I am struggling to configure the Wowza Media Server on Amazon Server.
Success: - I have Successfully Installed Wowza Server on Amazon and Streaming is working with the Internal Private IP. Now, I have changed the Port from Default 1935 to Port 80. Now Binding with port 80 with Internal Private IP is working Fine i.e. 10.8..:80 this works fine.
Problem: - Now, When I configure port 80 instead of my private 10.8.. to my Public IP 54.76..
binding fails and i got error Bind Failed and Could not assign port. I have tried all the solution posted on stack overflow and also reinstalled the application several times.
Solution Tried : -
1) Restarting the Amazon and Wowza Server.
2) To verify firewall, I have installed IIS server and hosted dummy application it works with both private and public IP on port 80.
3) Installed Correct Java Version i.e. 1.8
4) Stopped the IIS server and Running Wowza Server.
Help is appreciated. Thanks in Advance.
Ensure you modify the security group settings and that all the appropriate ports are defined there. I would also test playback with the aws url they provide to ensure it isn't an odd routing issue. Lastly, you can review the quick-start guide for this process to ensure all basis are covered.
Lastly there are a ton of pre-built AMI's just for this purpose as well.
Related
I had EC2 server where I was running my existing application. The EC2 instance was on private subnet and ELB was created in public subnet with access to particular VPN IP. So whenever I was on VPN, I was able to access my application and if I am outside that VPN IP then I wasn't able to access the application.
Now I have created EKS cluster and I am deploying my application using kubectl with docker image of the application. Weird thing is the application works fine whenever I am NOT on VPN (I tweaked security group to allow all traffic from all IPs) and whenever I am on VPN, I receive "ERR_CONNECTION_RESET" in chrome and curl shows - empty response received from server.
Till now I have tried below things. As I am relatively new with EKS, I am not able to find much.
1. Same security group applied - Not resolving
2. Checked logs of all pods - whichever pods I received from "kubectl get po --all-namespaces" - No issues showing up
3. Checked /var/log/messages
4. Tried to change application port
5. kubectl get events not showing anything on why server is sending back empty response.
6. Tried to SSH to node and tried to curl localhost:30080 and it works fine, but when tried to curl from my machine (which is on VPN), it fails with empty response.
Please again note that, the application runs totally fine when I am outside VPN. Further my old application (that is on EC2) runs fine with VPN.
Thanks in advance!
Finally found the issue was with the corporate VPN which was blocking all ports other than 80 and 443. When I was creating the service, I wanted to have ELB to expose port 5000. So I was thinking elb-host:5000 will point to dev service nodeport which was 30080. This was perfectly working when I was NOT on the VPN. But when I was connecting the site using VPN, corporate traffic was blocking port 5000 on ELB. After I changed the port to 80, it started working as expected.
While using nginx, it was creating ELB with port 80 instead of my intended port 5000. I didn't notice that port change and thought that this is happening due to IP blocking.
I have the following setup in my DEV environment which is running on Windows 10 (which should be irrelevant).
Homestead with Virtual box to develop my Laravel applications
on my local OS I have a IBM Domino server running as dev1.mydomain.local
I'm trying to access the REST API on the Domino server from my Laravel installations. At the moment I'm getting 404 errors when trying because the domino server is not available from within the VirtualBox of Homestead.
Here is the network configuration of the homestead virtual box
Both webservers Domino and nginx on the virtual box are running on standard ports
Here is the ifconfig output of the virtual box
How can I make that possible?
UPDATE:
It just came to me that I am able to access the Domino server with LDAP, so perhaps changing the http and https port of the Domino server is already the answer...
I will test that and then get back here...
Changing the Port of the Domino server to 8080 enable me to access the server's REST API
dev1.mydomain.local:8080/api/data/
The connection to the local machine seems to be enable through the VirtualBox's second network adapter and the my call to the REST API got confused with the 2 web servers listening to the same port on localhost(127.0.0.1)
Update
although I was kind of able to connect to the server using the address above, still left me with the problem that authentication wasn't possible. In order to do so (and I have not the slightest idea why), I had to change to the local IP address of my PC to access the REST services
http://192.168.0.155:8080/api/data
If someone could explain that I would be happy :-)
I installed Mule Community Server on AWS cloud and it is functioning properly. When I use http end point and invoke Mule services from browser on my Amazon EC2 machine they work. When I access them from outside, the request timeout. The end points are not bound to local host but mapped to 0.0.0.0:8081. I have checked all firewall settings using amaozon security group and set permission for all. Yet it doesnt work. I am able to access the Windows IIS http server on the same machine but not mule on port 8081. Any clues would help.
