I am creating a Basic Weblogic server domain(11g, version 10.3.5.0 ). And in the JDK selection Window, in Available JDKs , ' JRockit SDK 1.7.0_55 # C:\Program Files\Java\jdk1.7.0_55' is selected..
The domain gets created, now i check the 'Start Admin Server' checkbox and click 'Done' . The process of starting server runs in the cmd, but it halts with the following error::
starting weblogic with Java version:
Unrecognized option: -jrockit
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
My Jdk(64-bit) is installed correctly according to me, JAVA_HOME and those things are correct. jrockit comes bundled with JDK , so why this error, any leads will be very helpful..
Thanks :)
I believe that WebLogic 10.3.5 only supports Suns Java JDK 1.6.0_24+ OR JRockit R28.1.3-1.6.0_24+.
It appears as though Weblogic 10.3.5 is not compatible with Java 7, try re-installing/configurring with a Java 6 version installed.
Source: Oracle Installation Docs
Related
I have Windows 10 and I followed this guide to install Spark and make it work on my OS, as long as using Jupyter Notebook tool. I used this command to instantiate the master and import the packages I needed for my job:
pyspark --packages graphframes:graphframes:0.8.1-spark3.0-s_2.12 --master local[2]
However, later, I figured out that any worker wasn't instantiated according to the aforementioned guide and my tasks were really slow. Therefore, taking inspiration from this, since I could not find any other way to connect workers to the Cluster manager due to the fact it was run by Docker, I tried to set up everything manually with the following commands:
bin\spark-class org.apache.spark.deploy.master.Master
The master was correctly instantiated, so I continued by the next command:
bin\spark-class org.apache.spark.deploy.worker.Worker spark://<master_ip>:<port> --host <IP_ADDR>
Which returned me the following error:
Using Spark's default log4j profile: org/apache/spark/log4j-defaults.properties
21/04/01 14:14:21 INFO Master: Started daemon with process name: 8168#DESKTOP-A7EPMQG
21/04/01 14:14:21 ERROR SparkUncaughtExceptionHandler: Uncaught exception in thread Thread[main,5,main]
java.lang.ExceptionInInitializerError
at org.apache.spark.unsafe.array.ByteArrayMethods.<clinit>(ByteArrayMethods.java:54)
at org.apache.spark.internal.config.package$.<init>(package.scala:1006)
at org.apache.spark.internal.config.package$.<clinit>(package.scala)
at org.apache.spark.deploy.master.MasterArguments.<init>(MasterArguments.scala:57)
at org.apache.spark.deploy.master.Master$.main(Master.scala:1123)
at org.apache.spark.deploy.master.Master.main(Master.scala)
Caused by: java.lang.reflect.InaccessibleObjectException: Unable to make private java.nio.DirectByteBuffer(long,int) accessible: module java.base does not "opens java.nio" to unnamed module #60015ef5
at java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:357)
at java.base/java.lang.reflect.AccessibleObject.checkCanSetAccessible(AccessibleObject.java:297)
at java.base/java.lang.reflect.Constructor.checkCanSetAccessible(Constructor.java:188)
at java.base/java.lang.reflect.Constructor.setAccessible(Constructor.java:181)
at org.apache.spark.unsafe.Platform.<clinit>(Platform.java:56)
... 6 more
From that moment on, none of the commands I used to run before were working anymore, and they returned the message you can see. I guess I messed up some Java stuff, but I do not understand what and where, honestly.
My java version is:
java version "16" 2021-03-16
Java(TM) SE Runtime Environment (build 16+36-2231)
Java HotSpot(TM) 64-Bit Server VM (build 16+36-2231, mixed mode, sharing)
I got the same error just now, the issue seems with Java version.
I installed java, python, spark etc. All latest versions... !
Followed steps mentioned in the below link..
https://phoenixnap.com/kb/install-spark-on-windows-10
Got the same error as you.. !
Downloaded Java SE 8 version from Oracle site..
https://www.oracle.com/java/technologies/javase/javase-jdk8-downloads.html
Downloaded jdk-8u281-windows-x64.exe
Reset the JAVA_HOME.
Started spark-shell - it opened perfectly without any issues.
FYI: I don't have neither java or spark experience, if anyone feels something is wrong please correct me. Just that it worked for me, so providing the same solution here.. :)
Thanks,
Karun
I got a similar error on MacOS. The problem was with Java (I was using JDK 17), had to downgrade or use a different version.
Ended up using this:
https://adoptium.net/releases.html?variant=openjdk11
Download and install. Might have to remove your JDK17 version.
Easiest solution :
Latest version of Java (JDK) is not supported by Spark.
Please try installing JDK version 8. This will solve the error.
I just installed a fresh copy of weblogic server and OSB.
