SQL Group by and having in coherence - caching

I would like to execute the following query in Coherence
Select AVG(Salary)
, Count(*)
from Employees
group by Company
Having AVG(Salary)> 1000
I was trying to use GroupAggregators but I have problem with refering to an avarage salary as it is not defined in the Employee Class but in Aggregator:
GroupAggregator high_salary = GroupAggregator.createInstance("getDepartment"
, new DoubleAverage("getSalary")
, new GreaterFilter("DoubleAverage", 1000));
How can I do this?

You should use IdentityExtractor.INSTANCE instead of "DoubleAverage" as a value extractor in GreaterFilter, because value passed to this filter is the avarage salary itself, not some object with "DoubleAverage" property.
But if you would like to get avarage salary as well as count (that would be consistent with your SQL query), you will have to use CompositeAggregator. In that case the value passed to the filter will not be a number anymore, but a List and you will have to use ValueExtractor that will extract avarage salary from this list. In Coherence 12.2.1 it would look like this:
DoubleAverage<Employee> avgSalary = new DoubleAverage<>(Employee::getSalary);
Count<String, Employee> count = new Count<>();
CompositeAggregator<String, Country> compositeAggregator = CompositeAggregator
.createInstance(new InvocableMap.EntryAggregator[] { avgSalary, count });
ValueExtractor<Object, ? extends Double> salaryExtractor =
list -> ((List<Number>) list).get(0).doubleValue();
Filter having = Filters.greater(salaryExtractor, 1000.0);
GroupAggregator<String, Country, Employee, String, List> groupAggregator =
GroupAggregator.createInstance(Employee::getDepartment, compositeAggregator, having);
It can be done also in older versions, but it would require some more work to implement salaryExtractor without using lambda expression.

Related

How to pass dynamic value from java to sql(db2) IN statement [duplicate]

What are the best workarounds for using a SQL IN clause with instances of java.sql.PreparedStatement, which is not supported for multiple values due to SQL injection attack security issues: One ? placeholder represents one value, rather than a list of values.
Consider the following SQL statement:
SELECT my_column FROM my_table where search_column IN (?)
Using preparedStatement.setString( 1, "'A', 'B', 'C'" ); is essentially a non-working attempt at a workaround of the reasons for using ? in the first place.
What workarounds are available?
An analysis of the various options available, and the pros and cons of each is available in Jeanne Boyarsky's Batching Select Statements in JDBC entry on JavaRanch Journal.
The suggested options are:
Prepare SELECT my_column FROM my_table WHERE search_column = ?, execute it for each value and UNION the results client-side. Requires only one prepared statement. Slow and painful.
Prepare SELECT my_column FROM my_table WHERE search_column IN (?,?,?) and execute it. Requires one prepared statement per size-of-IN-list. Fast and obvious.
Prepare SELECT my_column FROM my_table WHERE search_column = ? ; SELECT my_column FROM my_table WHERE search_column = ? ; ... and execute it. [Or use UNION ALL in place of those semicolons. --ed] Requires one prepared statement per size-of-IN-list. Stupidly slow, strictly worse than WHERE search_column IN (?,?,?), so I don't know why the blogger even suggested it.
Use a stored procedure to construct the result set.
Prepare N different size-of-IN-list queries; say, with 2, 10, and 50 values. To search for an IN-list with 6 different values, populate the size-10 query so that it looks like SELECT my_column FROM my_table WHERE search_column IN (1,2,3,4,5,6,6,6,6,6). Any decent server will optimize out the duplicate values before running the query.
None of these options are ideal.
The best option if you are using JDBC4 and a server that supports x = ANY(y), is to use PreparedStatement.setArray as described in Boris's anwser.
There doesn't seem to be any way to make setArray work with IN-lists, though.
Sometimes SQL statements are loaded at runtime (e.g., from a properties file) but require a variable number of parameters. In such cases, first define the query:
query=SELECT * FROM table t WHERE t.column IN (?)
Next, load the query. Then determine the number of parameters prior to running it. Once the parameter count is known, run:
sql = any( sql, count );
For example:
/**
* Converts a SQL statement containing exactly one IN clause to an IN clause
* using multiple comma-delimited parameters.
*
* #param sql The SQL statement string with one IN clause.
* #param params The number of parameters the SQL statement requires.
