How might I be able to download git (console or UI, I don't care which) without using the installer (direct download) on mac. Maybe there is a possibility of having an app on the desktop that I can launch?
You can do it with Homebrew :
brew install git
Or compiling from source (as described at git-scm.com) :
// get tar via curl, wget.. then :
tar -zxf git-1.7.2.2.tar.gz
cd git-1.7.2.2
make prefix=/usr/local all
sudo make prefix=/usr/local install
Can also try MacPorts:
port install git
I just realized that git was already installed on my mac, but the previous two answers were good as well.
Related
I just updated XCode and the command line tools to 11.4. Now when I run svn it says "svn: error: The subversion command line tools are no longer provided by Xcode". The release notes say "Command line tool support for Subversion ā including svn, git-svn, and related commands is no longer provided by Xcode. If you need Subversion or related command line tools the you need to install the Command Line Tools package by running xcode-select --install." I seem to be in a loop here, as the tools are installed. Has anyone experienced this problem and resolved it?
macOS Catalina
I had the same issue after upgrading to Catalina 10.15. It's clearly mentioned in the Apple website that SVN is deprecated in Xcode 11:
You can find it here: https://developer.apple.com/documentation/macos_release_notes/macos_catalina_10_15_release_notes
Command line tool support for Subversion ā including svn, git-svn, and related commands ā is no longer provided by Xcode.
The solution is to install the standalone Command Line Tools package instead:
sudo rm -rf /Library/Developer/CommandLineTools
followed by:
sudo xcode-select --install
This will replace the bundled Command Line Tools with the standalone package.
If it doesn't work for you then try to install it with brew.
brew install svn
brew is a package manager for MacOS so if you don't have it installed then you can simply install it: https://brew.sh/
macOS Big Sur
I faced the same issue Today (16th November 2020) after upgrading to MacOS Big Sur. I was able to fix it by installing the SVN again using brew install svn command.
If you faced permission errors after running above command, you can fix it by running following command.
sudo chown -R $(whoami) /usr/local/*
brew install svn
in Xcode 11.4. Svn has been removed.
I had same issue from Netbeans and have done the following from command line and now all fine
sudo xcode-select --install
/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install.sh)"
brew install svn
Coming from a FreeBSD background we elected to install SVN via MacPorts which is akin to FreeBSD Ports. So basically one would first need to install MacPorts and then install SVN as follows:
sudo port install subversion
Some details -
Install MacPorts: https://www.macports.org/install.php
Install SVN: https://trac.macports.org/wiki/howto/Subversion
It took less than five(5) minutes and works well for us.
I switched to SVNKIT which works very well for my purposes. Since I'm doing a lot of Java development is no drawback for me that SVNKIT is based on Java.
The big advantage is that SVNKIT will still work even if Apple throws SVN out completely.
I found svn still available on my Mac (upgraded from 10.15.x -> Big Sur, including XCode upgrade) in
/Library/Developer/CommandLineTools/usr/bin/svn
In the Apple Developers forum I read the suggestion to make an alias, which worked for me. However, considering svn is being dropped by Apple, this will probably not work on new installs, but it could be useful for those of us that just want it to work for now after upgrading.
alias svn=/Library/Developer/CommandLineTools/usr/bin/svn
Note: I found it easier to just make a symbolic link to svn:
ln -s /Library/Developer/CommandLineTools/usr/bin/svn /usr/local/bin/svn
my mac os version is macOs Catalina 10.15.5,I try
sudo rm -rf /Library/Developer/CommandLineTools
sudo xcode-select --install
brew install svn
but it not work.so I try to install with source code.It's work!
tar xvf subversion-1.14.0.tar.gz
cd subversion-1.14.0
./configure --with-apr=/usr/local/opt/apr --with-apr-util=/usr/local/opt/apr-util
make
now,you can find it in /usr/local/bin/
Based partly on the other answers here, I built from source with this procedure:
Download & unpack svn source tarball (NOT zip file!) from
https://subversion.apache.org/download.cgi
cd subversion-1.14.0
./get-deps (this seems to have downloaded apr and apr-util but not
built them)
cd apr
sudo mkdir /usr/local/opt
(because I did not already have such a directory on a fresh Mac)
./configure --prefix=/usr/local/opt/apr
make
make test
(saw lots of "OK" and "SUCCESS", plus one failure in "testsock")
sudo make install
cd ../apr-util
./configure --prefix=/usr/local/opt/apr-util --with-apr=/usr/local/opt/apr
cd ..
make
./configure --with-apr=/usr/local/opt/apr --with-apr-util=/usr/local/opt/apr-util --with-lz4=internal --with-utf8proc=internal
make
sudo make install
The top instructions (removing the command line tools, xcode-select --install, and brew install svn) worked for me (Monterey, 12.5.1, on an M1 pro). Thanks!
