I'm trying to migrate a version of Redmine from backup to a new server; I'm migrating from Redmine 3.2.3 to 3.3.0. I installed the new version of Redmine (from Bitnami Stack) on my new server and everything loads properly. When I move my old database into the new version, I have to run
bundle exec rake db:migrate
to migrate my database. But... bundler can't find rake somehow even though gem list shows it clearly installed. Can I force bundler to use the version of rake that I have installed that it says I don't?
I should mention I've done no customization at all, haven't installed any gems, or changed ruby versions or done anything. This is out of the box Redmine.
I noticed after I made the question that I had two versions of rake installed. I removed both and reinstalled rake 11.1.2 and have the same problem.
You are probably using the wrong ruby binary. Note that, the installers for Bitnami Stacks are completely self-contained and run independently of the rest of the software or libraries installed on your system.
Also, taking a look at the screenshots you have shared, you were using ruby 1.9.3 when you have executed ruby -v and the Redmine Bitnami Stacks uses ruby 2.1.9. Probably this is the reason of the issue you are having.
If you want to use the ruby (and the other components) shipped with the Bitnami Stack you need to run the following command:
cd *INSTALLDIR*
./use_redmine
This command will open a new console session with the environment configured to use the stack.
There are two things:
ruby gems available via gem list
ruby gems availbale via bundler
When you are using bundle then bundler is looking for gem from Gemfile. You can have multiple gems installed in your system, but when you are using Gemfile then gem version will be taken from Gemfile.lock
Summing up:
$ bundle exec rake ...
require to have rake gem inside Gemfile
$ rake ...
it will take the newest version of rake gem installed in system
I hope it helps you.
This is how I finally got my Redmine upgraded:
A version of ruby outside of the one provided by Bitnami somehow got installed on this machine as well as another version of bundler. The first thing I did was uninstall the apt-get version of bundler. I had to manually remove /usr/bin/bundler and /usr/bin/bundle for $ which bundle to stop finding bundler even after the removal.
I saw that the Bitnami stack's ruby was version 2.1.x but found Ruby 1.9.3 was installed to /usr/bin/ruby1.9.3/ with $ which ruby. I took the commands from here and removed that version of Ruby.
Running $ ruby -v now gave me nothing as Ruby wasn't installed anymore (even though it was in the Bitnami stack). Bitnami's Ruby then had to be (re?)added to my path in ~/.profile. $ ruby -v now gives me the correct version.
$ gem list was no longer telling me that rake was installed. I tried running $ bundle install where Gemfile is but was complaining about mime-types being locked at a lower version and wouldn't do anything. I got around that with $ bundle update but then ran into the infamous nokogiri problem where it complains that everything required by nokogiri isn't installed.
Since I'd dealt with this before (many many times) I went over to the Nokogiri Website's install page and followed the instructions for troubleshooting on Ubuntu:
sudo apt-get install build-essential patch
sudo apt-get install ruby-dev zlib1g-dev liblzma-dev
and now $ bundle update worked on my Gemfile. Redmine upgraded and my users are about as happy as users can get.
I can't seem to uninstall an old version of sass
I've done
sudo gem uninstall sass
as well as
sudo gem uninstall sass --version 3.2.14
When I try to do
sudo gem update sass
It says there are no updates.
What's the best way from here to force usage of the latest gem?
I hadn't tried taking sudo out. That did the trick.
When I try to bundle install I get the following message:
Your Ruby version is 2.0.0, but your Gemfile specified 2.1.0
In my Gemfile I have the following:
ruby '2.1.0'
And when I run ruby -v in the console I get:
ruby 2.1.0p0 (2013-12-25 revision 44422) [x86_64-darwin12.0]
What does Ruby 2.1.0p0 mean? What version should I have in my Gemfile and why does the error tell me I have Ruby version 2.0.0?
Run
gem install bundler
or
gem update bundler
which may fix your problem.
For all new installed versions of Ruby you should update or install a new bundler.
In the top-level directory of your project, create a file named .ruby-version containing (wait for it...)
2.1.0
That apparently is the cross-{rbenv,rvm} way of spec'ing the version now.
For me, none of the answers helped. I fixed it closing and opening again the terminal.
If you get this in a Rails project, and you recently upgraded your Ruby version you might have spring still running with the old version of Ruby.
./bin/spring stop
will fix this.
None of the other suggestions was working for me. On the server, I had to do:
rvm --default use [correct version number]
brew cleanup ruby worked for me as I use HomeBrew to install Ruby.