* #return The SQL statement with (?) replaced with multiple parameter
* placeholders.
*/
public static String any(String sql, final int params) {
// Create a comma-delimited list based on the number of parameters.
final StringBuilder sb = new StringBuilder(
String.join(", ", Collections.nCopies(possibleValue.size(), "?")));
// For more than 1 parameter, replace the single parameter with
// multiple parameter placeholders.
if (sb.length() > 1) {
sql = sql.replace("(?)", "(" + sb + ")");
}
// Return the modified comma-delimited list of parameters.
return sql;
}
For certain databases where passing an array via the JDBC 4 specification is unsupported, this method can facilitate transforming the slow = ? into the faster IN (?) clause condition, which can then be expanded by calling the any method.
Solution for PostgreSQL:
final PreparedStatement statement = connection.prepareStatement(
"SELECT my_column FROM my_table where search_column = ANY (?)"
);
final String[] values = getValues();
statement.setArray(1, connection.createArrayOf("text", values));
try (ResultSet rs = statement.executeQuery()) {
while(rs.next()) {
// do some...
}
}
or
final PreparedStatement statement = connection.prepareStatement(
"SELECT my_column FROM my_table " +
"where search_column IN (SELECT * FROM unnest(?))"
);
final String[] values = getValues();
statement.setArray(1, connection.createArrayOf("text", values));
try (ResultSet rs = statement.executeQuery()) {
while(rs.next()) {
// do some...
}
}
No simple way AFAIK.
If the target is to keep statement cache ratio high (i.e to not create a statement per every parameter count), you may do the following:
create a statement with a few (e.g. 10) parameters:
... WHERE A IN (?,?,?,?,?,?,?,?,?,?) ...
Bind all actuall parameters
setString(1,"foo");
setString(2,"bar");
Bind the rest as NULL
setNull(3,Types.VARCHAR)
...
setNull(10,Types.VARCHAR)
NULL never matches anything, so it gets optimized out by the SQL plan builder.
The logic is easy to automate when you pass a List into a DAO function:
while( i < param.size() ) {
ps.setString(i+1,param.get(i));
i++;
}
while( i < MAX_PARAMS ) {
ps.setNull(i+1,Types.VARCHAR);
i++;
}
You can use Collections.nCopies to generate a collection of placeholders and join them using String.join:
List<String> params = getParams();
String placeHolders = String.join(",", Collections.nCopies(params.size(), "?"));
String sql = "select * from your_table where some_column in (" + placeHolders + ")";
try ( Connection connection = getConnection();
PreparedStatement ps = connection.prepareStatement(sql)) {
int i = 1;
for (String param : params) {
ps.setString(i++, param);
}
/*
* Execute query/do stuff
*/
}
An unpleasant work-around, but certainly feasible is to use a nested query. Create a temporary table MYVALUES with a column in it. Insert your list of values into the MYVALUES table. Then execute
select my_column from my_table where search_column in ( SELECT value FROM MYVALUES )
Ugly, but a viable alternative if your list of values is very large.
This technique has the added advantage of potentially better query plans from the optimizer (check a page for multiple values, tablescan only once instead once per value, etc) may save on overhead if your database doesn't cache prepared statements. Your "INSERTS" would need to be done in batch and the MYVALUES table may need to be tweaked to have minimal locking or other high-overhead protections.
Limitations of the in() operator is the root of all evil.
It works for trivial cases, and you can extend it with "automatic generation of the prepared statement" however it is always having its limits.
if you're creating a statement with variable number of parameters, that will make an sql parse overhead at each call
on many platforms, the number of parameters of in() operator are limited
on all platforms, total SQL text size is limited, making impossible for sending down 2000 placeholders for the in params
sending down bind variables of 1000-10k is not possible, as the JDBC driver is having its limitations
The in() approach can be good enough for some cases, but not rocket proof :)
The rocket-proof solution is to pass the arbitrary number of parameters in a separate call (by passing a clob of params, for example), and then have a view (or any other way) to represent them in SQL and use in your where criteria.
