I have a cscope database path in environment variable CSCOPE_DB and vim works fine with it.
However, I would like cscope to also use this database when I use it without vim.
How can I do this ? I couldn't find any parameter that would allow me to specify path of the database so not sure how to do this.
I can cd to the database directory but I don't want to change my current directory when I exit cscope.
Well this is how I solved it: //well still won't say this is the best way to do it.
Simple shell script:
#!/bin/csh
set ORIGINAL_PWD=`pwd`
cd $CSCOPE_DB
cscope -d
cd $ORIGINAL_PWD
Related
I am trying to permanently add a binary to the path variable on mac os. I have read several posts and blogs, it just does not work.
The question: given a directory /dir which contains an executable foo, how can I make it such that I can execute foo in the commandline without having to type export PATH... etc., and without having to move the foo executable to the bin folder?
I know there exists several scripts that are run on startup and whenever you open a command prompt, I just cannot seem to find the correct one. If I manually execute the export PATH... command and then do foo, it works.
If the export command works for you, just add it to either ~/.zshrc (on zsh) or ~/.bashrc (on bash).
-bash: export: /Users/deboadebayo/Desktop/Coding/:/opt/anaconda3/bin:/Library/Frameworks/Python.framework/Versions/3.8/bin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin':
not a valid identifier
The above message is the error message I receive every time I open my terminal. I did create a backup of my bash profile. But essentially now I can no longer navigate anywhere I want to go using command line requests.
Any help would be much appreciated
If you have a backup, use an absolute path to the mv and cp commands to rename your broken file and restore the backup, both without depending on path lookup.
/bin/mv .bash_profile .bash_profile.broken
/bin/cp .bash_profile.backup .bash_profile
Close the current terminal window and open a new one, which should use your working, original .bash_profile to initialize PATH. Now you try to make the correct modification to your PATH.
oops. The easiest way to fix it would be to launch an editor with an absolute path. $PATH only specifies the locations in which the shell will search if told to execute a program relative (or no) path specified. The which program can search the path and shows the first executable found:
$ which vim
/usr/bin/vim
So if you're a vim user, you should be able to run /usr/bin/vim at the command line, and the path won't be relevant. Then you can fix your file in the editor. Looks like my osx machine also has nano if you'd prefer that editor. I don't think I installed it so it probably came shipped with osx I'm guessing:
$ which nano
/usr/bin/nano
If you want to revert to your backup, use cp, but specify it from its absolute position, /bin/cp:
$ /bin/cp first.txt second.txt
Obviously you'll want to change the file names on that one for it to work for you.
I am starting with spring-roo, so I downloaded it and now I'm trying to export the variable.
To get it, I tried:
PATH=$PATH:/Users/myUsr/spring-roo/bin
export PATH
PATH variable
my-Name-3:~ myUsr$ echo $PATH
/sw/bin:/sw/sbin:/usr/local/mysql/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin:/usr/X11R6/bin:/Users/myUsr/spring-roo/bin
In this path (/Users/myUsr/spring-roo/bin), there is roo.sh
But then, I can not run the command roo as it is supposed to be.
You are not supposed to be able to run a command roo (no .sh), when all you have is roo.sh. Run roo.sh instead. There is no magic dropping of extensions in Unix.
Are you in the directory where the root.sh is ? Just give a try by being in that directory to run the shell script. Also check the permissions of the file.
I am on Mac's OS 10.6, and I am trying to learn a thing or two about shell scripting. I understand how to save a shell script and make it executable, but I am wondering what I can do or where I can save the file to make it global (that is, accessible no matter what folder I am in).
For example, if I save a .sh file in the /Users/username/ directory and make it executable, I can only execute that script in that specific directory. If I navigate to /Users/username/Downloads, for example, I can't execute the script.
Also, any suggestions of resources for learning more about shell scripting would be helpful. Thanks
/usr/local/bin would be the most appropriate location. Mac OS X has it in the PATH by default
There are two ways to do it -
Put your script in usr/local/bin and make sure it is executable(chmod +x my_script)(This is already set in the path, you can check by doing an echo $PATH)
Create a folder in your home directory called bin. (For your personal scripts)
cd ~ (Takes you to your home directory)
mkdir bin (create a bin folder)
vim .bash_profile (to set path environment variable)
export PATH=~/bin:$PATH (Press i then add this line and then do esc and type :wq)
Now you can just type the name of your script and run it from anywhere you want.