I recently updated Ruby through HomeBrew but HomeBrew did not remove the older version. brew cleanup ruby will delete the older version of Ruby.
the main reason for this problem is your machine and gemfile using a different ruby version
so there is multiple problems and solutions for this issue you can try the below solutions one by one
1- make sure your machine install and use the same version of your gemfile if your machine not using the same one try to install this version using rvm
$ rvm install ruby_version_you_want
make sure the version installed success by using this command
$ rvm list
and if the new version doesn't set as a default you can set it using this command
$ rvm --default use ruby_version_you_want
you can check the current ruby version
$ rvm current
$ ruby -v
2- if you have the same issue check your bundler
$ gem install bundler
or
$ gem update bundler
3- in some cases spring still using the old version so you need to stop it
$ ./bin/spring stop
4- another case you can type
$ gem pristine --all
and try to install bundle again
5- also in some cases after install the updated ruby version you just need to restart your terminal.
6- another solution but I didn't recommend it the top-level directory of your project, create a file named .ruby-version containing your active running ruby version
7- if you still have this problem try to remove ruby and install the updated version only
$ aptitude purge ruby
If you are using Capistrano you should also check your deploy.rb file for the set :rbenv_ruby configuration.
I got this after upgrading with ruby-install. Fixed this with:
gem install bundler
followed by:
$HOME/.rubies/ruby-2.4.1/bin/bundle
It shouldn't be necessary to specify the path as which bundle indicates it's already using this path. But it gives the version error if running bundle without the path. I don't know why?
Thanks for the info about installing / updating bundler but it didn't work for me.
I had to do rbenv rehash
If you are using rbenv to manage your ruby environments you can run rbenv local 2.1.0 within your project directory to set the version of ruby your gemfile asks for.
NONE of the above answers worked for me, but
$ gem pristine --all
did the trick for me
buona fortuna
I struggled with something very similar, just different versions. I finally fixed it by going to RubyGems and placing the latest version of bundler in my gemfile, which currently is:
gem 'bundler', '~> 2.1', '>= 2.1.4'
There was still an issue, but after that, I ran:
gem update --system
And it resolved the mixed-up versions of Ruby in the rails project folder. You may have to restart the terminal before you do this. Also, I commented out the bundler gem file, it appears the gem update --system command is what really resolved it.
I got it from here:
For more advanced projects .versions.conf is supported, where more than the Ruby version can be specified.
Generating .versions.conf:
rvm --create --versions-conf use 1.9.3#my_app
Example .versions.conf:
ruby=jruby-1.6.8
ruby-gemset=my_app
env-JRUBY_OPTS=--1.9
Make sure your server configuration points to the correct ruby installation.
I had already updated my Ruby version in the .ruby-version file and that didn't fix it. ruby -v also showed the correct version, but I had forgotten to update my server config.
For example, with rbenv, NGINX, and Pushion Passenger I had in my NGINX server block:
passenger_ruby /Users/myusername/.rbenv/versions/2.3.1/bin/ruby;
And I needed to change to...
passenger_ruby /Users/myusername/.rbenv/versions/2.3.3/bin/ruby;
Then restarted NGINX and it worked.
This could happen when you install new version of ruby and update .ruby-version and Gemfile to the new version without doing install all the gems for new version of ruby first. So do the
$ bundle install
and you might as well need to source .profile or restart your shell.
If you are using rbenv just run
rbenv local 2.0.0
Then
bundle install
I opened Gemfile and replaced 2.7.1 with my own version of ruby 2.7.0 Everything is okay right now.
Had the same problem and I'm working with rbenv
Those are the steps that helped me fix my problem:
First in terminal, type which bundle. For me this gave: /usr/local/bin/bundle
Again in terminal try which ruby. In my case this gave: /Users/Mahmoud/.rbenv/shims/ruby
The problem here thus is that bundle isn't using the same ruby version from rbenv. So the path needs fixing. In other words I need to tell my terminal to use the rbenv version of bundle when I use bundle install.
So step 3: For me I personally already had the path set in ~/.bash_profile:
export PATH="$HOME/.rbenv/shims:$PATH"
eval "$(rbenv init -)"
but apparently this was not enough as I was using zsh. Had to add those same 2 lines to ~/.zshrc as well.
Restart terminal
Now bundle install is working as expected and which bundle gives:
/Users/Mahmoud/.rbenv/shims/bundle
indicating that the problem was just that bundle was using the wrong ruby.