A brute-force variant is here http://tkyte.blogspot.hu/2006/06/varying-in-lists.html
However if you can use PL/SQL, this mess can become pretty neat.
function getCustomers(in_customerIdList clob) return sys_refcursor is
begin
aux_in_list.parse(in_customerIdList);
open res for
select *
from customer c,
in_list v
where c.customer_id=v.token;
return res;
end;
Then you can pass arbitrary number of comma separated customer ids in the parameter, and:
will get no parse delay, as the SQL for select is stable
no pipelined functions complexity - it is just one query
the SQL is using a simple join, instead of an IN operator, which is quite fast
after all, it is a good rule of thumb of not hitting the database with any plain select or DML, since it is Oracle, which offers lightyears of more than MySQL or similar simple database engines. PL/SQL allows you to hide the storage model from your application domain model in an effective way.
The trick here is:
we need a call which accepts the long string, and store somewhere where the db session can access to it (e.g. simple package variable, or dbms_session.set_context)
then we need a view which can parse this to rows
and then you have a view which contains the ids you're querying, so all you need is a simple join to the table queried.
The view looks like:
create or replace view in_list
as
select
trim( substr (txt,
instr (txt, ',', 1, level ) + 1,
instr (txt, ',', 1, level+1)
- instr (txt, ',', 1, level) -1 ) ) as token
from (select ','||aux_in_list.getpayload||',' txt from dual)
connect by level <= length(aux_in_list.getpayload)-length(replace(aux_in_list.getpayload,',',''))+1
where aux_in_list.getpayload refers to the original input string.
A possible approach would be to pass pl/sql arrays (supported by Oracle only), however you can't use those in pure SQL, therefore a conversion step is always needed. The conversion can not be done in SQL, so after all, passing a clob with all parameters in string and converting it witin a view is the most efficient solution.
Here's how I solved it in my own application. Ideally, you should use a StringBuilder instead of using + for Strings.
String inParenthesis = "(?";
for(int i = 1;i < myList.size();i++) {
inParenthesis += ", ?";
}
inParenthesis += ")";
try(PreparedStatement statement = SQLite.connection.prepareStatement(
String.format("UPDATE table SET value='WINNER' WHERE startTime=? AND name=? AND traderIdx=? AND someValue IN %s", inParenthesis))) {
int x = 1;
statement.setLong(x++, race.startTime);
statement.setString(x++, race.name);
statement.setInt(x++, traderIdx);
for(String str : race.betFair.winners) {
statement.setString(x++, str);
}
int effected = statement.executeUpdate();
}
Using a variable like x above instead of concrete numbers helps a lot if you decide to change the query at a later time.
I've never tried it, but would .setArray() do what you're looking for?
Update: Evidently not. setArray only seems to work with a java.sql.Array that comes from an ARRAY column that you've retrieved from a previous query, or a subquery with an ARRAY column.
My workaround is:
create or replace type split_tbl as table of varchar(32767);
/
create or replace function split
(
p_list varchar2,
p_del varchar2 := ','
) return split_tbl pipelined
is
l_idx pls_integer;
l_list varchar2(32767) := p_list;
l_value varchar2(32767);
begin
loop
l_idx := instr(l_list,p_del);
if l_idx > 0 then
pipe row(substr(l_list,1,l_idx-1));
l_list := substr(l_list,l_idx+length(p_del));
else
pipe row(l_list);
exit;
end if;
end loop;
return;
end split;
/
Now you can use one variable to obtain some values in a table:
select * from table(split('one,two,three'))
one
two
three
select * from TABLE1 where COL1 in (select * from table(split('value1,value2')))
value1 AAA
value2 BBB
So, the prepared statement could be:
"select * from TABLE where COL in (select * from table(split(?)))"
Regards,
Javier Ibanez
I suppose you could (using basic string manipulation) generate the query string in the PreparedStatement to have a number of ?'s matching the number of items in your list.
Of course if you're doing that you're just a step away from generating a giant chained OR in your query, but without having the right number of ? in the query string, I don't see how else you can work around this.
You could use setArray method as mentioned in this javadoc:
PreparedStatement statement = connection.prepareStatement("Select * from emp where field in (?)");
Array array = statement.getConnection().createArrayOf("VARCHAR", new Object[]{"E1", "E2","E3"});
statement.setArray(1, array);
ResultSet rs = statement.executeQuery();
Here's a complete solution in Java to create the prepared statement for you:
/*usage:
Util u = new Util(500); //500 items per bracket.
