Sometimes when i run my script, the error "File some object wasn't found" yet it works most of the time (I haven't changed the path at all).
display dialog "Virus is downloading." buttons "Stop Download" with title "Malware Initiating" with icon alias ((path to me) & "Contents:Resources:Spy.icns" as string)
The error is for the icon and it highlights ((path to me) as the error.
Can anyone tell me why this happens? thanks
What I see you did:
((path to me) & "Contents:Resources:Spy.icns" as string)
What I found on the net as a correct solution:
((path to me as text) & "::")
The difference is that in your case, you are letting your script decide what datatype to use at (path to me) and then convert it to string, while the net's version decides in the code that it should be text in advance.
Usually your version goes well. The system has enough time to interpret what's needed. What I noticed with applescript, is that it often just hangs up on itself if the system is busy doing stuff. So putting some matters(like type conversion) into your algorithm makes it more stable.
So to make it more clear what happens behind the scenes.
Your code:
Take path to script as 'path type'
Take text "Contents:Resources:Spy.icns"
Add 1 and 2 together
Take selection and make it text
Net's code:
Take path to script as 'path type'
Make path to script text
Take text "Contents:Resources:Spy.icns"
Add 2 and 3 together
Slight difference, but sometimes definitely noticeable.
I hope this works for you :)
Related
( I have been pushed to an obvious answer to my "Mystery" from a friendly member here.
I feel a little ashamed not to have found this solution myself, but will leave this posting online if there aren't too many irritated folks around. Maybe someone else can learn from this … apologies to every "know-it-alls"!)
I have recorded these actions with Automator:
– Cmd-tab to bring TextEdit to front (must have some lines typed)
– Pressed left arrow 7 times using shift down
– Stopped the recording
Next I selected and copied (Cmd-c) all action icons in Automator's "Record my actions" window.
I switched to Script-Editor and pasted (Cmd-v) them into a new window.
Then, I repeated above recording with 3 times UP arrow and copied icons into another new window.
I took only the two "set uiScript to …" lines and appended them in the first script.
THEY READ IDENTICAL:
set uiScript to "keystroke \"\t\" using command down"
my doWithTimeout(uiScript)
set uiScript to "keystroke \"\" using shift down" -- 7 times left-arrow
my doWithTimeout(uiScript)
set uiScript to "keystroke \"\" using shift down" -- 3 times up-arrow
my doWithTimeout(uiScript)
on doWithTimeout(uiScript)
set endDate to (current date)
repeat
try
run script "tell application \"System Events\"\n" & uiScript & "\nend tell"
exit repeat
end try
end repeat
end doWithTimeout
(To make resulting code more readable I omitted error code and "delays".)
Now, if I disable one of the "keystroke" lines (=> --my doWith…) the script somehow knows that it either has to do Shift-leftArrow 7 times OR Shift-upArrow 3 times.
I tried this after computer restart, even copied the code from this web page and pasted it into a new Script Editor window – it still knew what to do!
HOW CAN THAT BE ???
My only idea is: there must be some internal Applescript database that recognises content even if copied/pasted.
Does anybody know ?
Only if I re-write the code identically will there happen NOTHING – until I copy the first line of either recording ("set uiScript to …"). So the information must be linked to this first line somehow.
(BTW: first two lines that bring TextEdit –or, e.g. a Finder window– to the front work only from opened Script Editor; you have to bring TextEdit to the front yourself, if you start the saved-as-program script from Script-Editor's menu icon subfolder. Nevertheless the script won't work without them…)
It "knows" because the keystrokes are in the string - keystrokes using control type keys (such as arrow keys) just don’t have a text representation, so they wind up being invisible. Some text editors such as BBEdit can show these invisible characters, but they don’t show up in the Script Editor.
Apple has obviously made Automator's Watch Me Do action able to capture some of these control keys in a string, but for the rest of us it is more difficult, since the control keys will actually perform their function when pressed. If you need to use these kinds of keys, the key code command can be used, since it refers to the actual keyboard key, for example:
tell application "System Events"
repeat 3 times
key code 126 using shift down -- up arrow
end repeat
end tell
As the answer is quite simple but may still be interesting to some, I'll explain it shortly:
red_menace (in his comment above) pointed out that strings may contain invisible elements (like arrow keys), therefore I next checked the obvious:
If you "cursor-walk" along the "set uiScript …" strings the cursor will actually "pause" for 7 or 3 "steps" respectively on its way.
I hadn't thought/heard of any "invisible" string-chars (apart from obvious ones in Word etc.).
I wrote an applescript to convert a to b,
I want to show a dialog when script is working,
script first ask for a file and a folder from user, after this I want to show a dialog until my last dialog which say work is done.
I couldn’t find any help here or other sites regarding this way of implementing dialogs, thanks for you help.
to be clear, there is no way of having an input for steps, because it's doing a convert on one file only, but the file could be large & take some time, I'm looking for something that can input for example line of codes & progress depend on which line it's working right now or something else which start with the first line & close just before the end dialog
To display dialogs from the command line I just use
$ osascript File.scpt
However, the progress bar feature isn't constrained to a dialog window because it adapts to the current application, e.g. a Finder window, where the progress updates are shown on the bottom of the window. File.scpt would look something like this.
set numUpdates to 100
set progress total steps to numUpdates
set progress completed steps to 0
set progress description to "Updating..."
set progress additional description to "Preparing to process."
set cycle to 1
repeat with a from 1 to numUpdates
# update description, completed steps, etc
end repeat
When I run my script from a terminal window, however, the script runs but nothing is shown to indicate the progress. Is there a way to force the progress bar to open as a new dialog or something along those lines without having to export the script as a ".app" file?
