boot2docker mount windows share - windows

I am running boot2docker on windows and I am trying to access a shared folder on my host from the VM.
I have executed the following
sudo mkdir /mnt/docktest
sudo mount -t cifs //192.168.24.75/dock /mnt/docktest -o user=username
mount: mounting //192.168.24.75/dock on /mnt/docktest/ failed: Permission denied
sudo mount -t smbfs //192.168.24.75/dock /mnt/docktest -o username=username
mount: mounting //192.168.24.75/dock on /mnt/docktest/ failed: No such device
My host (192.168.24.75) has the folder "dock" shared with access to the user I am supplying.
I have tried adding the password and domain in the command as well to no avail (even though I would rather not have to)
Note: I would rather not share the folder using the VirtualBox shared folders as it would restrict me to be between the host and it's own vm.

the solution was to install cifs-utils using tce-load

Related

Can't mount Windows host directory to Docker container

I'm on Windows 10 Pro with Docker Version 1.12.0-rc3-beta18 (build: 5226). I would like use Docker for PHP development on Windows machine. I tried all possible (I hope) variations of mounting host directory into Docker container:
//c/Users/...
/c/Users/...
//C/Users/...
/c/Users/...
c:/Users/...
c:\Users...
"c:\Users..."
Neither of variants launch container. Yes, docker run creates container and I can see it with docker ps --all. But I can't it start. E.g. I tried simple documentation example:
docker run -d -P -v "C:\temp":/opt/webapp training/webapp python app.py
and
docker logs e030ba0f7807
replays as
python: can't open file 'app.py': [Errno 2] No such file or directory
What happened?
If you are using docker with docker-machine, you would need to register c:\temp first as a shared folder in VirtualBox.
See "docker with shared folder d drive"
From within a docker-machine ssh session:
sudo touch /mnt/sda1/var/lib/boot2docker/bootlocal.sh
Add to that file:
mkdir -p /mnt/temp
mount -t vboxsf -o defaults,uid=`id -u docker`,gid=`id -g docker` temp /mnt/temp
That path would then be accessible through /mnt/temp for instance.
The same applies for C:\Users, which is already a shared folder c/Users.
It is accessible with /c/Users.
With Hyper-V, see "Running Docker on Hyper-V" from Henning M Stephansen:
Hyper-V is a more isolated and restrictive environment than VMWare or VirtualBox is, so there’s no concept of shared folders.
However we can mount and access Windows shares from our Docker VM.
The first thing you need to do is to share a folder. This folder can be restricted to just your user.
If the VM has access to the network through an External Virtual Switch or an Internal Virtual Switch you should be able to mount your folder from the docker VM.
To be able to mount a windows share from Boot2Docker/Tiny Core Linux we need to install some additional module (This might be included in your image):
wget http://distro.ibiblio.org/tinycorelinux/5.x/x86/tcz/cifs-utils.tcz
tce-load -i cifs-utils.tcz
Now we can mount the shared folder using the following command
sudo mount -t cifs //HOST-IP-HERE/SharedFolderPath /path/where/we/want/it/mounted -o username=HOST_USERNAME_HERE