String sqlBefore = "select * from myTable where (";
List<Integer> values = new ArrayList<Integer>(Arrays.asList(1,2,4,5));
string sqlAfter = ") and foo = 'bar'";
PreparedStatement ps = u.prepareStatements(sqlBefore, values, sqlAfter, connection, "someId");
*/
import java.sql.Connection;
import java.sql.PreparedStatement;
import java.sql.SQLException;
import java.util.ArrayList;
import java.util.List;
public class Util {
private int numValuesInClause;
public Util(int numValuesInClause) {
super();
this.numValuesInClause = numValuesInClause;
}
public int getNumValuesInClause() {
return numValuesInClause;
}
public void setNumValuesInClause(int numValuesInClause) {
this.numValuesInClause = numValuesInClause;
}
/** Split a given list into a list of lists for the given size of numValuesInClause*/
public List<List<Integer>> splitList(
List<Integer> values) {
List<List<Integer>> newList = new ArrayList<List<Integer>>();
while (values.size() > numValuesInClause) {
List<Integer> sublist = values.subList(0,numValuesInClause);
List<Integer> values2 = values.subList(numValuesInClause, values.size());
values = values2;
newList.add( sublist);
}
newList.add(values);
return newList;
}
/**
* Generates a series of split out in clause statements.
* #param sqlBefore ""select * from dual where ("
* #param values [1,2,3,4,5,6,7,8,9,10]
* #param "sqlAfter ) and id = 5"
* #return "select * from dual where (id in (1,2,3) or id in (4,5,6) or id in (7,8,9) or id in (10)"
*/
public String genInClauseSql(String sqlBefore, List<Integer> values,
String sqlAfter, String identifier)
{
List<List<Integer>> newLists = splitList(values);
String stmt = sqlBefore;
/* now generate the in clause for each list */
int j = 0; /* keep track of list:newLists index */
for (List<Integer> list : newLists) {
stmt = stmt + identifier +" in (";
StringBuilder innerBuilder = new StringBuilder();
for (int i = 0; i < list.size(); i++) {
innerBuilder.append("?,");
}
String inClause = innerBuilder.deleteCharAt(
innerBuilder.length() - 1).toString();
stmt = stmt + inClause;
stmt = stmt + ")";
if (++j < newLists.size()) {
stmt = stmt + " OR ";
}
}
stmt = stmt + sqlAfter;
return stmt;
}
/**
* Method to convert your SQL and a list of ID into a safe prepared
* statements
*
* #throws SQLException
*/
public PreparedStatement prepareStatements(String sqlBefore,
ArrayList<Integer> values, String sqlAfter, Connection c, String identifier)
throws SQLException {
/* First split our potentially big list into lots of lists */
String stmt = genInClauseSql(sqlBefore, values, sqlAfter, identifier);
PreparedStatement ps = c.prepareStatement(stmt);
int i = 1;
for (int val : values)
{
ps.setInt(i++, val);
}
return ps;
}
}
Spring allows passing java.util.Lists to NamedParameterJdbcTemplate , which automates the generation of (?, ?, ?, ..., ?), as appropriate for the number of arguments.
For Oracle, this blog posting discusses the use of oracle.sql.ARRAY (Connection.createArrayOf doesn't work with Oracle). For this you have to modify your SQL statement:
SELECT my_column FROM my_table where search_column IN (select COLUMN_VALUE from table(?))
The oracle table function transforms the passed array into a table like value usable in the IN statement.
try using the instr function?
select my_column from my_table where instr(?, ','||search_column||',') > 0
then
ps.setString(1, ",A,B,C,");
Admittedly this is a bit of a dirty hack, but it does reduce the opportunities for sql injection. Works in oracle anyway.
Sormula supports SQL IN operator by allowing you to supply a java.util.Collection object as a parameter. It creates a prepared statement with a ? for each of the elements the collection. See Example 4 (SQL in example is a comment to clarify what is created but is not used by Sormula).
Generate the query string in the PreparedStatement to have a number of ?'s matching the number of items in your list. Here's an example:
public void myQuery(List<String> items, int other) {
...
String q4in = generateQsForIn(items.size());
String sql = "select * from stuff where foo in ( " + q4in + " ) and bar = ?";
PreparedStatement ps = connection.prepareStatement(sql);
int i = 1;
for (String item : items) {
ps.setString(i++, item);
}
ps.setInt(i++, other);
ResultSet rs = ps.executeQuery();
...
