In Visual Studio (any year), you can open a file by using "Go to Definition/Implementation". When you do this, the file is opened in a tab on the far right side of the screen:
I find this to be annoying. What's the point of opening the tab way over there? Why not just open it here?
(A) is there some reason or benefit for it opening way the eff over there?
(B) is there a way to have it open amongst the rest of the tabs?
A: Depends, if it's from your code than it's not very beneficial but if it's not then it helps you separate from the files in the project and the files in different libraries
B: Yes,click that little icon and the tab will be moved to the rest of the tabs
I've used Visual Studio for years and have just started work on a C++ project in XCode, and I'm finding some aspects of file navigation in XCode frustrating.
If I have several files open, and I use the mouse swipe left or right to reveal a previous/next file, the editor always repositions the window to the top of the file, instead of where I was looking at it previously. Is there any way to keep the file positioned at previous line?
In Visual Studio I often used bookmarks within a file, and then keyboard shortcuts to move forwards and backwards through them. Is there an equivalent in XCode?
Is there any shortcut to show a list of the currently open files so that I can view one of them? (I miss the Visual Studio tabs.)
I have the same complaints and have not found a good solution, but there are a couple of things I have done.
I have placed commented out keywords throughout my code. For example, when I was implementing iAds into my project I added "//iads imp" into my code, thus I was able to quickly do a command+f and type in "iads imp" and I would go to that section of code.
The other solution I use for this is pragma marks:
According to this site,
"Pragma mark is simply a way to organize your methods in the method list pop up button in Xcode "
So I'm brand new to TextMate. I use the file drawer on the side for my whole rails app. But I find my self clicking through a bunch of files before I find the one I'm looking for, or piece of code I'm looking for. This causes every file I've looked at to open in a new tab. Before long I have 25 tabs open, which completely defeats the purpose of tabs in the first place.
Is there a way to make it so that you can look at a file and have it not open a new tab? Then I could have tabs for the 1 or 2 files I'm working with, and still poke around the others at will.
There have been plugins written for TextMate over the years that add a Quick Look feature to the file pane, like Quick Look in the OS X Finder.
Here's one recently-made plugin that that you could try: https://github.com/belkadan/textmate-quicklook
Xcode finally added tabs but the problem is that they behave very strange. For example they will keep a tab open only if it was opened to a new tab.
If you open a file just by clicking in the project tree, Xcode will close your tab as soon as you are clicking on another file in the tree.
Is is possible to make them behave like real tabs and prevent Xcode from reusing them? How?
I use a method similar to franks:
In Preferences > Navigation (or Preferences > General in versions of Xcode prior to 5) you can set Optional Navigation to Uses Separate Tab
Now opt-clicking a file in the file navigator will open it in a new tab
Better yet, opt-clicking links in the code opens the destination file in a new tab
The big feature missing is swapping to an already open tab containing the file if there is one (or staying in the current one).
UPDATE for 2020:
Finally, almost 10 years later, Xcode 12.x now appears to mostly resolve the issue described here. There is a new Navigation Style option in the Navigation settings panel that controls this behavior.
The behavior has some new quirks/design-choices that seem to make sense, but I'm still getting used to the new experience. For example, a tab will get re-used unless the file in that tab has been edited recently; such a tab is indicated with an italics title.
PREVIOUS ANSWER
I don't think you can currently get the behavior you desire (or I desire). While the tabs work like Safari, they don't work like tabs in other popular IDEs (Visual Studio or Eclipse). And for me this kind of sucks.
In general, I expect IDE tabs to keep more than 1 file open. So if I click a file in the project tree, I expect that it will switch to the tab I have opened with that file - if I have already opened it. Instead, XCode 4 changes the current tab to the file I clicked - making 2 tabs with the same file. Having 2 tabs with the same file is fairly useless.
This forces the user to scan the tab bar first to see if the file is currently opened; if it's not opened then you can look to the project tree. But if you click in the project tree first (which is what I tend to do) then you get punished because you will have just killed a tab.
This isn't really an answer insofar as it contains a solution; I mostly just want to join in the griping. But upvoting will make you feel better and prove Apple wrong. :)
The problem with Xcode 4's implementation of tabs is that Apple has implemented them as workspace tabs. In other words, creating a new tab essentially creates a new workspace, each with its own sub-panes with their configurations, etc. It's essentially a whole environment in each tab. There are a number of problems with this choice.
This differs from most IDE/text editors' implementation of file tabs wherein a tab (generally) represents a single file, and each file has its own tab.
The problem with workspace tabs is there are only so many potential different workspaces we could benefit from, severely limiting the actual use of tabs in this way. Beyond this, the additional workspaces just become a liability, introducing more things the user of the application needs to concern him/herself with: for example, what the navigator view is, what editor mode is active (standard, assistant, version), whether the debug console is open, etc. etc. Suddenly switching to a new tab means you now have to worry about getting the environment back in the form you need it, because there's a good chance the other tab wasn't left in the state you expect to find it in. This actually discourages the use of tabs because it introduces more work in the workflow.