After the successful installation of weblogic 10.3.6 on the quick start screen I tried to configure domain. however the screen doesn't processed any further giving the error in the screenshot below.
Also, in eclipse, when i try to add the server, It prompts me to create a domain, but that doesn't work either.
The error am getting in the console is:
Error: Could not create the Java Virtual Machine.
Error: A fatal exception has occurred. Program will exit.
Java HotSpot(TM) 64-Bit Server VM warning: ignoring option
MaxPermSize=128m; support was removed in 8.0
Unrecognized VM option 'UseSpinning'
It looks like Java 8 is being picked up elsewhere on your system.
Check to see if you have Java 8 installed and look at you path environment variable.
That warning you are getting is from Java 8. 10.3.6 would use Java 5 or 6...
When I try to start the the deployment manager in WebSphere Application Server I'm getting the following error:
00000001 SDKUtils
A ADML0004E: An exception occurred when attempting to expand variable $(JAVA_HOME) com.ibm.wsspi.runtime.variable.
UndefinedVariableException: Undefined variable JAVA_HOME
at com.ibm.ws.runtime.component.VariableMapImpl.expand(VariableMapImpl.j
First of all you cannot set third party Java SDK for traditional WebSphere Application Server. For WAS 8.5.5.x you can only select from IBM Java 6 and IBM Java 7 which must be downloaded from IBM and installed via Installation Manager. So don't play with JAVA_HOME variable manually.
Once you install Java 7 for WAS, you can use managesdk command line tool to switch Java for given profile and server.
See also:
Java 7.1 in IBM Websphere
managesdk command
since we can not start the deployment manger or default server, there is a way to solve this problem that is add the JAVA_HOME into varibles.xml file which is under server folder. path : Installserver/profile/config/node/cell/server
Please give some more information like OS, windows, or linux, or what.
If I understand correctly you'll use the jdk of the WAS installation elsewhere?
Under Windows set JAVA_HOME accordingly within the System environment properties. logout / login after this may be a good idea.
Under linux use: export JAVA_HOME=/opt/ibm/pathtoWAS/java
I would do this within .profile and maybe it's helpful to set the PATH to the jdk too!
I am facing strange issue with sonarqube 5.0.1 , one one of the machine it is not starting. Here is the error log - sonar.log -
--> Wrapper Started as Daemon
Launching a JVM...
Unable to start JVM: No such file or directory (2)
JVM exited while loading the application.
JVM Restarts disabled. Shutting down.
<-- Wrapper Stopped
Machine is x86_64 GNU/Linux - Centos 5.1.
this box has java installed -
$java -version
java version "1.6.0_45"
Java(TM) SE Runtime Environment (build 1.6.0_45-b06)
Java HotSpot(TM) 64-Bit Server VM (build 20.45-b01, mixed mode)
The same sonarqube package works on another machine.
Any idea what could be the issue here?
Thanks.
Issue was in the wrapper.conf where the java wrapper command was not getting resolved. It worked if I give the absolute path - ‘wrapper.java.command=/path/to/my/jdk/bin/java’
This could be an issue with an environment on a host.. not sure.
Few things that helped me in troubleshooting this -
log level changed to DEBUG in wrapper.conf
comments given in the wrapper.conf!
Thanks all for chiming in! Appreciate your inputs.
1.Just close all running jvm from task manager
2. Change the port of the sonar runner from the properties
I had the same symptoms (wrapper starts then immediately stops).
I tried these steps and finally succeeded (on a windows 10 pc):
1) in wrapper.conf, specified the java command:
wrapper.java.command=C:\Program Files\Java\jdk1.7...\bin\java.exe
That did not help.
2) Finally this fixed the problem. In the windows Services, open the Sonar service and then open Log On tab.
Changed the Log On to myself as follows:
I was facing the same issue on sonar startup. After reading this post , i modified the JDK path in below file and it works.
Modify the JDK path in wrapper.conf
wrapper.java.command=%JAVA_HOME%/bin/java
Install jdk 11
sudo yum install java-11-openjdk -y
sudo alternatives --config java
Select the JDK 11 version
Set the JDK 11 version in wrapper.conf
vi /opt/sonar/conf/wrapper.conf
wrapper.java.command=/usr/lib/jvm/java-11-openjdk-11.0.13.0.8-3.el8_5.x86_64/bin/java
Could you verify the Java version on the machine starting?
Java 6 is no more supported http://docs.sonarqube.org/display/SONAR/Requirements#Requirements-Prerequisite but from your error message, I don't know if this is the problem you meet.
Solution 1
Set java path globally
Solution 2
Go to sonarqube-{version}/conf directory
Edit wrapper.conf file
Replace wrapper.java.command=java with wrapper.java.command= {path-to-your-java-bin-directory}/java
eg: wrapper.java.command=/usr/java/bin/java
Try using a relative path, if your Sonar Folder is located in the same root folder as your jdk. For me my sonar and jdk are both under "Program Files", which has restrictive permission, hence the error.