}
private String generateQsForIn(int numQs) {
String items = "";
for (int i = 0; i < numQs; i++) {
if (i != 0) items += ", ";
items += "?";
}
return items;
}
instead of using
SELECT my_column FROM my_table where search_column IN (?)
use the Sql Statement as
select id, name from users where id in (?, ?, ?)
and
preparedStatement.setString( 1, 'A');
preparedStatement.setString( 2,'B');
preparedStatement.setString( 3, 'C');
or use a stored procedure this would be the best solution, since the sql statements will be compiled and stored in DataBase server
I came across a number of limitations related to prepared statement:
The prepared statements are cached only inside the same session (Postgres), so it will really work only with connection pooling
A lot of different prepared statements as proposed by #BalusC may cause the cache to overfill and previously cached statements will be dropped
The query has to be optimized and use indices. Sounds obvious, however e.g. the ANY(ARRAY...) statement proposed by #Boris in one of the top answers cannot use indices and query will be slow despite caching
The prepared statement caches the query plan as well and the actual values of any parameters specified in the statement are unavailable.
Among the proposed solutions I would choose the one that doesn't decrease the query performance and makes the less number of queries. This will be the #4 (batching few queries) from the #Don link or specifying NULL values for unneeded '?' marks as proposed by #Vladimir Dyuzhev
SetArray is the best solution but its not available for many older drivers. The following workaround can be used in java8
String baseQuery ="SELECT my_column FROM my_table where search_column IN (%s)"
String markersString = inputArray.stream().map(e -> "?").collect(joining(","));
String sqlQuery = String.format(baseSQL, markersString);
//Now create Prepared Statement and use loop to Set entries
int index=1;
for (String input : inputArray) {
preparedStatement.setString(index++, input);
}
This solution is better than other ugly while loop solutions where the query string is built by manual iterations
I just worked out a PostgreSQL-specific option for this. It's a bit of a hack, and comes with its own pros and cons and limitations, but it seems to work and isn't limited to a specific development language, platform, or PG driver.
The trick of course is to find a way to pass an arbitrary length collection of values as a single parameter, and have the db recognize it as multiple values. The solution I have working is to construct a delimited string from the values in the collection, pass that string as a single parameter, and use string_to_array() with the requisite casting for PostgreSQL to properly make use of it.
So if you want to search for "foo", "blah", and "abc", you might concatenate them together into a single string as: 'foo,blah,abc'. Here's the straight SQL:
select column from table
where search_column = any (string_to_array('foo,blah,abc', ',')::text[]);
You would obviously change the explicit cast to whatever you wanted your resulting value array to be -- int, text, uuid, etc. And because the function is taking a single string value (or two I suppose, if you want to customize the delimiter as well), you can pass it as a parameter in a prepared statement:
select column from table
where search_column = any (string_to_array($1, ',')::text[]);
This is even flexible enough to support things like LIKE comparisons:
select column from table
where search_column like any (string_to_array('foo%,blah%,abc%', ',')::text[]);
Again, no question it's a hack, but it works and allows you to still use pre-compiled prepared statements that take *ahem* discrete parameters, with the accompanying security and (maybe) performance benefits. Is it advisable and actually performant? Naturally, it depends, as you've got string parsing and possibly casting going on before your query even runs. If you're expecting to send three, five, a few dozen values, sure, it's probably fine. A few thousand? Yeah, maybe not so much. YMMV, limitations and exclusions apply, no warranty express or implied.
But it works.
No one else seems to have suggested using an off-the-shelf query builder yet, like jOOQ or QueryDSL or even Criteria Query that manage dynamic IN lists out of the box, possibly including the management of all edge cases that may arise, such as:
Running into Oracle's maximum of 1000 elements per IN list (irrespective of the number of bind values)
Running into any driver's maximum number of bind values, which I've documented in this answer
Running into cursor cache contention problems because too many distinct SQL strings are "hard parsed" and execution plans cannot be cached anymore (jOOQ and since recently also Hibernate work around this by offering IN list padding)
(Disclaimer: I work for the company behind jOOQ)
Just for completeness: So long as the set of values is not too large, you could also simply string-construct a statement like
... WHERE tab.col = ? OR tab.col = ? OR tab.col = ?
which you could then pass to prepare(), and then use setXXX() in a loop to set all the values. This looks yucky, but many "big" commercial systems routinely do this kind of thing until they hit DB-specific limits, such as 32 KB (I think it is) for statements in Oracle.
