I am using Mvp4g on the gwt client side. I want to generate symbolMap that is used by RemoteLogging Servlet but when I try to generate symbol map using mvn clean install and specifying -extra folder_name property in gwt-maven-plugin configuration, I don't see the symbolMap files. It is not a plain gwt app but its gwt with mvp4g. I don't know whether its mvp4g that is causing the problem.
mvp4g generates Java code on the client side. This happens before the compiler translates the code to JavaScript. Check your settings. May be this post helps. How to generate symbol map in gwt using maven?
Update:
I use this maven configuration:
<gwt.output>myPathToTheProjectDirectory/output</gwt.output>
<gwt.gen>genSources</gwt.gen>
<gwt.extra>extra</gwt.extra>
And this for the maven-gwt-plugin:
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>gwt-maven-plugin</artifactId>
<version>2.6.1</version>
<executions>
<execution>
<phase>compile</phase>
<id>bla</id>
<goals>
<goal>compile</goal>
</goals>
<configuration>
<draftCompile>false</draftCompile>
<disableClassMetadata>true</disableClassMetadata>
<compileReport>true</compileReport>
<warSourceDirectory>${gwt.war}</warSourceDirectory>
<webappDirectory>${gwt.output}</webappDirectory>
<gen>${gwt.output}/${gwt.gen}</gen>
<extra>${gwt.output}/${gwt.extra}</extra>
<fragmentCount>8</fragmentCount>
<extraJvmArgs>-Xms1G -Xmx1G -Xss1024k -XX:MaxPermSize=1024m -Dgwt.persistentunitcache=false</extraJvmArgs>
<localWorkers>7</localWorkers>
</configuration>
</execution>
</executions>
</plugin>
In case I execute maven:compile, the symbolmaps are listed inside the folder myPathToTheProjectDirectory/output/extra/symbolmaps.
Try add this: <set-property name="compiler.useSourceMaps" value="true" />
It solves the problem for me.
Related
I have read up on the limited information regarding com.alexnederlof jasperreports-plugin and I'm looking to convert my current ant build to use this maven plugin, but there doesn't seem to be any documentation available.
My biggest concern is run-time: If I use this plugin at build-time, what version of jasper-reports do I need to use at run-time?
Am I missing a reference somewhere? As the old adage goes, "If there isn't any documentation, then I guess I'll have to write it."
I am not sure of what you are after but, I am using this plugin in maven to generate the source .jrxml files to .jasper files and the configuration in pom goes like this:
<plugin>
<groupId>com.alexnederlof</groupId>
<artifactId>jasperreports-plugin</artifactId>
<version>2.3</version>
<executions>
<execution>
<phase>process-sources</phase>
<goals>
<goal>jasper</goal>
</goals>
</execution>
</executions>
<configuration>
<!-- These are the default configurations: -->
<compiler>net.sf.jasperreports.engine.design.JRJdtCompiler</compiler>
<sourceDirectory>src/main/jasperreports</sourceDirectory>
<outputDirectory>${basedir}/src/main/webapp</outputDirectory>
<outputFileExt>.jasper</outputFileExt>
<xmlValidation>true</xmlValidation>
<verbose>false</verbose>
<numberOfThreads>4</numberOfThreads>
<failOnMissingSourceDirectory>true</failOnMissingSourceDirectory>
<sourceScanner>
org.codehaus.plexus.compiler.util.scan.StaleSourceScanner
</sourceScanner>
</configuration>
</plugin>
Hope this helps
I'm currently evaluating Sonarqube 6.3 (a big upgrade from my current 5.5 instance) and I'm getting confused trying to work out the functionality of the sonar.test.exclusions setting.
There's this question: Sonar Maven Plugin: How do I exclude test source directories? which seems to indicate that it is used to exclude test files from analysis (which is what I'm after - I don't want my sonar ruleset run over my unit tests). The documentation https://docs.sonarqube.org/display/SONAR/Narrowing+the+Focus also indicates that it is used to 'exclude unit test files' (perhaps this can be expanded upon to make it clearer?)
Thing is, when I add sonar.test.exclusions with a value of **/src/test/** and then run my analysis, I'm still getting code smells and the like being found for:
Foo/src/test/java/foo/bar/BarTest.java
Foo/src/test/java/lah/LahTest.java
etc.
When I use sonar.exclusions instead, they don't show up. Why is sonar.test.exclusions not doing what I expect?
First of all: if you have a Maven project, you should use the scanner for Maven (mvn sonar:sonar). It will simplify your configuration, and will automatically register src/test/java folder as a test directory.