E.g:
wrapper.java.command=../../../Java/jdk-11.0.4/bin/java
I am trying to run the JDeveloper Integrated Weblogic server (11.1.1.5) on Windows 7 x64 and keep running into this error from within JDeveloper:
[Starting Server Instance IntegratedWebLogicServer]
#### Server Instance IntegratedWebLogicServer could not be started: Error starting Server Instance.
I found this in the createDefaultDomain.log file:
Log File: C:\Users\mologan\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\o.j2ee.adrs\CreateDefaultDomain.log
Label: JDEVADF_11.1.1.5.0_GENERIC_110409.0025.6013
Product Home: C:\Oracle\Middleware\jdeveloper\jdev\
Domain: C:\Users\mologan\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\DefaultDomain
"C:\Oracle\Middleware\oracle_common\common\bin\wlst.cmd" "C:\Users\mologan\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\o.j2ee.adrs\CreateDefaultDomain.py"
Process started
Elapsed time: 94 ms
When I try to run this command from the command line I get the following:
C:\Users\mologan>"C:\Oracle\Middleware\oracle_common\common\bin\wlst.cmd" "C:\Users\mologan\AppData\Roaming\JDeveloper\system11.1.1.5.37.60.13\o.j2ee.adrs\CreateDefaultDomain.py"
CLASSPATH=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jrf_11.1.1/jrf-wlstman.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADF-SH~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADFSCR~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\mdswlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\AUDITW~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\IGFWLS~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jps-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jrf-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAP_~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAUT~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\ossoiap.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OSSOIA~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OVDWLS~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\SSLCON~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\wsm-wlst.jar
PATH=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\native;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\bin;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\WINDOWS\System32\WindowsPowerShell\v1.0\;C:\Oracle\Middleware\jdk160_24\;C:\Program Files (x86)\Microsoft Application Virtualization Client;C:\Program Files\ThinkPad\Bluetooth Software\;C:\Program Files\ThinkPad\Bluetooth Software\syswow64;C:\Program Files\Broadcom\WHL\;C:\Program Files\Broadcom\WHL\syswow64;C:\Program Files\Broadcom\WHL\SysWow64\;C:\Program Files\Broadcom\WHL\SysWow64\syswow64;C:\Program Files\TortoiseSVN\bin;C:\ant\\bin;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8 Your environment has been set.
CLASSPATH=C:\Oracle\MIDDLE~1\patch_wls1035\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.5.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;;C:\Oracle\MIDDLE~1\ORACLE~1/modules/oracle.jrf_11.1.1/jrf-wlstman.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADF-SH~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADFSCR~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\mdswlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\AUDITW~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\IGFWLS~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jps-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jrf-wlst.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAP_~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAUT~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\ossoiap.jar;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OSSOIA~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OVDWLS~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\SSLCON~1.JAR;C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\wsm-wlst.jar;C:\Oracle\MIDDLE~1\utils\config\10.3\config-launch.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbynet.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\common\derby\lib\derbytools.jar;;
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Error: ADRS_DOMAIN_PASSWORD environment variable not set.
Exiting WebLogic Scripting Tool.
C:\Users\mologan>
Has anyone seen this type of error before? I have no idea how to fix it and its getting really frustrating. All help is much appreciated!
Cheers,
Morris
Open CreateDefaultDomain.py file and set ADRS_DOMAIN_PASSWORD.
import os
os.putenv('ADRS_DOMAIN_PASSWORD', 'welcome1')
if not 'ADRS_DOMAIN_PASSWORD' in os.environ:
print("Error: ADRS_DOMAIN_PASSWORD environment variable not set.")
exit()
I found this answer:
Domain creation fails after installing on new Windows version (7338577, 7339920, 8654914)
When JDeveloper is installed on a newly released Windows version, it is possible that Jython, which is used by Oracle WebLogic Server's script tool, does not recognize the Windows version and instead assumes that it is running in a Linux environment.
This causes domain creation to fail with the following error in CreateDefaultDomain.log:
wlst > Failed to get environment, environ will be empty: (0, 'Failed to /
execute command ([\'sh\', \'-c\', \'env\']): java.io.IOException: Cannot run /
program "sh": CreateProcess error=2, The system cannot find the file /
specified')/
# wlst > Error: ADRS_DOMAIN_PASSWORD environment variable not set.
The workaround is to obtain a patch for jython-modules.jar, or to run on a supported version of Windows.
Original source:
http://www.oracle.com/technetwork/developer-tools/jdev/knownissues-097654.html#dep1
I'm using JDeveloper 12.2.1.3.0.
Have the same problem, and all I had to to is exit the JDeploper, kill the Java process in the Task Manager, and restarting JDev again.