user2.
If you have the appropriate sudo rights on host you should be able to do it with:
ssh -t user1#host 'sudo -u user2 wc -l tmp.txt'
Using sudo -u means "execute as user2", thus avoiding the extra su -. And -t forces ssh to allocate a tty so that sudo can ask for your password.
If you cannot do ssh user2#host for some permission issue, you'll not be able to run ssh user1#host 'sudo su - user2; ... for the same reason...
And, even with no permission issue, when doing su - user you'll be requested for a password...
I have a minor complex command using a pipe
python3 wlan.py -p taken | awk '{$10 = sprintf( "%.1f", $10 / 60); print $4 $6 $8 $10 ",min"}' | awk '{gsub(/,/," ");print}' >> /tmp/missed.log
and I get a permission error if this command is executed from a program but not from the command line (sudo). So, obviously there is an issue with the rights of the program. I have set the rights of python and awk to 777 to no avail. But the main question is: What are the rights of the >> command and how can I change them?
the error message is "writing missed.log - permission denied".
File access in a Unix-like environment is tied to who you are, not what programs you run.* When you run sudo python3 ..., you are changing who you are to a more privileged user for the duration of the python3 command. Once Python stops running, you are back to your normal self. Imagine that sudo is Clark Kent taking off his glasses and putting on his cape. Once the badguys have been defeated, Superman goes back to an ordinary Joe.
Your error message indicates your normal user account does not have the necessary permissions to access / and /tmp, and to write /tmp/missed.log. The permissions on wlan.py and /usr/bin/python3 aren't the issue here. I can think of four options (best to worst):
Put the output file somewhere other than in /tmp. You should always be able to write your home directory, so you should be able to run without sudo, with > ~/missed.log instead of > /tmp/missed.log.
When you run your pipeline "from a program," as you said, just include the sudo as if you were running it from the command line. That way you get consistent results.
Add yourself to the group owning /tmp. Do stat -c '%G' /tmp. That will tell you which group owns /tmp. Then, if that group is not root, do usermod -a -G <that group name> <your username>.
Change the permissions on /tmp. This is the bludgeon: possible, but not recommended. sudo rm -f /tmp/missed.log and sudo chmod o+rwx /tmp should make it work, but may open other vulnerabilities you don't want.
* Ignoring setuid, which doesn't seem to be the case here.
I have a jenkins job, which has its own set of build servers. The process which i follow is building applications on the jenkins build server and then I use "send files or execute commands over ssh" to copy my build and deploy the same using a shell script.
As a part of the deployment commands, I have quite a few steps to be done, like mkdir, tar -xzvf etc.I want to execute these deployment steps with a specific user "K". But when i type the sudo su - k command, the jenkins job fails because i am unable to feed the password to it.
#!/bin/bash
sudo su - K << \EOF
cd /DIR1/DIR2;
cp ~/MY_APP.war .
mkdir DIR 3
tar -xzvf MY_APP.war
EOF
To handle that, I used a PASSWORD parameter and made the build as parameterized, so that i can use the same PASSWORD in the shell script.
I have tried to use Expect, but looks like commands like cd, tar -xzvf are not working inside it and even if they work they will not be executed with the K as a user since the terminal may expire(please correct if wrong).
export $PASSWORD
/usr/bin/expect << EOD
spawn sudo su - k
expect "password for K"
send -- "$PASSWORD"
cd /DIR1/DIR2;
cp ~/MY_APP.war .
mkdir DIR 3
tar -xzvf MY_APP.war
EOD
Note: I do not have the root access to the servers and hence cannot tweak the host key files. Is there a work around for this problem?
Even if you get it working, having passwords in scripts or on the command line probably is not ideal from a security standpoint. Two things I would suggest :
1) Use a public SSH key owned by the user on your initiating system as an authorized key on the remote system to allow logging as the intended user on the remote system without a password. You should have all you need to do that (no root access required, only to the users you already use on each system).
2) Set-up the "sudoers" file on the remote system so that the user you log in as is allowed to perform the commands you need as the required user. You would need the system administrator help for that.
Like so:
SUDO_PASSWORD=TheSudoPassword
...
ssh kilroy#somehost "echo $SUDO_PASSWORD | sudo -S some_root_command"
Later
How can i use this in the 1st snippet?
Write a file:
deploy.sh
#!/bin/sh
cd /DIR1/DIR2
cp ~/MY_APP.war .
mkdir DIR 3
tar -xzvf MY_APP.war
Then:
chmod +x deploy.sh
scp deploy.sh kilroy#somehost:~
ssh kilroy#somehost "echo $SUDO_PASSWORD | sudo -S ./deploy.sh"
I am trying to compile some sources using a makefile. In the makefile there is a bunch of commands that need to be ran as sudo.
