Related
This morning, Xcode 9.0 (9A235) shows a new/strange Auto Complete box that is not at all what it used to be. How do I get the full auto-complete box so that autocomplete looks like how it usually does?
Try:
Go to Xcode > Preferences > Text Editing
Under Code completion - Uncheck 'Suggest completions while typing'
Quit out of Xcode and then relaunch Xcode.
Go to Xcode > Preferences > Text Editing again
Quit out of Xcode and then relaunch Xcode.
Now go to Code completion and check 'Suggest completions while typing'.
Try typing library function or enum and enjoy!
Deleting the DERIVED DATA folder seemed to fix my issue. Thanks to this post: swift println() not showing autocomplete options while writting code
Things to try:
#1
Run this command in the project directory if you use cocoapods:
rm -rf ~/Library/Caches/CocoaPods;
rm -rf Pods; rm -rf ~/Library/Developer/Xcode/DerivedData/*;
pod deintegrate; pod setup; pod install;
#2
**Clean Cached Data**
Clean the Project -> Cmd+Shift+K
Clean the Build Folder -> Cmd+Shift+Option+K
If you skipped step one:
Delete Derived Data
Xcode Preferences -> Locations ->
Arrow Symbol Takes you to DerrivedData -> Delete Folder
#3
**Check your Build Phase's Compile Sources.**
Every .swift and .m file in the project should be in this list or it won't autocomplete in those files.
#4
**Optimize your Editor:**
Use fileprivate* on every class property and function that you can to reduce the scope of the Compilers work per item.
Write modular/OOP code so you have less code for the compiler to read.
Avoid using Type Inferance when the result is a complex calculation, and try to break down complex calculations into let this = smallerOperation statements
* In Swift 4 private became stricter than fileprivate
In Xcode 12 there have been significant improvements in how often deleting derived data is necessary (though freezing has increased).
Xcode Version 11.0 (11A420a)
I have tried the solution from Lal Krishna for Xcode V11.0. It worked a few times but later I got no result.
I found one solution. You must delete two files:
Library/Developer/Xcode/Derived Data (as described before)
Library/Developer/Xcode/UserData/IDEEditorInteractivityHistory
That solution helps me now. May be useful for others 😉
This can happen when the file is not a member of the Target. Open the file where autocomplete is not working and show the the "Utilities" tab in the top right of Xcode (blue in the screenshot below).
Ensure your Target (typically your app's name) is checked. Autocomplete should work almost instantly without restarting Xcode, cleaning, or deleting Derived Data.
If it is already checked, make sure to uncheck and recheck it again. For me, it did the trick.
I'm using Xcode 10.2 and I had the same issue.
This answer from axel helped me to fix.
Anyway, I'm going to describe a bit more:
Go to YourProject.xcodeproj by clicking with Right Mouse Click and open Show Package Contents
Go to xcuserdata and delete your youruser.xcuserdatad
If you have also the xcworkspace(if you already have any pods installed) then do step 3&4, if not then just skip step 3&4:
Go to YourProject.xcworkspace by clicking with Right Mouse Click and open Show Package Contents
Go to xcuserdata and delete your youruser.xcuserdatad
Quit Xcode
Delete Derived Data by using Terminal:
rm -rf ~/Library/Developer/Xcode/DerivedData
Open Xcode and check if it works.
This can also happen if you redundantly named your files. For example,
Data.swift
Data.swift
Here's a bit of workaround but works.
Clean the project... Command + Shift + K
Clean the build folder... Command + Shift + Options(Alt) + K
Delete derived data for the project...
This can be done with the help of this link:
How can I delete derived data in Xcode 9?
Close XCode.
Reopen XCode (let the indexing complete) and Build the project... Command + B
Once it will be done with building, The suggestions will be back. I have tried it twice.
Update:
Sometimes the issue can be as simple as Duplicate file names.
Carefully check if any new file names added by you are conflicting with older files.
In Xcode 11.4, even if you move an existing file to another group, the suggestions disappear. This can be cured simply by restarting Xcode.
