Related
I have a fresh install of VS2015 on windows 8 and intellisense doesn't work at all (nothing!) in any environment.
I also have VS2013 (with Resharper 8)on the same machine which works fine.
Any ideas before I go through a re-install?
Probably the problem is with ReSharper, I'm running VS2013 and VS2015 on the same machine without any issues.
I would try:
In Visual Studio 2015, go to 'Tools | Options | Text Editor | C# | General both "Auto list members" and "Parameter information" should be checked.
If that doesn't work I would try to disable ReSharper in VS2013 and try to get the normal intellisense working. Same procedure as above if ReSharper fails to restore the settings.
Note: Only do this as a last resort, because it will reset virtually all of your user preferences, including where your toolbars are, environment fonts etc.
I reached here because my intellisense was giving 1000's of errors in the Error List after installing Visual Studio 2015 on a clean Windows 7 machine.
The answers here did not apply to me, but this answer on StackOverflow: Razor intellisense not working in VS 2015, worked for me.
Run this command from the VS "IDE" folder:
devenv.exe /resetuserdata
When I restarted Visual Studio it took several minutes to "prepare Visual Studio 2015 for the first time", and when I reloaded the project all the intellisense errors had gone.
For info, this is how I navigate to the command prompt:
Right-click the Visual Studio 2015 shortcut on the start menu to get the context menu:
Select 'Open file location' to open a new Explorer window:
Left-click anywhere on the white to deselect devenv.exe, then shift + right-click to bring up the extended context-menu, then select 'Open command window here':
Then paste the command: devenv.exe /resetuserdata
When Visual Studio starts, it's been reset:
And when I load project, errors are gone:
Make sure Tools -> Options -> Text Editor -> C# -> IntelliSense -> "Show completion list after a character is typed" is checked. I had installed and uninstalled VS 2017 and that's when IntelliSense stopped working in VS 2015 for me.
How I fixed it:
I went to Tools -> Extensions and Updates and uninstalled every extension I wasn't using. There were only about 3 of these. One I remember removing was "Microsoft Office Extensions", or something like that. I don't have either resharper or Xamarin, which I've seen mentioned in relation to this. When I'd finished Visual Studio restarted itself, and XAML intellisense was back! Relief...
It may be the case that all you need to do is uninstall any one extension, and the resetting that VS does after that fixes the problem.
Further detail:
I don't recall changing anything specifically (eg. installing anything), when this problem suddenly appeared. I suspect it was due to a Windows update. I was really worried about this one!
I tried restarting VS, and restarting my PC, several times without success, and also checked my intellisense settings. I tried the suggestion of unchecking them and checking again.
My F# code had also lost intellisense. C# was fine, except for XAML.
It was in all VS2015 projects.
Version: Visual Studio 2015, Windows 10. January 2018.
I might be kind of late for the party, but hopefully this helps out anyone.
Please note, the below is just one possible cause for the issue described in this topic.
Your issue might be that you have one project/library referencing the other, but the Target Frameworks are different.
Make sure the frameworks are compatible and see if intellisense picks up your using references, etc.
First of all, I am not asking the same question here. ( This may be a duplicate post on Stack Overflow.) I have searched other solutions on MSDN, ASP .NET Forum, Stack Overflow, Code Project and everywhere on internet. But none of them solved my problem. These are the links that I found:
http://blogs.msdn.com/b/kirillosenkov/archive/2012/01/11/vs-hangs-for-1-minute-on-start-debugging-check-for-dead-symbol-paths.aspx
http://www.codeproject.com/Questions/272109/Visual-Studio-2010-Hangs-When-Debugging-App
And a lot more...
My CPU is 4th Generation Intel Core i7 and memory capacity is 8 GB. I think it is more than recommended hardware requirements.
Problem:
My visual studio hangs on these situations.
Opening a solution (Hangs for a minute when I open a file from solution explorer)
Running the debugging (Freezes consistently when I click on debug button) and
Stopping the debugging (Freezes immediately after the UI returns to the Developer layout after debugging)
I have tried the following steps:
I ensured that I deleted all the breakpoints in the solution.