How run Docker with sync folder on Windows

Well using Kitematic on Windows and starting the container hello-world-nginx. I'm totally able to edit the file on Windows and see the modifications at the browser.
But when I create some image and try to edit the file (html), nothing happens.
Here's the command:
docker build -t a-example . && docker run --name a-example -i -t -v //c/Users/pablo/htdocs/www/a-example/src:/www -d -p 80:80 a-example
And here's my Dockerfile:
FROM nginx
RUN mkdir /etc/nginx/logs && touch /etc/nginx/logs/a-example.log
ADD ./nginx.conf /etc/nginx/conf.d/default.conf
ADD /src /www
VOLUME /www
Another question:
Is this message have something to do with?
SECURITY WARNING: You are building a Docker image from Windows against
a non-Win dows Docker host. All files and directories added to build
context will have '-r wxr-xr-x' permissions. It is recommended to
double check and reset permissions f or sensitive files and
directories.
I do not use KiteMatic or Docker Machine to control my local docker instance.
However, Docker Machine uses a boot2docker iso (customized version of Tiny Core Linux with Docker) running in a VirtualBox vm. Virtual Box provides guest Additions to mount host machine folders.
Refer to Boot2Docker guidelines at the time of Docker 1.9.1 release
Or the Docker Machine shares:
On Windows:
- C:\Users mounted as /c/Users
On Linux:
- /home mounted as /hosthome
On OSX:
- /Users mounted as /Users
which is done through Guest Additions:
vbm("sharedfolder", "add", d.MachineName, "--name", shareName, "--hostpath", shareDir, "--automount")
If you opt to use samba shares from your windows host instead, you will need the appropriate TLC packages (from the FAQ):
How do I mount windows shares?
If the sharing computer is at least Windows 2000, you can mount the share with only the filesystems-2.6.29.1-tinycore.tcz extension.
In a root console:
mkdir /mnt/windows
mount -t cifs //9.53.216.11/myshare /mnt/windows -o user=myname,pass=mypassword
And after searching for boot2docker and filesystems-2.6.29.1-tinycore.tcz I got to this GitHub issue:
sudo find / -type d -name 'cifs' seems to indicate that CIFS (Samba) client in the right kernel version is already there... allowing us to run
sudo mount -t cifs //MYPC/hostgithub ~/windows -o user=USER
on the boot2docker VM
Using Docker Volumes
It seems Docker Volumes are a new proposal for handling host folders for Developer Environments, see:
Docker-Volume-Netshare: Although this requires nfs-common or nfs-utils (depending on your distro) to be available on the docker machine, this may not work for CoreOS / Boot2Docker without some other tricks.
It should actually work on boot2docker considering how Docker-Volume-Netshare just wraps shell exec /bin/sh -c "mount -t cifs ..." command. If you use the so0k/mount.cifs_copy on CoreOS you may need a way to specify the path to cifs /opt/bin/mount.cifs.
For Windows users, note also my blog post using the netshare volume driver mentioned above to provision mounts from the Windows host across a Swarm Cluster.
Note: Be careful when using git-for-windows and git-bash as I'm having issues with these converting the paths I pass on to docker.exe
I don't think your volume is available so your container is displaying the static content from /src that you ADDed during the image build.
Kitematic runs a VirtualBox linux machine which runs your docker containers.
The path you have used for the volume: //c/Users/pablo/htdocs/www/a-example/src:/www looks suspect as that's the full windows path.
Docker machine (which is what kitematic uses underneath to manage the virutal machine) will map C:\Users to /Users by default
Try --volume /Users/pablo/htdocs/www/a-example/src:/www

vagrant - constantly syncing folder setup

I am trying build a centos7 vm at my windows10 using virtualbox. I am using cento/7 box.
it by default using rsync for syncing folder and I don't really like it as I would have to open an extra cmd just to run vagrant rsync-auto for constant syncing.
I tried to use nfs but not successful.
Here is my vagrantfile.
Vagrant.configure(2) do |config|
config.vm.box = "centos/7"
config.vm.synced_folder ".", "/home/vagrant/sync", type: "nfs"
end
and when I tried to run it. It gave me this.
Failed to mount folders in Linux guest. This is usually because
the "vboxsf" file system is not available. Please verify that
the guest additions are properly installed in the guest and
can work properly. The command attempted was:
mount -t vboxsf -o uid=`id -u vagrant`,gid=`getent group vagrant | cut -d: -f3` home_vagrant_sync /home/vagrant/sync
mount -t vboxsf -o uid=`id -u vagrant`,gid=`id -g vagrant` home_vagrant_sync /home/vagrant/sync
The error output from the last command was:
mount: unknown filesystem type 'vboxsf'
I noticed that changes made by host will be synced to guest but not the other way round. I want to make the folder like a shared folder both guest and host can apply changes to it. Any best approaches to do it?
Thanks.
The reply you got is telling you to install Virtual Box guest additions. This is a separate installation action you have to perform on top of installing Virtual Box. Did you install Virtual Box Guest Additions?