Now if you want to do the configuration manually, or understand what is going on under the hood, here is the explanation: SonarQube scanner work with 2 sets of files, main and test. Main source files are configured using the property sonar.sources. Test source files are configured using sonar.tests.
On top of that, you can filter some content using the sonar.[test.]exclusions properties.
In you case your problem is that Foo/src/test/java/foo/bar/BarTest.java seems to be considered as a main source file. That's why sonar.test.exclusions has no effect.
Using maven with verfication goal (mvn clean verify sonar:sonar install), I have used this configuration without problems:
...
<properties>
....
<sonar.exclusions>
**/generated/**/*,
**/model/**/*
</sonar.exclusions>
<sonar.test.exclusions>
src/test/**/*
</sonar.test.exclusions>
....
<sonar.java.coveragePlugin>jacoco</sonar.java.coveragePlugin>
<sonar.jacoco.reportPath>${project.basedir}/../target/jacoco.exec</sonar.jacoco.reportPath>
<sonar.coverage.exclusions>
**/generated/**/*,
**/model/**/*
</sonar.coverage.exclusions>
<jacoco.version>0.7.5.201505241946</jacoco.version>
....
</properties>
....
Coverage exclusion configuration, inside properties (up) and jacoco plugin configuracion:
.....
<build>
<plugins>
<plugin>
<groupId>org.jacoco</groupId>
<artifactId>jacoco-maven-plugin</artifactId>
<version>${jacoco.version}</version>
<executions>
<execution>
<id>prepare-agent</id>
<goals>
<goal>prepare-agent</goal>
</goals>
</execution>
<execution>
<id>report</id>
<phase>prepare-package</phase>
<goals>
<goal>report</goal>
</goals>
</execution>
<execution>
<id>post-unit-test</id>
<phase>test</phase>
<goals>
<goal>report</goal>
</goals>
<configuration>
<dataFile>target/jacoco.exec</dataFile>
<outputDirectory>target/jacoco-ut</outputDirectory>
</configuration>
</execution>
</executions>
<configuration>
<systemPropertyVariables>
<jacoco-agent.destfile>target/jacoco.exec</jacoco-agent.destfile>
</systemPropertyVariables>
</configuration>
</plugin>
</plugins>
</build>
....
I want to generate symbol map file in gwt using maven commandline option? I tried with -extra WEB-INF/classses but its not working.
Basically you want to specify maven plugin configuration values/options.
Here you have the general approach: LINKE
Besides that you have to know the plugin prefix that you can find on the GWT plugin page (there are several GWT maven plugins)
EDIT: added a gwt plugin example:
Just define the ${} snippets in your gwt property section and you will be fine.
<!-- The GWT compiler configuration
References:
Plugin: http://mojo.codehaus.org/gwt-maven-plugin
Optimizing the build: http://www.sencha.com/blog/using-the-gwt-compiler-for-better-builds
System properties: https://code.google.com/p/google-web-toolkit/wiki/JavaSystemPropertiesAndGwt
-->
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>gwt-maven-plugin</artifactId>
<executions>
<execution>
<phase>compile</phase>
<id>bla</id>
<goals>
<goal>compile</goal>
</goals>
<configuration>
<module>com.bla.BlaProd</module>
<mode>htmlunit</mode>
<draftCompile>false</draftCompile>
<disableClassMetadata>true</disableClassMetadata>
<compileReport>true</compileReport>
<warSourceDirectory>${gwt.war}</warSourceDirectory>
<webappDirectory>${gwt.output.bla}</webappDirectory>
<gen>${gwt.output.bla}/${gwt.gen}</gen>
<extra>${gwt.output.bla}/${gwt.extra}</extra>
<fragmentCount>8</fragmentCount>
<extraJvmArgs>-Xms1G -Xmx1G -Xss1024k -XX:MaxPermSize=1024m -Dgwt.persistentunitcache=false</extraJvmArgs>
<localWorkers>4</localWorkers>
</configuration>
</execution>
</executions>
</plugin>
We have a common set of XSDs (datatypes, vocabulary, etc.) we're generating with the jaxb2-maven-plugin in its own Maven project. In a second project, I need to refer to one or more of those XSDs at compile time but don't want them included in the resulting artifact. I've created a catalog file, which works fine except I get everything in it.
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>jaxb2-maven-plugin</artifactId>
<version>1.6</version>
<executions>
<execution>
<goals>
<goal>xjc</goal>
</goals>
</execution>
</executions>
<configuration>
<outputDirectory>${basedir}/src/main/java</outputDirectory>
<target>2.1</target>
<catalog>catalog.cat</catalog>
</configuration>
I've pored over the plugin docs, but they're woefully light on detail. Is there any way to get reuse out of common schemas without every project having to take a copy of them?