However, after I did the brew install, I had to manually remove the old svn version from /opt/local/bin before the new version would run. (discovered with $ which svn). Might be the result of migrating from the old laptop to the new one.
On 31st of March Homebrew moved some of their formulas around. For this reason I can't find a way to make my PHP 7 work with the following extensions:
mailparse
imap
I have tried many examples found on the internet, such as
brew install php70 --with-imap
brew install -s php70 --with-imap
brew install php70-imap
not mentinoning the brew update, brew upgrade, brew tap etc...
But none of them seems to work as brew php does not work with options anymore.
I had even less options trying to install without homebrew, as I am using nginx in my computer, not apache.
Does any one had this problem and was able to fix it?
Thanks!
After some troubleshooting, it finally worked..... That's how I did:
First I installed the following formulas:
brew install imap-uw
brew install openssl
After that, I downloaded the same version of the pho is running in my computer on http://php.net/downloads.php (saved it in Downloads folder).
In terminal I did.
cd ~/Downloads/php-7.0.29/ext/imap
./configure --with-imap=/usr/local/Cellar/imap-uw/2007f --with-kerberos --with-imap-ssl=/usr/local/opt/openssl
make
where /usr/local/Cellar/ is the path where the formula imap-uw is installed.
P.S this configure file does not accept --with-openssl or --with-openssl-dir or +openssl. I waist a lot of time trying that.
it created a folder modules/ with the imap.so file inside.
Then I created a folder and moved the imap file to inside it
mkdir /usr/local/opt/php70-imap
mv modules/imap.so /usr/local/opt/php70-imap/imap.so
After that just add the extension to the php.ini file
extension="/usr/local/opt/php70-imap/imap.so"
Restart the server and imap will work fine!
For mailparse I had to use pecl.
First I followed this tutorial https://jason.pureconcepts.net/2012/10/install-pear-pecl-mac-os-x/
After pecl was installed properly in my computer, I ran the following code:
cd
pecl download mailparse
tar -xvf mailparse-3.0.2.tgz
cd mailparse-3.0.2/
phpize
./configure
sed -i 's/#if\s!HAVE_MBSTRING/#ifndef MBFL_MBFILTER_H/' ./mailparse.c
make
mkdir /usr/local/opt/php70-mailparse
sudo mv modules/mailparse.so /usr/local/opt/php70-mailparse/mailparse.so
I got the piece of code above here https://github.com/php-mime-mail-parser/php-mime-mail-parser . However the line sed -i 's/#if\s!HAVE_MBSTRING/#ifndef MBFL_MBFILTER_H/' ./mailparse.c has not worked properly. I ran make anyways and it worked.
After that just add the extension to the php.ini file
extension="/usr/local/opt/php70-mailparse/mailparse.so"
I am running SVN 1.8.9 on Mac OSX 10.8.5. Currently the command "svn log" fails in a given repo with the error message:
svn: E170000: Unrecognized URL scheme for 'https://...'
My research showed that this is due to SVN having been compiled from source without the flag "--with-serf".
So, I downloaded and built serf (with its dependencies APU and APR) using the scons build tool as per the instructions. All went fine, but after installation, there is no serf binary command available. When I type 'serf' in the shell, I get the command not found error. Searching for a serf binary on my machine also doesn't give any results.
What might have gone wrong during the intallation?
Where should binary be and why isn't there?
Are there any workarounds to install SVN with serf?
(I tried 'brew install --build-from-source svn', but this doesn't seem to include the serf dependency either)
Thanks a lot in advance.
Cheers,
Martin
Here is what I did:
Download latest SVN
Download the latest SCONS.
cd ~/Downloads/
tar -zxvf "latest SCONS".tar.gz
tar -zxvf "latest SVN".tar.gz
cd "latest SCONS"
python setup.py install
cd ~/Downloads/"latest SVN"
sh get-deps.sh serf
cd serf
scons install
cd ..