Removing the file from the Test Targets fixed my problem.
After a long time of searching, I finally fixed the issue for me. In Xcode > Preferences > Text Editing, in "Code Completion", I had "Use Escape key to show completion suggestions" checked for some reason. As soon as I unchecked this box, auto completion worked like a charm, without even needing to restart Xcode! (Xcode 10)
Please try doing this:
Select the file >> check if the file is added to UITesting or UnitTesting targets (File inspector -> Target Membership). If so, please uncheck those two and make sure only the project target is selected. Then build and try if autocomplete is working fine.
This worked for me. Hope it help someone.
For Xcode 11.4 (11E146)
Back Slash in folder name breaking the autocompletion feature, If this is the case remove it and build again.
I added here what was going on in my project just in case it can help someone else... I had 2 files with the same name and I didn't realise.
Just lost a day trying to solve the autocomplete nightmare of Xcode (9.2). Deleting derived data seemed to work briefly then things reverted. Reboots etc and other suggested voodoo failed to make a difference.
I gave up and download the 30 day trial of AppCode from Jet Brains. Autocomplete worked fine there and this maybe coincidence but it then started working again in my project in Xcode. Can't guarantee that it'll keep working...
It seems to be file specific in my case (Xcode 9.2) For me the fix was:
Delete problem file (remove reference)
Clean and Build
Add file back into the project (I did not check test targets)
Build again
Finally after 3 hours of trying everything - autocomplete works as it should.
Problems mostly because there are missing location of some files in project navigator (build errors)
Press command+1 to open Project Navigator pane
Check if there are any missing files
Or you can:
Delete DerivedData (command+shift+K)
Clean build folder (command+shift+option+K)
Press build again (command+B)
You should see build error that Xcode could not find some files that prevent build tool to process auto complete.
Correct and fix any missing files that you see.
Hope this helps
Use Command + B
or Command + R to Build or Run the project
Xcode sometimes messes up ;)
Xcode 11.3, macOS catalina
process parsecd achieve 100% of cpu, so kill it helps me
goto underneath directory and delete all folders on it.
{Your User}/Library/Developer/Xcode/DeriveData
It worked for me.
For me it was happening in my test file, because it wasn't part of a target for some reason. Setting it's target membership solved the issue.
For me, the problem occured when I discarded all the changes of one file (under Source Control > Commit), which effectively deleted the file. This is what I wanted and I thought that the file and all references to it would be delted too.
However, there was still a reference to the file (shown in red) in the Project navigator. Deleting the (now non-existant) file in the Project navigator magically brought auto-completion back.
No amount of cleaning, deleting derived data, etc helped. I only realized the deleted file was still showing when I tried to build my project, which of course failed because it couldnt find that file.
Hope this will help someone save 30 minutes :)
check whether you selected the Suggest completions while typing in Xcode -> Preferences -> Text Editing
navigate to user->Library->Developer->Xcode->DerivedData in Finder and delete the DerivedData folder
My case might appear too specific to help, but it might give someone an idea of how to solve broken auto-completion. Xcode 10.2.1.
In my case, auto-complete stopped working entirely and non of these other answers helped me. In addition, the fan on the computer could be heard to go louder indicating something was overworking (no other apps running), it should be noted I was editing on a MacBook Pro laptop. It seemed to be linked with the editor struggling to parse the equation I'd written:
switch mtype {
case .indeterminate:
newPosition.x = (frame.width - mainFigureText.frame.width) / 2
case .right:
newPosition.x = (((frame.width / 2) - mainFigureText.frame.width) / 2) + (frame.width / 2)
case .left:
newPosition.x = (((frame.width / 2) - mainFigureText.frame.width) / 2)
}
I was looking to animate a text view left, right, or to the middle depending on user prefs. The newPosition is a CGPoint that the text will animate to. Anyway, I split the equations up and all of a sudden auto-complete started working and the fan went quiet! I've been able to recreate this specific problem more than once by re-typing the above code and then replacing it with:
let halfFrameWidth: CGFloat = frame.width / 2
let middleLeft = (halfFrameWidth - mainFigureText.frame.width) / 2
switch doseType {
case .right:
newPosition.x = middleLeft + halfFrameWidth
case .left:
newPosition.x = middleLeft
default:
newPosition.x = (frame.width - mainFigureText.frame.width) / 2
}
I would like to add one more to the pile of solutions, because it is the only one that worked for me and is nowhere to be found here.
