I have scenario where we want to replace multiple double quotes to single quotes between the data, but as the input data is separated with "comma" delimiter and all column data is enclosed with double quotes "" got an issue and the same explained below:
The sample data looks like this:
"int","","123","abd"""sf123","top"
So, the output would be:
"int","","123","abd"sf123","top"
tried below approach to get the resolution, but only first occurrence is working, not sure what is the issue??
sed -ie 's/,"",/,"NULL",/g;s/""/"/g;s/,"NULL",/,"",/g' inputfile.txt
replacing all ---> from ,"", to ,"NULL",
replacing all multiple occurrences of ---> from """ or "" or """" to " (single occurrence)
replacing 1 step changes back to original ---> from ,"NULL", to ,"",
But, only first occurrence is getting changed and remaining looks same as below:
If input is :
"int","","","123","abd"""sf123","top"
the output is coming as:
"int","","NULL","123","abd"sf123","top"
But, the output should be:
"int","","","123","abd"sf123","top"
You may try this perl with a lookahead:
perl -pe 's/("")+(?=")//g' file
"int","","123","abd"sf123","top"
"int","","","123","abd"sf123","top"
"123"abcs"
Where input is:
cat file
"int","","123","abd"""sf123","top"
"int","","","123","abd"""sf123","top"
"123"""""abcs"
Breakup:
("")+: Match 1+ pairs of double quotes
(?="): If those pairs are followed by a single "
Using sed
$ sed -E 's/(,"",)?"+(",)?/\1"\2/g' input_file
"int","","123","abd"sf123","top"
"int","","NULL","123","abd"sf123","top"
"int","","","123","abd"sf123","top"
In awk with your shown samples please try following awk code. Written and tested in GNU awk, should work in any version of awk.
awk '
BEGIN{ FS=OFS="," }
{
for(i=1;i<=NF;i++){
if($i!~/^""$/){
gsub(/"+/,"\"",$i)
}
}
}
1
' Input_file
Explanation: Simple explanation would be, setting field separator and output field separator as , for all the lines of Input_file. Then traversing through each field of line, if a field is NOT NULL then Globally replacing all 1 or more occurrences of " with single occurrence of ". Then printing the line.
With sed you could repeat 1 or more times sets of "" using a group followed by matching a single "
Then in the replacement use a single "
sed -E 's/("")+"/"/g' file
For this content
$ cat file
"int","","123","abd"""sf123","top"
"int","","","123","abd"""sf123","top"
"123"""""abcs"
The output is
"int","","123","abd"sf123","top"
"int","","","123","abd"sf123","top"
"123"abcs"
sed s'#"""#"#' file
That works. I will demonstrate another method though, which you may also find useful in other situations.
#!/bin/sh -x
cat > ed1 <<EOF
3s/"""/"/
wq
EOF
cp file stack
cat stack | tr ',' '\n' > f2
ed -s f2 < ed1
cat f2 | tr '\n' ',' > stack
rm -v ./f2
rm -v ./ed1
The point of this is that if you have a big csv record all on one line, and you want to edit a specific field, then if you know the field number, you can convert all the commas to carriage returns, and use the field number as a line number to either substitute, append after it, or insert before it with Ed; and then re-convert back to csv.
I have a file which looks like this (file.txt)
{"key":"AJGUIGIDH568","rule":squid:111-some_random_text_here
{"key":"TJHJHJHDH568","rule":squid:111-some_random_text_here
{"key":"YUUUIGIDH566","rule":squid:111-some_random_text_here
{"key":"HJHHIGIDH568","rule":squid:111-some_random_text_here
{"key":"ATYUGUIDH556","rule":squid:111-some_random_text_here
{"key":"QfgUIGIDH568","rule":squid:111-some_random_text_here
I want to loop trough this line by line an extract the key values.
so the result should be like ,
AJGUIGIDH568
AJGUIGIDH568
YUUUIGIDH566
HJHHIGIDH568
ATYUGUIDH556
QfgUIGIDH568
So I wrote a code like this to loop line by line and extract the value between {"key":" and ","rule": because key values is in between these 2 patterns.
while read p; do
echo $p | sed -n "/{"key":"/,/","rule":,/p"
done < file.txt
But this is not working. can someone help me to figure out me this. Thanks in advance.
