I'm having an oddity with Visual Basic 6. In a number of activities, I use the following code to position a save commandbutton at the bottom right of the activity:
ButtonTop = UserControl.Height - cmdSave.Height - 90
ButtonLeft = cmdSave.Width + 90
Call cmdSave.Move(UserControl.Width - ButtonLeft, ButtonTop)
This works perfectly except in one activity, where only the top half of the button is visible; the rest extends off the bottom of the screen. Any ideas on what could cause that?
It could be worth checking that the bottom/height of the user control on the form is where you expect it to be, if that drops below the bottom of the form then that could throw it out.
If that doesn't cure it have a look at the scale mode for the form, and the control and see if it's the same as the other controls/forms.
Hope that helps.
Related
I'm trying to create a program that creates three buttons on the right side of the screen.
When I press a button, the entire background will change color (each button will make the background a different color). Whenever the mouse is not pressed, the background will return to white. I'm having trouble understanding how to make the three rectangles into buttons.
THIS MUST BE DONE WITHOUT A SPECIAL BUTTON METHOD/LIBRARY
You need to break your problem down into smaller pieces.
Can you create a program that just shows a single button? Don't even worry about making it interactive yet. Just show a single button at hard-coded coordinates.
Now can you detect when the user clicks in that button? Just print something to the console. Get that working perfectly before moving on.
Now can you get multiple buttons working together? Again, just print somethign to the console, and make sure it works perfectly before moving on.
Finally, can you make it so pressing each button changes the background instead of printing something to the console?
If you get stuck on a specific step, you can post a MCVE along with a specific technical question. Stack Overflow really isn't designed for general "how do I do this" type questions. It's for specific "I tried X, expected Y, but got Z instead" type questions. So please try something and post an MCVE of a specific step you're stuck on. Good luck.
Check processing's documentation for mouseClicked() and mousePressed.
The former being a method called upon a click, and the later is a boolean that is constantly updated. (So you'd check for it in your draw())
You'd then want to check the mouseX and mouseY values to see if they are in your desired button's area. (Which would be displayed on screen using rect())
I have 2 forms I will call formA and formB.
formA contains a button that opens formB and I called formA.setTransitionOutAnimator(CommonTransitions.createCover(CommonTransitions.SLIDE_VERTICAL, false, 300)); before showing formB. formB slides over formA from the bottom as expected.
On formB, I have an X button and I want it to reverse the above transition by sliding back formB to reveal formA. In this case, I called formB.setTransitionOutAnimator(CommonTransitions.createUncover(CommonTransitions.SLIDE_VERTICAL, false, 300)); which gave me wrong undesirable transition.
It performs almost the same operation as createCover() except that the screen flickers.
Is this how Uncover suppose to work? or is there another way of achieving my illustration above?
There seems to be a bug here. It should be fixed with the next update. Thanks.
Uncover should indeed be the exact opposite of cover and it looks to me that your usage is correct.
I am using a ZedGraphControl in a WindowsForms project in C#. The ZedGraphControl is V5.1.5.
The data in the control is static and I add it all before the form is shown. The X axis of the data consists of numbers indicating seconds offset from the beginning. in other words from 0 to some number of seconds.
I want to initially show the last 5 seconds, but provide a horizontal scrollbar so the user can scroll back and forth. I set the "graphPane.XAxis.Scale.Max = maxX;" where maxX is the largest X value in my data. I set the "graphPane.XAxis.Scale.Min = maxX - 5;".
The data starts off displaying the way I want it, but when the user scrolls the horizontal bar, bizzar behavior occurs.
As you drag the thumb of the scrollbar to the left, the beginning of the data shown in the grid moves to the lower values as expected, and the thumb of the scrollbar moves to the left, but the right edge of the thumb stays at the right of the scrollbar and you cannot move back to the right. It is as if the data to the right of the viewing range gets truncated as you scroll left.
I cannot find any reason for this nor any way to control it. Does anyone have any ideas about this behavior?
Ok, found it myself.
I found a fine article that describes scrolling:
Add a ScrollBar
In it the author specifically says "the scrolling will be wacky because the scrollable range has not been set".
I used the sample "Manually Setting the Scroll Range" and the part that I was missing is setting the zedGraphControl1.ScrollMinX and zedGraphControl1.ScrollMaxX properties. Once I defined these values everything started working as expected. I also found that in my case, the value of zedGraphControl1.IsAutoScrollRange had no effect, but I left it set to false to be consistent with the example. This would probably have an effect if the dataset is dynamic.
I want to persist the user's location in the document he or she is browsing, then bring them back to that spot when they return from tombstoning or between sessions.
My first approach was to wrap the browser component in a scrollviewer, but it turns out it handles its own scrolling and the scrollviewer never changes its verticaloffset.
My guess is that the browser component must have a scrollviewer or something like it embedded in it. I need to get the verticaloffset and scroll to an offset.
Any guesses how to get there?
My next approach would be a painful mish-mash of javascript and c# to figure out where they are...
Because of the way the WebBrowser control is built you'll need to track scrolling in Javascript then pass the location to managed code to handle storage of that value.
On resuming you'll need to have the managed code pass the scroll position to a Javascript function to reset the scroll position.
That's the theory but I haven't looked at the funcitonality around javascript scrolling events in the WebBrowser yet. That's the only place I can see possible problems.
