I had class yesterday for data structures and my professor was discussing the uses of binary trees, and some info on its levels. I'm starting to work on creating a binary search tree, and I want to include a print function to display level on a tree
Tree example:
3 is root. 3 has two childs, to the left is 2 and and its right is 5.
2 has a child node to its left, 1.
5 has 2 child nodes. 4 is its left child node and 6 is the right child node.
I want to print level 1 of the tree (the 2 and 5)
3
/ \
2 5
/ / \
1 4 6
I want to have a print function in my program to show a level in a tree, but I need some reason for doing that (my professor wants a reason, idk why and i didnt ask). Any reasons to show a level of the tree?
Does an balanced binary tree has an unique form?
For example, the node list [1,2,3,4,5]
It seems like following two forms are all qualified with the definition of balanced binary tree. Are they all correct?
2
/ \
1 4
/ \
3 5
3
/ \
1 4
\ \
2 5
No. There isn't. A balanced tree may have different order based on the order of operations made in order to get to it. Also, there are multiple ways to do a self balancing tree (Red-Black, AVL, Splay) - all result (usually) in different trees.
A simple counter example with two nodes on AVL tree:
insert(1)
insert(2)
Will result in no need for rebalancing, and the tree will be:
1
\
\
2
If you do it the other way around:
insert(2)
insert(1)
Again, no rebalancing is needed, but the result tree will be:
2
/
/
1
Both are valid AVL trees with the same elements, but as you can see - the form is not unique.
The structure of balanced binary search tree OR for that matter binary search tree is much dependent on the sequence of data you provide to it.
With AVL (self-balancing binary tree) you will yield a unique form; provided you have same sequence of data, that in your case is [1,2,3,4,5].
2
/ \
1 4
/ \
3 5
I had thought I understood BSTs.
That was until my Professor came along.
Let's say I have a BST:
2
/ \
1 3
Now if I were to insert 4, my tree would look like this:
2
/ \
1 3
\
4
but my Professor's tree would end up like this:
2
/ \
1 4
/ \
3 4
Basically, he finds where the new node should be placed and places it there. He then changes the value of the new node's parent to the new node's value and makes the left child of the parent what the original parent node used to be.
I have looked around online but can't find anyone doing this.
What kind of insertion technique is this? Am I missing something?
I don't think it would make a difference but this was specifically for AVL trees.
I think he is trying to keep the tree strictly binary ,i.e., each node has 0 or exactly 2 children.
As i understand, in the example, the first and second 4s are added in their places. A left rotation (required for balancing the avl tree) brings the final shape.
Your insertion of key "4" into a BST is completely right, I can assure you. This is the orthodox and the simplest way to insert elements into a BST.
I think that you've misunderstood your professor, because your third illustration is incorrect at least because of the fact that in BST no duplicates are allowed, and you have element "4" occurring twice.
is this possible that a node in the complete binary tree has just one child?
thanks
Can this be a complete binary tree?
23
/ \
12 15
/ \
9 11
/ \ \
10 5 13
OK, first to make the difference between a perfect and a complete binary tree. In a perfect binary tree every node has two children(if not a leaf) or no children(if a leaf). So a perfect binary tree of level N has totally 2^(N + 1) - 1 nodes. But if we talk about complete binary tree - this means every level, except the last is full, and the last level may not be full. Also in a complete binary tree, the last level nodes must be filled from left to right.
So if you talk about perfect binary tree, it is not possible. But if you mean the complete binary tree, it is possible to have only one child.
I would say it is possible:
*
/ \
/ \
* x
/ \ /
* * *
this is a
binary tree in which
every level, except possibly the last,
is completely filled, and all nodes
are as far left as possible
And node x has just one child.
Citing Wikipedia:
A complete binary tree is a binary
tree in which every level, except
possibly the last, is completely
filled, and all nodes are as far left
as possible.
Which means no.
From the other answers:
A complete binary tree is a binary tree in which every level, except possibly the last, is completely filled, and all nodes are as far left as possible.
23
/ \
12 15
/ \
9 11 <- not the last level, but not completely filled!
/ \ \
10 5 13 <- last level: not completely filled, but that's okay
So this example tree is not complete, according to this definition.
I'm trying to find the definition of a binary search tree and I keep finding different definitions everywhere.
Some say that for any given subtree the left child key is less than or equal to the root.
Some say that for any given subtree the right child key is greater than or equal to the root.
And my old college data structures book says "every element has a key and no two elements have the same key."
Is there a universal definition of a bst? Particularly in regards to what to do with trees with multiple instances of the same key.
EDIT: Maybe I was unclear, the definitions I'm seeing are
1) left <= root < right
2) left < root <= right
3) left < root < right, such that no duplicate keys exist.