Of course you need to ensure that the set will never be unreasonably large, or do error trapping in the event that it is.
Following Adam's idea. Make your prepared statement sort of select my_column from my_table where search_column in (#)
Create a String x and fill it with a number of "?,?,?" depending on your list of values
Then just change the # in the query for your new String x an populate
There are different alternative approaches that we can use for IN clause in PreparedStatement.
Using Single Queries - slowest performance and resource intensive
Using StoredProcedure - Fastest but database specific
Creating dynamic query for PreparedStatement - Good Performance but doesn't get benefit of caching and PreparedStatement is recompiled every time.
Use NULL in PreparedStatement queries - Optimal performance, works great when you know the limit of IN clause arguments. If there is no limit, then you can execute queries in batch.
Sample code snippet is;
int i = 1;
for(; i <=ids.length; i++){
ps.setInt(i, ids[i-1]);
}
//set null for remaining ones
for(; i<=PARAM_SIZE;i++){
ps.setNull(i, java.sql.Types.INTEGER);
}
You can check more details about these alternative approaches here.
For some situations regexp might help.
Here is an example I've checked on Oracle, and it works.
select * from my_table where REGEXP_LIKE (search_column, 'value1|value2')
But there is a number of drawbacks with it:
Any column it applied should be converted to varchar/char, at least implicitly.
Need to be careful with special characters.
It can slow down performance - in my case IN version uses index and range scan, and REGEXP version do full scan.
After examining various solutions in different forums and not finding a good solution, I feel the below hack I came up with, is the easiest to follow and code:
Example: Suppose you have multiple parameters to pass in the 'IN' clause. Just put a dummy String inside the 'IN' clause, say, "PARAM" do denote the list of parameters that will be coming in the place of this dummy String.
select * from TABLE_A where ATTR IN (PARAM);
You can collect all the parameters into a single String variable in your Java code. This can be done as follows:
String param1 = "X";
String param2 = "Y";
String param1 = param1.append(",").append(param2);
You can append all your parameters separated by commas into a single String variable, 'param1', in our case.
After collecting all the parameters into a single String you can just replace the dummy text in your query, i.e., "PARAM" in this case, with the parameter String, i.e., param1. Here is what you need to do:
String query = query.replaceFirst("PARAM",param1); where we have the value of query as
query = "select * from TABLE_A where ATTR IN (PARAM)";
You can now execute your query using the executeQuery() method. Just make sure that you don't have the word "PARAM" in your query anywhere. You can use a combination of special characters and alphabets instead of the word "PARAM" in order to make sure that there is no possibility of such a word coming in the query. Hope you got the solution.
Note: Though this is not a prepared query, it does the work that I wanted my code to do.
Just for completeness and because I did not see anyone else suggest it:
Before implementing any of the complicated suggestions above consider if SQL injection is indeed a problem in your scenario.
In many cases the value provided to IN (...) is a list of ids that have been generated in a way that you can be sure that no injection is possible... (e.g. the results of a previous select some_id from some_table where some_condition.)
If that is the case you might just concatenate this value and not use the services or the prepared statement for it or use them for other parameters of this query.
query="select f1,f2 from t1 where f3=? and f2 in (" + sListOfIds + ");";
PreparedStatement doesn't provide any good way to deal with SQL IN clause. Per http://www.javaranch.com/journal/200510/Journal200510.jsp#a2 "You can't substitute things that are meant to become part of the SQL statement. This is necessary because if the SQL itself can change, the driver can't precompile the statement. It also has the nice side effect of preventing SQL injection attacks." I ended up using following approach:
String query = "SELECT my_column FROM my_table where search_column IN ($searchColumns)";
query = query.replace("$searchColumns", "'A', 'B', 'C'");
Statement stmt = connection.createStatement();
boolean hasResults = stmt.execute(query);
do {
if (hasResults)
return stmt.getResultSet();
hasResults = stmt.getMoreResults();
} while (hasResults || stmt.getUpdateCount() != -1);
OK, so I couldn't remember exactly how (or where) I did this before so I came to stack overflow to quickly find the answer. I was surprised I couldn't.