Xcode normally comes with two default build configuration for every project. Release & Debug. I have an extra one for my unit tests called Testing. In Xcode 10.1, 10.2, 10.3 and 11 beta, the new build system does not seem to like it and will only auto-complete if you either use Release or Debug. Any custom build configuration breaks auto-completion in mixed (swift + objc) project with unit tests.
I faced the same problem in Xcode 11.3.1. In my case The issue was cause due to duplicate file names / Deleted file name. Better to run the application once and check whether there are any deleted files/classes so that you will get a syntax error.
This Link helped me. Open the Build Settings & fill the framework search paths. See the below image.
Build errors can break the autocompletion feature in Xcode.
I had the issue with 100% not working auto-complete, none of written here helped. One thing I noticed – it was broken right after adding some entities into .xcdatamodel file, which have codegen class definition by default.
So I wasn't surprised when using old-style codegen none (and generating classes of course) fixed the issue immediately, even without restarting the xcode.
With Xcode 11.1, simply performing Clean Build Folder or deleting derived data was not enough to fix autocomplete.
Only after restarting my Mac, everything was back to normal
If you have issue with weird completion/auto-completion/intellisense (not showing default stuff like delegates and datasource protocols methods) just change your target (e.g. from simulator iPhone 8 to real device), build the project and switch back to your original target.
Similar with issues with Interface Builder (storyboards) not showing anything, but only "nothing selected" whenever you select any part of the view. Just switch to other Xib/Storyboard (or even create new), check if it works there and switch back.
These workarounds worked for me in both cases (had both issues in one day with one project on Xcode 10.2.1). From what I've seen all over internet forums it seems these are bugs never fixed since Xcode 6.x or so.
Cheers!
XCode 6 Beta 5 and autocomplete stopped working. I thought problem in Beta 5 but I've reinstall to Beta 4 and it's still not work but it did before. I check preferences for "suggests" and I tried to delete Derived Data but it doesn't help
Clear derived data.
Under build settings, select Always Search User Paths to "YES".
Clean the project.
This happened to me recently because I had a /* */ style comment after the #end of my #implementation.
Not sure why that would break autocomplete but moving the comment into the implementation fixed autocomplete.
There seems to be a lot of reasons autocomplete breaks. Just adding to the list..
I found the solution. Problem was in an array.
I have big array like:
let array:[NSString] = ["first","second"...]
I changed it to
var array = ["first","second"...]
I don't why it's happened but it works. It was so hard to find the problem.
I was having this problem.
This is what worked for me.
Clear derived data.
Window -> Organizer -> "Select you project" -> Delete Derived Data.
Clean the project
Quit Xcode ----- this is very important. You might have to restart you computer.
Open Xcode again
Hope this works for you. This worked on 2/9/2015
Check if the .m file has been checked in "Target Membership"
Tried to clean/delete derived data multiple times. Autocomplete was disabled in some files, but not App Delegate. After a while I saw red libraries int he project navigator. Those are managed by cocoapods. The solution turned out to be:
Navigate to the project root folder
Delete "Pods" directory
open terminal, type cd
drag the project folder there to get full path
run pod install
Upon reinstalling pods, syntax highlighting and code completion is restored in the affected files.
For me it was because it was a new problem since upgrading my version of Xcode. After downloading the documentation again, everything worked fine.
My project builds with a warning, but it is not displayed in the "Issue Navigator". How can I get to this warning so I can resolve it? I've tried clicking on the warning on the top of the window but that does nothing. I'm using Xcode 4.3.