Your sample input is almost valid json. You could tweak it to make it valid and then extract the values with jq with something like:
sed -e 's/squid/"squid/' -e 's/$/"}/' file.txt | jq -r .key
Or, if your actual input really is valid json, then just use jq:
jq -r .key file.txt
If the "random-txt" may include double quotes, making it difficult to massage the input to make it valid json, perhaps you want something like:
awk '{print $4}' FS='"' file.txt
or
sed -n '/{"key":"\([^"]*\).*/s//\1/p' file.txt
or
while IFS=\" read open_brace key colon val _; do echo "$val"; done < file.txt
For the shown data, you can try this awk:
awk -F '"[:,]"' '{print $2}' file
AJGUIGIDH568
TJHJHJHDH568
YUUUIGIDH566
HJHHIGIDH568
ATYUGUIDH556
QfgUIGIDH568
With the give example you can simple use
cut -d'"' -f4 file.txt
Assumptions:
there may be other lines in the file so we need to focus on just the lines with "key" and "rule"
the only text between "key" and "rule" is the desired string (eg, squid never shows up between the two patterns of interest)
Adding some additional lines:
$ cat file.txt
{"key":"AJGUIGIDH568","rule":squid:111-some_random_text_here
ignore this line}
{"key":"TJHJHJHDH568","rule":squid:111-some_random_text_here
ignore this line}
{"key":"YUUUIGIDH566","rule":squid:111-some_random_text_here
ignore this line}
{"key":"HJHHIGIDH568","rule":squid:111-some_random_text_here
ignore this line}
{"key":"ATYUGUIDH556","rule":squid:111-some_random_text_here
ignore this line}
{"key":"QfgUIGIDH568","rule":squid:111-some_random_text_here
ignore this line}
One sed idea:
$ sed -nE 's/^(.*"key":")([^"]*)(","rule".*)$/\2/p' file.txt
AJGUIGIDH568
TJHJHJHDH568
YUUUIGIDH566
HJHHIGIDH568
ATYUGUIDH556
QfgUIGIDH568
Where:
-E - enable extended regex support (and capture groups without need to escape sequences)
-n - suppress printing of pattern space
^(.*"key":") - [1st capture group] everything from start of line up to and including "key":"
([^"]*) - [2nd capture group] everything that is not a double quote (")
(","rule".*)$ - [3rd capture group] everything from ",rule" to end of line
\2/p - replace the line with the contents of the 2nd capture group and print
Suppose I have text as:
This is a sample text.
I have 2 sentences.
text is present there.
I need to replace whole text between two 'text' words. The required solution should be
This is a sample text.
I have new sentences.
text is present there.
I tried using the below command but its not working:
sed -i 's/text.*?text/text\
\nI have new sentence/g' file.txt
With your shown samples please try following. sed doesn't support lazy matching in regex. With awk's RS you could do the substitution with your shown samples only. You need to create variable val which has new value in it. Then in awk performing simple substitution operation will so the rest to get your expected output.
awk -v val="your_new_line_Value" -v RS="" '
{
sub(/text\.\n*[^\n]*\n*text/,"text.\n"val"\ntext")
}
1
' Input_file
Above code will print output on terminal, once you are Happy with results of above and want to save output into Input_file itself then try following code.
awk -v val="your_new_line_Value" -v RS="" '
{
sub(/text\.\n*[^\n]*\n*text/,"text.\n"val"\ntext")
}
1
' Input_file > temp && mv temp Input_file
You have already solved your problem using awk, but in case anyone else will be looking for a sed solution in the future, here's a sed script that does what you needed. Granted, the script is using some advanced sed features, but that's the fun part of it :)
replace.sed
#!/usr/bin/env sed -nEf
# This pattern determines the start marker for the range of lines where we
# want to perform the substitution. In our case the pattern is any line that
# ends with "text." — the `$` symbol meaning end-of-line.
/text\.$/ {
# [p]rint the start-marker line.
p
# Next, we'll read lines (using `n`) in a loop, so mark this point in
# the script as the beginning of the loop using a label called `loop`.
:loop
# Read the next line.
n
# If the last read line doesn't match the pattern for the end marker,
# just continue looping by [b]ranching to the `:loop` label.
/^text/! {
b loop
}
# If the last read line matches the end marker pattern, then just insert
# the text we want and print the last read line. The net effect is that
# all the previous read lines will be replaced by the inserted text.
/^text/ {
# Insert the replacement text
i\
I have a new sentence.
# [print] the end-marker line
p
}
# Exit the script, so that we don't hit the [p]rint command below.
b
}
# Print all other lines.
p
Usage
$ cat lines.txt
foo
This is a sample text.
I have many sentences.
I have many sentences.
I have many sentences.
I have many sentences.
text is present there.
bar
$
$ ./replace.sed lines.txt
foo
This is a sample text.