Would be good to hear how you get on.
I've accepted Matt's answer, but I want to put in some details here. I'm also going to blog about how I did it once I'm completely done.
Since the WebBrowser component is essentially a black-box, you don't have as much control as I would like. Having said that, it is possible to get and set the vertical offset.
Javascript lets you ask for the value, but different browsers use different variations on HOW to ask. For THIS case I only have one browser to worry about.
First I make a couple of simple javascript functions:
function getVerticalOffset() {
return document.body.scrollTop;
}
function setVerticalOffset(offset) {
document.body.scrollTop = offset;
}
Next I call into the WebBrowser using the InvokeScript method on the browser object.
I'll post an update here with a link to my blog when I get the full write-up done.
I have been writing an eBook reader and had a similar question. Code for setting a scroll position has been easy enough to find.
Code for setting vertical scroll position:
string script = string.Format("window.scrollBy(0,{0});", "put your numeric value here");
wb_view.InvokeScript("eval", script);
Google didn't help much in finding solution for getting the value of current scroll position. Lacking any knowledge in javascript it took me almost two hours to get it right.
Code for getting the vertical scroll position:
var vScroll = wb_view.InvokeScript("eval",
"var vscroll = window.pageYOffset; vscroll.toString();");
I'm running into a problem trying to anchor a textbox to a form on all 4 sides. I added a textbox to a form and set the Multiline property to True and the Anchor property to Left, Right, Up, and Down so that the textbox will expand and shrink with the form at run time. I also have a few other controls above and below the textbox.
The anchoring works correctly in Visual Studio 2005 (i.e. I can resize the form and have the controls expand and shrink as expected), but when I run the project, the bottom of the textbox is extended to the bottom of the form, behind the other controls that would normally appear beneath it. This problem occurs when the form loads, before any resizing is attempted. The anchoring of the textbox is correct for the top, left, and right sides; only the bottom is malfunctioning.
Has anybody heard of this and if so, were you able to find a solution?
Thanks!
UPDATE:
Here is some of the designer code as per Greg D's request (I am only including the stuff that had to do with the textbox itself, not the other controls):
Friend WithEvents txtRecommendationText1 As System.Windows.Forms.TextBox
<System.Diagnostics.DebuggerStepThrough()> _
Private Sub InitializeComponent()
Me.txtRecommendationText1 = New System.Windows.Forms.TextBox
' ...snip...
'txtRecommendationText1
Me.txtRecommendationText1.Anchor = CType((((System.Windows.Forms.AnchorStyles.Top Or System.Windows.Forms.AnchorStyles.Bottom) _
Or System.Windows.Forms.AnchorStyles.Left) _
Or System.Windows.Forms.AnchorStyles.Right), System.Windows.Forms.AnchorStyles)
Me.txtRecommendationText1.Location = New System.Drawing.Point(4, 127)
Me.txtRecommendationText1.Multiline = True
Me.txtRecommendationText1.Name = "txtRecommendationText1"
Me.txtRecommendationText1.Size = New System.Drawing.Size(223, 149)
Me.txtRecommendationText1.TabIndex = 10
End Sub
ANOTHER UPDATE:
The textbox I originally posted about was not inherited from a baseclass form (although it was added to a custom User Control class; I probably should have mentioned that earlier), but I recently ran into the same problem on a totally unrelated set of controls that were inherited from a baseclass form. It's easy to blame these problems on possible bugs in the .NET framework, but it's really starting to look that way to me.
Is your Form localized? Check the resource files for an entry with Textbox.Size, delete is and reset the size.
Is your Form inherited and is the Textbox on the baseform? Try setting the Textbox's access modifier to Protected or Public.
Have you implemented custom resize logic? Turn it off and see if the problem is still there.
Have you entered a Textbox.MinimumSize/MaximumSize? Remove or change the value.
It might also be a combination of these things...
Does the form snap back to the expected layout when you resize it after it's been initialized weirdly? Also, have you set a Height or MinimumHeight/MaximumHeight property for the text box?
If possible, a few snippets from the designer code might be useful. :)
One possibility that I've run into in the past is DPI. If you're running/testing your code on a machine with a different DPI setting than the machine that you're developing on, you may observe some strange things.
The anchor functionality essentially establishes a fixed distance between the edge of a control and the edge of the control's parent. Is your textbox embedded within another control (e.g., a panel) that doesn't have its anchors properly set? Right clicking on the text box in the designer should pop up a menu that lets you select any controls that exist underneath it, also.
Does your program include any custom resize logic, or does it modify the size of the textbox programmatically outside of designer-generated code? That might also result in weird behavior. I've assumed maintenance for a number of pieces of software at my organization where the original developers spent a great deal of time implementing (buggy) resize logic that I had to tear out so that I could just let the designer-generated code do the work for me.
The textbox I originally posted about was not inherited from a baseclass form (although it was added to a custom User Control class; I probably should have mentioned that earlier), but I recently ran into the same problem on a totally unrelated set of controls that were inherited from a baseclass form. It's easy to blame these problems on possible bugs in the .NET framework, but it's really starting to look that way to me.
It's very likely because of the 'AutoScaleMode' property being set in InitializeComponent(). Try setting it to 'None' and see if that fixes it. I've had these problem a couple of times now.