Hi there guys i have a server running a game I've created and it has three SH scripts that are required to run in separate terminals so what i wanna know is 2 things.
1:is there a way i can get a single script that i double click on and launch all three scripts to where i can see the shell (for Debugging)
2: Is there any way to have said scripts auto restart when they exit or crash? (for full automated access when the server is unattended by a dev)
Server Specs:
6gb ram 60gb SSD 6 core CPU
Ubuntu 14.04
with vnc for desktop control
Here's a SH script for you.
running=1
finish()
{
running=0
}
trap finish SIGINT
while (( running )); do
// Execute the command here that starts your server.
echo "Restarting server on crash.."
sleep 5
done
You can run this script for each server in it's own screen. That way you can see the console output of each one. For example:
screen -S YOURUNIQUENAME -m THESCRIPTABOVE.sh
In order to detach from the screen, hit CTRL + A then CTRL + D. You can get back to the screen by using screen -x YOURUNIQUENAME
For a nice guide on using the screen command, see this article: http://www.rackaid.com/blog/linux-screen-tutorial-and-how-to/ . It even has a video to show how it's used.
Related
I have a bash script that I have to regularly run on a remote server. Part of the script includes running a backup which takes a while, and after it has run, I have to hit "Y" to confirm that the backup worked before the script will continue.
I would like to know if there is a way to get my laptop to make a beep (or some sort of sound) when that happens. I know that echo -e '\a' makes a beep, but if I run it from within a script on the remote server, the beep happens on the remote server.
I have control of the script that is being run, so I could easily change it to do something special.
You could send the command through ssh back to your computer like:
ssh user#host "echo -e '\a'"
Just make sure you have ssh key authentication from your server to your computer so the command can run smoothly
In my case the offered solutions with echo didn't work. I'm using a macbook and connect to an ubuntu system. I keep the terminal open and I'd like to be informed when a long running bash script is ready.
What I did notice is that if I shutdown the remote system then it will beep the macbook and show an alarm icon on the relevant tab. So I have now implemented a bit of dirty workaround:
sudo shutdown 1440 && shutdown -c
This will initiate the system to shutdown and will immediately cancel the request. And I do get the alarm beep + icon. You will need to setup sudo to allow the user to permit shutdown. As it was my own remote server it was no problem but could limit the usability for others.
I have a game server running in an xterm window.
Once daily I'd like to send a warning message to any players followed after a delay by the stop command to the program inside the xterm window from a script running on a schedule. This causes the cleanup and save functions to run automatically.
Once the program shuts down I can bring it back up easily but I don't know how to send the warning and stop commands first.
Typed directly into xterm the commands are:
broadcast Reboot in 2 minutes
(followed by a 2 minute wait and then simply):
stop
no / or other characters required.
Any help?
Do you also need to type something from the xterm itself (from time to time) or do you want your server to be fully driven from external commands?
Is your program line-oriented? You may first try something like:
mkfifo /tmp/f
tail -f /tmp/f | myprogram
and then try to send commands to your program (from another xterm) with
echo "mycommand" > /tmp/f
You may also consider using netcat for turning your program to a server:
Turn simple C program into server using netcat
http://lifehacker.com/202271/roll-your-own-servers-with-netcat
http://nc110.sourceforge.net/
Then you could write a shell script for sending the required commands to your "server".
If you know a little about C programming; I remember having once hacked the script program (which was very easy to do: code is short) in order to launch another program but to read commands from a FIFO file (then again a shell script would be easy to write for driving your program).
Something you might try is running your program inside a screen session.
You can then send commands to the session from cron that will be just
as if you typed them.
In your xterm, before launching the program do:
screen -S myscreen bash
(or you can even replace bash by your program). Then from your cron
screen -S myscreen -X stuff 'broadcast Reboot in 2 minutes\n'
sleep 120
screen -S myscreen -X stuff 'stop\n'
will enter that text. You can exit the session using screen -S myscreen -X quit
or by typing ctrl-a \.
screen is intended to be transparent. To easily see you are inside screen, you can
configure a permanent status bar at the bottom of your xterm:
echo 'hardstatus alwayslastline' >~/.screenrc
Now when you run screen you should see a reverse video bottom line. Depending
on your OS it may be empty.
I'm opening an ssh-session to a remote server and execute a larger (around 1000 lines) bash-script on the remote machine. It involves several very CPU-intensive calls which run for up to three minutes each. To track the scripts progress it echoes messages placed at several points in the script.
