I used Homebrew to install Z shell (zsh) 5.0.7 on my Mac.
For the life of me, .zshrc is nowhere to be found. It is not in ~. Is is not in /etc or /etc/zshrc as they suggest here: http://zshwiki.org/home/config/files
Am I supposed to create it myself?
Sure. If it's not there already, create it yourself.
$ touch ~/.zshrc
You can run the helper script zsh-newuser-install from the prompt, and it will walk you through the process to create an initial .zshrc in your home directory.
As kyranjamie mentioned, you can create it using following command
$ touch ~/.zshrc
Example content of .zshrc file:
PATH=$PATH:/your_path_goes_here
In order to find any file on a Unix-based system, you can try the command:
$ locate filename
It should list all the paths where the corresponding file exists.
In Unix based systems, touch command followed by name will create an empty file in the present directory.
the modification and access time of each file is also updated with the use of touch command.
In your case, to create .zshrc file, you can use the touch command as :
$ touch ~/.zshrc
Related
-bash: export: /Users/deboadebayo/Desktop/Coding/:/opt/anaconda3/bin:/Library/Frameworks/Python.framework/Versions/3.8/bin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin':
not a valid identifier
The above message is the error message I receive every time I open my terminal. I did create a backup of my bash profile. But essentially now I can no longer navigate anywhere I want to go using command line requests.
Any help would be much appreciated
If you have a backup, use an absolute path to the mv and cp commands to rename your broken file and restore the backup, both without depending on path lookup.
/bin/mv .bash_profile .bash_profile.broken
/bin/cp .bash_profile.backup .bash_profile
Close the current terminal window and open a new one, which should use your working, original .bash_profile to initialize PATH. Now you try to make the correct modification to your PATH.
oops. The easiest way to fix it would be to launch an editor with an absolute path. $PATH only specifies the locations in which the shell will search if told to execute a program relative (or no) path specified. The which program can search the path and shows the first executable found:
$ which vim
/usr/bin/vim
So if you're a vim user, you should be able to run /usr/bin/vim at the command line, and the path won't be relevant. Then you can fix your file in the editor. Looks like my osx machine also has nano if you'd prefer that editor. I don't think I installed it so it probably came shipped with osx I'm guessing:
$ which nano
/usr/bin/nano
If you want to revert to your backup, use cp, but specify it from its absolute position, /bin/cp:
$ /bin/cp first.txt second.txt
Obviously you'll want to change the file names on that one for it to work for you.
I'm trying to install flutter
I need to create with the terminal a file named bash_profile
I tried to create it but each time that I'm trying, I'm getting a bash_profile file with an extension: bash_profile.swo and bash_profile.swp instead of bash_profile.
How can I remove the 2 bash_profile.swo and bash_profile.swp?
thank you
You can simply use echo '' >> .bash_profile.
You can also use the touch command to do it.
Remember that bash_profile file is a occulted file. you probably already have this file, try check it by running ls -la.
and you must to use a 'dot' before 'bash' >> .bash
I try to work with a project in vagrant.
I have made the command vagrant ssh, and connected to VM. Now I need to edit .bashrc file to set path to the source code. But first I couldn't find that file. So I googled and find that the way is call command ~/.bashrc. But doing this I get message, that I have no access to it:
[vagrant#nupic-vagrant:~]$ ~/.bashrc
-bash: /home/vagrant/.bashrc: Permission denied
So what to do now?
UPD.
I can't find the .bashrc file.
When I try to make command ls -a I get following:
[vagrant#nupic-vagrant:~]$ ls -a
. .bash_logout cleanup.sh sshd.sh .veewee_params
.. .bash_profile minimize.sh vagrant.sh .veewee_version
.bash_history .bashrc .ssh .vbox_version .zsh_profile
[vagrant#nupic-vagrant:~]$ locate .bashrc
/etc/skel/.bashrc
/home/vagrant/.bashrc
/var/chef/backup/etc/skel/.bashrc.chef-20130614181911
/var/chef/backup/home/vagrant/.bashrc.chef-20130614181912
[vagrant#nupic-vagrant:~]$
But only the place where I can find some of those files is the directory where cygwin is installed. Pls, see illustrations, they reflect relations between directories vagrant and cygwin.
.bashrc is not meant to be executed but sourced. Try this instead:
. ~/.bashrc
or, equivalently
source ~/.bashrc
See the reference about the . (aka source) builtin.
