AWK between 2 patterns - first occurence - bash

Question

I am having this example of ini file. I need to extract the names between 2 patterns Name_Z1 and OBJ=Name_Z1 and put them each on a line.
The problem is that there are more than one occurences with Name_Z1 and OBJ=Name_Z1 and i only need first occurence.
[Name_Z5]
random;text
Names;Jesus;Tom;Miguel
random;text
OBJ=Name_Z5
[Name_Z1]
random;text
Names;Jhon;Alex;Smith
random;text
OBJ=Name_Z1
[Name_Z2]
random;text
Names;Chris;Mara;Iordana
random;text
OBJ=Name_Z2
[Name_Z1_Phone]
random;text
Names;Bill;Stan;Mike
random;text
OBJ=Name_Z1_Phone
My desired output would be:
Jhon
Alex
Smith
I am currently writing a more ample script in bash and i am stuck on this. I prefer awk to do the job.
My greatly appreciation for who can help me. Thank you!
For Wintermute solution: The [Name_Z1] part looks like this:
[CAB_Z1]
READ_ONLY=false
FilterAttr=CeaseTime;blank|ObjectOfReference;contains;511047;512044;513008;593026;598326;CL5518;CL5521;CL5538;CL5612;CL5620|PerceivedSeverity;=;Critical;Major;Minor|ProbableCause;!=;HOUSE ALARM;IO DEVICE|ProblemText;contains;AIRE;ALIMENTA;BATER;CONVERTIDOR;DISTRIBUCION;FUEGO;HURTO;MAINS;MALLO;MAYOR;MENOR;PANEL;TEMP
NAME=CAB_Z1
And the [Name_Z1_Phone] part looks like this:
[CAB_Z1_FUEGO]
READ_ONLY=false
FilterAttr=CeaseTime;blank|ObjectOfReference;contains;511047;512044;513008;593026;598326;CL5518;CL5521;CL5538;CL5612;CL5620|PerceivedSeverity;=;Critical;Major;Minor|ProbableCause;!=;HOUSE ALARM;IO DEVICE|ProblemText;contains;FUEGO
NAME=CAB_Z1_FUEGO
The fix should be somewhere around the "|PerceivedSeverity"
Expected Output:
511047
512044
513008
593026
598326
CL5518
CL5521
CL5538
CL5612
CL5620

Answer 1

This should work:
sed -n '/^\[Name_Z1/,/^OBJ=Name_Z1/ { /^Names/ { s/^Names;//; s/;/\n/g; p; q } }' foo.txt
Explanation: Written readably, the code is
/^\[Name_Z1/,/^OBJ=Name_Z1/ {
/^Names/ {
s/^Names;//
s/;/\n/g
p
q
}
}
This means: In the pattern range /^\[Name_Z1/,/^OBJ=Name_Z1/, for all lines that match the pattern /^Names/, remove the Names; in the beginning, then replace all remaining ; with newlines, print the whole thing, and then quit. Since it immediately quits, it will only handle the first such line in the first such pattern range.
EDIT: The update made things a bit more complicated. I suggest
sed -n '/^\[CAB_Z1/,/^NAME=CAB_Z1/ { /^FilterAttr=/ { s/^.*contains;\(.*\)|PerceivedSeverity.*$/\1/; s/;/\n/g; p; q } }' foo.txt
The main difference is that instead of removing ^Names from a line, the substitution
s/^.*contains;\(.*\)|PerceivedSeverity.*$/\1/;
is applied. This isolates the part between contains; and |PerceivedSeverity before continuing as before. It assumes that there is only one such part in the line. If the match is ambiguous, it will pick the one that appears last in the line.