I met the same problem, and I found it simply because there are some thing wrong with the below filter input.
You can solve the problem by typing something in the below filter input and then clear it.
Building on Yingpei Zeng's answer, the buttons on the bottom right of the 'grey' panel with the 'No Filter Results' message act as toggle switches to apply or remove filters. They are the buttons in this figure here on the bottom left (the clock and the two to the right of it):
Unfortunately, the buttons do not change much when toggled so you may miss that one has been accidentally hit...
I had the same issue and for me it helped to go to Xcode->Preferences->Locations and delete everything in folders of Derived data, Snapshots, Archives. Clean project, build, and warnings and errors was back in Issue navigator.
I had the same issue with my test project. And no solution mentioned above works. Finally I figured it out because the target project I selected is not the "Test" project. I was running test of each individual test. And the scheme I selected at that time is non-test project scheme. After I select the scheme for Tests, then the error in test project shows.
I fixed this by going into Xcode -> Preferences -> Locations and changing the location of derived data to Default. (Not sure how it became undefaulted)
Similar to Kirby Todd for me it worked to clear the contents of the derived data folder (you can find the path as Kirby said by going to Xcode -> Preferences -> Locations)
Sadly for me, in XCode 7.2 the correct answer was to quit XCode and restart it. Ugh.
I am running a "old" Xcode 3 project in Xcode 4 and code sense is not working for my own classes. I have tried following:
Clean/rebuild
Remove Derived Data
Installing 4.3 documentation
Restart
Without any luck.
Sometimes the code sense works but mostly I just get "No Completions".
Try this:
Open Organizer then Project Tab.
Clear the "Derived Data". Xcode should re-index your project then and code sense should work. At least worked for me.
I know this is late, but for reference: http://sealedabstract.com/code/when-xcode-4s-code-completion-autocomplete-breaks/
Close the project, leaving XCode still running.
Open XCode’s Organizer window, go to the Projects Tab, select the correct project, and hit the Delete button next to “Derived Data”.
Quit XCode.
Navigate to your project’s .xcodeproject file in Finder. Right-click, choose “Show Package Contents.”
Leave the project.pbxproj file, but delete the project.xcworkspace file, any .pbxuser files, and the entire userdata folder.
Open the project in XCode. You will see XCode riding high on the CPU usage for around 10-60 seconds, depending on the size of your project. The activity window will say “Indexing”
When your CPU spike returns to earth, code completion will be working again.
There's a lot of deleting going on there so please be careful, but this definitely worked for me.
I've been doing this, and it's worked multiple times for me (after trying all of the above previously).
Edit: Now I just hit space, backspace (the mac version) and rebuild... works nice. Then, remember to scroll (sometimes the colors don't show up until you scroll somewhere)
Find your prefix file: "ProjectName_prefix.pch".
Comment out some line. (basically change it)
Build your project, doesn't matter if it fails or not.
Uncomment it.
Build again.
I'm betting only step 2 (modify the prefix) is what does it, but these essentially get you back to running. Suddenly everything magically recolors itself and completes functions.
Good luck if that doesn't fix it, perhaps try doing this to your dependency pch files (three20 or FB api's)
Clearing the "Derived Data" only works temporarily for me. I have to do it and then restart Xcode like 3-4 times each day to get code sense working again.
I found out the real cause is in the Target's Build Settings. I moved everything from Header Search Paths to User Header Search Paths and it is fixed. In my case, the framework I'm working with is RestKit.
BTW, I came up with this because I was adding another project (QuickDialog) into my project and I was curious that it is using User Header Search Paths, but not Header Search Paths. Here is the difference between them.
You can able to fix that issue by change build settings like this, PreCompile Prefix Headers :NO
FYI, if one file doesn't have code sense but the rest of your project does, check that its added to a target. Once I did that I got code sense back in that file.
It's been ages but the answer is just to move the code into a new folder and the code sense should be working now.
This happened when I added a new Objective-C Class and the code sense doesn't work only on the newly added .m and .h files (on XCode 4 latest update during this post).
