I am developing code in Visual Basic 2010 and connecting to Sybase16 databases hosted on two servers. I am referencing Sybase iAnywhere in my project.
I use the connection string shown below
Public dbIMS As New SAConnection
dbIMS.ConnectionString="UserID=userid;Password=userpw;DatabaseName=dbname;ServerName=dbname;Host=192.000.000.000;"
Try
dbims.open()
Catch ex as Exception
strErrMsg=ex.Message.ToString
End Try
I can connect to some databases, but not others. Error message is "Database server not found" All databases are active and the service name and db filename are the same for each database. I can connect to some dbs on each server and as yet have been unable to find anything in common with the successful connections or the failed connections. I am certain the ip address is correct and the db and server names are correct.
I am looking for advice on how to diagnose my problem, and thanks in advance.
Related
Using the basic SqlConnection code below, I have discovered that, at my workstation, I am unable to connect to our Sql Server 2017 deployment via ASP.NET C# code in any given type of Windows-based project, such as Winforms (.NET Framework or Core) or Console apps. However, this code will run without incident in any Web-based project, such as Web Forms or MVC, either using .NET Framework or Core.
protected void testConnection()
{
string con = "Server=MySqlServer;database=MyDatabase;Integrated Security=true";
using (SqlConnection cnn = new SqlConnection(con))
{
cnn.Open();
cnn.Close();
}
}
In a web project, this code runs. In a Windows project, I get this error:
System.Data.SqlClient.SqlException: 'A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)'
In investigating this problem, I have tried the following:
Explicitly declaring the domain on which my SQL server is found (eg. MySqlServer.domain.com). No good.
Explicitly declaring the SQL Server port number, according to the example shown on connectionstrings.com (eg. MySqlServer, 1433). We do use the standard port number, for the record. No good.
Changing the protection level of the test method (protected/private/public). No good.
Connecting to the SQL Server in PowerShell. This connection worked.
Pinging in the SQL Server in a command prompt. The server responded in 1ms consistently.
I have asked other users on this network to test this code in a Winforms project on their workstations. No one is able to reproduce my issue.
Consulted my sysadmin. He is so far not able to find any reason why I should be having this issue.
The only difference I have noticed in all of this is that, when I declare the port number, the Inner Exception returned with the error reads "Win32Exception: A non-recoverable error occurred during a database lookup". Otherwise, it simply reads "Access is Denied."
All of this tells me that the issue is obviously something peculiar to my workstation, but I have no idea what, apart from some firewall or other local security setting that the sysadmin neglected to check. Has anyone encountered this problem?
My VS 2019 installation is only one revision out of date as of this writing, 16.8.3 as opposed to 16.8.4. I am able to connect to and run TSQL code on any database I care to via SSMS. We connect using Windows Authentication. According to the results of "select ##version", our version of SQL Server is 2017, 14.0.3356.20 (x64).
Any insight is appreciated.
We fixed it by forcing Named Pipes to be enabled in SQL Server, as opposed to using the default setting.
I'm trying to connect to an SQL database hosted on Azure from a function app I'm building in Visual Studio but I'm getting the following error:
A network-related or instance-specific error occurred while
establishing a connection to SQL Server. The server was not found or
was not accessible. Verify that the instance name is correct and that
SQL Server is configured to allow remote connections. (provider: TCP
Provider, error: 0 - An attempt was made to access a socket in a way
forbidden by its access permissions.)
I can connect from the same PC using SSMS without a problem. I've tried connecting to the database using data connections in server explorer in VS but I'm getting the same error. If I connect to Azure with my account in server explorer it shows me a selection of services including SQL databases but there are none listed underneath although my account does have access to the database.
Are there any hidden gotchas I'm missing or settings within VS? I've also tried adding my client IP in the firewall settings but that didn't make a difference either.
After doing some more testing it turned out to be the client firewall that was blocking VS and VS Code from connecting to Azure SQL. It seems there was already an exception for SSMS.
The error message states "Verify that the instance name is correct"
It could be that the SSMS is automatically creating a fully qualified name once you say that it is an azure database.
If you use the short name from Visual Studio, then you cannot connect to the SQL server.