Mount volume through boot2docker to the postgres container

I'm trying to run the container of postgres image with boot2docker on OSX.
This command works well on my Ubuntu:
docker run -v $(pwd)/data:/var/lib/postgresql/data postgres
but OSX says:
fixing permissions on existing directory /var/lib/postgresql/data ... ok
creating subdirectories ... initdb: could not create directory "/var/lib/postgresql/data/global": Permission denied
initdb: removing contents of data directory "/var/lib/postgresql/data"
chmod doesn't help.
I've tried option --user $(id -u):$(id -g). It breaks container on Ubuntu, and it changes the error on OSX.
Ubuntu: chmod: changing ownership of ‘/var/lib/postgresql/data’: Operation not permitted
OSX: chmod: changing permissions of ‘/run/postgresql’: Operation not permitted
As it works for Ubuntu I want to run it on OSX, without creating my own images.
But I have no idea how to deal with this error.
Any ideas?
I think this is a known boot2docker issue
There's several workarounds but no solution there
#1) Overriding the /Users default share on boot2docker start:
boot2docker --vbox-share=$(pwd)/share-location=share-name up
#2) boot2docker ssh in and mount the custom share:
sudo mount -t vboxsf -o uid=999,gid=50 share-name [SHARE-FULL-PATH]/share-location
Mounting local folders into docker containers is not a good practice. It quite often results into problems with file permissions.
The better solution would be to change your setup using a volume container instead. There are also good concepts for volume container backups.

Boot2Docker on Mac - Accessing Local Files

I've just set up boot2docker on my Mac. How do I go about mounting a local directory on my Mac so that it's accessible all the way through to a running Docker container? Thanks for your help!
As of October 16, 2014, Docker supports mounting directories in the /Users path seamlessly.
From the Docker blog:
With this release we are addressing the most common issue: sharing directories between your Mac and your containers. Using Docker 1.3 with the corresponding version of boot2docker, host-mounted volumes now work the way you expect them to.
...Note that there are still some limitations: for example this feature is limited to boot2docker’s virtualbox configuration, cannot be managed dynamically, and only works for directories in /Users . But we are receiving exciting contributions to improve volume management, so expect this area to improve drastically in the next few releases.
Example usage:
$ docker run -v /Users/bob/myapp/src:/src [...]
boot2docker with share other than /Users
see https://github.com/boot2docker/boot2docker/issues/678.
Share your folder with the VM:
VBoxManage sharedfolder add boot2docker-vm --name /tmp/Work --hostpath /CODE --automount
Based on info found un bootscript.sh, you know that the VM will run a bootlocal.sh script that is in the /var/lib/boot2docker folder, where data persists.
Add a file /var/lib/boot2docker/bootlocal.sh
#!/bin/sh
# bash is not available!
mkdir -p /CODE
mount -t vboxsf /tmp/Work /CODE
Then chmod +x /var/lib/boot2docker/bootlocal.sh and reboot your boot2docker-vm vm.
boot2docker together with VirtualBox Guest Additions
How to mount /Users into boot2docker
https://medium.com/boot2docker-lightweight-linux-for-docker/boot2docker-together-with-virtualbox-guest-additions-da1e3ab2465c
tl;dr Build your own custom boot2docker.iso with VirtualBox Guest
Additions (see link) or download
http://static.dockerfiles.io/boot2docker-v1.0.1-virtualbox-guest-additions-v4.3.12.iso
and save it to ~/.boot2docker/boot2docker.iso.
As Levi mentioned, the /Users directory is auto-mounted. This is true in both boot2docker and docker-machine. That said, if you want to mount anything outside of /Users, all the current answers talk about Boot2docker. Since that's now deprecated in favor of docker-machine, this works for docker-machine:
First, ssh into the docker-machine vm and create the folder we'll be mapping to:
docker-machine ssh $MACHINE_NAME "sudo mkdir -p \"$VOL_DIR\""
Now share the folder to VirtualBox:
WORKDIR=$(basename "$VOL_DIR")
vboxmanage sharedfolder add "$MACHINE_NAME" --name "$WORKDIR" --hostpath "$VOL_DIR" --transient
Finally, ssh into the docker-machine again and mount the folder we just shared:
docker-machine ssh $MACHINE_NAME "sudo mount -t vboxsf -o uid=\"$U\",gid=\"$G\" \"$WORKDIR\" \"$VOL_DIR\""
Note: for UID and GID you can basically use whatever integers as long as they're not already taken.
This is tested as of docker-machine 0.4.1 and docker 1.8.3 on OS X El Capitan.

Resources