File tabs don't have this problem (not counting special cases like split view panes) because all that's changing is the file you're looking at, not your whole environment. Moreover, if implemented properly, file tabs work great as an immediate history, allowing one to quickly switch back to a file that was worked in recently, with little effort. The only way to do this in Xcode is to explicitly set up a new tab environment for each file you want to work with, but you have to be careful not to change the file in that tab or your file all of a sudden becomes lost: again, more work for the user.
Workspace tabs are also significantly heavier-weight than file tabs, because there is much more to remember and switching workspaces involves much more than switching files.
The truth is (and I think most will agree with me on this), to a developer, file tabs are much more useful than workspace tabs, and as it stands Xcode still lacks a proper implementation of this feature that many would consider basic required functionality in an IDE/editor.
Xcode->Preferences->General->Double Click Navigation and from the list, choose Uses Separate Tab.
Well, not a real answer but my personal workaround. The real problem for me is, that a file opened in a tab goes away so easily in xcode 4. Finding a file again can be time-consuming, so I like them to be in a tab and stay there.
I solved this (somehow) for me by exactly identifying the actions I do which cause the tab to switch to another file and replace them by their equivalent actions which open a new tab instead.
Instead of single-clicking a file in the navigator, I always double-click which I have set to open a new tab
Most time I do not use the navigator, as it has a different state of opened and closed folders in each tab. Not useful for me. So I switched to using Option ⌥ Command ⌘ O. When opening a file from this list I keep ShiftOption ⌥ pressed. In the small window appearing I choose 'new tab'.
When clicking on links in code I press ShiftOption ⌥ Command ⌘, too, and open in new tab.
I keep two fixed tabs around for editing target-related settings and to view build results. I completely disabled all automatic tab switching in the prefs, because I noticed this distracted me to much.
I would really love to get something like the xcode 3 favorites bar in xcode 4, this was so simple to use..
I imagine my answer won't bubble up for a while, but if you want this to work like visual studio or intellij (or at least closer)
Preferences->General->Double Click Navigation->Uses a separate tab
Double Clicking a file now will stop opening it in a new window and open it in a new tab.
Single is still dumb and takes over your tab. But if you get used to double clicking (which I was already) this will save you some headaches. I suppose.
I absolutely hate how tabs work in Xcode. However, the only workaround i found that works decent is using the OSX tabs shortcuts:
CTRL + CMD + ->
CTRL + CMD + <-
I found my way in Preferences-Behaviors!
I hated Xcode 4 first for the tab issues discussed here, mainly because the debug information kept opening new files in tabs and changing the navigator
in Behaviors you can define a Debug tab and make the Run and Build jump there in various ways. in the Debug tab I give more space to navigators left and bottom
for similar reasons I have a Find tab, too
the other tabs are for files I am writing in. I start them with the .h which is usually small enough so I need only one view, and then with single clicks in the navegator I open 2-3 versions of the .cpp file so I can set them to the locations where the recent hot spots in the file are. then I close the navigators in those tabs
this does not invalidate the care and tricks given in the other answers here, but makes them far less hard
happy coding!
I found out that when pressing option a.k.a. alt when opening files in the navigator, you will jump to the tab already open with the file and a new tab will open in case it was not yet open.
This technique also works when opening files via cmdshift-O and opening the suggestion with option-enter in stead of simply enter...
Now, if there would be some way to make this the default, i.e. the need to keep pressing option all the time would be removed, that would be a big step forward.
Also I use Behaviors to keep my tabs from being recycled after test or build failures.
(Like other people, I totally mislike Xcode's tab behavior. Apple should take a look at IntelliJ...)
xcode tab bar is so suck, I think Apple should enhance the feature of the tab navigation to avoid followed 3 points.
1. double click a file will let xcode open another tab if it has already been there.
2. for more tabs, the tab will become small and thus I don't know which file in which tab, I want the tab show full name
3. for even more tabs, new tabs will be hidden, instead of two lines of tabs. I want to it show two lines of tab bars.
If you have the tab bar enabled (View/Show Tab Bar) and you double click a file, it appears in it's own window, with a single tab (Be sure the Tab Bar is enabled in both the new and old (main) windows).
Now all you have to do is drag that new window from its tab and drop it into the tab bar of your main window.
It will stay docked as a separate tab, showing that file.
To change the file open in that new tab, go Project / Reveal in Project Navigator, which opens the project navigator at the left hand side.
Tabs in Xcode 4 work like tabs elsewhere on Mac OS X, for example in Safari and Terminal.
When coding in Xcode, I double-click a file in the "Groups and files" list, and it opens a new editor window. I have several of these open at once.
Until today.
Today, when I double-click a file in the list, it opens the file in the last editor window I was using, meaning I can only have one editor window up at any one time.
I guess I've switched some option somewhere by mistake. How do I get it back to the way I like it?
I'm using Xcode 3.2.5
In the top right of the editing window is an icon that says "grouped", perhaps you clicked on it by accident.
Click on it so it says "ungrouped", and you'll be back to opening multiple windows.
perhaps preferences>General>Open Counterpart in same Editor