When I compile the sources from a terminal all goes fine and the make is paused the first time a sudo command is ran waiting for password. Once I type in the password, make resumes and completes.
But I would like to be able to compile the sources in NetBeans. So, I started a project and showed netbeans where to find the sources, but when I compile the project it gives the error:
sudo: no tty present and no askpass program specified
The first time it hits a sudo command.
I have looked up the issue on the internet and all the solutions I found point to one thing: disabling the password for this user. Since the user in question here is root. I do not want to do that.
Is there any other solution?
Granting the user to use that command without prompting for password should resolve the problem. First open a shell console and type:
sudo visudo
Then edit that file to add to the very end:
username ALL = NOPASSWD: /fullpath/to/command, /fullpath/to/othercommand
eg
john ALL = NOPASSWD: /sbin/poweroff, /sbin/start, /sbin/stop
will allow user john to sudo poweroff, start and stop without being prompted for password.
Look at the bottom of the screen for the keystrokes you need to use in visudo - this is not vi by the way - and exit without saving at the first sign of any problem. Health warning: corrupting this file will have serious consequences, edit with care!
Try:
Use NOPASSWD line for all commands, I mean:
jenkins ALL=(ALL) NOPASSWD: ALL
Put the line after all other lines in the sudoers file.
That worked for me (Ubuntu 14.04).
Try:
ssh -t remotehost "sudo <cmd>"
This will remove the above errors.
After all alternatives, I found:
sudo -S <cmd>
The -S (stdin) option causes sudo to read the password from the standard input instead of the terminal device.
Source
Above command still needs password to be entered. To remove entering password manually, in cases like jenkins, this command works:
echo <password> | sudo -S <cmd>
sudo by default will read the password from the attached terminal. Your problem is that there is no terminal attached when it is run from the netbeans console. So you have to use an alternative way to enter the password: that is called the askpass program.
The askpass program is not a particular program, but any program that can ask for a password. For example in my system x11-ssh-askpass works fine.
In order to do that you have to specify what program to use, either with the environment variable SUDO_ASKPASS or in the sudo.conf file (see man sudo for details).
You can force sudo to use the askpass program by using the option -A. By default it will use it only if there is not an attached terminal.
Try this one:
echo '' | sudo -S my_command
For Ubuntu 16.04 users
There is a file you have to read with:
cat /etc/sudoers.d/README
Placing a file with mode 0440 in /etc/sudoers.d/myuser with following content:
myuser ALL=(ALL) NOPASSWD: ALL
Should fix the issue.
Do not forget to:
chmod 0440 /etc/sudoers.d/myuser
Login into your linux. Fire following commands. Be careful, as editing sudoer is a risky proposition.
$ sudo visudo
Once vi editor opens make the following changes:
Comment out Defaults requiretty
# Defaults requiretty
Go to the end of the file and add
jenkins ALL=(ALL) NOPASSWD: ALL
If by any chance you came here because you can't sudo inside the Ubuntu that comes with Windows10
Edit the /etc/hosts file from Windows (with Notepad), it'll be located at: %localappdata\lxss\rootfs\etc, add 127.0.0.1 WINDOWS8, this will get rid of the first error that it can't find the host.
To get rid of the no tty present error, always do sudo -S <command>
This worked for me:
echo "myuser ALL=(ALL) NOPASSWD:ALL" >> /etc/sudoers
where your user is "myuser"
for a Docker image, that would just be:
RUN echo "myuser ALL=(ALL) NOPASSWD:ALL" >> /etc/sudoers
In Jenkins:
echo '<your-password>' | sudo -S command
Eg:-
echo '******' | sudo -S service nginx restart
You can use Mask Password Plugin to hide your password
Make sure the command you're sudoing is part of your PATH.
If you have a single (or multi, but not ALL) command sudoers entry, you'll get the sudo: no tty present and no askpass program specified when the command is not part of your path (and the full path is not specified).
You can fix it by either adding the command to your PATH or invoking it with an absolute path, i.e.
sudo /usr/sbin/ipset
Instead of
sudo ipset
Command sudo fails as it is trying to prompt on root password and there is no pseudo-tty allocated (as it's part of the script).
You need to either log-in as root to run this command or set-up the following rules in your /etc/sudoers
(or: sudo visudo):
# Members of the admin group may gain root privileges.
%admin ALL=(ALL) NOPASSWD:ALL
Then make sure that your user belongs to admin group (or wheel).
Ideally (safer) it would be to limit root privileges only to specific commands which can be specified as %admin ALL=(ALL) NOPASSWD:/path/to/program
I think I can help someone with my case.
First, I changed the user setting in /etc/sudoers referring to above answer. But It still didn't work.
myuser ALL=(ALL) NOPASSWD: ALL
%mygroup ALL=(ALL:ALL) ALL
In my case, myuser was in the mygroup.
