I am attempting to install ruby 1.9 using pik.
Here is the error
pik install ruby 1.9 -d
There was an error. Error: private method `gsub' called for
nil:NilClass
in: pik/commands/install_command.rb:24:in `execute' in:
pik_runner:33
The error seems similar to pik Error: private method `gsub' called for nil:NilClass and Error: private method `gsub' called for nil:NilClass with pik install ruby 1.9.3, but I installed jRuby with no problem.
I have seen what seems to be the same error referenced on the pik github page , but it is not solved.
I have also seen a SO answer that said that this is an issue with pik that will not be solved, if this is the case, what is the best way to add the second version of ruby?
So, one of the better answers, is to do so in an environment other than windows. Installing virtualbox and/or vagrant and using ruby from a linux environment is much more often the preferred solution to this.
Alternate to this, basically all you need to do to install another version of ruby is install it to another directory, and when you want to use that version of ruby in windows, alter your path statement so that version of ruby is the one in your path rather than the previously installed version.
When I've had to do this, begrudginly, in windows, I've used a single path in my windows environment, but, instead used NTFS junctions to put the correct folder in the correct location to match the path, and then crafted a batch file to remove and add the correct junction for the specific version of ruby that I wanted running.
Hope this helps.
Related
I'm trying to get ruby3 on ubuntu20.04 (which I must use for policy compliance reasons) and only includes ruby up to 2.7
this version of ubuntu provides rbenv, and the list of available interpreters have rbx-3.0. When i try to install it i get
bundler-1.3.6/lib/bundler/fetcher.rb:240:in dependency_api_uri': undefined method encode' for URI:Module (NoMethodError)
not sure if the versions are related, but since the error i am getting (undefined method encode' for URI:Module`) is often caused by ruby 2 code running ruby 3, i'm guessing this is the source of my predicament.
Is there a work around for this? or a smarter way to go about getting ruby3 on this OS?
I would like to run gem commands, such as gem install, with a different ruby version than what is listed in gem env. The Ruby version I want to use is a pre-compiled version which I have the path for, so installing and using another version from RVM or similar would not solve my problem.
I do not want to change the RUBY EXECUTABLE permanently, just for one command at a time. I have tried to set GEM_HOME, GEM_PATH, PATH, RUBY and more. I have tried firing up gem with specific/version/of/ruby/path/ruby path/to/gem env, but I still get the default Ruby in my RUBY EXECUTABLE variable.
I even tried settingRUBY_EXECUTABLE=/path/to/correct/ruby, which also did not work.
What really surprised me was that when I edited the shebang in the path/to/gem file itself so it pointed to the correct Ruby, it still did not work! What is up with that?!
How can I change this variable so I can use gem goodness with my custom compiled Ruby?
This one is really beating me. I have now updated my rbconfig.rb to point to the desired Ruby path. I have looked at the rubygems source and replaced every single instance of the default ruby , in all the files I could find, with the path to the one I want. Even this did not set the environment correctly. Is this somehow hard-coded into the compiled ruby? If that is the case, why the star*4 is this done?
Try using rbenv (https://github.com/sstephenson/rbenv) or RVM to manage Ruby versions (https://rvm.io/). When you switch Ruby versions with rbenv, gem env will use use the new Ruby version. The following command can be used to change the Ruby version for a single shell:
$ rbenv shell 2.1.2
After hours and hours of research, stepping through the Ruby source with Pry, reading source code and more I figured out that this is not possible to do because it is hard-coded into ruby at compile time (wtf?). Anyway, the way to solve this is to simply recompile Ruby. Yeah.
There is also apparently a compile flag which you can set which removes this hard-coded environment: --enable-load-relative
After struggling with this for way to long I finally got this project working, where I have made an easy to use portable version of Ruby. Simply put, a folder with Ruby on it which you can move about, put on a USB stick or whatever, and it still works :)
Of all the days I chose today to switch from rvm to rbenv. All went well far enough, there are good tutorials on this, but the fun stopped when I tried to install ruby 1.9.3.
rbenv install 1.9.3
proposed to install 1.9.3-p448 as the current version which seems ok to me, so I tried
rbenv install 1.9.3-p448
and went down from there on. It will look up something on ...cloudfront.net and then tried to fetch ruby-1.9.3-p448.tar.gz from the "usual location" which it considers to be
http://ftp.ruby-lang.org/pub/ruby/1.9/ruby-1.9.3-p448.tar.gz
which fails with
/usr/local/bin/ruby-build: line 144: pushd: ruby-1.9.3-p448: No such file or directory
plus a final 404-error and a host of followup error messages.
