I have a script that logs on to routers and pulls output that is named routerauto. I would like to use data from a text file to automatically populate required commands to pull required info from a large number of routers.
Ultimately I would like the script to move through each line of the text file, filling in the gaps with the output from the columns as below. The text file uses tab as separator.
routerauto VARIABLE1 "sh service id VARIABLE2 sap VARIABLE4 detail"
Example data:
hostnamei serv-id cct sap
london-officei 123456 No987654321 8/1/4:100
Example output:
routerauto london-office "sh service id 123456 sap 8/1/4:100 detail"
Here is a bash only solution:
#!/bin/bash
while read hostnamei servid cct sap; do
echo routerauto $hostnamei \"sh service id $servid sap $sap detail\"
done < <(tail -n +2 sample.data)
Producing given your sample file:
routerauto london-officei "sh service id 123456 sap 8/1/4:100 detail"
Please note this assume no space are allowed in your various data fields.
Related
i have a file that is quite dynamic. Dynamic in a sense that Host and iSCSI_Name may come short or long. It works well for some host with long iqn name like the sample below but it doesn't work for host with shorter name.
Would appreciate if someone had done this or maybe had a previous script that creates a dynamic header that follows the length on the given data or vice versa.
With long iqn name
MAPPING
==================================================================================
Host Status iSCSI_Name State
==================================================================================
irefr-esz-011 online iqn.2000-01.com.vmware:irefr-esz-011-312901 active
==================================================================================
with short iqn and host name output looks like this. Data is not in place.
MAPPING
==================================================================================
Host Status iSCSI_Name State
==================================================================================
esz1 online irefr-esz-011-312901 active
==================================================================================
Currently, i had this on my script.
echo -e "\e[96m MAPPING\e[0m"
echo "=================================================================================="
printf '%-12s %-30s %-21s %-30s %-20s\n' Host Status iSCSI_Name State
echo "=================================================================================="
cat outputfile | column -t
echo "=================================================================================="
echo
output file:
irefr-esz-011 online iqn.2000-01.com.vmware:irefr-esz-011-312901 active
esz1 online irefr-esz-011-312901 active
irefr-esz-011 online iqn.2000-01.com.vmware:irefr-esz-011-312901 active
esz1 online irefr-esz-011-312901 active
irefr-esz-011 online iqn.2000-01.com.vmware:irefr-esz-011-312901 active
esz1 online irefr-esz-011-312901 active
What's about
SEP="===================================================================================="
(echo Host Status iSCSI_Name State; cat outputfile) | column -t | \
sed "1 s/\(.*\)/$SEP\n\1\n$SEP/";echo $SEP
sed picks the first line and decorates it with a leading and a trailing separator.
We have 20 worker on AWS and I want to parameterized CSV file name for each instance Please help
I have divided my CSV in to number of Load generator hosts
$ wc -l "youroriginalcsv.csv" /* this will return number of total rows in csv*/
$ split -l "count of above query"/"number of hosts" "youroriginalcsv.csv" /* this will split CSV with file name as xaa, xab ... */
Transfer each unique CSV to all available hosts
$ scp xaa host1_user#host1_ip:/csvpath/csvfile.csv
$ scp xab host2_user#host2_ip:/csvpath/csvfile.csv
$ scp xaz hostN_user#hostN_ip:/csvpath/csvfile.csv
Now I want to use specific file name for specific host
What do you mean by "specific file name for specific host"? Your CSV files are all named csvfile.csv so it's sufficient to specify /csvpath/csvfile.csv in the CSV Data Set Config and each JMeter slave will pick up its own file containing partial data from the "big" CSV file.
If you want to use different names for CSV files depending on the machine IP address or DNS hostname - go for combination of If Controller with __machineName() or __machineIP() function
Also if you don't want the same data to be re-used by different JMeter slaves you can consider using Redis Data Set Config or HTTP Simple Table Server, this way you won't have to "split" and "copy" CSV files and will be able to centrally manage your test data from a single location
I am having three columns in a CSV: Client Name, save Set Name and Status. For some clients, we have two Status as Failed and Success both. So, I want to filter those clients only which have status as only Failed. Clients who are having two entries such as Failed and success also, I want to omit.
When I am using the listed command, it's giving me values whose status was successful also might be later on. I want values which are only Failed. Not successful even once
cat "$pwd"/Daily-Failed.csv|egrep -i 'failed|Interrupted'|awk -F',' '{print $2,$3,$9}'|sort -u > "$pwd"/Final-Failed/Failed.csv
(edit) Or with newlines:
cat "$pwd"/Daily-Failed.csv|
egrep -i 'failed|Interrupted'|
awk -F',' '{print $2,$3,$9}'|
sort -u > "$pwd"/Final-Failed/Failed.csv
enter image description here
Please find the input and desired output. Input Client Name, Save Set, Status
Star,D:/,Failed
Star,C:/,Failed
Moon,C:/,Failed
Galaxy,D:/,Failed
Sun,D:/,Failed
Star,C:/,Success
Sun,D:/,Success
Output "Client Name","Save Set",Status
Galaxy,D:/,Failed
Moon,C:/,Failed
Star,D:/,Failed
I want to filter those clients only which have status as only Failed. Clients who are having two entries such as Failed and success also, I want to omit.
I'm going to assume, looking at your sample input (Which really needs to be text in your question, not an image), that both the Client Name and Save Set columns matter - you have (Star, C:/) with both success and failure rows, and (Star, D:/) with just failure, and the latter shows up in your output, and that's the only way that would make sense given your stated goal. On the other hand you also have two (Sun, D:/) rows, one success, one failure, and that shows up in your output even though it doesn't meet your criteria any way you look at it...