And I didn't need groups. So, deleted that line.
(Shouldn't delete that line like me, just marking the comment.)
myuser ALL=(ALL) NOPASSWD: ALL
It works!
Running shell scripts that have contain sudo commands in them from jenkins might not run as expected. To fix this, follow along
Simple steps:
On ubuntu based systems, run " $ sudo visudo "
this will open /etc/sudoers file.
If your jenkins user is already in that file, then modify to look like this:
jenkins ALL=(ALL) NOPASSWD: ALL
save the file
Relaunch your jenkins job
you shouldnt see that error message again :)
This error may also arise when you are trying to run a terminal command (that requires root password) from some non-shell script, eg sudo ls (in backticks) from a Ruby program. In this case, you can use Expect utility (http://en.wikipedia.org/wiki/Expect) or its alternatives.
For example, in Ruby to execute sudo ls without getting sudo: no tty present and no askpass program specified, you can run this:
require 'ruby_expect'
exp = RubyExpect::Expect.spawn('sudo ls', :debug => true)
exp.procedure do
each do
expect "[sudo] password for _your_username_:" do
send _your_password_
end
end
end
[this uses one of the alternatives to Expect TCL extension: ruby_expect gem].
For the reference, in case someone else encounter the same issue, I was stuck during a good hour with this error which should not happen since I was using the NOPASSWD parameter.
What I did NOT know was that sudo may raise the exact same error message when there is no tty and the command the user try to launch is not part of the allowed command in the /etc/sudoers file.
Here a simplified example of my file content with my issue:
bguser ALL = NOPASSWD: \
command_a arg_a, \
command_b arg_b \
command_c arg_c
When bguser will try to launch "sudo command_b arg_b" without any tty (bguser being used for some daemon), then he will encounter the error "no tty present and no askpass program specified".
Why?
Because a comma is missing at the end of line in the /etc/sudoers file...
(I even wonder if this is an expected behavior and not a bug in sudo since the correct error message for such case shoud be "Sorry, user bguser is not allowed to execute etc.")
I was getting this error because I had limited my user to only a single executable 'systemctl' and had misconfigured the visudo file.
Here's what I had:
jenkins ALL=NOPASSWD: systemctl
However, you need to include the full path to the executable, even if it is on your path by default, for example:
jenkins ALL=NOPASSWD: /bin/systemctl
This allows my jenkins user to restart services but not have full root access
If you add this line to your /etc/sudoers (via visudo) it will fix this problem without having to disable entering your password and when an alias for sudo -S won't work (scripts calling sudo):
Defaults visiblepw
Of course read the manual yourself to understand it, but I think for my use case of running in an LXD container via lxc exec instance -- /bin/bash its pretty safe since it isn't printing the password over a network.
Using pipeline:
echo your_pswd | sudo -S your_cmd
Using here-document:
sudo -S cmd <<eof
pwd
eof
#remember to put the above two lines without "any" indentations.
Open a terminal to ask password (whichever works):
gnome-terminal -e "sudo cmd"
xterm -e "sudo cmd"
I faced this issue when working on an Ubuntu 20.04 server.
I was trying to run a sudo command from a remote machine to deploy an app to the server. However when I run the command I get the error:
sudo: no tty present and no askpass program specified
The remote script failed with exit code 1
Here's how I fixed it:
The issue is caused by executing a sudo command which tries to request for a password, but sudo does not have access to a tty to prompt the user for a passphrase. As it can’t find a tty, sudo falls back to an askpass method but can’t find an askpass command configured, so the sudo command fails.
To fix this you need to be able to run sudo for that specific user with no password requirements. The no password requirements is configured in the /etc/sudoers file. To configure it run either of the commands below:
sudo nano /etc/sudoers
OR
sudo visudo
Note: This opens the /etc/sudoers file using your default editor.
Next, Add the following line at the bottom of the file:
# Allow members to run all commands without a password
my_user ALL=(ALL) NOPASSWD:ALL
Note: Replace my_user with your actual user
If you want the user to run specific commands you can specify them
# Allow members to run specific commands without a password
my_user ALL=(ALL) NOPASSWD:/bin/myCommand
OR
# Allow members to run specific commands without a password
my_user ALL=(ALL) NOPASSWD: /bin/myCommand, /bin/myCommand, /bin/myCommand
Save the changes and exit the file.
For more help, read the resource in this link: sudo: no tty present and no askpass program specified
That's all.
I hope this helps
The solution to the problem is
If you came across this issue anywhere else apart from the Jenkins instance follow this from the 2nd step. The first step is for the user who is having issue with the Jenkins instance.
Go to Jenkins instance of Google Cloud Console.