Close all xcode windows
Delete all your projects from xcode>window>organizer and restart your project. It will now sense and index your project properly.
I wrote about it in detail here.
Basically my fix was that with localization. I upgraded from xcode 3.2.5 to xcode 4 and then screwed around with built in interface builder and turned on localization for a XIB file accidently which placed my source files in en.lproj directory. After moving them back to Classes folder it worked perfectly.
Again, for the sake of helping others with this issue which, in my case, happened upon upgrading to Xcode 4.3.
Of course I tried the solutions offered in this post, and none of them worked. But the suggestion to move the location of the project in Finder brought back some Code Sense, but the suggestions didn't make any sense.
I ended up deleting my project and re-cloned it from the git repository.That brougt back Code Sense for me...
I open a second project in the background whenever my Xcode's code sensing stops working (it usually works the first time i open the project but after a while code sense no longer works). So what i do is to open a second project in Xcode. Xcode will start indexing the second project and magically the code sense for my main project is back.
Running Xcode 4.3.1 on Lion
Hope this helps someone.
From this comment here I was able to debug the problem on my end, it seemed to be a bad -w flag that the clang preprocessor wasn't recognizing properly. Basically, running
defaults write com.apple.dt.Xcode IDEIndexingClangInvocationLogLevel 3
in Terminal increases the verbosity of the indexer, and should help you track down issues. Open Console.app and look for messages from Xcode, the search string IDEIndexingClangInvocation helped me find them.
For me it happened simply because the file had no target membership. If the first few answers did not work for you, go to your .m file (presumably it's this file that you're having trouble with), open the Utilities view (Edit -> Utilities -> Show File Inspector) and under "Target Membership" check the target to which you want this file to belong.
In my project, I've include a full "shared" folder by link (not copy) that is outside my project folder.
In the .pch file, I have #import "MyStandardHeader.h"
My Build settings does not have any search path to the "shared" folder.
In the "MyStandardHeader.h", I have #import "NSMutableArrayCustom.h" that is inside a subfolder of "shared".
I use in my code a NSMutableArrayCustom class.
I never include NSMutableArrayCustom.h
I've clean the project, quitted XCode, launched it again, build, run on both iPhone and simulator : everything works fine, but I have a red compile error: MyStandardHeader.h - No such file or directory
I've tried in the build settings Always search user pathat YES and NO, it's the same.
What is the problem? Why do I have this error? How make it disappear?
I tried the steps mentioned above, but to fix the error I had to remove the file from "Copy Bundle Resources" in the project "Build Phases".
I've seen this too: files that clearly exist get wonky. Oddly, sometimes it fixes itself. It may be an Xcode bug, since the build always succeeds. I've had success with touching the file. sometimes a clean helps. and sometimes quitting xcode helps.... Voodoo really.
You could try to remove the index by deleting everything in ~/Library/Developer/Xcode/DerivedData
That directory is a combined version of the old Build and Intermediates directories from Xcode 1,2 and 3. Basically it's all the temporary and generated files from your project: object files, indexes, etc.
Another thing to try -- just deleting Derived Data wasn't working for me, but this did:
Delete Derived Data using the Organizer window, Projects tab.
In your target settings delete the value (path) set for "Prefix Header"
Close XCode and restart. Reload your project. Let it re-index.
Restore the "Prefix Header" setting.
What a major PITA.
If deleting data and Prefix Header path doesn't work then, try to click on the File (that is not found) in the Project Navigator and uncheck the target under Target Membership in File Inspector. Then deleted the files from Project Project Navigator and add again. This is the only thing that worked for me.
Merely closing XCode (6.4) fixed my particular case of this issue. I opened it back up, cleaned the project, and built. Warnings were gone! Before I closed XCode, I cleaned and built and the warnings would not leave. So something about closing XCode did it. Hope this helps others!
I deleted the #import, then moved to a different line and used autocomplete to reenter the import. That error and all others like it disappeared. Strange bug.