Anyways, this sort of grouping and filtering of tabular data screams database, and I like to script sqlite to make it do all the work in such cases:
#!/bin/sh
filename=Daily-Failed.csv
sqlite3 -batch -csv -header <<EOF
.import '${filename}' tbl
SELECT *
FROM tbl
GROUP BY "Client Name", "Save Set"
HAVING count(*) = 1 AND Status = 'Failed'
EOF
after taking the data in your image and turning it into a CSV file Daily-Failed.csv looking like
Client Name,Save Set,Status
Star,D:/,Failed
Star,C:/,Failed
Moon,C:/,Failed
Galaxy,D:/,Failed
Sun,D:/,Failed
Star,C:/,Success
Sun,D:/,Success
that script will output
"Client Name","Save Set",Status
Galaxy,D:/,Failed
Moon,C:/,Failed
Star,D:/,Failed
I am trying to upload a file in redis using command:
redis-cli -p <Port> -h <Host> -n <DB> -x set <key> < /tmp/file.json
The problem is : in redis value -
It is storing a \n at the end of line and I don't want this.
"{\"items\":{\"38749\":{\"buyone\":0,\"buytwo\":10},\"38712\":{\"buyone\":0,\"buytwo\":10},\"112775\":{\"buyone\":0,\"buytwo\":10},\"38721\":{\"buyone\":0,\"buytwo\":10},\"38720\":{\"buyone\":0,\"buytwo\":10},\"38714\":{\"buyone\":0,\"buytwo\":10},\"38726\":{\"buyone\":0,\"buytwo\":10},\"38733\":{\"buyone\":0,\"buytwo\":10},\"38729\":{\"buyone\":0,\"buytwo\":10},\"113708\":{\"buyone\":0,\"buytwo\":10},\"38731\":{\"buyone\":0,\"buytwo\":10},\"38745\":{\"buyone\":0,\"buytwo\":10},\"38732\":{\"buyone\":0,\"buytwo\":10},\"100074\":{\"buyone\":0,\"buytwo\":10},\"38730\":{\"buyone\":0,\"buytwo\":10},\"38719\":{\"buyone\":0,\"buytwo\":10},\"38723\":{\"buyone\":0,\"buytwo\":10},\"38755\":{\"buyone\":0,\"buytwo\":10},\"38760\":{\"buyone\":0,\"buytwo\":10}}}\n"
Since your file contains newlines, that's what gets stored in Redis.
You'll need to strip the newlines from your file before setting its contents to Redis. Depending on your OS, the method may vary. Here's a question about this: How do I remove newlines from a text file?
Finally got this working -
cat /tmp/up.json | redis-cli -n 20 --pipe
and up.json contents
set 'PACKAGES_CONFIG' '{"checkOfferFieldPrices":true,"showPrescInfoScreen":true,"showAddOnsScreen":true,"offerText":"1 + 1 with Lenskart Gold","bannerConfig":{"isVisible":true,"primaryText":"Hi %s, You are a GOLD Member!","secondaryText":"You are eligible for Buy 1 Get 1 offer on this order!"},"isExpandedByDefault":true,"isPreSelected":true,"displayBogoTabs": true, "defaultSelectedTabId": "buy2","tabConfig":[{"id":"buy1","title":"Buy 1","subtitle":"No Offer","enabled":true},{"id":"buy2","title":"Buy 2","subtitle":"Buy 1 Get 1 Free","enabled":true}]}'
I'm looking for a possibility to export all failed jobs (resolved and not) of a day into a file (text, csv, xml,..)
Tendency is, I will not be able to check all resolved/forced-ok jobs which failed all throughout the day unless I do it manually by placing in a spreadsheet.
Does anybody know if there is such an utility? We're currently using Control-M in Version 7.0 on Server
You can schedule a job do so :-
run below script as command line with passing two argument , %%PARM1 %%PARM2
you need to update two filed in it :-
1. NDP time of your Environment , I have used as 0930
2. Control-M environment name
3. your email ID in last line of mailx and file path as per your system .
***you can use mutt -a if mailx -a is not working in your system for sending email with attached file .
----------------------------------
now job :-
Job Type : Command
File Path : not reuired
C ommand : path/report.sh %%PARM1 %%PARM2
rest all as normal ,
but don't forget to define PARM1 and PRAM2 in auto edit variable
PARM1 = %%$PREV
PARM2 = %%$DATE
-------------------------
Script
***********************************
report.sh
------------------------------------------------
#!/bin/bash
env=< Control-M user name > # Use control-M name
ctmlog list $1 0930 $2 0930 | grep NOTOK > $1_failedjob.txt # update time to NDP time ,i used 0930
cut -d'|' -f2,3,4,5,8 $1_failedjob.txt | sed 's/|/,/g' > $1_failed.csv
awk 'BEGIN {print "DATE,TIME,JOBNAME\t,ORDERID\t,STATUS";}
{print $0;}
END { print "\tReport generated\n";}' $1_failed.csv
rm $1_failedjob.txt
echo " Last 24 Hour failed job list " | mailx -s "Failed Job list for $1" -a "absolute path of file $1_failed.csv" youremail#domain.com
exit 0`
&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&&
Apart from using this , you can always ask your ops team to send an report by exporting failed job for a particular time and date from Control-m EM GUI