Many algorithms will specify that duplicates are excluded. For example, the example algorithms in the MIT Algorithms book usually present examples without duplicates. It is fairly trivial to implement duplicates (either as a list at the node, or in one particular direction.)
Most (that I've seen) specify left children as <= and right children as >. Practically speaking, a BST which allows either of the right or left children to be equal to the root node, will require extra computational steps to finish a search where duplicate nodes are allowed.
It is best to utilize a list at the node to store duplicates, as inserting an '=' value to one side of a node requires rewriting the tree on that side to place the node as the child, or the node is placed as a grand-child, at some point below, which eliminates some of the search efficiency.
You have to remember, most of the classroom examples are simplified to portray and deliver the concept. They aren't worth squat in many real-world situations. But the statement, "every element has a key and no two elements have the same key", is not violated by the use of a list at the element node.
So go with what your data structures book said!
Edit:
Universal Definition of a Binary Search Tree involves storing and search for a key based on traversing a data structure in one of two directions. In the pragmatic sense, that means if the value is <>, you traverse the data structure in one of two 'directions'. So, in that sense, duplicate values don't make any sense at all.
This is different from BSP, or binary search partition, but not all that different. The algorithm to search has one of two directions for 'travel', or it is done (successfully or not.) So I apologize that my original answer didn't address the concept of a 'universal definition', as duplicates are really a distinct topic (something you deal with after a successful search, not as part of the binary search.)
If your binary search tree is a red black tree, or you intend to any kind of "tree rotation" operations, duplicate nodes will cause problems. Imagine your tree rule is this:
left < root <= right
Now imagine a simple tree whose root is 5, left child is nil, and right child is 5. If you do a left rotation on the root you end up with a 5 in the left child and a 5 in the root with the right child being nil. Now something in the left tree is equal to the root, but your rule above assumed left < root.
I spent hours trying to figure out why my red/black trees would occasionally traverse out of order, the problem was what I described above. Hopefully somebody reads this and saves themselves hours of debugging in the future!
All three definitions are acceptable and correct. They define different variations of a BST.
Your college data structure's book failed to clarify that its definition was not the only possible.
Certainly, allowing duplicates adds complexity. If you use the definition "left <= root < right" and you have a tree like:
3
/ \
2 4
then adding a "3" duplicate key to this tree will result in:
3
/ \
2 4
\
3
Note that the duplicates are not in contiguous levels.
This is a big issue when allowing duplicates in a BST representation as the one above: duplicates may be separated by any number of levels, so checking for duplicate's existence is not that simple as just checking for immediate childs of a node.
An option to avoid this issue is to not represent duplicates structurally (as separate nodes) but instead use a counter that counts the number of occurrences of the key. The previous example would then have a tree like:
3(1)
/ \
2(1) 4(1)
and after insertion of the duplicate "3" key it will become:
3(2)
/ \
2(1) 4(1)
This simplifies lookup, removal and insertion operations, at the expense of some extra bytes and counter operations.
In a BST, all values descending on the left side of a node are less than (or equal to, see later) the node itself. Similarly, all values descending on the right side of a node are greater than (or equal to) that node value(a).
Some BSTs may choose to allow duplicate values, hence the "or equal to" qualifiers above. The following example may clarify:
14
/ \
13 22
/ / \
1 16 29
/ \
28 29
This shows a BST that allows duplicates(b) - you can see that to find a value, you start at the root node and go down the left or right subtree depending on whether your search value is less than or greater than the node value.
This can be done recursively with something like:
def hasVal (node, srchval):
if node == NULL:
return false
if node.val == srchval:
return true
if node.val > srchval:
return hasVal (node.left, srchval)
return hasVal (node.right, srchval)
and calling it with:
foundIt = hasVal (rootNode, valToLookFor)
Duplicates add a little complexity since you may need to keep searching once you've found your value, for other nodes of the same value. Obviously that doesn't matter for hasVal since it doesn't matter how many there are, just whether at least one exists. It will however matter for things like countVal, since it needs to know how many there are.
(a) You could actually sort them in the opposite direction should you so wish provided you adjust how you search for a specific key. A BST need only maintain some sorted order, whether that's ascending or descending (or even some weird multi-layer-sort method like all odd numbers ascending, then all even numbers descending) is not relevant.
(b) Interestingly, if your sorting key uses the entire value stored at a node (so that nodes containing the same key have no other extra information to distinguish them), there can be performance gains from adding a count to each node, rather than allowing duplicate nodes.
The main benefit is that adding or removing a duplicate will simply modify the count rather than inserting or deleting a new node (an action that may require re-balancing the tree).
So, to add an item, you first check if it already exists. If so, just increment the count and exit. If not, you need to insert a new node with a count of one then rebalance.
To remove an item, you find it then decrement the count - only if the resultant count is zero do you then remove the actual node from the tree and rebalance.
Searches are also quicker given there are fewer nodes but that may not be a large impact.