Note that if what you're looking for is to restart your Bash session after modifying your ~/.bashrc file, you might as well use:
exec bash
That will replace your current Bash session (thanks to exec) by a new session.
If you want to edit that file (or any file in generally), you can't edit it simply writing its name in terminal. You must to use a command to a text editor to do this. For example:
nano ~/.bashrc
or
gedit ~/.bashrc
And in general, for any type of file:
xdg-open ~/.bashrc
Writing only ~/.bashrc in terminal, this will try to execute that file, but .bashrc file is not meant to be an executable file. If you want to execute the code inside of it, you can source it like follow:
source ~/.bashrc
or simple:
. ~/.bashrc
If you can't access the file and your os is any linux distro or mac os x then either of these commands should work:
sudo nano .bashrc
chmod 777 .bashrc
it is worthless
The .bashrc file is in your user home directory (~/.bashrc or ~vagrant/.bashrc both resolve to the same path), inside the VM's filesystem. This file is invisible on the host machine, so you can't use any Windows editors to edit it directly.
You have two simple choices:
Learn how to use a console-based text editor. My favourite is vi (or vim), which takes 15 minutes to learn the basics and is much quicker for simple edits than anything else.
vi .bashrc
Copy .bashrc out to /vagrant (which is a shared directory) and edit it using your Windows editors. Make sure not to save it back with any extensions.
cp .bashrc /vagrant
... edit using your host machine ...
cp /vagrant/.bashrc .
I'd recommend getting to know the command-line based editors. Once you're working inside the VM, it's best to stay there as otherwise you might just get confused.
You (the vagrant user) are the owner of your home .bashrc so you do have permissions to edit it.
Once edited, you can execute it by typing
source .bashrc
I prefer to logout and in again (there may be more than one file executed on login).
Please find the step to fix bash restricted error on Linux servers.
If you are getting below restricted message while try to login to the server by using your credentials , then it might be an issue with lack of directory permissions in the server.
Because of this permission issue we were unable to navigate to required directories and getting error “bash: cd: restricted”
Fix : To release bash restriction error use the highlighted command in Linux server -bash -f
As same if wants to restrict the permission use the highlighted command - bash -r
Once you executed the bash -f command the restrictions will be released from the directories and we can able to proceed with patch scripts.
I was trying to install Sencha Touch SDK tools 2.0.0 but could not run it properly. It created an entry in the $PATH variable.
Later I deleted the sencha sdk tools folder but didn't realize that the path variable is still there.
When i did echo $PATH I got -
/Applications/SenchaSDKTools-2.0.0-beta3:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin
I searched on how to remove variables from $PATH and followed these steps :
Gave the command PATH="/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin"
Did echo $PATH which showed /usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin
gave the command export PATH
Closed terminal and reopened it. Gave the command echo $PATH. This time I got
/Applications/SenchaSDKTools-2.0.0-beta3:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/bin:/usr/X11/bin
Can anyone tell me what am i doing wrong?
echo $PATH and copy it's value
export PATH=""
export PATH="/path/you/want/to/keep"
Check the following files:
/etc/bashrc
/etc/profile
~/.bashrc
~/.bash_profile
~/.profile
~/.MacOSX/environment.plist
Some of these files may not exist, but they're the most likely ones to contain $PATH definitions.
On MAC OS X Leopard and higher
cd /etc/paths.d
There may be a text file in the above directory that contains the path you are trying to remove.
vim textfile //check and see what is in it when you are done looking type :q
//:q just quits, no saves
If its the one you want to remove do this
rm textfile //remove it, delete it
Here is a link to a site that has more info on it, even though it illustrates 'adding' the path. However, you may gain some insight.
What you're doing is valid for the current session (limited to the terminal that you're working in). You need to persist those changes. Consider adding commands in steps 1-3 above to your ${HOME}/.bashrc.
If you're removing the path for Python 3 specifically, I found it in ~/.zprofile and ~/.zshrc.
$PATH contains data that is referenced from actual files. Ergo, you should find the file containing the reference you want to delete, and then delete said reference.
Here is a good list to run through progressively [copied from #Ansgar's answer with minor updates].
/etc/bashrc
/etc/profile
~/.bashrc
~/.bash_profile
~/.profile
~/.MacOSX/environment.plist
/etc/paths
/etc/paths.d/
Note that /etc/paths.d/ is a directory that contains files with path references. For example, inside this directory may be a file called, say, fancy-app, and inside this file you'll see an entry like below:
/path/to/fancy-app
This path will appear in your $PATH and you can delete the entry in the file to remove it, or you can delete the file if it has only the one reference you want to remove.