Thanks
This is something my maven-jaxb2-plugin can do:
Compiling schema from Maven Artifact
The documentation site is currently very unstable so here's snippets of the documentation.
<configuration>
<forceRegenerate>true</forceRegenerate>
<schemas>
<schema>
<dependencyResource>
<groupId>org.jvnet.jaxb2.maven2</groupId>
<artifactId>maven-jaxb2-plugin-tests-po</artifactId>
<!-- Can be defined in project dependencies or dependency management -->
<version>${project.version}</version>
<resource>purchaseorder.xsd</resource>
</dependencyResource>
</schema>
</schemas>
</configuration>
Here's a sample project.
I have a Maven-built web-app that uses JPA 2.0 at the back end. The JPA provider is EclipseLink 2.3.2.
When I build the project (and it deploys runs successfully) it builds the JPA meta-model in the directory
${basedir}/target/generated-sources/annotations/
Yet the IDE doesn't see the classes defined there. Little red dots with an exclamation point everywhere. Yet I can navigate to those files in the Projects window and open the generated source files.
Does this happen to anyone else and does anyone know of a way to fix it?
UPDATE:
As a work-around I have discovered that I can exit NetBeans, delete the NetBeans cache directory, then restart. This forces NetBeans to rebuild the cache and then the classes become visible again. Should I submit a bug to the NetBeans bug tracker? I can't come up with a test case to make it happen, but it does fairly often.
If you go to project properties/sources there is a note about this: you need to generate sources under
${basedir}/target/generated-sources/FOOBAR
where FOOBAR is the name of your plugin.
After reading #jeqo answer, I tested if, by manually renaming:
"${project.build.directory}/generated-sources/annotations" to ".../generated-sources/hibernate-jpamodelgen"
would make a difference to Nebeans (I'm using v8.2 on ubuntu 16.04).
Everything worked like a charm.
I then modified the pom file as follows:
1) removed the "org.hibernate: hibernate.jpamodelgen" dependency.
2) configured the maven-compiler-plugin as follows:
<plugin>
<groupId>>org.apache.maven.plugins</groupId>
<artifactId>maven-compiler-plugin</artifactId>
<version>3.6.1</version>
<configuration>
<compilerArgument>-proc:none</compilerArgument>
</configuration>
</plugin>
These two steps is to make sure that the hibernate-jpamodelgen does
not run on auto-pilot just by adding it in the project dependency
list. Please refer to JPA Static MetaModel Generator doc.
3) added the following plugin with configuration
<plugin>
<groupId>org.bsc.maven</groupId>
<artifactId>maven-processor-plugin</artifactId>
<version>3.2.0</version>
<executions>
<execution>
<id>process</id>
<goals>
<goal>process</goal>
</goals>
<phase>generate-sources</phase>
<configuration>
<processors>
<processor>org.hibernate.jpamodelgen.JPAMetaModelEntityProcessor</processor>
</processors>
<defaultOutputDirectory>${project.build.directory}/generated-sources/hibernate-jpamodelgen/</defaultOutputDirectory>
</configuration>
</execution>
</executions>
<dependencies>
<dependency>
<groupId>org.hibernate</groupId>
<artifactId>hibernate-jpamodelgen</artifactId>
<version>5.2.9.Final</version>
</dependency>
</dependencies>
</plugin>
This config is directly from the Hibernate JPA Static Metamodel Generator documentation page except for the following line:
<defaultOutputDirectory>${project.build.directory}/generated-sources/hibernate-jpamodelgen/</defaultOutputDirectory>
This line simply generates the metamodel in the directory named after the maven plugin name. From this point, I got all Netbeans references working at design time as if the generated classes were in the src directory subtree.
Hope this helps,
J
Sometimes Netbeans has troubles refreshing. Perhaps clean and rebuild the project and restart Netbeans?
Today I did more experiments on this topic because it is so annoying for me as well. Finally I have realized it is only a problem related how NetBeans deal with indexing classes. This is not a problem of the target directory name and not a problem of the project. It is only NetBeans' mistake. So I have created an issue as well hopefully NetBeans Team can bring the final solution soon. You can see my ticket here https://issues.apache.org/jira/browse/NETBEANS-4191
In my environment the NetBeans 11.3 (x64) with openJDK 1.8.0_242-b08 and apache-maven 3.6.3 version is used under Windows 10 (1607).