Answer 2

An (g)awk way that doesn't need a set number of fields(although i have assumed that contains; will always be on the line you need the names from.
(g)awk '(x+=/Z1/)&&match($0,/contains;([^|]+)/,a)&&gsub(";","\n",a[1]){print a[1];exit}' f
Explanation
(x+=/Z1/) - Increments x when Z1 is found. Also part of a
condition so x must exist to continue.
match($0,/contains;([^|]+)/,a) - Matches contains; and then captures everything after
up to the |. Stores the capture in a. Again a
condition so must succeed to continue.
gsub(";","\n",a[1]) - Substitutes all the ; for newlines in the capture
group a[1].
{print a[1];exit}' - If all conditions are met then print a[1] and exit.
This way should work in (m)awk
awk '(x+=/Z1/)&&/contains/{split($0,a,"|");y=split(a[2],b,";");for(i=3;i<=y;i++)
print b[i];exit}' file

Answer 3

sed -n '/\[Name_Z1\]/,/OBJ=Name_Z1$/ s/Names;//p' file.txt | tr ';' '\n'
That is sed -n to avoid printing anything not explicitly requested. Start from Name_Z1 and finish at OBJ=Name_Z1. Remove Names; and print the rest of the line where it occurs. Finally, replace semicolons with newlines.

Answer 4

Awk solution would be
$ awk -F";" '/Name_Z1/{f=1} f && /Names/{print $2,$3,$4} /OBJ=Name_Z1/{exit}' OFS="\n" input
Jhon
Alex
Smith
OR
$ awk -F";" '/Name_Z1/{f++} f==1 && /Names/{print $2,$3,$4}' OFS="\n" input
Jhon
Alex
Smith
-F";" sets the field seperator as ;
/Name_Z1/{f++} matches the line with pattern /Name_Z1/ If matched increment {f++}
f==1 && /Names/{print $2,$3,$4} is same as if f == 1 and maches pattern Name with line if true, then print the the columns 2 3 and 4 (delimted by ;)
OFS="\n" sets the output filed seperator as \n new line
EDIT
$ awk -F"[;|]" '/Z1/{f++} f==1 && NF>1{for (i=5; i<15; i++)print $i}' input
511047
512044
513008
593026
598326
CL5518
CL5521
CL5538
CL5612
CL5620

Answer 5

Here is a more generic solution for data in group of blocks.
This awk does not need the end tag, just the start.
awk -vRS= -F"\n" '/^\[Name_Z1\]/ {n=split($3,a,";");for (i=2;i<=n;i++) print a[i];exit}' file
Jhon
Alex
Smith
How it works:
awk -vRS= -F"\n" ' # By setting RS to nothing, one record equals one block. Then FS is set to one line as a field
/^\[Name_Z1\]/ { # Search for block with [Name_Z1]
n=split($3,a,";") # Split field 3, the names and store number of fields in variable n
for (i=2;i<=n;i++) # Loop from second to last field
print a[i] # Print the fields
exit # Exits after first find
' file
With updated data
cat file
data
[CAB_Z1_FUEGO]
READ_ONLY=false
FilterAttr=CeaseTime;blank|ObjectOfReference;contains;511047;512044;513008;593026;598326;CL5518;CL5521;CL5538;CL5612;CL5620|PerceivedSeverity;=;Critical;Major;Minor|ProbableCause;!=;HOUSE ALARM;IO DEVICE|ProblemText;contains;FUEGO
NAME=CAB_Z1_FUEGO
data
awk -vRS= -F"\n" '/^\[CAB_Z1_FUEGO\]/ {split($3,a,"|");n=split(a[2],b,";");for (i=3;i<=n;i++) print b[i]}' file
511047
512044
513008
593026
598326
CL5518
CL5521
CL5538
CL5612
CL5620

Answer 6

The following awk script will do what you want:
awk 's==1&&/^Names/{gsub("Names;","",$0);gsub(";","\n",$0);print}/^\[Name_Z1\]$/||/^OBJ=Name_Z1$/{s++}' inputFileName
In more detail:
s==1 && /^Names;/ {
gsub ("Names;","",$0);
gsub(";","\n",$0);
print
}
/^\[Name_Z1\]$/ || /^OBJ=Name_Z1$/ {
s++
}
The state s starts with a value of zero and is incremented whenever you find one of the two lines:
[Name_Z1]
OBJ=Name_Z1
That means, between the first set of those lines, s will be equal to one. That's where the other condition comes in. When s is one and you find a line starting with Names;, you do two substitutions.
The first is to get rid of the Names; at the front, the second is to replace all ; semi-colon characters with a newline. Then you print it out.
The output for your given test data is, as expected:
Jhon
Alex
Smith