In general the script runs smoothly. From time to time the script runs trough (the resulting file on the remote machine is correct) but the output to the terminal stops. Ctrl-C doesn't help, no prompt, just a frozen session. top in a separate session shows normal execution of the script.
My question: How keep the session alive?
local machine:
$ sw_vers
ProductName: Mac OS X
ProductVersion: 10.9
BuildVersion: 13A603
remote machine:
$ lsb_release -d
Description: Ubuntu 12.04.3 LTS
Personally, I would recommend using screen or tmux on the remote terminal for exactly this reason.
Those apps will allow the remote process to continue even if your local SSH session times out.
http://www.bangmoney.org/presentations/screen.html
http://tmux.sourceforge.net/
Start a screen on the remote machine and run your command from it:
screen -S largeScript
And then
./yourLargeScript.sh
Whenever your ssh session gets frozen, you can kill it with ~.
If you ssh again, you can grab back your screen by:
screen -dr largeScript
Make it log to a file instead (perhaps via syslog), and tail that file from wherever is convenient for you. This also helps detach the script so you can run it headless, from a cron job, etc. Also, if the log file has read access for others, they too can monitor it.
This hopefully should be an easy question to answer. I am attempting to have mumble-ruby run automatically I have everything up and running except after running this simple script it runs but ends. In short:
Running this from terminal I get "Press enter to terminate script" and it works.
Running this via a cronjob runs the script but ends it and runs cli.disconnect (I assume).
I want the below script to run automatically via a cronjob at a specified time and not end until the server shuts down.
#!/usr/bin/env ruby
require 'mumble-ruby'
cli = Mumble::Client.new('IP Address', Port, 'MusicBot', 'Password')
cli.connect
sleep(1)
cli.join_channel(5)
stream = cli.stream_raw_audio('/tmp/mumble.fifo')
stream.volume = 2.7
print 'Press enter to terminate script';
gets
cli.disconnect
Assuming you are on a Unix/Linux system, you can run it in a screen session. (This is a Unix command, not a scripting function.)
If you don't know what screen is, it's basically a "detachable" terminal session. You can open a screen session, run this script, and then detach from that screen session. That detached session will stay alive even after you log off, leaving your script running. (You can re-attach to that screen session later if you want to shut it down manually.)
screen is pretty neat, and every developer on Unix/Linux should be aware of it.
How to do this without reading any docs:
open a terminal session on the server that will run the script
run screen - you will now be in a new shell prompt in a new screen session
run your script
type ctrl-a then d (without ctrl; the "d" is for "detach") to detach from the screen (but still leave it running)
Now you're back in your first shell. Your script is still alive in your screen session. You can disconnect and the screen session will keep on trucking.
Do you want to get back into that screen and shut the app down manually? Easy! Run screen -r (for "reattach"). To kill the screen session, just reattach and exit the shell.
You can have multiple screen sessions running concurrently, too. (If there is more than one screen running, you'll need to provide an argument to screen -r.)
Check out some screen docs!
Here's a screen howto. Search "gnu screen howto" for many more.
Lots of ways to skin this cat... :)
My thought was to take your script (call it foo) and remove the last 3 lines. In your /etc/rc.d/rc.local file (NOTE: this applies to Ubuntu and Fedora, not sure what you're running - but it has something similar) you'd add nohup /path_to_foo/foo 2>&1 > /dev/null& to the end of the file so that it runs in the background. You can also run that command right at a terminal if you just want to run it and have it running. You have to make sure that foo is made executable with chmod +x /path_to_foo/foo.
Use an infinite loop. Try:
while running do
sleep(3600)
end
You can use exit to terminate when you need to. This will run the loop once an hour so it doesnt eat up processing time. An infinite loop before your disconnect method will prevent it from being called until the server shuts down.
I have written a perl script which runs in the background right after a user logs in on a window xp machine. Now the script runs fine until the user is working on the computer. But if he locks the computer or the screen saver is started (which also locks the pc soon) then the script stops working. So how can I get the script running even if the Pc is in locked mode ???
Locking a computer will not stop a regular perl script, you have to go out of your way to create a script to notice when a computer is locked and stop running
Try it, run this
perl -le " for( 1 .. 20 ) { print scalar gmtime; sleep 1; } "
lock the computer, wait a few seconds, unlock it, and you'll see it kept running
Just a thought... you might have to run the perl script as a windows service to keep it running (kind of emulating Unix's nohup).