The reason Script Editor can display progress in its window and Terminal cannot is because Script Editor has its own extended scripting definition with the extra functions so when the script is run via script editor it has been programmed with the extra progress indicator but no other applications are sorry. The way I see it, you pretty much have 2 ways I can think of that will let you display "Progress" in AppleScript:
This is kinda ugly but I used to just have a transparent spinner gif file that will be displayed in a dialog which will give the affect that something is loading or working. and a single button saying Nothing or OK eg.
display dialog "Loading..." buttons:{"OK"} with icon ("/path/to/loader.gif" as POSIX file)
And if you wanna make it temporary just add giving up after (duration in seconds)
This is probably the best option but it is probably more complicated. I advise that you transfer to a programming language called "AppleScript Objective C" otherwise known as "Cocoa AppleScript". This allows you to use the basic AppleScript commands with Cocoa Windows/Dialogs/etc including progress bars!. to start you off you should download Xcode and research AppleScript Objective C and perhaps stick to it. Its better than AppleScript but still has the same functions :)
Here is my script :
property MyLabel : missing value
on buttonClicked_(sender)
set the plistfile_path to "~/Desktop/MY_DATA.plist"
tell application "System Events"
set p_list to property list file (plistfile_path)
-- read the plist data
set theMyDataFromPlist to value of property list item "DATA1" of p_list
end tell
end buttonClicked_
This gonna take the data I want from a plist and set in a variable (theMyDataFromPlist).
How can I print this variable on the label "MyLabel" and make the script auto refresh when the data change ?
also, when I click on the text (or another button), can I copy the value to the clipboard. (would set the clipboard to theMyDataFromPlist work?)
I also wonder is that possible to do the same with Swift?
How can I print this variable on the label "MyLabel"
Where would you like to print the variable? You can make AppleScript display a dialog:
set variable to 42
display dialog "The value of variable is " & variable
AppleScript is not designed as a terminal language, it is for UI scripting, so it's not like most scripting languages that just offer a print as where would the user see the printed value.
and make the script auto refresh when the data change ?
Not quite sure what you expect here. That your system magically runs your script whenever the content of a file changes? That's not going to happen. You can create a launchd job and have launchd monitor that file and then execute your script when the file changes; this is described here:
https://discussions.apple.com/message/13182902#13182902
But some process will have to monitor the file and if your script should do so, it has to be running all the time, non-stop. Then you could make some code run once every X seconds, checking the file last modification date and whenever that changes, re-read the plist. This polling is super ugly but the best thing that AS can do out of the box.
BTW where is the rest? You say
also, when I click on the text (or another button),
can I copy the value to the clipboard.
Which text? Which button? Sound like you have a whole application there but all you showed us are 11 lines script code. You didn't even mention that you have a whole application with a UI. Your question starts with "Here is my script", so you make it sound like this 11 lines is all that you have.
(would set the clipboard to theMyDataFromPlist work?)
Why don't you simply try it out? Pasting that line into ScriptEditor would have taken equally long than asking this question. I just tried it and it turns out that you can only set strings.
This code won't work:
-- bad code
set variable to 42
set the clipboard to variable
But this code does work:
-- good code
set variable to 42
set the clipboard to "" & variable
I also wonder is that possible to do the same with Swift?
Personally I would not even consider writing an application in AppleScript; I'd rather stop writing code before I do that. Of course this can be done in Swift or in Obj-C. Everything you can do in AS can be done in these other two languages and no, the opposite doesn't hold true.
Using Obj-C or Swift, you can also use GCD and with GCD monitoring a file for changes is easy. Just see
https://stackoverflow.com/a/11447826/15809
I'm looking to write an Applescript which will utilize BBEdit — loop through a ton of HTML files and autoformat them (so the indentation is easier to read).
So far I have:
tell application "BBEdit"
activate
open {file "Macintosh HD:TEST DIRECTORY:testfile copy 2.html"} with LF translation
(format mode hierarchical)
beep
display alert "Finished!"
end tell
This applies the transformation to a single file, but has anyone got any suggestions how to apply this to an unknown number of HTML files?
You've almost got it; the trick is that you want to loop through the files returned by open. Thus, you need something like this:
tell application "BBEdit"
set docs to open LIST_OF_FILES with LF translation
repeat with doc in docs
-- format doc
save doc
end repeat
beep -- Or even `say "Finished!" without waiting until completion`
-- if you want your computer to talk to you
display alert "Finished!"
end tell
As you can see, all you need to do is place your formatting code inside this loop (and don't forget to save the files!); the loop will set doc to each element of the list docs in turn, and run the body with that element. If you're not sure how to select the files, one way is choose file with multiple selections allowed; this will pop up a dialog box which will allow you to select as many files as you want. To use it, just replace LIST_OF_FILES with (choose file with multiple selections allowed).
BBEdit will perform a find/replace on any group of files you want. Just hit command+shift+f to bring up Multi-File Search instead of the basic find/replace window.
If you have more than one set of find/replace commands that you need to execute at the same time, you need a Text Factory. See here for details on how to set one up: http://www.barebones.com/products/bbedit/benefitsexercise.html
Does that help?
You should use the Text Factory feature for this. Under "File > New > Text Factory". Any operation you can perform on a single file can be done on any number of files and you can save the operation for future use.