For example, the following two trees (non-counting on the left, and counting on the right) would be equivalent (in the counting tree, i.c means c copies of item i):
__14__ ___22.2___
/ \ / \
14 22 7.1 29.1
/ \ / \ / \ / \
1 14 22 29 1.1 14.3 28.1 30.1
\ / \
7 28 30
Removing the leaf-node 22 from the left tree would involve rebalancing (since it now has a height differential of two) the resulting 22-29-28-30 subtree such as below (this is one option, there are others that also satisfy the "height differential must be zero or one" rule):
\ \
22 29
\ / \
29 --> 28 30
/ \ /
28 30 22
Doing the same operation on the right tree is a simple modification of the root node from 22.2 to 22.1 (with no rebalancing required).
In the book "Introduction to algorithms", third edition, by Cormen, Leiserson, Rivest and Stein, a binary search tree (BST) is explicitly defined as allowing duplicates. This can be seen in figure 12.1 and the following (page 287):
"The keys in a binary search tree are always stored in such a way as to satisfy the binary-search-tree property: Let x be a node in a binary search tree. If y is a node in the left subtree of x, then y:key <= x:key. If y is a node in the right subtree of x, then y:key >= x:key."
In addition, a red-black tree is then defined on page 308 as:
"A red-black tree is a binary search tree with one extra bit of storage per node: its color"
Therefore, red-black trees defined in this book support duplicates.
Any definition is valid. As long as you are consistent in your implementation (always put equal nodes to the right, always put them to the left, or never allow them) then you're fine. I think it is most common to not allow them, but it is still a BST if they are allowed and place either left or right.
I just want to add some more information to what #Robert Paulson answered.
Let's assume that node contains key & data. So nodes with the same key might contain different data.
(So the search must find all nodes with the same key)
left <= cur < right
left < cur <= right
left <= cur <= right
left < cur < right && cur contain sibling nodes with the same key.
left < cur < right, such that no duplicate keys exist.
1 & 2. works fine if the tree does not have any rotation-related functions to prevent skewness.
But this form doesn't work with AVL tree or Red-Black tree, because rotation will break the principal.
And even if search() finds the node with the key, it must traverse down to the leaf node for the nodes with duplicate key.
Making time complexity for search = theta(logN)
3. will work well with any form of BST with rotation-related functions.
But the search will take O(n), ruining the purpose of using BST.
Say we have the tree as below, with 3) principal.
12
/ \
10 20
/ \ /
9 11 12
/ \
10 12
If we do search(12) on this tree, even tho we found 12 at the root, we must keep search both left & right child to seek for the duplicate key.
This takes O(n) time as I've told.
4. is my personal favorite. Let's say sibling means the node with the same key.
We can change above tree into below.
12 - 12 - 12
/ \
10 - 10 20
/ \
9 11
Now any search will take O(logN) because we don't have to traverse children for the duplicate key.
And this principal also works well with AVL or RB tree.
Working on a red-black tree implementation I was getting problems validating the tree with multiple keys until I realized that with the red-black insert rotation, you have to loosen the constraint to
left <= root <= right
Since none of the documentation I was looking at allowed for duplicate keys and I didn't want to rewrite the rotation methods to account for it, I just decided to modify my nodes to allow for multiple values within the node, and no duplicate keys in the tree.
Those three things you said are all true.
Keys are unique
To the left are keys less than this one
To the right are keys greater than this one
I suppose you could reverse your tree and put the smaller keys on the right, but really the "left" and "right" concept is just that: a visual concept to help us think about a data structure which doesn't really have a left or right, so it doesn't really matter.
1.) left <= root < right
2.) left < root <= right
3.) left < root < right, such that no duplicate keys exist.
I might have to go and dig out my algorithm books, but off the top of my head (3) is the canonical form.
(1) or (2) only come about when you start to allow duplicates nodes and you put duplicate nodes in the tree itself (rather than the node containing a list).
Duplicate Keys
• What happens if there's more than one data item with
the same key?
– This presents a slight problem in red-black trees.
– It's important that nodes with the same key are distributed on
both sides of other nodes with the same key.
– That is, if keys arrive in the order 50, 50, 50,
• you want the second 50 to go to the right of the first one, and the
third 50 to go to the left of the first one.
• Otherwise, the tree becomes unbalanced.
• This could be handled by some kind of randomizing
process in the insertion algorithm.
– However, the search process then becomes more complicated if
all items with the same key must be found.
• It's simpler to outlaw items with the same key.
– In this discussion we'll assume duplicates aren't allowed
One can create a linked list for each node of the tree that contains duplicate keys and store data in the list.
The elements ordering relation <= is a total order so the relation must be reflexive but commonly a binary search tree (aka BST) is a tree without duplicates.
Otherwise if there are duplicates you need run twice or more the same function of deletion!