As it turns out the link above is identical to the one published on http://www.ruby-lang.org/en/downloads/ which I would consider as "official" a link as you might find for Ruby. So if you go to ruby-lang.org manually (or using the link above) you will also find a broken download (as of 2013-08-06 17:06)!
I guess this is a temporary issue and the downloads will return (2.0.0 link is also broken by the way). Not to much of a problem for me at the moment as 1.9.2 can still be installed (and I am stuck with that at my current hosting provider ...), but anyways: Are there any other options I would have to install a ruby with rbenv without these "official" distributions?
Looks like ruby-lang.org has been going on and off line for a couple of hours now.
ruby-lang status: http://www.ruby-lang.org/en/news/2013/08/06/status-issue/
GitHub Issue: https://github.com/ruby/www.ruby-lang.org/issues/259
just tested overriding the mirror for ruby-build in cap...
rbenv uses ruby-build. You can override the mirror in ruby-build url in 2 ways:
Specifying a custom ruby version (requires you to write out a config in ruby-build/share/ruby-build/my-custom-ruby
Overriding the mirror url (requires the checksum to be the same), i.e., RUBY_BUILD_MIRROR_URL= http://mirrors.ibiblio.org/ruby/2.0/ruby-2.0.0-p247.tar.gz
env RUBY_BUILD_MIRROR_URL=http://mirrors.ibiblio.org/ruby/2.0/ruby-2.0.0-p247.tar.gz ~/.rbenv/bin/rbenv install 2.0.0-p247
I had this same problem, and I was able to work around it by editing the ruby-build recipe for the particular version of Ruby I needed to download.
I installed ruby-build as an rbenv plugin, so the recipe lives here:
~/.rbenv/plugins/ruby-build/share/ruby-build
Here's the edited version of the recipe:
install_package "yaml-0.1.4" "http://pyyaml.org/download/libyaml/yaml-0.1.4.tar.gz#36c852831d02cf90508c29852361d01b"
install_package "ruby-1.9.3-p448" "http://mirrors.ibiblio.org/ruby/1.9/ruby-1.9.3-p448.tar.gz#a893cff26bcf351b8975ebf2a63b1023"
#install_package "ruby-1.9.3-p448" "ftp://ftp.ruby-lang.org/pub/ruby/1.9/ruby-1.9.3-p448.tar.gz#a893cff26bcf351b8975ebf2a63b1023"
I did not try this, but you might be able to achieve a similar result by following the instructions for specifying package download mirrors.
I have two related questions that I was hoping someone could help out with.
I recently installed Ruby 1.9.2 on my Mac (running Snow Leopard 10.6.4) and I haven’t been able to figure out how to get Terminal to use the new Ruby as a default, rather than the factory-installed Ruby 1.8.7. The old Ruby 1.8.7 is located in my ~/usr/bin/ruby directory while the new Ruby 1.9.2 is in ~/usr/local/bin/ruby. Someone said that I need to put the new version of Ruby's directory in the PATH prior to the old version's directory so that the system looks there first - is this correct? If so, can anyone provide step by step instructions on how to do this?
I’ve created a new directory but can’t seem to figure out the correct way to add that directory to my PATH using the Terminal bash shell. I tried using the instructions that I found here (http://www.macgasm.net/2008/04/10/ad...thin-terminal/) twice but they didn't work for me. The directory containing my program ("Ruby_Programs") shows up in the PATH but when I try to run "ruby newprogram.rb" from the command line it results in ":ruby: No such file or directory -- newprogram.rb (LoadError)". The file definitely exists and is a functional Ruby program. I did change the name of the directory to "Ruby Programs" and then back to "Ruby_Programs" - could that have somehow caused this problem?
Any help would be greatly appreciated. Here is my current PATH:
$ echo $PATH
/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/Users/sbrriffe/src:/usr/X11/bin:/Users/sbriffe/Ruby_Programs/:
You might want to check out rvm. You can install multiple versions of ruby side by side and easily switch between them. If you follow the rvm installation notes you won't have any more path problems.
Your Ruby Programs directory shouldn't be in your path: the location of your ruby interpreter should be. Then, you cd to the location of your ruby program, and run it from there: ruby program.rb.
Since you are on a Mac, check out homebrew for something that will make installing software easier. I have my homebrew set up in /usr/local, and it works great.