I ensured that I am not using any resources from network drive.
I ensured Step over properties is enabled.
I ensured Enable .NET Framework source stepping is NOT enabled.
I start visual studio with SafeMode to suppress extensions
I cleared watch window.
I cleaned and rebuilt the solution.
Before I encounter this problem, I installed "Install Web Components" Visual Studio Add-In a few weeks ago. May be because of extensions and add-ins?
How can I do it to solve my problem?
If you suspect that Visual Studio settings get corrupted after installing "Install Web Component" bundle, why don't you try to reset the settings?
You can perform the steps below to reset Visual Studio settings:
Open Visual Studio Command Prompt (2010) under Start menu > All Programs > Microsoft Visual Studio 2010 > Visual Studio Tools (Run it with Administrator privilege: Right-click the program > Run as administrator)
Run devenv /Resetsettings to restore the IDE's default settings, optionally resets to the specified VSSettings file.
Run devenv /ResetSkipPkgs to clear all SkipLoading tags added to VSPackages.
Run devenv /Safemode to see if you can apply it correctly. This can eliminate the possibility that third party Add-ins or packages are causing problems.
Open your solution in Safemode and see whether it works.
Found this to happen also when the solution is connected to a Team Foundation Server and the service is not available at the moment, so the solution could not connect. In this case do not end the Visual Studio instance and wait until a message box show up giving the option to Go Offline. This is usually associated with the "Visual Studio is waiting for an operation to complete...." notification message.
My solution was simply to reload a saved GOOD (backup) copy of my settings (made a year ago). Worth trying before resetting everything to blank. My VS2010 would take 60 seconds to start debugging and approx. 3 minutes to stop debugging. I saved the corrupted settings and to my surprise they were over 3MB instead of 260Kb. I loaded the good backup copy and everything is great again :-)
If Visual Studio doesn't respond only when attempting to open solutions, then open a raw instance of Visual Studio then Reset Settings
Check How to: Reset Your Settings from the Tools Menu
http://msdn.microsoft.com/en-us/library/ms247075%28v=vs.90%29.aspx
This is Visual Studio 2013 and Windows 8.1
Open developer command prompt.
Start -> All programs -> Visual Studio -> Visual studio tools -> developer command prompt
Make sure that you don't have any pending changes that need to be checked in.
run this command : "tf workspace /delete 'your workspace/ machine name'"
yes for removing the unnecessary pending changes if at all present.
I'm running Visual Studio 2013 Pro (RTM version) on my formatted PC (Windows 8.1 fresh install).
I don't know why, but Visual Studio 2013 Pro is very very slow! Slow for building, debugging, navigating in the IDE... my hard disk drive LED is not lighting up at all!
I'm on a little MFC (C++) project using the Boost library.
Any ideas?
It is something concerned with the graphics drivers. If you update them you will be fine.
Or you can disable the hardware graphics acceleration in Visual Studio according to these steps:
In Visual Studio, click "Tools", and then click "Options".
In the Options dialog box, navigate to the "Environment > General" section and clear the "Automatically adjust visual experience based on client performance" check box. (Refer to the following screen shot for this step.)
Clear the "Use hardware graphics acceleration if available" check box to prevent the use of hardware graphics acceleration.
Select or clear the "Enable rich client visual experience" check box to make sure that rich visuals are always on or off, respectively. When this check box is selected, rich visuals are used independent of the computer environment. For example, rich visuals are used when you run Visual Studio locally on a rich client and over remote desktop.
References:
You experience performance issues, product crashes, or rendering issues in Visual Studio 2013
Try to set Current source control plug-in to None (menu Tools → Options → Source Control), if you are using the Microsoft Git provider, which seems to slow Visual Studio 2013 down more and more the larger the repository gets.
I had the whole Dojo Toolkit framework under source control using the Microsoft Git provider, and it got to the point where there were delays from the time I hit a key to the time the glyph would appear on the screen. That bad.
When/if you need Git again, you can switch to the TortoiseGit provider or Git-Extensions, both will work without slowdown. I like Git-Extensions, personally.