Enter the commands
sudo su
visudo -f /etc/sudoers
Add following line at the end
jenkins ALL= NOPASSWD: ALL
Checkout here to understand the rootcause of this issue
No one told what could cause this error, in case of migration from one host to another, remember about checking hostname in sudoers file:
So this is my /etc/sudoers config
User_Alias POWERUSER = user_name
Cmnd_Alias SKILL = /root/bin/sudo_auth_wrapper.sh
POWERUSER hostname=(root:root) NOPASSWD: SKILL
if it doesn't match
uname -a
Linux other_hostname 3.10.17 #1 SMP Wed Oct 23 16:28:33 CDT 2013 x86_64 Intel(R) Core(TM) i3-4130T CPU # 2.90GHz GenuineIntel GNU/Linux
it will pop up this error:
no tty present and no askpass program specified
Other options, not based on NOPASSWD:
Start Netbeans with root privilege ((sudo netbeans) or similar) which will presumably fork the build process with root and thus sudo will automatically succeed.
Make the operations you need to do suexec -- make them owned by root, and set mode to 4755. (This will of course let any user on the machine run them.) That way, they don't need sudo at all.
Creating virtual hard disk files with bootsectors shouldn't need sudo at all. Files are just files, and bootsectors are just data. Even the virtual machine shouldn't necessarily need root, unless you do advanced device forwarding.
Although this question is old, it is still relevant for my more or less up-to-date system. After enabling debug mode of sudo (Debug sudo /var/log/sudo_debug all#info in /etc/sudo.conf) I was pointed to /dev: "/dev is world writable". So you might need to check the tty file permissions, especially those of the directory where the tty/pts node resides in.
I was able to get this done but please make sure to follow the steps properly.
This is for the anyone who is getting import errors.
Step1: Check if files and folders have got execute permission issue.
Linux user use:
chmod 777 filename
Step2: Check which user has the permission to execute it.
Step3: open terminal type this command.
sudo visudo
add this lines to the code below
www-data ALL=(ALL) NOPASSWD:ALL
nobody ALL=(ALL) NOPASSWD:/ALL
this is to grant permission to execute the script and allow it to use all the libraries. The user generally is 'nobody' or 'www-data'.
now edit your code as
echo shell_exec('sudo -u the_user_of_the_file python your_file_name.py 2>&1');
go to terminal to check if the process is running
type this there...
ps aux | grep python
this will output all the process running in python.
Add Ons:
use the below code to check the users in your system
cut -d: -f1 /etc/passwd
Thank You!
1 open /etc/sudoers
type sudo vi /etc/sudoers. This will open your file in edit mode.
2 Add/Modify linux user
Look for the entry for Linux user. Modify as below if found or add a new line.
<USERNAME> ALL=(ALL) NOPASSWD: ALL
3 Save and Exit from edit mode
I had the same error message when I was trying to mount sshfs which required sudo : the command is something like this :
sshfs -o sftp_server="/usr/bin/sudo /usr/lib/openssh/sftp-server" user#my.server.tld:/var/www /mnt/sshfs/www
by adding the option -o debug
sshfs -o debug -o sftp_server="/usr/bin/sudo /usr/lib/openssh/sftp-server" user#my.server.tld:/var/www /mnt/sshfs/www
I had the same message of this question :
sudo: no tty present and no askpass program specified
So by reading others answer I became to make a file in /etc/sudoer.d/user on my.server.tld with :
user ALL=NOPASSWD: /usr/lib/openssh/sftp-server
and now I able to mount the drive without giving too much extra right to my user.
Below actions work for on ubuntu20
edit /etc/sudoers
visudo
or
vi /etc/sudoers
add below content
userName ALL=(ALL) NOPASSWD: ALL
%sudo ALL=(ALL:ALL) NOPASSWD:ALL
I'm not sure if this is a more recent change, but I just had this problem and sudo -S worked for me.
I have some files to upload. Usually to edit anything while logged in the server I must precede the command with sudo. That is known.
How do I send a file then as "admin" instead of "root" when I have disabled root login.
scp path\to\file admin#myaddress.com:/var/www/sitename/public/path/
PERMISSION DENIED
In my opinion, either you should give permissions to the admin user or scp your file to /tmp/ and then sudo mv /tmp/yourfile /var/www/sitename/public/path/.
There is no sudo option when we are using scp command from local to server.
Each user will have upload permission to its own folder in home directory ex. home/xxxxuser so use as below:
scp file_source_here xxxuser#yourserver:/home/xxxuser/
Now you can move file from this folder to your destination.
I suggest these two commands as it works in a bash script.
Move the file to tmp as suggested.
scp path\to\file admin#myaddress.com:/tmp
Assuming admin user can do sudo. The ssh option -t allow you to do sudo command.
ssh -t admin#myaddress.com 'sudo chown root:root /tmp/file && sudo mv /tmp/file /var/www/sitename/public/path/'