So, how I got around the IN problem a long time ago was with a statement like this:
where myColumn in ( select regexp_substr(:myList,'[^,]+', 1, level) from dual connect by regexp_substr(:myList, '[^,]+', 1, level) is not null)
set the myList parameter as a comma delimited string: A,B,C,D...
Note: You have to set the parameter twice!
This is not the ideal practice, yet it's simple and works well for me most of the time.
where ? like concat( "%|", TABLE_ID , "|%" )
Then you pass through ? the IDs in this way: |1|,|2|,|3|,...|

Using the result of one LINQ query as the parameter for the next

I'm trying to use the result of one LINQ query to be the parameter for the next part of a LINQ query, but to keep it all within one overall query.
For example, my (not-working) code looks like this
List<Categories> myCats = (from city in myCities
where city.CityName == myCityName
select city
from ids in city.IDs
where ids != 4
select ids).ToList();
Can this feed the result to be the be start of the next query be performed in this fashion and if it can, what am I missing to get this to work?
city.IDs is an int array
Unless you're actually trying to create a new projection, you can simply avoid using a select until the end.
List<Categories> myCats = (from city in myCities
where city.CityName == myCityName
//select city
from ids in city.IDs
where ids != 4
select ids).ToList();
I personally like breaking up my queries into pieces:
var matchingCities = from city in myCities
where city.CityName == myCityName
select city;
var matchingCityIds = (from city in matchingCities
from id in city.IDs
select id).ToList();
This approach has two main advantages:
The variable names give you automatic "documentation", allowing other developers to see what the intent of each transformation is.
It's easier to debug because you can step over each transformation and verify that you got the results you wanted.
If you really do need to follow one select by another, though, you can use the into keyword to chain the queries together.
List<Categories> myCats = (from city in myCities
where city.CityName == myCityName
// Not typically recommended
select city.IDs into cityIDs
from id in cityIDs
where id != 4
select id).ToList();

hadoop cascading how to get top N tuples

New to cascading, trying to find out a way to get top N tuples based on a sort/order. for example, I'd like to know the top 100 first names people are using.
here's what I can do similar in teradata sql:
select top 100 first_name, num_records
from
(select first_name, count(1) as num_records
from table_1
group by first_name) a
order by num_records DESC
Here's similar in hadoop pig
a = load 'table_1' as (first_name:chararray, last_name:chararray);
b = foreach (group a by first_name) generate group as first_name, COUNT(a) as num_records;
c = order b by num_records DESC;
d = limit c 100;
It seems very easy to do in SQL or Pig, but having a hard time try to find a way to do it in cascading. Please advise!
Assuming you just need the Pipe set up on how to do this:
In Cascading 2.1.6,
Pipe firstNamePipe = new GroupBy("topFirstNames", InPipe,
new Fields("first_name"),
);
firstNamePipe = new Every(firstNamePipe, new Fields("first_name"),
new Count("num_records"), Fields.All);
firstNamePipe = new GroupBy(firstNamePipe,
new Fields("first_name"),
new Fields("num_records"),
true); //where true is descending order
firstNamePipe = new Every(firstNamePipe, new Fields("first_name", "num_records")
new First(Fields.Args, 100), Fields.All)
Where InPipe is formed with your incoming tap that holds the tuple data that you are referencing above. Namely, "first_name". "num_records" is created when new Count() is called.
If you have the "num_records" and "first_name" data in separate taps (tables or files) then you can set up two pipes that point to those two Tap sources and join them using CoGroup.
The definitions I used were are from Cascading 2.1.6:
GroupBy(String groupName, Pipe pipe, Fields groupFields, Fields sortFields, boolean reverseOrder)
Count(Fields fieldDeclaration)
First(Fields fieldDeclaration, int firstN)
Method 1
Use a GroupBy and group them base on the columns required and u can make use of secondary sorting that is provided by the cascading ,by default it provies them in ascending order ,if we want them in descing order we can do them by reverseorder()
To get the TOP n tuples or rows
Its quite simple just use a static variable count in FILTER and increment it by 1 for each tuple count value increases by 1 and check weather it is greater than N
return true when count value is greater than N or else return false
this will provide the ouput with first N tuples
method 2
cascading provides an inbuit function unique which returns firstNbuffer
see the below link
http://docs.cascading.org/cascading/2.2/javadoc/cascading/pipe/assembly/Unique.html

How to query and calculate dates in the where clause of a LINQ statement?