I too have struggled a bit with bad performance in Visual Studio 2013 (Premium). Pretty much the same issues as TS had. Slow navigation, scrolling, building... just about everything. Luckily I have manage to solve my own problem by disabling Synchronized Settings in Visual Studio.
Go to menu Tools → Options → Environment-Synchronized Settings and remove this option by unchecking the checkbox.
In the case of web applications, another cause of slow building and debugging (but not IDE navigation) could be the Browser Link feature.
I found that with this switched on, building would take 4 times longer and debugging was painful - after every postback, web pages would freeze for a few seconds before you could interact with them.
I was using a solution upgraded from Visual Studio 2012. Visual Studio 2013 also upgraded the .suo file. Deleting the solution's .suo file (it's next to the .sln file), closing and re-opening Visual Studio fixed the problem for me. My .suo file went from 91KB to 27KB.
I had the same problem and the only solution that worked for me was to follow the three steps presented below:
Clean the WebSiteCache folder (you may find it at
C:\Users\%USERNAME%\AppData\Local\Microsoft\WebSiteCache)
Clean the "Temporary ASP.NET Files" folder (find it at
C:\Users\%USERNAME%\AppData\Local\Temp\Temporary ASP.NET Files)
Restart Visual Studio
What fixed it for me was disabling Git by setting Current source control plug-in to None in Visual Studio, menu Options → Source Control:
This issue seems to be because of uninstalling the SQL Server Compact edition (4.0).
I was having this issue, and it got fixed after installing the SQL Server Compact edition 4.0.
On closing Visual Studio 2013, I was getting a message to install SQL Server Compact edition as a C++ project needed some thing... can't put finger on anything.
Resolve this issue by installing Microsoft SQL Server Compact 4.0
Microsoft SQL Server Compact 4.0
I can advise an option like this.
CodeLens can be disabled like as at the picture. It gives a lot of performance goodness.
If you are debugging an ASP.NET website using Internet Explorer 10 (and later), make sure to turn off your Internet Explorer 'LastPass' password manager plugin. LastPass will bring your debugging sessions to a crawl and significantly reduce your capacity for patience!
I submitted a support ticket to Lastpass about this and they acknowledged the issue without any intention to fix it, merely saying: "LastPass is not compatible with Visual Studio 2013".
I had the same problem and all the solutions mentioned here didn't work out for me.
After uninstalling the "Productivity Power Tools 2013" extension, the performance was back to normal.
One more thing to check; for me it was Fusion logging.
I'd turned this on a very long time ago and more or less forgotten about it. Getting rid of the 5000+ directories and 1 GB of logged files worked wonders.
There is a good workaround for this solution if you are experiencing slowness in rendering the .cs files and .cshtml files.
Just close all the files opened so that the cache gets cleared and open the required files again.
Visual Studio Community Edition was slow switching between files or opening new files. Everything else (for example, menu items) was otherwise normal.
I tried all the suggestions in the previous answers first and none worked. I then noticed it was occurring only on an ASP.NET MVC 4 Web Application, so I added a new ASP.NET MVC 4 Web Application, and this was fast.
After much trial and error, I discovered the difference was packages.config - If I put the Microsoft references at the top of the file this made everything snappy again.
Move the Microsoft* entries to the top.
It appears you don’t need to move them all - moving say <package id="Microsoft.Web.Infrastructure" has an noticeable effect on my machine.
As an aside
Removing all contents of the file makes it another notch faster too*
Excluding packages.config from Visual Studio does not fix the issue
A friend using Visual Studio 2013 Premium noticed no difference in either of these cases (both were fast)
UPDATE
It appears missing or incomplete NuGet packages locally are the cause. I opened the Package manager and got a warning 'Some NuGet packages are missing from this solution' and choose to Restore them and this sped things up. However I don’t like this as in my repository I only add the actual items required for compilation as I don’t want to bloat my repository, so in the end I just removed the packages.config.
This solution may not suit your needs as I prefer to use NuGet to fetch the packages, not handle updates to packages, so this will break this if you use it for that purpose.