But until the final solution arrives here is what I did as a workaround solving the symbol not found problem.
I have added a profile section to my pom file:
<profile>
<id>nb-modelgen-fix</id>
<build>
<plugins>
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-antrun-plugin</artifactId>
<version>3.0.0</version>
<executions>
<execution>
<id>modelgen-touch-files</id>
<phase>install</phase>
<goals>
<goal>run</goal>
</goals>
<configuration>
<target>
<touch>
<fileset id="model.elements" dir="src/main/java" includes="**/*.java">
<containsregexp expression="(#Entity|#MappedSuperclass|#Embeddable)" casesensitive="yes" />
</fileset>
</touch>
</target>
</configuration>
</execution>
</executions>
</plugin>
</plugins>
</build>
</profile>
I am using the following simple solution to generate the metamodel classes in my project:
<plugin>
<groupId>org.apache.maven.plugins</groupId>
<artifactId>maven-compiler-plugin</artifactId>
<configuration>
<annotationProcessors>
<annotationProcessor>
org.eclipse.persistence.internal.jpa.modelgen.CanonicalModelProcessor
</annotationProcessor>
</annotationProcessors>
<compilerArgs>
<arg>-Aeclipselink.persistenceunits=MY-PU</arg>
</compilerArgs>
<source>1.8</source>
<target>1.8</target>
</configuration>
</plugin>
And of course a maven-build-helper adding the generated source folders to the project:
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>build-helper-maven-plugin</artifactId>
<version>3.1.0</version>
<executions>
<execution>
<id>add-source</id>
<phase>generate-sources</phase>
<goals>
<goal>add-source</goal>
</goals>
<configuration>
<sources>
<source>${project.build.directory}/generated-sources/annotations</source>
<source>${project.build.directory}/generated-sources/wsimport</source>
</sources>
</configuration>
</execution>
</executions>
</plugin>
And also I have created a file in the same place where the pom.xml is located called nbactions.xml with the following content (to activate this profile in NetBeans IDE only)
<?xml version="1.0" encoding="UTF-8"?>
<actions>
<action>
<actionName>rebuild</actionName>
<packagings>
<packaging>*</packaging>
</packagings>
<goals>
<goal>clean</goal>
<goal>install</goal>
</goals>
<activatedProfiles>
<activatedProfile>nb-modelgen-fix</activatedProfile>
</activatedProfiles>
</action>
</actions>
What it does? When you execute the "Clean and Build" action in NetBeans IDE it activates a task (implemented easily with maven-antrun-plugin) which just a simple touch on all JPA annotated with #Entity, #MappedSuperClass or #Embeddable theese are the sources for the metamodel generations. I have attached this task to the install phase but it worked as well in other phases as well. It lookes that this way NetBeans wake up and makes for the missing indexes for the metamodel classess.
You can read more on this in my NetBeans' issue ticket.
I hope this can save time for anybody else.
If you are using jaxws then make sure you add a <sourceDestDir> node to the <configuration> section of the jaxws plug-in "artifact" in the appropriate pom. For example:
<plugin>
<groupId>org.codehaus.mojo</groupId>
<artifactId>jaxws-maven-plugin</artifactId>
<executions>
<execution>
<goals>
<goal>dojaxws</goal>
</goals>
<configuration>
<sourceDestDir>${project.build.directory}/generated-sources/jaxws</sourceDestDir>
....
</configuration>
</execution>
</executions>
<configuration>
<wsdlDirectory>src/main/resources/com/mystuff/ws</wsdlDirectory>
<bindingDirectory>src/jaxws/binding</bindingDirectory>
<target>2.0</target>
</configuration>
</plugin>
As explained above and as noted by netbeans, you must use the generate-sources path appended with the "plug-in" name. Hopefully the above clears up what "plug-in name" means and how exactly one is supposed to get jaxws to put the generated sources where netbeans need them to be. Clearly the "configuration" section will be different for each plugin... The node <sourceDestDir> is needed for jaxws, other plugins may use something else.
For me it worked after I added <endorsed.dir>${project.build.directory}/endorsed</endorsed.dir> to the <properties> of the pom.xml, e.g.:
<properties>
<maven.compiler.source>1.8</maven.compiler.source>
<maven.compiler.target>1.8</maven.compiler.target>
<endorsed.dir>${project.build.directory}/endorsed</endorsed.dir>
<project.build.sourceEncoding>UTF-8</project.build.sourceEncoding>
<jakartaee>8.0</jakartaee>
</properties>
But I have no explanation why.