Hope this doesn't sound rude, but did you disable the windows firewall, or allow 8081 through the windows firewall?
So I have this issue. The issue is I am unable to connect to my red5 server from a remote client. I also have not found any tutorials on how to install red5 so that remote clients can connect to it. However, here is what I have done...
Inside My MXML Flex File I try to connect to the computers IP that the server is running on(My Server is running from within Eclipse). The line for connecting looks like this netConnection.connect(rtmp://192.168.2.12/myApp, true);
All that happens is after a lot of minutes go by, I just get NetConnection.Connect.Failed and there is no log being output by Eclipse. Almost like it never even registers the connection that the remote client is trying to make.
The other interesting thing is that I am ABLE to connect to my Red5 Server using a different computer within my local home network just fine. But only when it is remote I am unable to connect.
I have changed my Red5-web.properties file and added this...
webapp.contextPath=/myApp
webapp.virtualHosts=*, 127.0.0.1, localhost, 192.168.2.14, 174.122.104.3
The 174 one is my website where the Flex Swf Resides on.
I think maybe somehow my computer is not setup or configured to allow these remote connections and is rejecting them or something, I'm not quite sure why a remote client can't connect. Does anyone have any idas?
Your help is greatly appreciated.
You may uninstall the red5 and reinstall it.
When it ask you the server ip address type your server's LAN adress (192.168.2.* or 10.0.0.* whatever). This solved my problem.
In my opinion, if you have at least one domain name that you own, the best way for you to go is to set up an Apache Http Server to your server machine, and create subdomains for both red5, rtmp and rtmpt. Make the Apache handle your incoming requests, and decide their correct routing there.
In case you don't own a domain, or the previous way is too time-taking to set up and get it work, you should just make sure that the ip address you're trying to connect to is not an internal IP.
In your example above you are trying to connect from the client to a 192.168... address. If you try to connect to it from within your LAN, it works, since that ip there is registered to your machine.
But when you take your notebook to your neighbor, and using his internet connection to access your site and connect to red5, the client (flex application) will also try to connect to that 192.168..., and your neighbor's router has no idea about your LAN, probably it doesn't have such an internal IP address either, but SURELY cannot connect to your server.
So instead of using 192.168... in your connection string, you should try using your external IP address (the 174... one):
netConnection.connect("rtmp://174.122.104.3/myApp", true);
This will work always, as far as you have a static IP address.
Also make sure, that your red5 server is accessible over the 80 port, or if it's not, specify the correct port number there.
For that you can do following thing...
These steps I took and it's solved my problem...
1.During the installation, you must have given ip 127.0.0.1 (localhost) and port :5080
2.firstly open the port (5080 and 1935) on firewall.
Visit http://windows.microsoft.com/en-in/windows/open-port-windows-firewall#1TC=windows-7
3.Now to go red5->conf->red5.properties and open this file in notepad++. (or any other editor)
4.repalce http.host and rtmp.host ip with your ip address (ipv4)
5.start the red5 service.
6.Now check http://yourip:5080
It will start working, and you can access it from other system also (in the same network Obviously )
i hosted an apache server by changing few details in the httpd.conf file, used this tutorial. i also did port forwarding so that the server is able to respond behind the wireless router (firewall), it worked completely fine ( i checked by typing the ip and port number from some other host outside the network). now i am trying to run servlets for which i need tomcat server. i have installed tomcat but i am unable to access the server from another host that is not on the same network. could somebody please guide as to how can i achieve this.
I guess I would go with The Apache-Tomcat Connector and use it to connect your new tomcat instance to your Apache.
I did the same thing just as I for apache server, except that I changed the listening port to something else. added that entry in the router. incorporated tomcat in eclipse and then started the sample project. using whatismyip.com, i got the ip address. i could access my webserver from elsewhere...