For me, the problem was the Start page -- it was downloading content and causing Visual Studio to hang.
The only solution for me was to:
Kill the DevEnv process from Task Manager
Start Visual Studio in Safe Mode from the command line:devenv.exe /safemode
Go to menu Tools → Options, and select the Environment/Startup options
Choose "Show empty environment" for the startup action
Close Visual Studio
Restart normally
Running unit tests was slow. It was a ReSharper issue.
Menu ReSharper → Options → Environment → General ... Clear Caches
Menu Tools → Options → ReSharper → General ... Suspend Now
Close Visual Studio
Delete the .suo file.
Open Visual Studio again.
Re-enable ReSharper.
I also had an issue with a slow IDE.
In my case I installed
ReSharper
Npgsql (low chance to cause the problem)
Entity Framework Power Tools Beta 4
The following helped me a bit:
Disabled synchronization - menu Tools → Options → Environment-Synchronized Settings
Disabled plug-in selection - menu Tools → Studio → Options → Source Control.
Disabled Entity Framework Power Tools Beta 4 - menu Tools → Extensions and Updates
Uninstalled JetBrain's Resharper - WOW!! I am fast again!!
Change the Fusion Log Value to 0. It solved my issue.
This is the FusionLog key in the registry:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Fusion
Check ForceLog value (1 enabled, 0 disabled).
I was also facing this issue for quite long time. Below are the steps that I perform, and it works for me always:
Deleting the solution's .suo file.
Deleting the Temporary ASP.NET Files (You can find it at find it at %WINDOW%\Microsoft.NET\Framework\Temporary ASP.NET Files)
Deleting all breakpoints in the application.
Visual Studio 2013 has a package server running, and it was spending up to 2 million K of memory.
I put it to low priority and affinity with only one CPU, and Visual Studio ran much more smoothly.
Performance Explorer
Have you been using menu Analyze → Performance and Diagnostics? I have! It's awesome! But you may want to clean up.
Open the Performance Explorer. If you collapse all of the items in there, select all, then you can right click and do Delete.
My solution opens faster and is in general running much faster now.
Also you may notice changes to your sln file as shown. For me, this section was deleted from the sln.
GlobalSection(Performance) = preSolution
HasPerformanceSessions = true
EndGlobalSection
In Visual Studio 2015 Community edition, I've experienced a very (very) slow IDE after changing the "Environment Font" on menu Tools → Options... → Fonts and Colors.
Reverting this options back to the default value ("automatic") solved it immediately.
I had similar problems when moving from Visual Studio 2012 → Visual Studio 2013. The IDE would lock up after almost every click or save, and building would take several times longer. None of the solutions listed here helped.
What finally did help was moving my projects to a local drive. Visual Studio 2012 had no problems storing my projects on a network share, but Visual Studio 2013 for some reason couldn't handle it.
I had a Visual Studio 2013 installed, and it was running smoothly. At some point it started to get sluggish and decided to install Visual Studio 2015. After install, nothing changed and both versions were building the solution very slow (around 10 minutes for 18 projects in solution).
Then I have started thinking of recently installed extensions - the most recent installed was PHP tools for Visual Studio (had it on Visual Studio 2013 only). I am not sure how can an extension affect other versions of Visual Studio, but uninstalling it helped me to solve the problem.
I hope this will help others to realize that it is not always Visual Studio's fault.
I added "devenv.exe" as an exclusion to Windows Defender. This solved my problem completely. People can try this as their first try.
I have the same problem, but it just gets slow when trying to stop debugging in Visual Studio 2013, and I try this:
Close Visual Studio, then
Find the work project folder
Delete .suo file
Delete /obj folder
Open Visual Studio
Rebuild
None of the suggestions worked for me, but I did solve my problem. I had tried most of the other recommendations before coming to the following solution.
My Scenario/Problem:
Using Visual Studio 2017 with ReSharper Ultimate. Keyboard input in the IDE got super slow as others have described. The last change I made to my solution was to add a new web site project, so I looked into that. After trying a lot of things, I tried adding a second web site project, so I could try to replace the first one, and Visual Studio just tanked after that. It wouldn't even load the solution anymore.
