I have a USB 3.0 Male to Male cable and I want to have Computer A connected to Computer B through it but have Computer A recognize Computer B simply as a storage device, such as a USB drive or thumb drive.
I'd need to be able to specify which folder(s) are included on the virtual USB drive so that I can just include certain movies, music, pictures, etc. on the drive without having to relocate the files.
NOTE: This may be irrelevant but let me go into a bit more detail. Computer A is my computer while Computer B is my XBOX One. The goal is to be able to stream media through USB to my XBOX One since my WiFi is terrible and makes media buffer constantly. I am aware that I can use wired Ethernet connections since they are right next to each other but I want USB so that I can keep my LAN port on my computer open.
Have you tried using a ftp server on your PC? These use WiFi but don't need the internet they just use the router as a gateway [enter link description here][1]
http://download.cnet.com/windows/ftp-software/
Related
When I connect several USB audio devices using the default drivers I usually end up with some kind of friendly device description like "nn- USB Audio codec" or something else, so I have currently no unique property which refers to a specific hardware the e.g. manufacturer ID. I would like to ensure that in case of re-enumerating or replugging the hardware to a different port that my software will automatically identify the changed windows audio device which maps to this hardware. I there a possibility to gather further windows audio device information which can be used to determine the physical hardware ?
Maybe a little clarification is needed:
I have two or more USB audio devices, not necessarily same product or manufacturer. The audio connections have different purposes, so I want to ensure that I my software uses constantly the same physical audio devices for different tasks. This sometimes fails when a re-enumeration occurs ( sometimes without changing the physical USB port connections, it's a windows thing...)
Ideally I would distinguish them by an individual serial number, which usually is only available with storage devices. But what I can retrieve is the "physical" USB topology when I'm looking at the device with a tool such as USBDeview from Nir Sofer. There I have a property like "Hub 3, Port1". If I could map this to a sound device I get from audio audio api like "nn- USB Audio codec" as seen in the sound control panel I would be perfectly happy.
Edit2:
May be this[1] post helps here, but I still have to figure out how to get a USB Port <-> Windwos Sounddevice mapping.
[1]: Can the physical USB port be identified programatically for a device in Windows? "
I have a TDS Nomad running windows CE 5.0 system. It has a USB host port. I have connected to the manufacture and ask if nomad can connect to more than 1 USB devices via USB hub (can connect to 7 USB devices, designed for windows ), they said they haven't tested to connect more than one USB device. If more than one devices is connected to nomad, there mightbe resource conflict.
The nomad works well with one USB device connect to it individually.
But I have a console application debugging in nomad using visual studio2005 and active sync.
I need to talk to both USB devices. Therefore I have to use USB hub. But it doesn't work most of the time. I think the drivers of two USB devices are all correctly installed on nomad.
But what I want to ask, is that has anyone tried to connect more than one USB device to windows CE product via USB hub and both of them works well ?
I'm slightly confused. here. You say the device has USB host and you want to connect more than one client device through a hub. This is definitely supported by the OS, and I've done this with several devices from several manufacturers, though never with a Nomad. Not sure what the OEM is talking about with "resource conflicts" as the USB spec itself allows for multiple devices (kind of the whole point behind a "bus").
But you say that your second "device" is the debugger. That isn't a USB Host connection from the device perspective, that's a USB Client connection, and it typically uses completely different hardware and drivers for that connection. Can a device have both a host and a client connection? Again, yes I've done this with many devices (but not a Nomad) and the OS fully supports it.
Now maybe this is USB OTG hardware (though back in the 5.0 days I doubt it) and the OEM didn't do the design well to handle a client and a host at the same time. Maybe the physical hardware is laid out poorly or the OAL portion of their USB driver is poorly done and can't route properly through a hub properly (I've definitely seen that before). Hard to say.
A USB Analyzer would tell you a whole lot about what's actually happening and where the problem is, but it is definitely a supported scenario by both the USB spec and the OS. If it's failing, it's a manufacturer/device-specific problem.
I need to develop an encrypted USB Flash drive to protect my data. Here is the high level idea:
When USB will be plugged in PC, it will show one application, for example "openfile.exe"
When I run the "openfile.exe" it will open the USB (need to give password) for saving other files in it.
Now user can save file in the USB as usual which will be encrypted.