So if you have this problem, just make sure ~/.bash_profile and ~/.zshrc have the correct path by adding the 2 lines indicated above. If this didnt work take a deep dive into paths to make sure that before starting which bundle gives the equivalent of:
/Users/Mahmoud/.rbenv/shims/bundle
Had the same error. Doing the following fixed it. I was using ruby 2.5.5 and rbenv. Upgraded from 2.5.1.
rbenv rehash
gem uninstall bundler
gem install bundler
gem install bundler:1.17.3 (my app needed specific bundler -v 1.17.3)
gem install rails
I solved this problem by updating my ruby version to ruby '2.4.0'
Then bundle install
Simply closing the terminal I was working on and opening a new one worked for me. Sometimes, updates are not effected immediately until a session is closed. I have found this as the case with many rails errors I faced.
I clean and install with that:
sudo gem pristine --all
and install again:
bundle install
I face the error msg
Your Ruby version is 2.5.1, but your Gemfile specified 2.3.0
and solved by the following steps:
open Gemfile which located at your directory.
change ruby '2.3.0' to ruby '2.5.1' and save the Gemfile
go back to items and run bundle update.
the issue is perfectly solved.
I have two versions of Compass, 0.12 and 0.13.alpha. The default version is 0.13.alpha but sometimes I need to switch to 0.12.
What command will permit this, please?
old topic, but I just came across the issue of having 2 projects. one using compass version 0.12 and the other 1.0.
as the newer version of compass relies on a new major release of sass, many deprecation warnings and compatibility issues are experienced when trying to run the newer compass on the old project.
well, now to the solution:
ruby gems already support having multiple versions installed. and after taking a look into the compass executable, it turns out there is a way to specify which compass version to use (the file is generated by rubygems, see http://pastebin.com/HeZnE0T5 if you are curious)
with that we can now have multiple versions of compass installed at once. eg:
gem install compass -pre // currently version 1.0.0.alpha.19
gem install compass // currently version 0.12.6
and now we can use them by specifying which version to use:
$ compass version
Compass 1.0.0.alpha.19
Copyright (c) 2008-2014 Chris Eppstein
Released under the MIT License.
Compass is charityware.
Please make a tax deductable donation for a worthy cause: http://umdf.org/compass
$ compass _0.12.6_ version
Compass 0.12.6 (Alnilam)
Copyright (c) 2008-2014 Chris Eppstein
Released under the MIT License.
Compass is charityware.
Please make a tax deductable donation for a worthy cause: http://umdf.org/compass
this obviously also works for other compass commands, eg watch:
$ compass _0.12.6_ watch .
>>> Compass is watching for changes. Press Ctrl-C to Stop.
EDIT: of course the version switch can be done in a Gemfile, but in my case its not a ruby project and compass is started via command line
If you are switching versions for different projects, I recommend using either RVM (Ruby) or virtualenv with some help (Python) or something similar to manage gems and versions. Bundler will help make either solution simpler to maintain.
If you are switching versions within a project, I recommend reconsidering your approach.
This is really simple using bundler.
Install bundler:
$ gem install bundler
Create the Gemfile in your project if you don't already have one:
$ bundle init
Specify the version you want/need in your Gemfile:
gem 'compass', '~>0.12.2'
gem 'sass', '3.2.8'
Install the specific gems and dependencies you have defined in your Gemfile:
$ bundle install
When executing a gem, you can now use bundler to control which version to execute based on your Gemfile:
$ bundle exec compass watch
That's it!
It's helpful to leave a comment in your Gemfile telling other developers how to use bundler:
# Now that you're using Bundler, you need to run `bundle exec compass watch` instead of simply `compass watch`.
Read more about versioning at http://bundler.io/v1.6/gemfile.html
Change the gemfile, add in a version parameter.
I just upgraded to OSX lion and my sass no longer works. I keep getting this error on the watch command
ents.rb:27: [BUG] Segmentation fault
ruby 1.8.7 (2010-01-10 patchlevel 249) [universal-darwin11.0]
I read online that if you uninstall the sass gem and reinstall it it will fix the problem. I'm just not sure how to do that. Can anyone please help.
Open Terminal, and type:
sudo gem uninstall sass
Then type:
sudo gem install sass
Also if you install compass, it will install sass by default:
sudo gem install compass
To check which version you have installed, type sass -v
If this still doesn't solve your problem then you may want to re-install Ruby / Xcode.
Try this
to uninstall:
gem uninstall -Iax sass
& then to re-install use:
gem install sass --pre
or
gem install sass
The general problem is that every new version of the OSX ships with a new Mac Ruby compiler. The best way to avoid those kind kinds of problems is to use RVM (Ruby Version Manager) to manage your Ruby versions and avoid conflicts and missing gems (not really missing, just located in an older Ruby version).
RVM helps you keep all your gems organised and easy switching to different versions of Ruby.
For example, I use 1.9.2 version of Ruby using RVM, all my gems are located in my 1.9.2 Ruby folder. Easier to keep track, and easy to switch to newer versions of Ruby if needed.