Once you have installed stuff where you need it, then you'll want to adjust your $PATH. The items in $PATH are searched in the order they appear, so in your ~/.bashrc, you'll want to add:
export PATH=/usr/local/bin:$PATH
To make sure /usr/local/bin gets searched before /usr/bin.
I would use RVM to get everything installed, and then once you have RVM installed it is easy to set your default Ruby version.
Check out https://rvm.io/ -- once you have that installed you can change your default by using : $ rvm use 1.9.2 --default
hope that helps- you can do this with any version, not only 1.9.2
I am trying to set up Ruby on Rails on windows. I am using the Flash Rails distribution that looks pretty good, but there is an issue with sqlite3. I found the threads telling me to install version 1.2.3, which installed fine. I'm using ruby 1.9.0, and every time I try and run a script (e.g. rake db:create) that uses the database I get an error message "no driver for sqlite3 found".
This apparently is a missing sqlite3.dll, but I have the dll in my %PATH%, and I have also tried copying it into the directory where I am running the script from, the directory where the sqlite3 ruby code lives.
Does anyone have any ideas? If possible I want all teh ruby stuff to be self contained so I can use it from a pen drive.
EDIT: To clarify, I already used gem install to install the ruby-sqlite3 gem - it is just non functional as it cannot find the sqlite3.dll (even though it is actually present in a directory on my %PATH%)
EDIT PART 2: After doing some more digging, the problem appears that ruby will not load the sqlite3_api.dll. I have copied it all over my filesystem, I just get a failure to read file. Other dll libraries in the same directory (e.g. zlib.dll) work fine!
I tried installing the dlls into system32, and that did not work either.
The problem put simply is that sqlite3-ruby 1.2.3 is not compatible with ruby 1.9. This is caused because ruby 1.9 does not use .dll files for c libraries it uses .so files instead. Additionally, since sqlite3_api.dll is written against msvcrt-ruby18.dll. This means that it specifically only will support ruby 1.8.*.
The good news is that there is a fat binary version that will support both ruby 1.8 and ruby 1.9. Uninstalling all former versions of sqlite3-ruby and then installing this one. (You may have to manually delete some versions the gem after uninstalling.) in order to install it use
install sqlite3-ruby --source http://gems.rubyinstaller.org
for more information see this website
Try installing the sqlite3-ruby gem:
gem install sqlite3-ruby
Something similar happened to me recently so I thought I'd update my answer.
For reference there's a sqlite3_api.dll file located in the gem's lib directory. Also the sqlite3.dll file needs to be reachable on the path. They are different files, the first is required by the gem to interface Ruby to C code, while the second contains the actual Sqlite implementation.
It's best to get the second file from the sqlite website and extract it to the Ruby\bin directory (as you shouldn't manually put DLL's into the windows or windows\system directories any more).
So for reference "sqlite3_api.dll" needs to be in:
Ruby\lib\ruby\gems\1.8\gems\sqlite3-ruby-1.2.3-x86-mswin32\lib
and "sqlite3.dll" needs to be on the path, possibly in:
Ruby\bin
As for the "driver not found" problem I would suggest trying the easy things first and making sure gems is installed correctly, up to date, and that the RUBYLIB and PATH environment variables are set appropriately. (System restart may be required to propagate the changes fully.)
Re this link
Download sqlitedll-3_6_10.zip and extract into ruby/bin!
Try going to sqlite.org download page and get the zipped up dll. Then put that in your c:\windows\system32 folder, that should allow Ruby to find it.
Restart your machine after running install sqlite3-ruby
To clarify, which gem are you using? sqlite-ruby or sqlite3-ruby?
They're part of the same project, but different releases. The key is that sqlite3 appears to have driver code included.
I assume you're attempting to use the first, since it's giving me the same error. If so, try switching.
Also.. How literal do you mean by this?
but I have the dll in my %PATH%
PATH=...;C:\sqlite\sqlite3.dll
PATH=...;C:\sqlite
The first will attempt to find C:\sqlite\sqlite3.dll\sqlite3.dll, AFAIK.
I use Ruby 1.8.7 (works with 1.9.1 too)
OS is WindowsXP SP3
Go to
http://www.sqlite.org/download.html
and Download file
sqlitedll-3_7_0_1.zip (265.19 KiB)
and unzip then we will get
sqlite3.dll
Copy sqlite3.dll to your bin folder
as C:\Ruby191\bin or C:\Ruby187\bin
then it works