For example "myserver.database.windows.net" versus "myserver".
Connection string syntax in web config when connecting to a remote host sql server.
How to write correct connection string if your sql server host is www.xyz.com and we have a sql server instance name or we have a port number for connecting to sql server(when sql server host and service host are different).
I found the answer with comma port number . My issue was in data source of connection string when we using a remote sql server. My sql server remote use port number. with adding ,port number to remote IP or host , the connection is true. ... Data Source = www.xyz.com,1434 ; OR Data Source = www.xyz.com\my instance name,1434 .
It could achieve in the WCF. This is a common scenario, using WCF to CRUD(create,read,update,delete) the database. Ado.net is a common tool for persisting the data. In addition, the Entity Framework is also available in WCF.
https://learn.microsoft.com/en-us/dotnet/framework/data/adonet/ado-net-code-examples
https://learn.microsoft.com/en-us/ef/ef6/get-started
We could take advantage of server explorer in Visual Studio, or the SQL server object explorer. It could generate a proper connection string.
https://www.c-sharpcorner.com/UploadFile/suthish_nair/how-to-generate-or-find-connection-string-from-visual-studio/
https://learn.microsoft.com/en-us/visualstudio/data-tools/add-new-connections?view=vs-2019
As regards the connection string, please check the following for details.
https://www.connectionstrings.com/sql-server/
Feel free to let me know if there is anything I can help with.
I have a database Connection established in odbcad and Microsoft Access (aswell as working in Excel) via ODBC and want to also get it working in Oracle SQL developer.
It is a Windows SQL Server as far as i know and I have tried several Settings, of which None works. I have also installed Driver for ODBC. I would like to Import Settings into SQL developer as applied in MS Access, is there any possibility?
No, SQL Developer is a Java application and uses a JDBC driver.
But if you look at the odbc properties for your connection, those should largely translate to what you need to define a basic connection.
Oracle:
Server name or IP address of the DB, port # for the listener, and the name of the SID or Service, plus a valid username and password is all you need to connect to Oracle.
What error do you get when you try to connect?
Show us what you're trying.
Update:
You're trying to connect to SQL Server but you're getting"
Native SSPI library not loaded
You're trying to use OS Authentication for your connection. For this to work with the jTDS driver, you need to copy a DLL file named ntlmauth.dll (which is for NT authentication) under the jtds-x.x.x-dist\x86\SSO\ or jtds-x.x.x-dist\x64\SSO\, to any directories in the PATH environment.
Please update your question such that's it's clear you're connecting to SQL Server and share the error message so others can find it.
I imagine this question is a duplicate of many previous iterations of the same challenge.
been trying to configure an ADO.NET connection for my Visual Studio application but I am running into issues and having no luck at all troubleshooting them. The major error that I run into is:
A network-related or instance-specific error occurred while establishing a connection to SQL server. The server was not found or not accessible. Verify the instance name is correct and that SQL server is configured to allow remote connections (Error 40: Could not open connection to the SQL server)
The steps I undertook to troubleshoot this are:
1. Open up Sql server configuration manager and under the SQL Server Network Configuration, Protocols for MSSQLSERVER,SQLExpress, SQL server 2008 connection string data source I enable each of the protocol names (Shared memory, Named pipes,TCP/IP,VIA)
As instructed I stop the SQL server services first under the SQL server services nodes.
Now I click start, MSSQL server service starts but both SQL Server 2008 and SQLEXPRESS agents do not. Stating the following:
The request failed or the service did not respond in a timely fashion. Consult the event log or other applicable error logs for details
This might just be the problem as when I attempt to create the connection string , the server name specified is MYWORLD/SQL SERVER 2008. Since the SQL server 2008 agent service refuses to start, the connection fails, leading to the first error message.
Does anybody have any leads on this and can let me know the necessary steps to mitigate this.
The SQL Browser service must be running to connect to a named instance.
Use SQL Servr Configuration Manager under Configuration Tools under Microsot SQL Server 2008 to assign the logon accounts for each service you want to run. Do NOT use any other method to assign user accounts because the correct rights will not be enabled.