My Solution:
I forced Visual Studio closed and then I removed the newly added web site project(s) from the .sln file using Notepad. After saving and starting Visual Studio, my solution loaded quickly and everything seemed to be back to normal. I added a new Web Site with a slightly different configuration (see the thinking below), and the problem did not present itself again.
My Thinking:
I think the problem stemmed from creating the new web site project and using a file system path to a network share that is hosted in Azure. I'm working over VPN which tends to slow things down, and I occasionally experience various routing problems with some services, so my problem/solution might be a bit of a snowflake. I changed the file system path to be a local repository and will publish the files as needed which seems like a much better way to go.
I had a Visual Studio behavior where the typing was slow for my HTML files. Previously when I installed, I guessed that because my HTML files were generic HTML that the need to install any web development tools from the workload component of the installer was unnecessary. I went back and installed this bit and Visual Studio behavior became as I expected it.
This already has a bunch of answers here, but a general way to easily boost Visual Studio is to clear your temp files.
Press the Windows Key and R, and enter 'temp'. Press enter, and provide any administrator permission if you need to. Then press Control A to select all, and hit the Del key. Remember to provide any administrator permissions, and if 'the item is already in use' then just press skip.
After this, Press Windows Key and R again, but this time type '%temp%'. Repeat the previous steps in the new directory.
Finally, empty the recycle bin.
This might not help a ton, but it should boost general performance.
My Visual Studio began crashing at start-up. In my search for finding a remedy, I found these two suggestions, but neither worked for me:
Launching Visual Studio while running in safe mode, and
Running repair on Visual Studio.
However, I found that if I logged into a different Windows account, Visual Studio was able to run from that account without crashing.
Here is an error code that that I observed in the crash report:
LCID: 1033
Can anyone provide a solution for returning my Visual Studio to working order?
For me it turned out to be the plugin that GitExtensions installed into Visual Studio 2013.
-- UPDATE: try this before uninstalling GitExtensions
#Enceradeira proposed in the comments to uncheck the Show current branch in Visual Studio option. In GitExtensions, you get there via Tools -> Settings -> Appearance:
-- END OF UPDATE
After uninstalling GitExtensions and reinstalling it with all VS plugin unselected my VS runs smoothly again.
I even put together a blog post about this issue because it bugged me so much.
Since you're able to run with another user login, something may be wrong with your local settings, you can try to reset them: devenv /resetsettings in Start menu -> Run.
Warning: this will restore visual studio to default settings.
In my case VS used to crash on a single solution. I resolved the problem by deleting the respective solutions's user file: SolutionName.suo
My colleague recently experienced a problem with Visual Studio 2013 crashing on start-up. Unfortunately, we found that the approach recommended in the answer by #Arun M did not solve the problem:
devenv.exe /ResetSettings
...however, using a different command line argument did:
devenv.exe /ResetUserData
An easy way to run devenv.exe is via the Visual Studio command prompt; on Windows 10, it can be found here:
Start Button => All Apps => Visual Studio 2013 => Visual Studio Tools =>
VS2013 x86 Native Tools Command Prompt
For more about these command line arguments for devenv.exe, see this answer to this related question: How do I truly reset every setting in Visual Studio 2012?. ⚠ In particular, please note the cautionary statement in that answer about the /ResetUserData command line argument!
Try to run VS as administrator. That's necessary in my case.
If coincident to these Visual Studio crashes you are getting "Heap corruption" (Exception code: 0xc0000005) errors in your Windows Application log (Faulting module name: WindowsCodecs.dll), here is something worth checking into: A faulty WIC component within Expression Blend can cause ALL versions of Visual Studio to crash upon launch, as well as cause Internet Explorer to crash upon visiting many, if not most sites. Even though Microsoft distributes this component, they call it a "non-Microsoft component". As such, a Visual Studio reinstall won't fix this,, an OS reinstall over existing Windows installation won't fix this, and a system file integrity check won't detect it.