Use sudo pico /etc/paths inside the terminal window and change the entries to the one you want to remove, then open a new terminal session.
when you login, or start a bash shell, environment variables are loaded/configured according to .bashrc, or .bash_profile. Whatever export you are doing, it's valid only for current session. so export PATH=/Applications/SenchaSDKTools-2.0.0-beta3:$PATH this command is getting executed each time you are opening a shell, you can override it, but again that's for the current session only. edit the .bashrc file to suite your need. If it's saying permission denied, perhaps the file is write-protected, a link to some other file (many organisations keep a master .bashrc file and gives each user a link of it to their home dir, you can copy the file instead of link and the start adding content to it)
Close the terminal(End the current session). Open it again.
If the manual export $PATH method does not seem to be working after you close the terminal and open again, definitely check the shell configuration files.
I found a small script that kept adding some more path in front of the $PATH everytime it was open.
For zsh you can check the ~/.zshrc file.
I am on Mac's OS 10.6, and I am trying to learn a thing or two about shell scripting. I understand how to save a shell script and make it executable, but I am wondering what I can do or where I can save the file to make it global (that is, accessible no matter what folder I am in).
For example, if I save a .sh file in the /Users/username/ directory and make it executable, I can only execute that script in that specific directory. If I navigate to /Users/username/Downloads, for example, I can't execute the script.
Also, any suggestions of resources for learning more about shell scripting would be helpful. Thanks
/usr/local/bin would be the most appropriate location. Mac OS X has it in the PATH by default
There are two ways to do it -
Put your script in usr/local/bin and make sure it is executable(chmod +x my_script)(This is already set in the path, you can check by doing an echo $PATH)
Create a folder in your home directory called bin. (For your personal scripts)
cd ~ (Takes you to your home directory)
mkdir bin (create a bin folder)
vim .bash_profile (to set path environment variable)
export PATH=~/bin:$PATH (Press i then add this line and then do esc and type :wq)
Now you can just type the name of your script and run it from anywhere you want.
** NOTE: If you want to run the script with a shortened command rather than typing your entire filename, add the following to your .bash_profile:
alias myscript='my_script.sh'
Then you can run the script by simply typing myscript. (you can sub in whatever alias you'd like)
Traditionally, such scripts either go in ~/bin (ie: the bin directory in your home directory) or /usr/local/bin/ The former means the script will only work for you, the latter is for scripts you want anybody on the system to be able to run.
If you put it in ~/bin, you may need to add that to your PATH environment variable. /usr/local/bin should already be on the path.
In mac operating system
Open bash ~/.bashrc file.
add path of your script in your bashrc file , using
export PATH="$PATH:/Users/sher.mohammad/Office/practice/practiceShell"
Open your ~./bash_profile file and add [[ -s ~/.bashrc ]] && source ~/.bashrc
open new terminal window
Now whenever you will open your terminal your script will be loaded
This one is super easy if you are familiar with your bashrc file! This will entirely use just your .bashrc file and takes 2 seconds to accomplish.
(I use Arch Linux Manjaro so I use .bashrc located in my home directory)
The code to be placed in your .bashrc file:
# Simple bashrc method to launch anything in terminal from any directory
YOURCOMMAND () {
cd /path/to/directory/containing/your/script/ && ./YOURSCRIPT
}
As you can see, first you use the simple 'cd' command and give it the directory of the scripts location, then use '&&' so that you can make the next command executed right after, and finally open your script just as you would normally! Super easy and saved right in your .bash file! :)
Hope I've helped someone!
Sincerely,
AnonymousX
On using bash shell, write that script as function and then put it to the .bashrc or source the file which containing that function by "source file_name"
Now execute the script by function call in the shell.
Either saving it in /usr/bin (or any other directory present in PATH) or editing PATH to include the directory you saved it in will basically make it run in any directory.
from the working directory of 'script.sh'" mv [script.sh] /usr/local/bin"( not tested but seems to be the least complex way IMO.)
You should put it in the global executable directory on your machine. I think that would usually be /usr/bin on Unix-based operating systems (this would however most often require super user privileges on that machine).
You could also put it in any other directory that is in the $PATH environment variable, although it would only work for those users who have that directory in that variable.
You can find the value of $PATH by typing echo $PATH in a shell. The directories are separated by :.