In the show method of one of my views I run:
mobileApp.navigate('views/Login.html');
mobileApp is a kendo.mobile.Application-object.
This works fine the first time show runs. But the second time I get this exception:
"Cannot read property 'stop' of undefined"
The same happens if I put the navigate-code in beforeShow. But if I put it in another method triggered by a click on a button it works every time.
Please check the documentation and the code snippet for in the beforeShow event.
Related
Here is my Basic Code
The formFlow works fine and after checking the if condition ,it should go to the else part ,which it does, but in the else part the wrote this line of code
await Conversation.SendAsync(activity, () => new AskMeAnything());
AskMeAnything is a class implementing Idialog. The problem is ,its again going/calling the formflow rather than jumping into the above mentioned dialog.
I read about IdialogStack but unable to understand how to remove the dialog on top of stack or something related to it.
i need help in moving to other dialog without looping into formflow.
Thanks
The first time you call Conversation.SendAsync(...) you actually create a root dialog for your conversation. Every consecutive call to the bot will still enter the controller but will be routed to the dialog at the top of the stack.
So when you call Conversation.SendAsync(...) for a second time you are actually trying to change the root dialog in the stack. I don't think this is possible and that's why your form is called again.
To solve this problem I would create a different dialog and make that dialog your root dialog. From this root dialog you can call your form and any other dialog.
I am a beginner in Xamarin and learning to write test using NUnit framework. I am testing an app where am getting some problems in writing test cases some of them i solved but i need some help in solving other issues that am facing. Referring the official Xamarin documentation and learning the scripts but i am not able to find solution for the below issues.
When i use repl() and tree method for a screen of the app not able to get the elements where as if i use uiautomatorviewver then am getting all the elements in the screen. so to tap these elements i used TapCoordinates method to click on the elements and its working fine.
My question is why am not getting the elements in UI if i use repl and tree commands?
If we use tapcoordinates Is the script works for scalability i.e for the other screen sizes? If its not works for other screen sizes then how to solve this problem?
I have script that has to wait for some time before executing a command Is there any method to stop execution till some Micro Seconds?
//Click on Next buttons available at first four pages
app.TapCoordinates(752, 1650);
app.TapCoordinates(752, 1650);
app.TapCoordinates(752, 1650);
app.TapCoordinates(752, 1650);
//Click on Launch Button to move to I agree checkbox
app.TapCoordinates(752, 1650);
// Click I agree button
app.TapCoordinates(772, 1685);
// Click Login Button on the same screen as I agree checkbox
app.TapCoordinates(315, 1240);
//Entering user name
app.EnterText(e => e.Css("input#cwsUID"), "qaqa68");
//Entering password
app.EnterText(e => e.Css("input#cwsPwd"), "Harmony1");
//Click Login button
app.Tap(e => e.Css("input#submitButton"));
In the above script i want to delay execution between the steps. The problem is its executing the scripts when i ran on a device after the first line execution its trying to execute second line but till then the second page is not loaded so i have to stop execution till that next page is loaded or some MS.
You can use app.WaitForElement() and wait for an element that exists on the second page, and the test will pause until that page is loaded.
I am getting crazy with a problem that I found when executing a Visual Studio Coded UI Test.
The scenario is as follows.
I recorded a Coded UI Tests that do the following steps in a Web Application (Microsoft Dynamics CRM 2011):
Login into an application
Navigate into a page
On the page set the selected value of a html combobox
The test is able to do all those steps without a problem, even selecting the value in the combobox.
The web application have a piece of Javascript that is executed when the selected item changes.
if one of the values is selected then an alert message is presented to the user and the application will set the selected item to a default one!
The javascript code look like this:
switch (Xrm.Page.getAttribute("status").getValue()) {
case 3: //Authorised
alert("Please use the method XPTO to update the record status to Authorised!");
Xrm.Page.getAttribute("status").setValue(1);
Xrm.Page.getControl("tatus").setFocus(true);
return false;
The UI Test method that is performing the change in the combobox is as follows:
/// <summary>
/// Select a value in the Status dropdown box
/// </summary>
public void SelectStatus()
{
#region Variable Declarations
HtmlComboBox uIStatusComboBox = this.UIHttpsappWindow200.UIModuleUITEDocument5.UIWorkplaceDashboardsFrame.UIModuleUITEDocument.UIStatusComboBox;
// Select 'Authorised' in 'Status' combo box
uIStatusComboBox.SelectedItem = this.SelectStatus_SPParams.UIStatusComboBoxSelectedItem;
}
The test method is able to change the value in the combobox, and an alert message is displayed to the user. However this part of the code uIStatusComboBox.SelectedItem = this.SelectStatus_SPParams.UIStatusComboBoxSelectedItem;
never returns and the test just hangs there until it timeouts!