If my case, the misbehaving codec was "C:\Program Files (x86)\Microsoft Expression\Common\Imaging\4.0.360.0\PSDCodec.dll", and simply unregistering this component got my Visual Studio working again from consistent startup launch crashes.
I post this in hopes this solution to one source of Visual Studio crashing might save others from the $500 Microsoft support incident fee and week of downtime this caused me.
I just changed the windows language in the bottom right to "EN", then started as admin. And it worked, interesting..
I had the very strange phenomenon that both Visual Studio 2010 and 2013 on a Windows 7 machine crashed when run in a remote desktop session, started from a Windows 10 pc. Debugging the crash showed a CultureNotFound exception. It was caused by regional settings on the Windows 10 pc, which could not be translated in something understood by Windows 7. I had language English(Belgium) with an Azerty keyboard. I added and selected English(UK) with an Azerty keyboard and the crashes disappeared. No other programs suffered from this.
For me it was being caused by Web Essentials and I was able to resolve by disabling it, restarting VS, enabling it back , restart again. Works now.
I had a crash on startup (or soon after startup, before opening any solution) occurring in git2-msvstfs.dll, caused by placing a 3GB temp file into a directory within my solution. Deleting the file fixed it.
Once I accidentally pressed a random key combination (maybe something like ctrl+', but I didn’t realize I was holding ctrl down so I forgot what keys I hit by the time I realized something bad had happened) that resulted in VS Professional 2017 15.3.5 crashing within half a minute. After relaunching, I found that VS would be interactive for a few seconds before it would crash within half a minute. It was really too fast for me to try to figure out what I had accidentally activated or for me to disable it before VS would crash. Also, it would even crash if I didn’t open any solution, so I figured it was not something that deleting a .vs (per project/solution Solution Explorer/open files state) folder would fix.
To fix, I followed Arun M’s comment and renamed my %LOCALAPPDATA%\Microsoft\VisualStudio\15.0_3f4d04be folder. You will need to adjust the path for the edition/version of VS that is crashing. On my machine, I think 15.0_3f4d04be is Professional and 15.0_0fed6c59 is VS Community Edition. You’ll probably have to guess based on the folder’s modification timestamp which is probably going to reflect the date you last used that edition of VS.
After renaming the versioned dotfolder, VS launched without crashing. It started with default settings but automatically restored some of my settings through the cloud sync stuff after a minute of running and it even remembered my account information so I didn’t need to sign in.
I did not need to rename my %LOCALAPPDATA%\Microsoft\VSCommon folder (which Arun M had also suggested).
I had a similar problem, both VS2015 and VS2013 would crash at startup. Tracked it down to an application I installed which put .net 4.7.2 on the system. Once i removed that app, removed .net, and reinstalled .net 4.6, Visual Studio started working again.
I have a blank property window that I can not get rid of in Visual Studio 2008 SP1. I have tried every thing to get rid of it.
If I close it it shows right back up after going into debug mode or restarting visual studio. I have tried every thing to fix all the way to reinstalling VS with no luck.
Does any one have a solution for this?
Use the following fix:
Close all instances of Visual Studio Navigate to the following directory (I am using 2008 – for a different version change the 9.0 to reflect the correct version number/folder)
"%userprofile%\Local Settings\Application Data\Microsoft\VisualStudio\9.0".
You should see four files:
toolbox.tbd
toolbox_reset.tbd
toolboxIndex.tbd
toolboxIndex_reset.tbd
Move these files to another folder (or, if you are very brave, delete them altogether. Note, this is very much a case of “Worked on my (colleague’s) PC” – do this at your own risk. Restart Visual Studio and hey presto, your Toolbox should be back to where it needs to be. The user in question did not have any custom items in his toolbox so I can only assume that the fix reverted the toolbox to the original Visual Studio state.
Click Window, Reset Window Layouts.
If that doesn't help, click Tools, Import and Export Settings, Reset all settings. (But backup your current settings)
One thing to try is via the Visual Studio 2008 command line you can run the following command.
devenv /resetsettings
This will restore to factory settings, this could clear up the issue, re-install wouldn't do this for you.