I have a new sentence.
text is present there.
bar
Substitue
sed -i 's/I have 2 sentences./I have new sentences./g'
sed -i 's/[A-Z]\s[a-z].*/I have new sentences./g'
Insert
sed -i -e '2iI have new sentences.' -e '2d'
I need to replace whole text between two 'text' words.
If I understand, first text. (with a dot) is at the end of first line and second text at the beginning of third line. With awk you can get the required solution adding values to var s:
awk -v s='\nI have new sentences.\n' '/text.?$/ {s=$0 s;next} /^text/ {s=s $0;print s;s=""}' file
This is a sample text.
I have new sentences.
text is present there.
I am working with a fasta file and need to add line-specific text to each of the headers. So for example if my file is:
>TER1
AGCATGCTAGCTAGTCGACTCGATCGCATGCTC
>TER2
AGCATGCTAGCTAGACGACTCGATCGCATGCTC
>URC1
AGCATGCTAGCTAGTCGACTCGATCGCATGCTC
>URC2
AGCATGCTACCTAGTCGACTCGATCGCATGCTC
>UCR3
AGCATGCTAGCTAGTCGACTCGATGGCATGCTC
I want a while loop that will read through each line; for those with a > at the start, I want to append |population: plus the first three characters after the >. So line one would be:
>TER1|population:TER
etc.
I can't figure out how to make this work. Here my best attempt so far.
filename="testfasta.fa"
while read -r line
do
if [[ "$line" == ">"* ]]; then
id=$(cut -c2-4<<<"$line")
printf $line"|population:"$id"\n" >>outfile
else
printf $line"\n">>outfile
fi
done <"$filename"
This produces a file with the original headers and following line each on a single line.
Can someone tell me where I'm going wrong? My if and else loop aren't working at all!
Thanks!
You could use a while loop if you really want,
but sed would be simpler:
sed -e 's/^>\(...\).*/&|population:\1/' "$filename"
That is, for lines starting with > (pattern: ^>),
capture the next 3 characters (with \(...\)),
and match the rest of the line (.*),
replace with the line as it was (&),
and the fixed string |population:,
and finally the captured 3 characters (\1).
This will produce for your input:
>TER1|population:TER
AGCATGCTAGCTAGTCGACTCGATCGCATGCTC
>TER2|population:TER
AGCATGCTAGCTAGACGACTCGATCGCATGCTC
>URC1|population:URC
AGCATGCTAGCTAGTCGACTCGATCGCATGCTC
>URC2|population:URC
AGCATGCTACCTAGTCGACTCGATCGCATGCTC
>UCR3|population:UCR
AGCATGCTAGCTAGTCGACTCGATGGCATGCTC
Or you can use this awk, also producing the same output:
awk '{sub(/^>.*/, $0 "|population:" substr($0, 2, 3))}1' "$filename"
You can do this quickly in awk:
awk '$1~/^>/{$1=$1"|population:"substr($1,2,3)}{}1' infile.txt > outfile.txt
$ awk '$1~/^>/{$1=$1"|population:"substr($1,2,3)}{}1' testfile
>TER1|population:TER
AGCATGCTAGCTAGTCGACTCGATCGCATGCTC
>TER2|population:TER
AGCATGCTAGCTAGACGACTCGATCGCATGCTC
>URC1|population:URC
AGCATGCTAGCTAGTCGACTCGATCGCATGCTC
>URC2|population:URC
AGCATGCTACCTAGTCGACTCGATCGCATGCTC
>UCR3|population:UCR
AGCATGCTAGCTAGTCGACTCGATGGCATGCTC
Here awk will:
Test if the record starts with a > The $1 looks at the first field, but $0 for the entire record would work just as well in this case. The ~ will perform a regex test, and ^> means "Starts with >". Making the test: ($1~/^>/)
If so it will set the first field to the output you are looking for (using substr() to get the bits of the string you want. {$1=$1"|population:"substr($1,2,3)}
Finally it will print out the entire record (with the changes if applicable): {}1 which is shorthand for {print $0} or.. print the entire record.
I have a file that includes lines below separated by comma ;
filename.txt
usernameA,10,10
usernameB,20,20
usernameA,10,10
usernameB,20,20
usernameC,10,10
I just want to parse the file and add numbers by username if occurs multiple times , so the result should be ;
usernameA=40
usernameB=80
usernameC=20
How can i achive this result using Bash script ?
Thank you,
$ awk -F, '{a[$1]+=$2+$3}END{for(x in a)print x "=" a[x]}' file
usernameA=40
usernameB=80
usernameC=20
This works for the given example.