I have no ideia how to work arround this issue! I was thinking that maybe the problem could be in the fact that we have javascript code that is executed after the alert is displayed to the user. I changed the JS so that the alert message is the last thing to be displayed but it also didn´t help!
I also noticed that if I click Ok on the alert message the test Pass!
If I select other value that dont trigger any JS the test also Pass!
Does anyone have any idea about this issue?
Edit 1:
I noticed another thing, I can use the BrowserWindow object to send a JS script to the browser. If I try to create an alert message the call also gets blocked until I click on the Ok button, on the alert!
BrowserWindow bw = BrowserWindow.Locate("My window");
bw.ExecuteScript("alert('This is just a simple alert.');");
The ExecuteScript statement also gets blocked until I click on the OK button!
This seems very very strange!
I believe I have found a workaround.
I was googling to find anything that could help me with this issue and I end up finding this question on StackOverflow Coded ui test - Select an item from a combobox without using mouse coordinates
I try to select the same item in the Dropdown without using the "SelectedItem" property of the HtmlComboBox element.
I try to use the keyboard to select the element in the dropdown box, first I click on the Dropdown and then I use the Down key and Enter key to select the element that I want:
public void SelectStatus_SP(string SelectedItem)
{
#region Variable Declarations
HtmlComboBox uIStatusComboBox = this.UIHttpsappWindow200.UIpopupUITEDocument5.UIWorkplaceDashboardsFrame.UIpopupUITEDocument.UIStatusComboBox;
#endregion
Mouse.Click(uIStatusComboBox);
Keyboard.SendKeys(uIStatusComboBox, "{Down}{Down}{Enter}", ModifierKeys.None);
}
In my case the element that I want to select is the 3rd one, so I go down 2 times and then hit enter on the element I want to select.
This workaround is not so good because if the element changes position I will select the worng one! But this was the only way I got for the test not to be stock in that part!
I wonder if anyone had a similar issue. Because to me this seems like a bug in the Coded UI Test engine, It doesn´t make any scence for the test to be stocked while the alert is not closed!
When I add a new row kendo ui grid it does not move to next page even I set page number dynamically.
But when there is a javaScrip alert it's working fine.
Has any one faced this issue before. Please suggest me a solution.
Thank you.
The problem is that when you add a new row there are a series of actions that happen in parallel and they are not immediate. If you try to move to the end but the row still is being created, if fails.
When you add an alert, you delay the fact of moving and creation now have time.
If you really need to do it, you can add a timeout (delay) it is not nice/clean but should work.
Do something like:
setTimeout(function() {
grid.page(3);
}, 500);
for introducing half second (500 ms) delay, should be enough.
We had sort of similar issue in IE - onchange fired twice with alert in the event handler. According to what you saying, it sounds like when the alert is NOT in you are getting correct behaviour. Review your code without having the alert in or post a fiddle. Below is an answer from Kendo support in regards to alerts while debugging. Do not use alerts with kendo to stay safe.
Basically this behavior is caused by using "alert" method for debugging purposes - please note that this is not recommended because it can lead to unexpected behavior when interacting with focusing elements. After replacing the "alert" method and with "debbuger" command or "console.log()" function the change event is working as expected - please check this screencast(http://screencast.com/t/7qIAdK6hZ5kD).
Hope it helps.
I have a button, onclick of which I'm doing an AJAX call to one of my pages (which contains jqplot elements).
Now, the AJAX req/res works fine for the first click of the button.
When I click my button for the second time, I get an exception saying,
Uncaught Error: can't load XRegExp twice in the same frame
And it points to the jQuery-min file. Any idea on how I can solve this issue?
I have tried this solution and it does not work.
I think the handler is getting "attached" before the DOM element in question actually exists.
Try using jquery.on().