./configure --with-serf
make install
I got the same error here and solved by following this post:
https://ahmadawais.com/installing-svn-subversion-on-yosemite-after-removing-the-old-version/
I had to remove some old references to subversion inside:
/usr/local/include/subversion-1/
/usr/local/include/serf-1/
Building Subversion is a pain due to the dozens of dependency issues. Usually Apache httpd has to be rebuilt with Subversion too, and then there's the APR library.
The easiest solution is to download a package that has everything you need. CollabNet doesn't have a Macintosh server package, but Wandisco does. (Look for Yosemite down the Macintosh list). This will include Apache, Subversion, and the Subversion client all in one package.
I haven't used Wandisco's package before. However, I can tell you that CollabNet installs everything under /opt/collabnet including a new and complete Apache server. This also sets up /etc/init.d to start this Apache server and disables the original. I assume a similar thing happens with Wandisco (although Mac OS X doesn't use /etc/init.d, but Launch Services).
This is probably way easier than attempting to configure your Mac with everything you need for Subversion.
I did svn --version on command line and it says it is 1.17.10.
I want to uninstall it completely, so I can re-install 1.16.12
How do I do that in OS X?
Thanks
As said Mike Christensen, in order to uninstall it, you just need to delete the binary. Run which svn to know where your binary is installed.
In order to install subversion, you need to:
Download it.
Uncompress it (tar xzf subversion-1.x.y.tar.gz).
Compile it (./configure && make).
Install it (sudo make install).
Iām pretty sure this will install it in /usr/local/bin. So if you want svn to call the subversion you just installed (instead of the one built in XCode), you need to edit your $PATH so that /usr/local/bin is before /usr/bin. On Mac OS X, editing the path is done by editing the file /etc/paths.
Note that steps 3 and 4 requires a compiler and make. The easiest way to get those on Mac OS X is to install XCode.
If you get any error in following Etienne Miret solution so the following
after setp 3
brew install apr
brew install apr-util
/configure --with-apr=/usr/local/Cellar/apr/1.5.2_3/ --with-apr-util=/usr/local/Cellar/apr-util/1.5.4_4 && make
sudo make install
After completion, you can see the new SVN installed here
/usr/local/bin/svn --version
After I got MacPorts installed and did a 'sudo port -v selfupdate', I try to install meld.
The installation just starts to Fetching all kinds of stuff
gnome-comoon
perl5.8
perl5
pkgconfig
.....
this goes on and on.
Is that normal?
You may want to install it via HomeBrew (already mentioned before):
brew install homebrew/gui/meld
Though you may face stability issues (as I did). So I'd rather recommend to use "Meld for OSX":
Go to https://yousseb.github.io/meld/
Download DMG file you prefer (e.g. "Download latest DMG" https://github.com/yousseb/meld/releases/download/osx-6/meldmerge.dmg)
Install it to your Applications folder
We are basically done, but it is not accessible via command line.
Solution:
Write a small wrapper to run from Terminal:
echo -e '#!/bin/sh
params="$#"
open -W -a Meld --args $params' | sudo tee /usr/local/bin/meld
sudo chmod +x /usr/local/bin/meld
Try (you must use absolute paths though):
meld /home/a.txt /home/b.txt
Or just run Meld from menu.
meld is now available in homebrew. The formula can be found here.
See this answer by cmedeiros on SuperUser for more information on installing and getting it to work. This is much easier than using MacPorts.
Current command with updated formula to install meld with homebrew is:
brew install caskroom/cask/meld
Yes, it is normal to pull in dependencies but it shouldn't take too long. For comparison, installing Meld with Homebrew took about 15 minutes for me.
For reference, my installation of Meld on OS X Mavericks:
Install Xcode from the app store
Install XQuartz from package (Meld will complain if you don't have it)
command line: 'brew install meld'
If you are prompted to install the Xcode command line tools at some point, do so.
Hope this helps.
Unfortunately, the is very normal with MacPorts, and is the reason that people many have switched to homebrew http://github.com/mxcl/homebrew
However, I found this post because homebrew doesn't include Meld. Sigh.
Consider downloading macOS meld version dmg https://github.com/yousseb/meld/releases/
Brew now works brew install --cask meld.
See https://formulae.brew.sh/cask/meld#default
UPDATE Jul-23-2020
Just do :
brew install homebrew/gui/meld
using the updated brew link: brew install caskroom/cask/meld
even after this its not working when I install backup and restore tool by google. I guess its messing up with the python version.