** NOTE: If you want to run the script with a shortened command rather than typing your entire filename, add the following to your .bash_profile:
alias myscript='my_script.sh'
Then you can run the script by simply typing myscript. (you can sub in whatever alias you'd like)
Traditionally, such scripts either go in ~/bin (ie: the bin directory in your home directory) or /usr/local/bin/ The former means the script will only work for you, the latter is for scripts you want anybody on the system to be able to run.
If you put it in ~/bin, you may need to add that to your PATH environment variable. /usr/local/bin should already be on the path.
In mac operating system
Open bash ~/.bashrc file.
add path of your script in your bashrc file , using
export PATH="$PATH:/Users/sher.mohammad/Office/practice/practiceShell"
Open your ~./bash_profile file and add [[ -s ~/.bashrc ]] && source ~/.bashrc
open new terminal window
Now whenever you will open your terminal your script will be loaded
This one is super easy if you are familiar with your bashrc file! This will entirely use just your .bashrc file and takes 2 seconds to accomplish.
(I use Arch Linux Manjaro so I use .bashrc located in my home directory)
The code to be placed in your .bashrc file:
# Simple bashrc method to launch anything in terminal from any directory
YOURCOMMAND () {
cd /path/to/directory/containing/your/script/ && ./YOURSCRIPT
}
As you can see, first you use the simple 'cd' command and give it the directory of the scripts location, then use '&&' so that you can make the next command executed right after, and finally open your script just as you would normally! Super easy and saved right in your .bash file! :)
Hope I've helped someone!
Sincerely,
AnonymousX
On using bash shell, write that script as function and then put it to the .bashrc or source the file which containing that function by "source file_name"
Now execute the script by function call in the shell.
Either saving it in /usr/bin (or any other directory present in PATH) or editing PATH to include the directory you saved it in will basically make it run in any directory.
from the working directory of 'script.sh'" mv [script.sh] /usr/local/bin"( not tested but seems to be the least complex way IMO.)
You should put it in the global executable directory on your machine. I think that would usually be /usr/bin on Unix-based operating systems (this would however most often require super user privileges on that machine).
You could also put it in any other directory that is in the $PATH environment variable, although it would only work for those users who have that directory in that variable.
You can find the value of $PATH by typing echo $PATH in a shell. The directories are separated by :.
I'm on a Mac and I'm trying to make a Vim plugin for compiling/running actionscript files.
First, I need to run mxmlc on the command line, but to do that I have to keep on typing the path to it. Where do I place it so that I don't have to retype the path?
You need to modify your "$PATH" environment variable, so that the tool is in that directory. However, if you want to make this very easy... you can download my macosx-environment-setup.tar.bz2 program. If you execute the "install.sh" script using "sudo ./install.sh", it will setup your environment in such a way that if you use "/Library/Flex4SDK" as the location for the Flex4SDK, it will automatically find it, define FLEX_HOME to point to that location, and it will also ensure that the binaries from the Flex4SDK are in your PATH.
Side Note: This is up on the web, because I use it in my Development Environment Setup How-To Guides. If you aren't too keen about running "sudo ./install.sh", you need to choose a location (I am going to assume "/Library/Flex4SDK", so that the tools are located in "/Library/Flex4SDK/bin"), and then you would simply need to edit your "~/.profile" file (using "nano ~/.profile"), adding the following to the very end:
export FLEX_HOME=/Library/Flex4SDK
export PATH="$PATH":"$FLEX_HOME/bin"
Note that these changes occur in your shell... they will not affect programs that are launched by double-clicking them in Finder. In order to affect those programs, you will need to place the environment variables in a file named ~/.MacOSX/environment.plist. See Automatically build ~/.MacOSX/environment.plist for a script that will automatically generate such a file using the current environment variables defined in your shell.
There are a few ways to answer this:
In one of your directories searched
by PATH (see the list with echo
$PATH)
Add a new directory to PATH
(e.g. in your ~/.bashrc
export PATH=$PATH:/path/to/bindir)
Add an
alias to your program (e.g. in your
~/.bashrc alias
mxmic=/path/to/mxmic)
(I'm assuming you're using bash shell, which is usually the case you can check with echo $SHELL)