When I plug out the USB from the PC and plugin again, it will start from Step 1
So user always see the "openfile.exe" after plugin it until they run my application
placed in USB. And data will be secured.
I have no idea, how about creating Virtual USB Simulator?
Any one have idea how to proceed?
Thank you.
It's not virtual USB simulator, but a virtual file system (you create a virtual disk with a drive letter that is mapped to real location with help of drivers). Several of our products (namely CBFS Storage and CBFS Connect) can be used for this task.
The drawback of this approach is that you have to install the kernel-mode drivers to the system. Your application can do this on the fly, but it needs to have administrative privileges for this task. I.e. the scenario when you come to internet cafe, plug your USB stick and have an encrypted disk is almost never possible (cause admins of internet cafe won't give you admin rights).
I need to create a application that will allow a Windows PC (XP/Vista) to emulate a thumbdrive. That is, when the PC is plugged into either another Windows system, or in this case, a piece of hardware that allows for USB thumbdrives to be plugged in, a folder on the computer looks like a giant thumbdrive. Any thoughts on where a guy would start to investigate this?
Update (more specific description):
I need to connect my PC to one of the newer multifuction devices that support scanning to a USB thumbdrive that is inserted into the front of the device. These units do not support WIA or TWAIN via the rear USB connector that you'd typically use for connectivity to a PC.
Most USB controllers in regular pc's dont have the possibility to function as an USB slave. So I'd start with investigating what kind of hardware you're going to use.
Another way to go: there are USB Link cables to link up 2 pc's over USB, maybe that's usable for you?
You cannot do this in an application. At the lowest level, the USB ports on your computer are controlled by an Host Controller Interface. This chip will manage up to 127 slave USB devices. You would need to seriously reprogram this chip before it implements the slave side of the USB protocol. Of course, at that point any USB hub in your PC will break down - those 8 USB ports you probably have are usually implemented by 2 smart USB hubs connecting to both USB1 and USB2 host controllers. Next, your USB keyboard and mouse will stop working.
Take an MCU with two Slave USBs. Write a simple frimware which makes one USB act as a Special Device Class and wait until PC on this USB provides mandatory data (including Device Class, of course) for the other USB. Write a PC program which connects to the Special Device (your MCU), uploads Mass Storage Device Class and redirects I/O to a dedicated partition. The other USB on the MCU will become an emulated Mass Storage Device.
Some of those code can be taken from Linux.
I'm looking for a very specific USB device for debugging systems that may use USB but not with a regular computer (proprietary hardware). I want a device that has a USB host controller and two USB device connections. The device to be debugged is connected to the USB host controller and one of the device connections is connected to another device with it's own host controller on it. The the other device connection is connected to a pc. The point being that all USB data travelling through the device (from the device connected to the host controller to the device connected to the first device connection) is reported to the pc.
I'll happily write software to do the logging (in fact I want to) but I can't seem to find a board like this anywhere. Can anyone help?
I have an Ellisys USB analyser, which isn't exactly what you describe internally, but does sit between a peripheral and a host and use a separate PC to collect the data.
(i.e. it has two 'B' and one 'A' connectors on it.)
Excellent product, and very helpful company.
Sniffing the USB shouldn't be too hard if you have the right hardware. And that is the tricky question. I haven't seen anything that describes the USB breakout box that you want. However I can say that this is in the realm of the following two magazines:
Nuts and Volts
Circuit Cellar
If they don't have a USB breakout box project in their archives, then at least they will have advertisements for small cheap single board computers that would have multiple USB ports that you can use for buffering the signals and reporting it back to your PC.
Alternatively is it possible to just wire your PC up to the middle of your two devices and write a custom drive that echos data back and forth while sniffing off a stream for you?
Sorry for the long delay in my reply -- I checked out one of our USB developer's toolchain, and he uses a Beagle USB Sniffer. He seems happy with it.
You're looking for a USB device with two upstream outputs. I think according to the USB spec, this is not possible. You will have two USB hosts trying to send messages and control the USB devices at the same time.
What if you were to look for a device which allowed you to view the data going through a hub via something other than a usb output?
If you're building something custom, take a look at this USB chip site. The chips are programmable via a windows application. Once you define how you want it to operate, it's saved on an EPROM on the dev board ($30-$50).
Sorry if this isn't helpful!