I am having trouble with the following piece of code. Before I paste it, Let me give a bit of history on what should happen.
I have a model containing 2 fields of interest at the moment, which is the name of the order the customer placed, and the date at which he/she placed it. A pre-calculated date will be used to query the dateplaced field (and should only query the dates , and not the time). The query counts the amount of duplicates that occur in the MondayOrder field, and groups them together. Now , when I exclude the where clause which should query the dates, the query runs great. However, The goal of this query is to count the amount of orders for the following week based on the date the order has been placed.
List<string> returnlist = new List<string>();
DateTime dt = getNextWeekMondaysDate().Date;
switch (day)
{
case DayOfWeek.Monday:
{
var CountOrders =
from x in Data.EntityDB.Orders
group x by x.MondayOrder into m
let count = m.Count()
select new
{
MondayOrderItem = m.Key, Amount = count
};
foreach (var item in CountOrders)
{
returnlist.Add(item.MondayOrderItem + " : " +
item.Amount);
}
}
break;
The getNextWeekMondaysDate() method has an overload which I can use, where if I supply it a date, it will get the following Monday's date from the parameter given. The problem is though, LINQ does not accept queries such as the following:
var CountOrders =
from x in Data.EntityDB.Orders
where getNextWeekMondaysDate(x.DatePlaced.Value).Date == dt
group x by x.MondayOrder into m
let count = m.Count()
select new { MondayOrderItem = m.Key, Amount = count };
This is exactly what I must achieve. Is there any workaround for this situation?
UPDATE
Here is the exception I get when I try the 2nd query.
LINQ to Entities does not recognize the method 'System.DateTime getNextWeekMondaysDate(System.DateTime)' method, and this method cannot be translated into a store expression.
You cannot do this directly, as user-defined method calls cannot be translated to SQL by the EF query provider. The provider recognizes a limited set of .NET methods that can be translated to SQL and also a number of canonical functions as well. Anything that cannot be expressed using these methods only is off-limits unless you write your own query provider (which is only theoretically an option).
As a practical workaround, you can calculate an appropriate range for x.DatePlaced.Value in code before the query and then use specific DateTime values on the where clause.
As an intellectual exercise, note that this method is recognized by the query provider and can be used as part of the expression. So this abomination should work too:
var CountOrders =
from x in Data.EntityDB.Orders
where EntityFunctions.AddDays(
x.DatePlaced.Date.Value,
(9 - DateAndTime.DatePart(DateInterval.WeekDay, x.DatePlaced.Value)) % 7)
.Date == dt
group x by x.MondayOrder into m
let count = m.Count()
select new { MondayOrderItem = m.Key, Amount = count };
Linq to Entities doesn't know how to convert arbitrary C# methods into SQL - it's not possible in general.
So, you have to work with the methods it does understand.
In this case, you could do something like this:
DateTime weekBegin = CalculateWeekBegin( dt );
DateTime weekEnd = CalculateWeekEnd( dt );
var CountOrders =
from x in Data.EntityDB.Orders
where x.DatePlaced.Value >= weekBegin && x.DatePlaced.Value < weekEnd
group x by x.MondayOrder into m
let count = m.Count()
select new { MondayOrderItem = m.Key, Amount = count });

Get Random Rows Using JPQL

Is it possible to use JPQL for getting random rows? For example in SQL Server I would use:
select * from myTable where columnName = 4 order by newid()
Thanks,
Rod
This is what I use. I first get the number of rows for the entity and I then limit the results of the fetch query to a random row. This involves two queries, so if this is a problem for you you might want to watch native queries. If not here is the code I use:
public <T> T randomEntity(EntityManager em, Class<T> clazz) {
Query countQuery = em.createQuery("select count(id) from "+clazz.getName());
long count = (Long)countQuery.getSingleResult();
Random random = new Random();
int number = random.nextInt((int)count);
Query selectQuery = em.createQuery("from "+clazz.getName());
selectQuery.setFirstResult(number);
selectQuery.setMaxResults(1);
return (T)selectQuery.getSingleResult();
}
As of today (April 9th 2010), JPQL does not support random ordering

Resources